Quantitative Detection of Escherichia coli O157 in Surface Waters by Using Immunomagnetic Electrochemiluminescence

A protocol for the quantitative detection of Escherichia coli O157 in raw and concentrated surface waters using immunomagnetic electrochemiluminescence (IM-ECL) was developed and optimized. Three antibody sandwich formats were tested: commercial anti-O157:H7 IM beads, IM beads made in-house with a polyclonal anti-O157:H7 immunoglobulin G (IgG), or IM beads made in-house with a monoclonal anti-O157:H7 IgG coupled with a polyclonal anti-O157:H7 IgG to which an electrochemiluminescent label (TAG) was attached. The monoclonal IM bead-polyclonal TAG format was chosen for optimization because it gave lower background levels and linear regression slopes of ca. 1.0, indicative of a constant ECL signal per cell. The dynamic range was ca. 10¹ to 10⁵ cells ml⁻¹ in phosphate-buffered saline and in raw water samples. The monoclonal IM beads selectively captured E. coli O157 cells in the presence of ca. 10⁸ cells of a non-O157 strain of E. coli ml⁻¹. Background ECL signals from concentrated (100-fold) water samples were substantially higher and more variable than raw water samples. The background signal was partially eliminated by the addition of polyvinylpolypyrrolidone. Successive cell capture incubations, termed sequential bead capture (SBC), were optimized for establishing baseline ECL values for individual water samples. The linear dynamic range with SBC was ca. 10² to 10⁵ E. coli O157 cells ml of concentrated water⁻¹. To validate the protocol, 10-liter surface water samples were spiked with ca. 5,000 E. coli O157 (Odwalla) cells and concentrated by vortex filtration, and 1- or 3-ml aliquots were analyzed by IM-ECL. Differential ECL signals (SBC) from 1- and 3-ml samples were statistically significant and were generally consistent with standard curves for these cell concentrations. Enrichments were conducted with aliquots of spiked raw water and concentrated water using EC broth and minimal lactose broth (MLB). All tubes with concentrated water became turbid and gave a positive ECL response for E. coli O157 (>10,000 ECL units); MLB gave a somewhat higher detection rate with spiked raw water. The potential sensitivity of the IM-ECL assay is ca. 25 E. coli O157 cells ml of raw water⁻¹, 25 cells 100 ml of 100-fold concentrated water⁻¹, or 1 to 2 viable cells liter⁻¹ with concentration and enrichment. The IM-ECL assay appears suitable for routine analysis and screening of water samples.     

Osteogenic Differentiation of Human Mesenchymal Stem Cells in Mineralized Alginate Matrices

Mineralized biomaterials are promising for use in bone tissue engineering. Culturing osteogenic cells in such materials will potentially generate biological bone grafts that may even further augment bone healing. Here, we studied osteogenic differentiation of human mesenchymal stem cells (MSC) in an alginate hydrogel system where the cells were co-immobilized with alkaline phosphatase (ALP) for gradual mineralization of the microenvironment. MSC were embedded in unmodified alginate beads and alginate beads mineralized with ALP to generate a polymer/hydroxyapatite scaffold mimicking the composition of bone. The initial scaffold mineralization induced further mineralization of the beads with nanosized particles, and scanning electron micrographs demonstrated presence of collagen in the mineralized and unmineralized alginate beads cultured in osteogenic medium. Cells in both types of beads sustained high viability and metabolic activity for the duration of the study (21 days) as evaluated by live/dead staining and alamar blue assay. MSC in beads induced to differentiate in osteogenic direction expressed higher mRNA levels of osteoblast-specific genes (RUNX2, COL1AI, SP7, BGLAP) than MSC in traditional cell cultures. Furthermore, cells differentiated in beads expressed both sclerostin (SOST) and dental matrix protein-1 (DMP1), markers for late osteoblasts/osteocytes. In conclusion, Both ALP-modified and unmodified alginate beads provide an environment that enhance osteogenic differentiation compared with traditional 2D culture. Also, the ALP-modified alginate beads showed profound mineralization and thus have the potential to serve as a bone substitute in tissue engineering.     

