Enhancement of lipase production from hydrocarbons by mutation of Trichosporon fermentans

Lipase high-producing mutants with petroleum products as carbon sources were successfully induced from Trichosporon fermentans WU-C12 by ultraviolet (UV) light irradiation. In the first mutation step, one mutant strain, PU-30, derived from strain WU-C12 was selected. The productivity of extracellular lipase of PU-30 reached 58 units (U)/ml in the medium containing kerosene, being approximately twice the productivity of the parental strain WU-C12. In the second mutation step, the mutant strain 2PU-18 was induced from strain PU-30. In medium containing kerosene, gas oil and liquid paraffin, the 2PU-18 produced 70 U/ml, 62 U/ml and 60 U/ml of extracellular lipase, respectively. When various n-alkanes (C₈-C₁₈) were used as carbon sources, the parental strain WU-C12 produced more than 20 U/ml of lipase only from C₉-C₁₂ alkanes, but 2PU-18 could produce more than 50 U/ml of lipase from C₈-C₁₈ alkanes. When cultivated for 3 days in medium containing liquid paraffin, the activity ratios of extracellular lipase to total lipase and the values of extracellular lipase activity per dry-cell weight were 0.44 and 0.65 U/mg for WU-C12, and 0.62 and 1.82 U/mg for 2PU-18, respectively. These results indicate that the mutant strain 2PU-18 is superior in both total lipase productivity and permeability of lipase to the parental strain WU-C12 when petroleum products are used as carbon sources. Correspondence to: S. Usami     

Comparing submerged and solid-state fermentation of agro-industrial residues for the production and characterization of lipase by Trichoderma harzianum

Lipase production by Trichoderma harzianum was evaluated in submerged fermentation (SF) and solid-state fermentation (SSF) using a variety of agro-industrial residues. Cultures in SF showed the highest activity (1.4 U/mL) in medium containing 0.5 % (w/v) yeast extract, 1 % (v/v) olive oil and 2.5 C:N ratio. This paper is the first to report lipase production by T. harzianum in SSF. A 1:2 mixture of castor oil cake and sugarcane bagasse supplemented with 1 % (v/w) olive oil showed the best results among the cultures in SSF (4 U/g ds). Lipolytic activity was stable in a slightly acidic to neutral pH, maintaining 50 % activity after 30 min at 50 °C. Eighty percent of the activity remained after 1 h in 25 % (v/v) methanol, ethanol, isopropanol or acetone. Activity was observed with vegetable oils (olive, soybean, corn and sunflower) and long-chain triacylglycerols (triolein), confirming the presence of a true lipase. The results of this study are promising because they demonstrate an enzyme with interesting properties for application in catalysis produced by fermentation at low cost.     

Optimization of extracellular lipase production by Geotrichum sp. using factorial design

Response surface methodology was employed to study the effects of carbon source (soy oil, olive oil and glucose) and nitrogen source concentrations (corn steep liquor and NH(4)NO(3)) on the lipase production by Geotrichum sp. The experiment included a 2(4) central composite rotatable design (CCRD) and four others 2(3) CCRD. According to the responses from the experimental designs, the effects of each variable were calculated and the interactions between them were determined. The response surface methodology was applied for the optimization of the nutrient concentrations in the culture medium for the enzyme production, at 30 degrees C. The optimum medium composition for lipase production by Geotrichum sp. was ammonium nitrate 2.1-2.5%, corn steep liquor 13-15% and soy oil 0.6% as carbon source, which lead to a lipase activity of about 20 U/ml. Using olive oil as carbon source, the optimum composition was ammonium nitrate 0.8-1%, corn steep liquor 13-15% and olive oil 0.6%, leading to an activity of 17 U/ml.     

Production of lipase free of citrinin by Penicillium citrinum

Lipase (Glycerol ester hydrolase E.G. 3.1.1.3) from a Brazilian strain of Penicillium citrinum free of the mycotoxin citrinin has been investigated. Citrinin production was inhibited by using culture medium containing olive oil, soybean oil and corn oil as carbon sources. Potassium concentration and pH play an important role in citrinin production. Potassium concentration lower than 30 mM and pH below 4.5 inhibited the mycotoxin production. P. citrinum produced lipase free of extraneous proteins and citrinin when cultured using, as nitrogen source, ammonium sulphate (lipase activity of 7.88 U/mg) and yeast extract (lipase activity of 4.95 U/mg) with olive oil as carbon source. This data is relevant to the larger scale production of lipases for food technology applications, from Penicillium citrinum.     

