Opto-electronic DNA chip: high performance chip reading with an all-electric interface

Reading of DNA chips is usually based on fluorescence labeling of hybridised target molecules. Combined with the use of confocal fluorescence scanners, this approach shows very high performances in terms of accuracy and sensitivity. However, fluorescence readers remain costly and cumbersome. This prevents the use of DNA chips as a decentralised testing tool. Electrical monitoring of hybridisation is one way to reduce the cost and size of the reader. However, the multiplexing of electric detection-based systems in a miniaturised form remains challenging. Here, we present a system based on the use of a low cost CMOS photodetector array as a solid support for a DNA chip, coupled with revelation by enzyme-catalysed chemiluminescence. This system is shown to allow the detection of low pM target concentrations with a 3 logs dynamic range on dense DNA microarrays, with excellent inter-spot reproducibility. Combining electric interface and high analytical performances, this opto-electronic DNA chip is one attractive solution for nucleic acids detection and analysis in disposable, fully automatised, total analysis systems developed for decentralised testing.     

Evanescent resonator chips: a universal platform with superior sensitivity for fluorescence-based microarrays

In the present paper, we introduce for the first time a novel generation of a universal fluorescence transducer, the so-called evanescent resonator (ER) platform. The device comprises a transparent substrate and a thin dielectric surface layer containing sub-micron corrugated structures. The ER chip exhibits an inherent physical signal amplification due to confinement of excitation energy in the thin surface layer. Energy confinement is based on interference effects created by the abnormal reflection geometry and leads to efficient excitation of surface-bound fluorophores in the evanescent field of the chip. The evanescent resonator platform has the potential to increase the fluorescence yield of labelled biomolecules to more than 100-fold when compared with conventional microarray chips. The new ER device has been developed for analysis of nucleic acids from different species. However, it can be used with all kinds of biomolecular affinity systems. The platform combines superior sensitivity with exceptional reproducibility and ease of use. The chips are compatible with commercially available laser scanners, confocal microscopes, and portable or miniaturised CCD read-out equipment.     

DNA芯片制作原理及其杂交信号检测方法

文章讨论了DNA芯片的制作原理和杂交信号的检测方法。依其结构,DNA芯片可分为两种形式,DNA阵列和寡核苷酸微芯片。DNA芯片的制作方法主要有光导原位合成法和自动化点样法。DNA芯片与标记的探针或DNA样品杂交,并通过探测杂交信号谱型来实现DNA序列或基因表达的分析。适应于DNA芯片的发展,同时出现了许多新型的杂交信号检测方法。主要有激光荧光扫描显微镜、激光扫描共焦显微镜、结合使用CCD相机的荧光显微镜、光纤生物传感器、化学发生法、光激发磷光物质存储屏法、光散射法等。     

Cell to aperture interaction in patch-clamp chips visualized by fluorescence microscopy and focused-ion beam sections

Patch-clamp is an important method to monitor the electrophysiological activity of cells and the role of pharmacological compounds on specific ion channel proteins. In recent years, planar patch-clamp chips have been developed as a higher throughput approach to the established glass-pipette method. However, proper conditions to optimize the high resistance cell-to-probe seals required to measure the small currents resulting from ion channel activity are still the subject of conjecture. Here, we report on the design of multiple-aperture (sieve) chips to rapidly facilitate assessment of cell-to-aperture interactions in statistically significant numbers. We propose a method to pre-screen the quality of seals based on a dye loading protocol through apertures in the chip and subsequent evaluation with fluorescence confocal microscopy. We also show the first scanning electron micrograph of a focused ion beam section of a cell in a patch-clamp chip aperture.     