Cathepsin B Is Up-Regulated and Mediates Extracellular Matrix Degradation in Trabecular Meshwork Cells Following Phagocytic Challenge

Cells in the trabecular meshwork (TM), a tissue responsible for draining aqueous humor out of the eye, are known to be highly phagocytic. Phagocytic activity in TM cells is thought to play an important role in outflow pathway physiology. However, the molecular mechanisms triggered by phagocytosis in TM cells are unknown. Here we investigated the effects of chronic phagocytic stress on lysosomal function using different phagocytic ligands (E. coli, carboxylated beads, collagen I-coated beads, and pigment). Lysotracker red co-localization and electron micrographs showed the maturation of E. coli- and collagen I-coated beads-containing phagosomes into phagolysosomes. Maturation of phagosomes into phagolysosomes was not observed with carboxylated beads or pigment particles. In addition, phagocytosis of E. coli and collagen I-coated beads led to increased lysosomal mass, and the specific up-regulation and activity of cathepsin B (CTSB). Higher levels of membrane-bound and secreted CTSB were also detected. Moreover, in vivo zymography showed the intralysosomal degradation of ECM components associated with active CTSB, as well as an overall increased gelatinolytic activity in phagocytically challenged TM cells. This increased gelatinolytic activity with phagocytosis was partially blocked with an intracellular CTSB inhibitor. Altogether, these results suggest a potential role of phagocytosis in outflow pathway tissue homeostasis through the up-regulation and/or proteolytic activation of extracellular matrix remodeling genes.     

Elucidation of optimum conditions for immobilization of viable cells by using calcium alginate

Different factors which affect the stability of calcium alginate gel beads entrapping viable cells during fermentation were investigated. It was found that among others, the initial population of cells per ml of gel beads, the length of period of incubation in CaCl₂ solution, and the concentration of sodium alginate used for the immobilization were the most important factors affecting the stability of the gel beads during fermentation. By using an initial cell population of about 10⁵ cells per ml of 2.0% sodium alginate, and incubating the beads for at least 22 h in a CaCl₂ solution after immobilization, the percentage of beads which developed cracks during fermentation was highly reduced. Also, without the addition of CaCl₂ into the fermenting broth, the gel beads were stable for nine consecutive batch fermentations.     

Encapsulating Non-Human Primate Multipotent Stromal Cells in Alginate via High Voltage for Cell-Based Therapies and Cryopreservation

Alginate cell-based therapy requires further development focused on clinical application. To assess engraftment, risk of mutations and therapeutic benefit studies should be performed in an appropriate non-human primate model, such as the common marmoset (Callithrix jacchus). In this work we encapsulated amnion derived multipotent stromal cells (MSCs) from Callithrix jacchus in defined size alginate beads using a high voltage technique. Our results indicate that i) alginate-cell mixing procedure and cell concentration do not affect the diameter of alginate beads, ii) encapsulation of high cell numbers (up to 10×10⁶ cells/ml) can be performed in alginate beads utilizing high voltage and iii) high voltage (15–30 kV) does not alter the viability, proliferation and differentiation capacity of MSCs post-encapsulation compared with alginate encapsulated cells produced by the traditional air-flow method. The consistent results were obtained over the period of 7 days of encapsulated MSCs culture and after cryopreservation utilizing a slow cooling procedure (1 K/min). The results of this work show that high voltage encapsulation can further be maximized to develop cell-based therapies with alginate beads in a non-human primate model towards human application.     

Production of gallic acid by immobilization of Rhizopus oryzae

Production of gallic acid using the immobilized cells of Rhizopus oryzae has been studied. It was observed that 2% tannic acid concentration, 200 numbers of calcium alginate beads of spore concentration 2?×?10⁵/ml and initial pH 5.0 gave the maximum gallic acid production. The % of tannin conversion was 78.5% whereas in free cell culture, the % conversion was 83.5% in 4 days of incubation period. The beads were used for 3 times successfully. A drastic fall in the hydrolysis process was observed when the beads were treated with glutaraldehyde.     

