The antisense sequence of the HIV-1 TAR stem-loop structure covalently linked to the hairpin ribozyme enhances its catalytic activity against two artificial substrates

This work is an in vitro study of the efficiency of catalytic antisense RNAs whose catalytic domain is the wild-type sequence of the hairpin ribozyme, derived from the minus strand of the tobacco ringspot virus satellite RNA. The sequence in the target RNA recognized by the antisense molecule was the stem-loop structure of the human immunodeficiency virus-1 (HIV-1) TAR region. This region was able to form a complex with its antisense RNA with a binding rate of 2 x 10(4) M(-1)s(-1). Any deletion of the antisense RNA comprising nucleotides of the stem-loop resulted in a decrease in binding rate. Sequences 3' of the stem in the sense RNA also contributed to binding. This stem-loop TAR-antisense segment, covalently linked to a hairpin ribozyme, enhanced its catalytic activity. The highest cleavage rate was obtained when the stem-loop structure was present in both ribozyme and substrate RNAs and they were complementary. Similarly, an extension at the 5'-end of the hairpin ribozyme increased the cleavage rate when its complementary sequence was present in the substrate. Inclusion of the stem-loop at the 3'-end and the extension at the 5'-end of the hairpin ribozyme abolished the positive effect of both antisense units independently. These results may help in the design of hairpin ribozymes for gene silencing.     

Oligonucleotide facilitators may inhibit or activate a hammerhead ribozyme.

Facilitators are oligonucleotides capable of affecting hammerhead ribozyme activity by interacting with the substrate at the termini of the ribozyme. Facilitator effects were determined in vitro using a system consisting of a ribozyme with 7 nucleotides in every stem sequence and two substrates with inverted facilitator binding sequences. The effects of 9mer and 12mer RNA as well as DNA facilitators which bind either adjacent to the 3'- or 5'-end of the ribozyme were investigated. A kinetic model was developed which allows determination of the apparent dissociation constant of the ribozyme-substrate complex from single turnover reactions. We observed a decreased dissociation constant of the ribozyme-substrate complex due to facilitator addition corresponding to an additional stabilization energy of delta delta G=-1.7 kcal/mol with 3'-end facilitators. The cleavage rate constant was increased by 3'-end facilitators and decreased by 5'-end facilitators. Values for Km were slightly lowered by all facilitators and kcat was increased by 3'-end facilitators and decreased by 5'-end facilitators in our system. Generally the facilitator effects increased with the length of the facilitators and RNA provided greater effects than DNA of the same sequence. Results suggest facilitator influences on several steps of the hammerhead reaction, substrate association, cleavage and dissociation of products. Moreover, these effects are dependent in different manners on ribozyme and substrate concentration. This leads to the conclusion that there is a concentration dependence whether activation or inhibition is caused by facilitators. Conclusions are drawn with regard to the design of hammerhead ribozyme facilitator systems.     

Tailoring the switch from IRES-dependent to 5′-end-dependent translation with the RNase P ribozyme

Translation initiation driven by internal ribosome entry site (IRES) elements is dependent on the structural organization of the IRES region. We have previously shown that a structural motif within the foot-and-mouth-disease virus IRES is recognized in vitro as substrate for the Synechocystis sp. RNase P ribozyme. Here we show that this structure-dependent endonuclease recognizes the IRES element in cultured cells, leading to inhibition of translation. Inhibition of IRES activity was dependent on the expression of the active ribozyme RNA subunit. Moreover, expression of the antisense sequence of the ribozyme did not inhibit IRES activity, demonstrating that stable RNA structures located upstream of the IRES element do not interfere with internal initiation. RNAs carrying defective IRES mutants that were substrates of the ribozyme in vivo revealed an increased translation of the reporter in response to the expression of the active ribozyme. In support of RNA cleavage, subsequent analysis of the translation initiation manner indicated a switch from IRES-dependent to 5′-end-dependent translation of RNase P target RNAs. We conclude that the IRES element is inactivated by expression in cis of RNase P in the cytoplasm of cultured cells, providing a promising antiviral tool to combat picornavirus infections. Furthermore, our results reinforce the essential role of the structural motif that serves as RNase P recognition motif for IRES activity.     