Cohort analysis of a single nucleotide polymorphism on DNA chips

A method has been developed to determine SNPs on DNA chips by applying a flow-through bioscanner. As a practical application we demonstrated the fast and simple SNP analysis of 24 genotypes in an array of 96 spots with a single hybridisation and dissociation experiment. The main advantage of this methodical concept is the parallel and fast analysis without any need of enzymatic digestion. Additionally, the DNA chip format used is appropriate for parallel analysis up to 400 spots. The polymorphism in the gene of the human phenol sulfotransferase SULT1A1 was studied as a model SNP. Biotinylated PCR products containing the SNP (The SNP summary web site: ) (mutant) and those containing no mutation (wild-type) were brought onto the chips coated with NeutrAvidin using non-contact spotting. This was followed by an analysis which was carried out in a flow-through biochip scanner while constantly rinsing with buffer. After removing the non-biotinylated strand a fluorescent probe was hybridised, which is complementary to the wild-type sequence. If this probe binds to a mutant sequence, then one single base is not fully matching. Thereby, the mismatched hybrid (mutant) is less stable than the full-matched hybrid (wild-type). The final step after hybridisation on the chip involves rinsing with a buffer to start dissociation of the fluorescent probe from the immobilised DNA strand. The online measurement of the fluorescence intensity by the biochip scanner provides the possibility to follow the kinetics of the hybridisation and dissociation processes. According to the different stability of the full-match and the mismatch, either visual discrimination or kinetic analysis is possible to distinguish SNP-containing sequence from the wild-type sequence.     

Development of a high-throughput Candida albicans biofilm chip

We have developed a high-density microarray platform consisting of nano-biofilms of Candida albicans. A robotic microarrayer was used to print yeast cells of C. albicans encapsulated in a collagen matrix at a volume as low as 50 nL onto surface-modified microscope slides. Upon incubation, the cells grow into fully formed "nano-biofilms". The morphological and architectural complexity of these biofilms were evaluated by scanning electron and confocal scanning laser microscopy. The extent of biofilm formation was determined using a microarray scanner from changes in fluorescence intensities due to FUN 1 metabolic processing. This staining technique was also adapted for antifungal susceptibility testing, which demonstrated that, similar to regular biofilms, cells within the on-chip biofilms displayed elevated levels of resistance against antifungal agents (fluconazole and amphotericin B). Thus, results from structural analyses and antifungal susceptibility testing indicated that despite miniaturization, these biofilms display the typical phenotypic properties associated with the biofilm mode of growth. In its final format, the C. albicans biofilm chip (CaBChip) is composed of 768 equivalent and spatially distinct nano-biofilms on a single slide; multiple chips can be printed and processed simultaneously. Compared to current methods for the formation of microbial biofilms, namely the 96-well microtiter plate model, this fungal biofilm chip has advantages in terms of miniaturization and automation, which combine to cut reagent use and analysis time, minimize labor intensive steps, and dramatically reduce assay costs. Such a chip should accelerate the antifungal drug discovery process by enabling rapid, convenient and inexpensive screening of hundreds-to-thousands of compounds simultaneously.     

Automatic bio-sampling chips integrated with micro-pumps and micro-valves for disease detection

The present study reports a microfluidic system using the concept of membrane-movement to design and fabricate micro-pneumatic valves and pumps to form a bio-sensing diagnostic chip. The automatic bio-sampling system includes a micro-diagnostic chip fabricated by using MEMS (micro-electro-mechanical systems) technology and an automatic platform comprising of a control circuit, a compressed air source and several electromagnetic valve switches. The control circuit is used to regulate the electromagnetic valve switches, causing thin PDMS membranes to deflect pneumatically by the compressed air and generate valving and pumping effects. The micro-diagnostic chip allows for the quick detection of diseases. Compared to large-scale systems, the new microfluidic system uses smaller amounts of samples and reagents and performs fast diagnosis in an automated format. Instead of using traditional pneumatic micro-pumps, the current study adopts a new design called "spider-web" micro-pumps to increase the pumping rate, and more importantly, improve the uniformity of flow rates inside multiple micro-channels. Experimental data show that for disease diagnosis, the bio-sensing chips integrated with the micro-pneumatic valves and the peristaltic micro-pumps could successfully perform diagnosis tests. Small amounts of samples and reagents could be injected into the diagnosis chips using the micro-pumps and the micro-pneumatic valves could effectively control the movement of the samples and reagents. In order to demonstrate the functionality of the developed device, detection of hepatitis C virus (HCV) and syphilis has been performed using the bio-sampling chips. Experimental data show that fluorescence signals from the microfluidic system were comparable to the ones using conventional testing methods. The developed chip could be easily extended for multiple disease detection. The automatic bio-sensing chips could provide a useful tool for fast disease detection and be crucial for a micro-total-analysis system.     