Enhancing isomaltulose production by recombinant Escherichia coli producing sucrose isomerase: culture medium optimization containing agricultural wastes and cell immobilization

Isomaltulose is a structural isomer of sucrose commercially used in food industries. In this work, recombinant Escherichia coli producing sucrose isomerase (SIase) was used to convert sucrose into isomaltulose. To develop an economical industrial medium, untreated cane molasses (10.63 g l^?1), yeast extract (25.93 g l^?1), and corn steep liquor (10.45 g l^?1) were used as main culture compositions for SIase production. The relatively high SIase activity (14.50 ± 0.11 U mg DCW^?1) was obtained by the recombinant cells. To the best of our knowledge, this is the first investigation on SIase production by engineered E. coli using untreated cane molasses. The recombinant E. coli cells expressing the SIase gene were immobilized in calcium alginate gel in order to improve the efficiency of recycling. The immobilization was most effective with 2 % (w/v) sodium alginate and 3 % (w/v) calcium chloride. The optimal initial biomass for immobilization was 20 % (w/v, wet wt.), with a hardening time of 8 h for cell immobilization. The immobilized E. coli cells exhibited good stability for 30 batches with the productivity of 0.45 g isomaltulose g pellet^?1 h^?1. A continuous isomaltulose formation process using a column reactor remained stable for 40 days with 83 ± 2 % isomaltulose yield, which would be beneficial for economical production of isomaltulose.     

Antimicrobial properties of ternary eutectic aluminum alloys

Several Escherichia coli deletion mutants of the Keio collection were selected for analysis to better understand which genes may play a key role in copper or silver homeostasis. Each of the selected E. coli mutants had a deletion of a single gene predicted to encode proteins for homologous recombination or contained functions directly linked to copper or silver transport or transformation. The survival of these strains on pure copper surfaces, stainless steel, and alloys of aluminum, copper and/or silver was investigated. When exposed to pure copper surfaces, E. coli ΔcueO was the most sensitive, whereas E. coli ΔcopA was the most resistant amongst the different strains tested. However, we observed a different trend in sensitivities in E. coli strains upon exposure to alloys of the system Al–Ag–Cu. While minor antimicrobial effects were detected after exposure of E. coli ΔcopA and E. coli ΔrecA to Al–Ag alloys, no effect was detected after exposure to Al–Cu alloys. The release of copper ions and cell-associated copper ion concentrations were determined for E. coli ΔcopA and the wild-type E. coli after exposure to pure copper surfaces. Altogether, compared to binary alloys, ternary eutectic alloys (Al–Ag–Cu) had the highest antimicrobial effect and thus, warrant further investigation.     

Removal of Carbapenem-Resistant Enterobacteriaceae (CRE) from Blood by Heparin-Functional Hemoperfusion Media

Bloodstream infections due to Carbapenem-Resistant Enterobacteriaceae (CRE) are becoming more frequent and are associated with a high mortality. At present, combination antimicrobial therapy yields the best outcomes, but treatment options are limited. Many bacteria utilize heparan sulfate to bind to human cells. We studied the ability of a biomimetic device composed of polyethylene beads with endpoint-attached heparin to bind both sensitive and (CRE) E. coli and Klebsiella pneumoniae from spiked blood samples. Greater than 90% of susceptible, E. coli, CRE E. coli and CRE Klebsiella were removed by the beads. Future studies in human bacteremia with this technology are planned.     

Antimicrobial and antioxidative potential of free and immobilised cellobiose dehydrogenase isolated from wood degrading fungi