The kinetic mechanism of the hairpin ribozyme in vivo: influence of RNA helix stability on intracellular cleavage kinetics

The relationship between hairpin ribozyme structure, and cleavage and ligation kinetics, and equilibria has been characterized extensively under a variety of reaction conditions in vitro. We developed a quantitative assay of hairpin ribozyme cleavage activity in yeast to learn how structure-function relationships defined for RNA enzymes in vitro relate to RNA-mediated reactions in cells. Here, we report the effects of variation in the stability of an essential secondary structure element, H1, on intracellular cleavage kinetics. H1 is the base-paired helix formed between ribozyme and 3' cleavage product RNAs. H1 sequences with fewer than three base-pairs fail to support full activity in vitro or in vivo, arguing against any significant difference in the stability of short RNA helices under in vitro and intracellular conditions. Under standard conditions in vitro that include 10 mM MgCl(2), the internal equilibrium between cleavage and ligation of ribozyme-bound products favors ligation. Consequently, ribozymes with stable H1 sequences display sharply reduced self-cleavage rates, because cleavage is reversed by rapid re-ligation of bound products. In contrast, ribozymes with as many as 26 base-pairs in H1 continue to self-cleave at maximum rates in vivo. The failure of large products to inhibit cleavage could be explained if intracellular conditions promote rapid product dissociation or shift the internal equilibrium to favor cleavage. Model experiments in vitro suggest that the internal equilibrium between cleavage and ligation of bound products is likely to favor cleavage under intracellular ionic conditions.     

In vivo expression of the nucleolar group I intron-encoded I-dirI homing endonuclease involves the removal of a spliceosomal intron

The Didymium iridis DiSSU1 intron is located in the nuclear SSU rDNA and has an unusual twin-ribozyme organization. One of the ribozymes (DiGIR2) catalyses intron excision and exon ligation. The other ribozyme (DiGIR1), which along with the endonuclease-encoding I-DirI open reading frame (ORF) is inserted in DiGIR2, carries out hydrolysis at internal processing sites (IPS1 and IPS2) located at its 3' end. Examination of the in vivo expression of DiSSU1 shows that after excision, DiSSU1 is matured further into the I-DirI mRNA by internal DiGIR1-catalysed cleavage upstream of the ORF 5' end, as well as truncation and polyadenylation downstream of the ORF 3' end. A spliceosomal intron, the first to be reported within a group I intron and the rDNA, is removed before the I-DirI mRNA associates with the polysomes. Taken together, our results imply that DiSSU1 uses a unique combination of intron-supplied ribozyme activity and adaptation to the general RNA polymerase II pathway of mRNA expression to allow a protein to be produced from the RNA polymerase I-transcribed rDNA.     

Structure of the ribozyme substrate hairpin of Neurospora VS RNA: a close look at the cleavage site

The cleavage site of the Neurospora VS RNA ribozyme is located in a separate hairpin domain containing a hexanucleotide internal loop with an A-C mismatch and two adjacent G-A mismatches. The solution structure of the internal loop and helix la of the ribozyme substrate hairpin has been determined by nuclear magnetic resonance (NMR) spectroscopy. The 2 nt in the internal loop, flanking the cleavage site, a guanine and adenine, are involved in two sheared G.A base pairs similar to the magnesium ion-binding site of the hammerhead ribozyme. Adjacent to the tandem G.A base pairs, the adenine and cytidine, which are important for cleavage, form a noncanonical wobble A+-C base pair. The dynamic properties of the internal loop and details of the high-resolution structure support the view that the hairpin structure represents a ground state, which has to undergo a conformational change prior to cleavage. Results of chemical modification and mutagenesis data of the Neurospora VS RNA ribozyme can be explained in context with the present three-dimensional structure.     

Requirements for polyadenylation at the 3' end of LINE-1 elements

LINE-1 (L1) is the only active, autonomous, non-LTR, human retroelement. There are about 5 × 10⁵ L1 copies in the human genome, the majority of which are truncated at their 5′ ends. Both truncated and full-length L1 insertions contain a polyadenylation (polyA) signal at their 3′ ends. A typical polyA site consists of the three main cis-acting elements: a conserved hexamer, cleavage site, and a GU-rich downstream region. A newly inserted L1 copy contains the conserved AATAAA hexamer at the end of its sequence. However, the GU-rich downstream region has to be provided by the neighboring genomic sequences and therefore it would vary for every L1 copy. Using northern blot analysis of transiently transfected L1 expression vectors we demonstrate that L1 element contain sequence that allow efficient polyadenylation at the L1 3′ end upon retrotransposition into a new genomic location independent of the base composition downstream of the insertion site. The strategy of polyadenylation at the 3′ end of L1 parallels the approach the element employs at its 5′UTR by having an unusual internal polymerase II promoter, making new insertions less dependent on the properties of the flanking sequences at the new locus.     