Optical sectioning microscopy

Confocal scanning microscopy, a form of optical sectioning microscopy, has radically transformed optical imaging in biology. These devices provide a powerful means to eliminate from images the background caused by out-of-focus light and scatter. Confocal techniques can also improve the resolution of a light microscope image beyond what is achievable with widefield fluorescence microscopy. The quality of the images obtained, however, depends on the user's familiarity with the optical and fluorescence concepts that underlie this approach. We describe the core concepts of confocal microscopes and important variables that adversely affect confocal images. We also discuss data-processing methods for confocal microscopy and computational optical sectioning techniques that can perform optical sectioning without a confocal microscope.     

Peptide chips for the quantitative evaluation of protein kinase activity

Peptide chips are an emerging technology that could replace many of the bioanalytical methods currently used in drug discovery, diagnostics, and cell biology. Despite the promise of these chips, their development for quantitative assays has been limited by several factors, including a lack of well-defined surface chemistries to immobilize peptides, the heterogeneous presentation of immobilized ligands, and nonspecific adsorption of protein to the substrate. This paper describes a peptide chip that overcomes these limitations, and demonstrates its utility in activity assays of the nonreceptor tyrosine kinase c-Src. The chip was prepared by the Diels-Alder-mediated immobilization of the kinase substrate AcIYGEFKKKC-NH(2) on a self-assembled monolayer of alkanethiolates on gold. Phosphorylation of the immobilized peptides was characterized by surface plasmon resonance, fluorescence, and phosphorimaging. Three inhibitors of the enzyme were quantitatively evaluated in an array format on a single, homogeneous substrate.     

APEX disease gene resequencing: mutations in exon 7 of the p53 tumor suppressor gene.

Detection of mutations in disease genes will be a significant application of genomic research. Methods for detecting mutations at the single nucleotide level are required in highly mutated genes such as the tumor suppressor p53. Resequencing of an individual patient's DNA by conventional Sanger methods is impractical, calling for novel methods for sequence analysis. Toward this end, an arrayed primer extension (APEX) method for identifying sequence alterations in primary DNA structure was developed. A two-dimensional array of immobilized primers (DNA chip) was fabricated to scan p53 exon 7 by single bases. Primers were immobilized with 200 microm spacing on a glass support. Oligonucleotide templates of length 72 were used to study individual APEX resequencing reactions. A template-dependent DNA polymerase extension was performed on the chip using fluorescein-labeled dideoxynucleotides (ddNTPs). Labeled primers were evanescently excited and the induced fluorescence was imaged by CCD. The average signal-to-noise ratio (S/N) observed was 30:1. Software was developed to analyze high-density DNA chips for sequence alterations. Deletion, insertion, and substitution mutations were detected. APEX can be used to scan for any mutation (up to two-base insertions) in a known region of DNA by fabricating a DNA chip comprising complementary primers addressing each nucleotide in the wild-type sequence. Since APEX is a parallel method for determining DNA sequence, the time required to assay a region is independent of its length. APEX has a high level of accuracy, is sequence-based, and can be miniaturized to analyze a large DNA region with minimal reagents.     