Cellobiose dehydrogenase (CDH, EC 1.1.99.18) is a glycoprotein having many biotechnological applications. In the present study, CDHs isolated from Phlebia lindtneri (PlCDH), Phanerochaete chrysosporium (PchCDH), Cerrena unicolor (CuCDH), and Pycnoporus sanguineus (PsCDH) were studied the first time for their ability to generate antioxidant and antimicrobial agents. The aim of the research was to evaluate the antioxidant and antimicrobial activity of systems composed of four CDHs and lactose or cellobiose as a reaction substrate. The free radical scavenging effect of free and immobilised enzymes was evaluated using the DPPH method. The lowest values of EC₅₀ (10.04 ± 0.75 $\text{μg}$/ml) was noted for PlCDH/lactose and for PlCDH/cellobiose (12.06 ± 1.35 $\text{μg}$/ml). The EC₅₀value reached 12.6 ± 1.51 $\text{μg}$/ml in the case of PsCDH/lactose and 15.96 ± 1.35 for PsCDH. The CDH preparations were also effectively immobilised in alginate (the immobilisation efficiency expressed as a protein yield ranged from 61.6 to 100 %). The operational stability expressed as a scavenging effect showed the possibility of using the alginate beads 4 times. Both the free and immobilised CDHs as well as the CDH/substrate were tested against Gram-negative Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Gram-positive Staphylococcus aureus ATCC 25923 bacteria. All samples, except PlCDH, were potentially effective in suppression of bacterial growth. The highest percentage of inhibition (100 %) was obtained for S. aureus bacteria using PsCDH and PchCDH with lactose as a substrate, whereas a slightly lesser effect was observed for E. coli and P. aeruginosa bacterial cells, i.e. 64.1 % and 86.5 % (PsCDH) and 94.1 % and 41.4 % (PchCDH), respectively. Furthermore, the concentrations of the reaction products (aldonic acids and hydrogen peroxide) were quantified and the surface morphology of the alginate beads was analysed using SEM visualisation.     

Detoxification of hexavalent chromate by Amphibacillus sp. KSUCr3 cells immobilised in silica-coated magnetic alginate beads

Recently isolated Cr(VI)-reducing Amphibacillus KSUCr3 whole cells were immobilised in magnetic gels. Magnetic magnetite (Fe₃O₄) nanoparticles were synthesised with an average particle size of 47 nm and 80 electromagnetic unit (emu)/g saturation magnetisation. Whole cells were immobilised by entrapment in agar, agarose, alginate, or gelatin in the presence or absence of Fe₃O₄ nanoparticles for the preparation of both magnetic and nonmagnetic immobilised cells. Of the gels tested, alginate was selected as the best immobilisation matrix, and following optimisation of the entrapment process, the immobilisation yield reached 92.5%. In addition to the ease of separation and reuse of the magnetic cell-containing alginate beads using an external magnet, the magnetically immobilised cells showed approximately 16% higher Cr(VI) reduction activity compared with nonmagnetic immobilised cells. To improve their physical and mechanical properties, the magnetic alginate beads were successfully coated with a dense silica layer using sol-gel chemistry and Ca(OH)₂, an alkaline catalyst for tetraethyl orthosilicate, to avoid leaching of Ca²⁺ ions. Amphibacillus KSUCr3 cells immobilised in silica-coated magnetic alginate beads showed approximately 1.4- to 3.9-fold enhancement of thermal stability compared with free cells. Furthermore, after seven batch cycles, the Cr(VI) reduction activity of free cells decreased to 48%, whereas immobilised cells still retained 81.1% of their original activity. In addition, the Cr(VI)-reduction rate of immobilised cells was higher relative to free cells, especially at higher Cr(VI) concentrations. These results supported the development of a novel, efficient biocatalysts for Cr(VI) detoxification using a combination of whole cell immobilisation, sol-gel chemistry, and nanotechnology.     

Operation of packed-bed immobilized cell reactor featuring active β-galactosidase inclusion body-containing recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> cells

In this study, we developed a packed-bed immobilized cell reactor containing active β-gal (β-galactosidase) inclusion body (IB)-containing Escherichia coli (E. coli) cells in alginate beads. This packed-bed reactor was operated using a substrate feed solution 0.72 ∼ 38.4 mM ONPG (o-nitrophenyl-β-D-galactoside) prepared in Z buffer supplemented with chloroform and 0.1% SDS (sodium dodecyl sulfate). The production rate of ONP (o-nitrophenol) in the reactor containing cells that were incubated with α-MG (α-methyl D-glucospyranoside) or D-fucose after induction was superior to those prepared with cells that were not incubated with α-MG or D-fucose. The ONP production rate was increased proportionally with ONPG concentration in the substrate feed up to a concentration of 38.4 mM. However, as the ONPG concentration was increased in the substrate feed solution, galactose inhibition inside the alginate beads was increased. This most likely occurred due to problems with diffusion. In addition, partial breakage of alginate beads was observed during the later periods of operation. In this study, we demonstrated that active β-gal IB-containing E. coli cells were sustained in the immobilized cell reactor during operation. Particularly, these findings demonstrate the feasibility of using active IBs in an enzymatic reaction without the need for any purification step. In addition, we showed that these IB-containing cells could be directly used in an immobilized reactor.     