Lipase Induction in Mucor hiemalis

The influence on lipase induction in Mucor hiemalis of different types of triglycerides containing mainly oleic acid (olive oil), erucic acid (mustard oil), or saturated fatty acids of 8 to 16 carbons (coconut oil) was studied. The fungus was grown in shake flasks in a fermentation medium containing peptone, minerals, and glucose or one of the oils as the carbon source. Maximum lipase was produced when the initial pH of the fermentation medium was kept at 4.0. Addition of Ca²⁺ to the medium did not increase lipase production. The optimum pH for activity of both the mycelial and extracellular lipases was found to be 7.0. The fungus produced a significant amount of lipase in the presence of glucose, but the lipase activity increased markedly when olive oil was added to the medium at the beginning of the fermentation. Addition of olive oil at a later stage did not induce as much enzyme. Studies with washed mycelia showed that a greater amount of lipase was released when olive oil was present than when glucose was present. Among the various types of triglycerides used as the carbon source, olive oil was found to be most effective in inducing the lipase. Olive oil and mustard oil fatty acids inhibited the lipase more than those of coconut oil. The lipase induced by a particular type of triglyceride did not seem to be specific for the same triglyceride, nor was it inhibited specifically by it. Irrespective of the triglyceride used in the fermentation medium, the lipase produced was most active against coconut oil triglyceride, and this specificity, as shown by lipase activities in an n-heptane system, was not found to be due to a better emulsification of this oil. The lipase of M. hiemalis can be considered to be both constitutive and inducible.     

Influence of carbon and nitrogen sources on lipase production by a newly isolated Candida viswanathii strain

Microorganisms can produce lipases with different biochemical characteristics making necessary the screening of new lipase-producing strains for different industrial applications. In this study, 90 microbial strains were screened as potential lipase producers using a sensitive agar plate method with a suitable medium supplemented with Tween 20 and also a liquid culture supplemented with olive oil. The highest cell growth and lipase production for Candida viswanathii were observed in triolein and oleic acid when used as the only pure carbon source. Renewable low-cost triacylglycerols supported the best cell growth, and olive oil was found to be the best inducer for lipase production (19.50 g/L and 58.50 U). The selected conditions for enzyme production were found with yeast extract as nitrogen source and 1.5 % (w/v) olive oil (85.70 U) that resulted in a good cell growth yield (Y_X/S?=?1.234 g/g) and lipase productivity (1.204 U/h) after 72 h of shake-flask cultivation. C. viswanathii lipase presented high hydrolytic activity on esters bonds of triacylglycerols of long-chain, and this strain can be considered an important candidate for future applications in chemical industries.     

Carbon source impact on Yarrowia lipolytica KKP 379 lipase production

The production of lipases by microorganisms is strongly influenced by the culture conditions. The optimum culture conditions for enzyme production are strain- and species-dependent. The aim of this study was to evaluate the impact of the carbon source used in the culture medium on the profile of lipases produced by Yarrowia lipolytica KKP 379. We observed a different pattern of extracellular and cell-bound lipase production, which was the highest in the early exponential phase. The extracellular lipase activity increased in the late exponential phase due to the lower accumulation of lipase molecules in cell walls. The best carbon source for extracellular lipase production by Y. lipolytica KKP 379 was olive oil. Glucose, dodecane and olive oil had a positive effect on biomass yield. Dodecane and/or glycerol utilization in microbiological lipase production was possible, but this process could not proceed without the addition of some activators such as olive oil in the cultivation medium.     

Optimization for producing cell-bound lipase from <Emphasis Type="Italic">Geotrichum</Emphasis> sp. and synthesis of methyl oleate in microaqueous solvent

An integrated optimization strategy involving a combination of different designs was employed to optimize producing conditions of cell-bound lipase (CBL) from Geotrichum sp. Firstly, it was obtained by a single factorial design that the most suitable carbon source was a mixture of olive oil and citric acid and the most suitable nitrogen source was a mixture of corn steep liquor and NH₄NO₃. Then, the Plackett–Burman design was used to evaluate the effects of 13 variables related to CBL production, and three statistically significant variables namely, temperature, olive oil concentration, and NH₄NO₃ concentration, were selected. Subsequently, the levels of the three variables for maximum CBL production were determined by response surface analysis as follows: 1.64% (v/v) olive oil, 1.49% (w/v) NH₄NO₃, and temperature 33.00°C. Such optimization resulted in a high yield of CBL at 23.15 U/ml, an enhanced 4.45-fold increase relative to the initial result (5.2 U/ml) in shake flasks. The dried CBL was used to synthesize methyl oleate in microaqueous hexane, resulting in 94% conversion after 24 h, and showed reusability with 70% residual activity and 69% conversion after eight cycles of batch operation, which indicating that CBL, as a novel and natural form of immobilized enzyme, can be effectively applied in repeated synthesis of methyl oleate in a microaqueous solvent.     