Fabrication of titanium based MALDI bacterial chips for rapid, sensitive and direct analysis of pathogenic bacteria

For the first time, we report the fabrication of a titanium bacterial chip for MALDI-MS produced from a simple, cost effective and rapid heat treatment process. This bacterial chip can be reused many times and is highly versatile. These bacterial chips serve dual roles: (1) They can be applied as MALDI-MS target plates for direct and highly sensitive bacterial analysis. (2) They can be used as bacterial sensors for direct analysis of the captured bacteria using MALDI-MS. The sensitivity of these chips when used as bacterial sensors is <10(3)cfu/mL. The lowest detectable concentration for direct MALDI-MS analysis was found to be 10(4)cfu/mL. The results were further justified by using standard plate counting method combined with Tukey-Kramer statistical analysis and fluorescence imaging followed by image processing for fluorescence quantification using ImageJ software to substantiate the MALDI-MS results.     

Comparative studies on species identification of Noctuoidea moths in two nature reserve conservation zones (Beijing,China) using DNA barcodes and thin‐film biosensor chips

Rapid and accurate identification of species is required for the biological control of pest Noctuoidea moths. DNA barcodes and thin‐film biosensor chips are two molecular approaches that have gained wide attention. Here, we compare these two methods for the identification of a limited number of Noctuoidea moth species. Based on the commonly used mitochondrial gene cytochrome c oxidase I (the standard DNA barcode for animal species), 14 probes were designed and synthesized for 14 species shared by two national nature reserves in Beijing and Hebei, China. Probes ranged in length from 18 to 27 bp and were designed as mismatch probes to guarantee that there were at least three base differences between the probe and nontarget sequences. The results on the chip could be detected by the naked eye without needing special equipment. No cross‐hybridizations were detected although we tested all probes on the 14 target and 24 nontarget Noctuoidea species. The neighbour‐joining tree of the 38 species based on COI sequences gave 38 highly supported independent groups. Both DNA barcoding and thin‐film biosensor chips, based on the COI gene, are able to accurately identify and discriminate the 14 targeted moth species in this study. Because of its speed, high accuracy and low cost, the thin‐film biosensor chip is a very practical means of species identification. Now, a more comprehensive chip will be developed for the identification of additional Noctuoidea moths for pest control and ecological protection.     

微流控芯片监测绿色荧光蛋白在枯草芽孢杆菌中的表达

目前主要使用激光共聚焦扫描显微镜观察绿色荧光蛋白的表达,但需要昂贵的仪器并耗费大量时间。本研究开发了一种新型激光诱导的微流芯片检测系统来监测绿色荧光蛋白在枯草芽孢杆菌中的表达。该系统主要由激光装置、光路系统、微流控芯片、光电倍增管和计算机处理系统等5部分组成。对该系统的测试结果显示,随着诱导强度的增强监测信号峰也随之增强,并且与激光共聚焦显微镜观察的结果一致。利用该芯片系统能够快速准确地筛选和鉴定用绿色荧光蛋白作为标记的细胞克隆,可以替代PCR鉴定方法。但该系统仅仅能够监测表达强度,不能够满足蛋白定位等高水平研究,因此,该系统适合应用于环境的微生物监测、药物筛选和其他无需观察蛋白定位等研究。     

A Fluorescence Detection and Selection Device for Dna-Molecules Bound to Microspheres

Abstract

A device for the detection and selection of DNA-molecules bound to microspheres has been realized. It is based on a quartz chip with a capillary flowsystem, and confocal fluorescence detection of DNA. The device is to be used to identify and isolate single DNA-molecules for sequencing experiments.     

Bioengineering and characterization of DNA-protein assemblies floating on supported membranes.

A biodevice involving thiolated ssDNA and engineered cytochrome b5 linked through a cis-platine bridge is described. This original nanostructure is associated to a supported membrane through a floating anchor, thus constituting a dynamic bidimensionnal DNA capture device contrasting with the constrained geometry of currently available DNA chips. Characterization by optical spectroscopy, surface plasmon resonance and gel electrophoresis demonstrated that an unique molecular supra-assembly featuring specific DNA recognition capability has been obtained. This device is characterized by the reversibility of its assembly, self-organization and fluidity properties and is of interest as a prototype to design new generations of DNA chip biosensors.     