Optimisation of the cell release from immobilised cells of Bacillus simplex cultivated in culture media enriched with Cd2+: influence of Cd2+, inoculum size, culture medium and alginate beads characteristics

Calcium alginate beads were used to entrap a Bacillus sp. that has the ability to biosorb cadmium. During the batch incubation of alginate beads in a `rich' or a `poor' liquid medium, cell release out of the beads was noticed with a lag phase which was inversely proportional to the inoculum size (2×10⁷ or 2×10⁸ cells ml^–1 alginate), to the medium content, and proportional to the alginate concentration (10 or 15 g l^–1) and to the cadmium concentration (1, 5 or 10 mg l^–1). In addition, the cell release occurred more quickly when the medium was renewed. When the concentration was below 5 mg l^–1, the alginate matrix seemed to protect the bacteria against Cd²⁺ toxicity.     

Growth of poliovirus using alginate entrapped-anchorage dependant Vero cells

Obligatory anchorage dependant Vero cells were successfully grown in gelatinous-like macrocarriers made of calcium alginate. Entrapped single cells were immobilized within the polymerized alginate matrix divide to form large spherical clumps of cells. A cell density of 17×10⁶ cells/ml of alginate with over 95% viability was obtained after 14 days in spinner flasks. When subjected to poliovirus type I infection, spherical masses of Vero cells progressively showed extensive cytopathic effect but remained entrapped in the alginate matrix of the macrocarriers. Virus was released into a cellular debris free-like supernatant and reached a peak titer of 10^8.0 TCID₅₀/ml after 72 hours.     

Metallic copper corrosion rates, moisture content, and growth medium influence survival of copper ion-resistant bacteria

The rapid killing of various bacteria in contact with metallic copper is thought to be influenced by the influx of copper ions into the cells, but the exact mechanism is not fully understood. This study showed that the kinetics of contact killing of copper surfaces depended greatly on the amount of moisture present, copper content of alloys, type of medium used, and type of bacteria. We examined antibiotic- and copper ion-resistant strains of Escherichia coli and Enterococcus faecium isolated from pig farms following the use of copper sulfate as feed supplement. The results showed rapid killing of both copper ion-resistant E. coli and E. faecium strains when samples in rich medium were spread in a thin, moist layer on copper alloys with 85% or greater copper content. E. coli strains were rapidly killed under dry conditions, while E. faecium strains were less affected. Electroplated copper surface corrosion rates were determined from electrochemical polarization tests using the Stern–Geary method and revealed decreased corrosion rates with benzotriazole and thermal oxide coating. Copper ion-resistant E. coli and E. faecium cells suspended in 0.8% NaCl showed prolonged survival rates on electroplated copper surfaces with benzotriazole coating and thermal oxide coating compared to surfaces without anti-corrosion treatment. Control of surface corrosion affected the level of copper ion influx into bacterial cells, which contributed directly to bacterial killing.     

Production of thermophilic α-amylase using immobilized transformed Escherichia coli by addition of glycine