Purification of extracellular lipases from Trichosporon fermentans WU-C12

Two types of extracellular lipases (I and II) from Trichosporon fermentans WU-C12 were purified by acetone precipitation and successive chromatographies on Butyl-Toyopearl 650 M, Toyopearl HW-55F and Q-Sepharose FF. The molecular weight of lipase I was 53 kDa by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and 160 kDa by gel filtration, while that of lipase II was 55 kDa by SDS-PAGE and 60 kDa by gel filtration. For the hydrolysis of olive oil, the optimum pH and temperature of both the lipases were 5.5 and 35°C, respectively. The lipases showed stable activities after incubation at 30°C for 24 h in a pH range from 4.0 to 8.0. The thermostability of lipase I for 30 min at a reaction pH of 5.5 was up to 40°C, while that of lipase II under the same conditions was up to 50°C. Both lipases could hydrolyze the 1-, 2-, and 3-positions of triolein, and cleave all three ester bonds, regardless of the position in the triglyceride.     

Effect of culture conditions on lipase production by Fusarium solani in batch fermentation

Lipase (Glycerol ester hydrolase EC 3.1.1.3.) from a Brazilian strain of Fusarium solani FSI has been investigated. The effect of different carbon sources and trace elements added to basal medium was observed with the aim of improving enzyme production. Lipase specific activity was highest (0.45 U mg(-1)) for sesame oil. When this medium was supplemented with trace elements using olive oil, corn oil and sesame oil the lipase specific activity increased to 0.86, 1.89 and 1.64 U mg(-1), respectively, after 96 h cultivation without any considerable biomass increase. The Km of this lipase using pNPP (p-nitrophenylpalmitate) as substrate, was 1.8 mM with a Vmax of 1.7 micromol min(-1) mg protein(-1). Lipase activity increased in the presence of increasing concentrations of hexane and toluene. In contrast, incubation of this enzyme with water-soluble solvents decreased its activity after 10% concentration (v/v) of the solvent. The lipase activity was stable below 35 degrees C but above this temperature activity losses were observed.     

Physiology of lipase formation inPenicillium candidum

Penicillium candidum grew and produced lipase in a culture medium supplemented with 0.2% olive oil. Significant enzyme production required the presence of olive, oil and was prevented by cycloheximide. Polyacrylamide gel electrophoresis of filtrates from olive oil fermentations gave a single band of lipase activity (MW 80 KDa). Among the olive oil components only oleate allowed significant lipase production. Other carboxylic and saturated fatty acids containing similar or lower numbers of carbon atoms, did not cause derepression of lipase formation.     

Optimization of medium for lipase production by Acinetobacter haemolyticus from healthy human skin

A lipase producing Acinetobacter haemolyticus TA106 was isolated from healthy human skin of tribal population. The maximum activity of 55 U/ml was observed after medium optimization using the "one variable at a time" and the statistical approaches. The optimal composition of the medium was determined as (% w/v or v/v): tryptone--1, yeast extract--0.5, sodium chloride-1, olive oil-1, Tween-80 1, manganese sulphate--5 mM, sucrose--1, pH-7. It was found that maximum production occurred in late log phase, i.e., after 72 h and at 200 rpm. From factorial design and statistical analysis, it was found that pH, temperature, salt, inoculum density and aeration significantly affected the lipase production. It was also noted that inoculum density of 3% (v/v), sucrose (1% w/v) and manganese sulphate (5 mM) displayed maximum lipase activity of 55 U/ml by conventional as well as statistical method. Optimization studies also indicated the increase in specific activity from 0.2 U/mg to 6.7 U/mg.     