DNA芯片技术在微生物学研究中的应用

DNA芯片技术作为一种高通量的核酸分析方法,已经成为“后基因组时代”中研究海量序列信息的重要分析工具之一。本简述了目前一些常用以及和新出现的DNA芯片的技术原理,并从微生物基因表达谱研究,微生物基因组学研究以及微生物检测鉴定研究等多个方面概述了DNA芯片技术在微生物学中的应用,同时在对DNA芯片技术的不足进行简要分析的基础上,展望了其进一步应用的前景。     

几种新型生物芯片的研究进展

随着生物芯片技术的迅速发展,一些新型生物芯片,如生物电子芯片、凝胶元件微阵列芯片、药物控释芯片、毛细管电泳或层析芯片、PCR芯片及生物传感芯片等应运而生,这些芯片不同于常规的分子微阵列芯片,而是以各种结构微阵列为基础,用于分子杂交与扩增,以检测突变、分析多态性及测序,通过电泳及层析分离生物样品,控制药物释放以治疗疾病,作为生物传感器检测分子行为等,具有分析速度快、效率高、样品消耗少等特点,将成为生命科学与医学领域的新工具.     

基孔肯雅病毒和辛德毕斯病毒可视化基因芯片与荧光基因芯片的建立

根据GenBank中收录的基孔肯雅病毒和辛德毕斯病毒E蛋白基因序列,设计及筛选针对2种病毒的寡核苷酸探针及引物,制备基孔肯雅病毒与辛德毕斯病毒可视化基因芯片与荧光基因芯片,对芯片的灵敏性、特异性进行了验证,并将可视化基因芯片、荧光基因芯片进行灵敏性比较.结果显示,制备的两种基因芯片都能检测到基孔肯雅病毒和辛德毕斯病毒特异性杂交信号.可视化基因芯片、荧光基因芯片检测两种病毒质粒的灵敏度达到9.1×103 copies/mL, 6.8×101 copies/mL和9.1×104 copies/mL, 6.8×103 copies/mL,与普通PCR比较差异显著. 荧光基因芯片灵敏度是PCR方法的10倍,可视化基因芯片是荧光基因芯片灵敏度的100倍. 模拟病毒检测过程特异性检验证明,可视化基因芯片都具有良好的特异性.本试验建立了基孔肯雅病毒与辛德毕斯病毒两种特异的可视化和荧光基因芯片检测方法,两种方法灵敏度高、特异性强,适用于基孔肯雅病毒与辛德毕斯病毒的流行病学调查和种特异性鉴定.     

From DNA biosensors to gene chips

Wide-scale DNA testing requires the development of small, fast and easy-to-use devices. This article describes the preparation, operation and applications of biosensors and gene chips, which provide fast, sensitive and selective detection of DNA hybridization. Various new strategies for DNA biosensors and gene chips are examined, along with recent trends and future directions. The integration of hybridization detection schemes with the sample preparation process in a ‘Lab-on-a-Chip’ format is also covered. While the use of DNA biosensors and gene chips is at an early stage, such devices are expected to have an enormous effect on future DNA diagnostics.     

Generation of bioreagents for protein chips

Protein microarrays have the potential to dramatically increase the throughput of proteomic analysis. Protein expression profiling chips with distinct spots of immobilized protein capture agents will allow the simultaneous measurement of hundreds to thousands of proteins from one sample. In contrast to DNA chips, for which the capture probes are easily designed and synthesized, the development of content for protein biochips is a long and laborious process. Careful consideration must be given to the specificities desired, the format of the assay, and the requirements of the capture agents, as well as to process optimization to minimize development time and cost. Monoclonal antibodies have been the prime choice as protein capture agents for the majority of protein chips developed to date. New technologies for the production of protein capture agents are more amenable to automation than traditional monoclonal antibody production and therefore carry the promise for industrialization.