Requirement of helix P2.2 and nucleotide G1 for positioning the cleavage site and cofactor of the glmS ribozyme

The glmS ribozyme is a catalytic RNA that self-cleaves at its 5'-end in the presence of glucosamine 6-phosphate (GlcN6P). We present structures of the glmS ribozyme from Thermoanaerobacter tengcongensis that are bound with the cofactor GlcN6P or the inhibitor glucose 6-phosphate (Glc6P) at 1.7 A and 2.2 A resolution, respectively. The two structures are indistinguishable in the conformations of the small molecules and of the RNA. GlcN6P binding becomes apparent crystallographically when the pH is raised to 8.5, where the ribozyme conformation is identical with that observed previously at pH 5.5. A key structural feature of this ribozyme is a short duplex (P2.2) that is formed between sequences just 3' of the cleavage site and within the core domain, and which introduces a pseudoknot into the active site. Mutagenesis indicates that P2.2 is required for activity in cis-acting and trans-acting forms of the ribozyme. P2.2 formation in a trans-acting ribozyme was exploited to demonstrate that N1 of the guanine at position 1 contributes to GlcN6P binding by interacting with the phosphate of the cofactor. At neutral pH, RNAs with adenine, 2-aminopurine, dimethyladenine or purine substitutions at position 1 cleave faster with glucosamine than with GlcN6P. This altered cofactor preference provides biochemical support for the orientation of the cofactor within the active site. Our results establish two features of the glmS ribozyme that are important for its activity: a sequence within the core domain that selects and positions the cleavage-site sequence, and a nucleobase at position 1 that helps position GlcN6P.     

Characterization of the Escherichia coli 23S Ribosomal RNA region associated with ribosomal protein L1. Evidence for homologies with the 5''-end region of the L11 operon.

The results previously obtained upon studying the L1-23S RNA complex by the fingerprint technique have been reexamined in the light of new data on 23S RNA primary structure. The 23S RNA region that remains associated with the L1 ribosomal protein after RNase digestion of the synthetic complex lies between nucleotides 2067 and 2235 from the 5'-end of the molecule. This region contains a m7G near to the 5'-end and possesses a high degree of mutability in E. coli. Three different sequences were observed in E. coli MRE 600. All three sequences differ in two positions relative to the corresponding sequence in rrnB cistron from E. coli K12. Striking homology is observed between the 23S RNA region associated with protein L1 and the 5'-part of L11 operon. This observation supports the model of feedback regulation of r-proteins synthesis proposed by Yates et al. (PNAS, 77, 1837) and strongly suggests that the region of 23S RNA located between positions 2155 and 2202 is essential for the binding of protein L1.     

The efficiency of a cis-cleaving ribozyme in an mRNA coding region is influenced by the translating ribosome in vivo.

A cis -cleaving hammerhead ribozyme (Rz) expression system (3A'-Rz) in Escherichia coli has been constructed that can be used to study the involvement of factors that affect ribozyme cleavage in vivo . The ribozyme sequence is placed in the coding region of 3A' mRNA, which is expressed from a semi-synthetic translation assay gene. The size and the 5'-end sequences of the 3' cleavage fragments were determined and the efficiencies of different Rz variants were measured by quantitative primer extension. It is shown that one of the semi-active constructs (3A'-RzIII) can be used as an indicator for ribosomes that read through or terminate at a stop codon upstream of the Rz hammerhead sequence in the mRNA. Readthrough of the stop codon in an uncleaved mRNA gives a full length 3A' protein. Termination at the stop codon upstream of the ribozyme sequence gives a shortened termination product. However, the mRNA fragment that should arise as a result of the auto-cleavage does not give rise to any detectable corresponding truncated protein. Besides studies on translating ribosomes, the 3A'-Rz system can be used to isolate mutant strains that are changed in ribozyme activity either from internal base alterations, or changed interacting host factors.     

锤头状核酶对转化生长因子β1 RNA的体外剪切作用

为研究转化生长因子β1（TGFβ1）在造血调控中的关键作用, 构建针对抗转化生长因子β1的锤头状核酶, 并对它的体外剪切活性进行探讨. TGFβ1 cDNA部分基因片段其克隆入T载体中, ３２Ｐ标记TGFβ1体外转录物, 变性的聚丙烯酰胺凝胶电泳纯化获得靶RNA.计算机设计抗TGFβ1的锤头状核酶, 并把合成的核酶基因片段克隆入pGEM-9Zf(-)中T7启动子的下游, 凝胶电泳纯化回收３２Ｐ标记核酶的体外转录物.在不同条件下进行核酶的剪切反应, 变性PAGE, 放射自显影.活性的Rz445在37℃时具有良好活性, Km为29.55 nmol/L, Kcat为0.1533 min－1, 突变型核酶Rz445m没有剪切活性.制备的Rz445在体外具有良好的特异催化剪切活性, 并有望胞内抑制TGFβ1表达, 从而在干细胞移植中应用.