A Novel Olive Oil Degrading Thermoactinomyces Species with a High Extremely Thermostable Lipase Activity

A filamentous, Gram‐positive, spore forming aerobic bacterium was isolated from olive oil contaminated soil (Al Koura, Lebanon) on rhodamine agar plates at 60 °C. The isolate, HRK‐1 produced large quantities of an extracellular thermostable lipase which degrades olive oil. It was primarily classified as a Thermoactinomyces sp. due to the filamentous structure of its cells that bear one spore each on an un‐branched sporophore, the resistance of its spores to boiling, utilisation of sucrose as a carbon source and production of dark pigments. The isolate grew optimally at a temperature of 60 °C, a pH of 7.3 and an orbital shaking of 250 rpm. It showed an efficient olive oil degrading ability. No traces of triolein were detected after a 36‐h cultivation. A concentration of 10 % [v/v] olive oil did not inhibit its growth. Lipase production was constitutive, and did not depend on the presence of olive oil. The optimum concentration of olive oil for lipase activity was 1 % [v/v], and the activity was not enhanced at higher concentrations, but on the contrary, a decrease in enzyme activity was recorded. The lipase of HRK‐1 was preliminarily characterised in the crude cell‐free supernatant with a specific activity of 0.14 U/mg. It has an optimum activity at 60 °C and a pH of 8.0. This lipolytic enzyme showed resistance to boiling and to a wide range of metallic ions and inhibitors. The formation of this heat‐stable lipase started in the early exponential growth phase, while a maximum extracellular enzyme activity was detected at the end of the decline phase, when most of the cells appeared as spherical spores. The exceptionally high activity of lipase (2.37 U/ml) produced by HRK‐1 measured in the cell free supernatant clearly indicated the commercial importance of this isolate, especially after it showed great stability at elevated temperatures.     

Gene cloning,overexpression and characterization of a novel organic solvent tolerant and thermostable lipase from Galactomyces geotrichum Y05

Although the lipase of Geotrichum candidum has been extensively reported, little attention has been focused on molecular genetic and biochemical characterizations of Galactomyces geotrichum lipases. A lipase gene from G. geotrichum Y05 was cloned from both genomic DNA and cDNA sources. Nucleotide sequencing revealed that the ggl gene has an ORF of 1692 bp without any introns, encoding a protein of 563 amino acid residues, including a potential signal sequence of 19 amino acid residues. The amino acid sequence of this lipase showed 86% identity to lipase of Trichosporon fermentans WU-C12. The mature lipase gene was subcloned into pPIC9K vector, and overexpressed in methylotrophic Pichia pastoris GS115. Active lipase was accumulated to the level of 100.0 U/ml (0.4 mg/ml) in the shake-flask culture, 10.4-fold higher than the activity of the original strain (9.6 U/ml). This yield dramatically exceeds that previously reported with 23–50 U/ml, 0.06 mg/ml and 0.2 mg/ml. The purified lipase exhibited several properties of significant industrial importance, such as pH and temperature stability, wide organic solvent tolerance and broad hydrolysis on vegetable oils. Such a combination of properties makes it a promising candidate for its application in non-aqueous biocatalysis, such as biodiesel production, selective hydrolysis or esterification for enrichment of PUFAs and oil-contaminated biodegradation, which have been drawn considerable attention currently.     

Lipase production of Aspergillus oryzae

Aspergillus oryzae produced a small amount of lipase (0.05–0.8 U/wet-g of solid medium) in solid cultures, in contrast to the larger amount (0.46 U/ml) in a shake-flask culture in a modified GYP medium containing 2% glucose, 1% yeast extract and 2% Polypepton. Optimum conditions of lipase production in the submerged culture of A. oryzae were determined in terms of pH, composition of medium, and temperature. In a shake-flask culture at 28°C, the maximum amount of lipase increased to 0.78 U/ml upon the addition of 3% soybean oil to the modified GYP medium. In a jar fermentor culture, 30 U/ml lipase activity was obtained after 72 h at 28°C under appropriate conditions. Lipase production was greatly influenced by the culture temperature, and the optimum temperature for lipase production was about 24°C with a narrow temperature range, which was 10 degrees lower than that for the growth. In the submerged cultures, two kinds of lipase at least exhibiting different substrate specificities were also suggested.     

Strategies for the production of lipase by Candida rugosa; neural estimation of biomass and lipase activity

Summary Various strategies for the production of lipase by Candida rugosa Diddens and Lodder (ATCC 14830) in stirred tank reactors were investigated. The strain was first screened for lipase production with agar plate assay based on the fluorescent dye Rhodamine B, followed by adaptation to the production medium used. The highest lipase activity of 7.6 U/ml was obtained on a medium containing 40 g olive oil/l and 1 g glucose/l, with supplying pure oxygen. Neural networks were used in the estimation of biomass and lipase activity.     