Efficient production of thermophilic α-amylase from Bacillus stearothermophilus was investigated using recombinant Escherichia coli HB101/pH1301 immobilized with κ-carrageenan by the addition of glycine. The effects of glycine, the concentrations of κ-carrageenan and KCI on the production of the enzyme as well as the stability of plasmid pHI301 were studied. In the absence of glycine, the enzyme was localized in the periplasmic space of the recombinant E. coli cells and a small amount of the enzyme was liberated in the culture broth. Although the addition of glycine was very effective for release of α-amylase from the periplasm of E. coli entrapped in gel beads, a majority of the enzyme accumulated in the gel matrix. (In this paper, production of the enzyme from recombinant cells to an ambient is expressed by the term “release”, while diffusion-out from gel beads is referred to by the term “liberate”.) Concentrations of KCI and immobilizing support significantly affected on the liberation of α-amylase to the culture broth. Mutants which produced smaller amounts of the enzyme emerged during a successive culture of recombinant E. coli, even under selective pressure, and they predominated in the later period of the passages. The population of plasmid-lost segregants increased with cultivation time. The stability of pHI301 for the free cells was increased by the addition of 2% KCI, which is a hardening agent for carrageenan. Although the viability of cells and α-amylase activity in the beads decreased with cultivation time during the successive culture of the immobilized recombinant E. coli, the plasmid stability was increased successfully by immobilization. Efficient long-term production of α-amylase was attained by an iterative re-activation-liberation procedure using the immobilized recombinant cells. Although the viable cell number, plasmid stability and enzyme activity liberated in the glycine solution decreased at an early period in the cultivation cycles, the process attained steady state regardless of the addition of an antibiotic.     

Comparative assessment of the bactericidal effect of nanoparticles of copper oxide,silver, and chitosan-silver against Escherichia coli infection in broilers

Escherichia coli infection is considered one of the most economically important multi-systemic diseases in poultry farms. Several nanoparticles such as silver, chitosan, and copper oxide are known to be highly toxic to several microbes. However, there are no data concerning their success against in vivo experimental E. coli infection in broilers. Therefore, the present study was designed to investigate the bactericidal effect of low doses of CuO-NPs (5 mg/kg bwt), Ag-NPs (0.5 mg/kg bwt), and Ch-Ag NPs (0.5 mg/kg bwt) against E. coli experimental infection in broilers. One hundred chicks were divided into five groups as follows: (1) control; (2) E. coli (4 × 10⁸ CFU/ml) challenged; (3) E. coli +CuO-NPs; (4) E. coli +Ag-NPs; (5) E. coli +Ch-Ag NPs. The challenged untreated group, not NPs treated groups, recorded the lowest weight gain as well as the highest bacterial count and lesion score in all examined organs. The highest liver content of silver was observed in Ag-NPs treated group compared with the Ch-Ag NPs treated group. Our results concluded that Ch-Ag NPs not only had the best antibacterial effects but also acted as a growth promoter in broilers without leaving any residues in edible organs. We recommend using Ch-Ag NPs in broiler farms instead of antibiotics or probiotics.     

Development of a generic approach to native metalloproteomics: application to the quantitative identification of soluble copper proteins in Escherichia coli

A combination of techniques to separate and quantify the native proteins associated with a particular transition metal ion from a cellular system has been developed. The procedure involves four steps: (1) labeling of the target proteins with a suitable short-lived radioisotope (suitable isotopes are ⁶⁴Cu, ⁶⁷Cu, ¹⁸⁷W, ⁹⁹Mo, ⁶⁹Zn, ⁵⁶Mn, ⁶⁵Ni); (2) separation of intact soluble holoproteins using native isoelectric focusing combined with blue native polyacrylamide gel electrophoresis into native–native 2D gel electrophoresis; (3) spot visualization and quantification using autoradiography; and (4) protein identification with tandem mass spectrometry. The method was applied to the identification of copper proteins from a soluble protein extract of wild-type Escherichia coli K12 using the radioisotope ⁶⁴Cu. The E. coli protein CueO, which has previously been only identified as a multicopper oxidase following homologous overexpression, was now directly detected as a copper protein against a wild-type background at an expression level of 0.007% of total soluble protein. The retention of the radioisotope by the copper proteins throughout the separation process corroborates the method to be genuinely native. The procedure developed here can be applied to cells of any origin, and to any metal having suitable radioisotopes. The finding that the periplasmic protein CueO is the only major form of soluble protein bound copper in E. coli strengthens the view that the bacterial periplasm contains only a few periplasmic copper proteins, and that the cytosol is devoid of copper proteins. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The production of ethanol by Saccharomyces cerevisiae immobilized in polycation-stabilized calcium alginate gels

Summary Polycation treatment of preformed calcium alginate beads produced a matrix with higher resistance to phosphate ions. The treatment of immobilized Saccharomyces cerevisiae in the calcium alginate beads inhibited respiration of the entrapped cells but did not reduce ethanol production.