Isolation and selection of cellulolytic fungi from palm oil mill effluent

Cellulolytic fungi, 34 strains, were isolated from samples taken from palm oil mill residues and effluent, and high cellulase producers selected in comparison with nine known reference strains. Although 13 isolates showed good filter paper distintegration within 14 days, only eight isolates exhibited clearing zones around their colonies on carboxymethylcellulose (CMC) agar medium. Quantitative cellulase activity measurements, using CMC as carbon source, selected three of the eight isolates as potential cellulase producers. Using dried palm oil mill condensate as carbon source, only one of the isolates (F 11) showed similar results on both carbon sources. During media optimization for CMCase production, a four-fold increase from 0.058 to 0.275 U/ml was obtained using a medium, containing 0.1% (v/v) Tween 80 0.02% (w/v) NH₄NO₃, 0.025% (w/v) proteose-peptone and 0.1% (w/v) CMC dissolved in undiluted condensate from the sterilization of oil palm bunches, with an initial pH of 5.5.     

Superinducers for induction of thermostable lipase production by Pseudomonas species NT-163 and other Pseudomonas-like bacteria

Summary Among various additives that affected production of a new thermostable extracellular lipase from Pseudomonas sp. NT-163 , stearyl alcohol was the most effective. Addition of stearyl alcohol (0.5%) brought about ca. 500 fold enhancement of the lipase activity (200 U/ml by p-nitorophenyllaurate method) compared to the case with no additive ( 0.4 U/ml), while olive oil attained only 12–15 U/ml. Palmityl and oleyl alcohols also were highly effective as lipase inducers (150–160 U/ml could be attained). Furthermore, stearyl alcohol induced lipase formation in several other Bacteriol strains 10-times more than olive oil.     

Isolation and screening of Streptomyces sp. Al-Dhabi-49 from the environment of Saudi Arabia with concomitant production of lipase and protease in submerged fermentation

In this study, Streptomyces sp. Al-Dhabi-49 was isolated from the soil sample of Saudi Arabian environment for the simultaneous production of lipase and protease in submerged fermentation. The process parameters were optimized to enhance enzymes production. The production of protease and lipase was found to be maximum after 5 days of incubation (139.2 ± 2.1 U/ml, 253 ± 4.4 U/ml). Proteolytic enzyme increases with the increase in pH up to 9.0 (147.2 ± 3.6 U/ml) and enzyme production depleted significantly at higher pH values. In the case of lipase, production was maximum in the culture medium containing pH 8.0 (166 ± 1.3 U/ml). The maximum production of protease was observed at 40 °C (174 ± 12.1 U/ml) by Streptomyces sp. Lipase activity was found to be optimum at the range of temperatures (30–50 °C) and maximum production was achieved at 35 °C (168 ± 7.8 U/ml). Among the evaluated carbon sources, maltose significantly influenced on protease production (218 ± 12.8 U/ml). Lipase production was maximum when Streptomyces sp. was cultured in the presence of glucose (162 ± 10.8U/ml). Among various concentrations of peptone, 1.0% (w/v) significantly enhanced protease production. The lipase production was very high in the culture medium containing malt extract as nitrogen source (86 ± 10.2 U/ml). Protease production was maximum in the presence of Ca²⁺ as ionic source (212 ± 3.8 U/ml) and lipase production was enhanced by the addition of Mg²⁺ with the fermentation medium (163.7 ± 6.2 U/ml).     

Enhancement of thermostable lipase production by a genotypically identified extremophilic Bacillus subtilis NS 8 in a continuous bioreactor

Bacillus strain NS 8, a lipase-producing bacterium isolated from a Malaysian hot spring, is able to tolerate a broad range of temperature and pH, which makes it beneficial for this study. It generated PCR products with molecular weight of 1,532 bp, and the 16S rRNA sequence analysis identified it as Bacillus subtilis with accession number AB110598. It showed a 71% similarity index with B. subtilis using Biolog Microstation System. Its lipase production was optimized using a shake flask system by changing the physical (agitation speed, pH and temperature) and nutritional (nitrogen, carbon and minerals) factors. The most suitable combination of the basal medium for lipase production was 2.5% olive oil (carbon), 1.5% peptone (nitrogen), 0.1% MgSO(4) (mineral) at an optimum temperature of 50°C, pH 7.5 and 150 rpm agitation, giving an enzyme yield of 4.23 U/ml. Statistical optimization using response surface methodology was carried out. An optimum lipase production of 5.67 U/ml was achieved when olive oil concentration of 3%, peptone 2%, MgSO(4)·7H(2)O 0.2% and an agitation rate of 200 rpm were combined. Lipase production was further carried out inside a 2-liter bioreactor, which yielded an enzyme activity of 14.5 U/ml after 15 h of incubation.