The role of structural reorganization in charge carrier transfer in DNA molecule

A model of hole transfer in DNA molecules has been proposed, which takes into account changes in the reorganization energy and orbital coupling between the neighboring bases during the charge transfer in different molecular sequences. It is shown that the rate of hole transfer by the superexchange and hopping transfer mechanisms is limited by the relaxation of the geometries of nucleobases participating in charge migration and the dynamics of solvent molecules. The rate of charge transfer in the DNA molecule is found to be dependent on the height of the potential barriers between the nucleotide and the molecular sequences. The inclusion of the interchain charge transfer, which is characterized by weak coupling between the nucleotides located in opposite strands, does not affect the general charge transport in DNA. The increase in the number of the parallel components of the hopping mechanism leads to a rise in the charge transfer rate in the double helix.     

Stepwise oscillatory circuits of a DNA molecule

A DNA molecule is characterized by a stepwise oscillatory circuit where every base pair is a capacitor, every phosphate bridge is an inductance, and every deoxyribose is a charge router. The circuitry accounts for DNA conductivity through both short and long distances in good agreement with experimental evidence that has led to the identification of the so-called super-exchange and multiple-step hopping mechanisms. However, in contrast to the haphazard hopping and super-exchanging events, the circuitry is a well-defined charge transport mechanism reflecting the great reliability of the genetic substance in delivering electrons. Stepwise oscillatory charge transport through a nucleotide sequence that directly modulates the oscillation frequency may have significant biological implications.     

Dynamics of charge carrier transfer in a DNA molecule

An equivalent electric circuit has been developed which describes the charge transfer in DNA molecule. A computer simulation of the charge carrier transfer dynamics in the molecule has been performed based on this circuit. It was found that the switching time of a molecular junction lies in the femtosecond range and depends on the frequency of the input electric signal. An increase in the frequency of the input signal in the range from 1 GHz to 4 THz and a reduction of temperature lead to a decrease in the current passing through the DNA molecule. It has been shown that the sequence of the DNA base pairs defines the rate of localization and delocalization of holes and controls the signal propagation rate in the DNA molecule.     

Theoretical investigation of auxiliary electronic acceptors in modifying D-D-π-A sensitizers for dye-sensitized solar cells

In light of the performance of the SD2 pigments in DSSC, in order to expand the absorption spectral scope, decrease the energy difference between the highest occupied and the lowest unoccupied molecular orbitals, with SD2 dye molecular electron donor and electron acceptor as the fundamental framework, the indole fragment and thiophene derivative in the prototype dye molecule were replaced by the two π-bridges (labeled PA, PB, respectively) and the four auxiliary electron acceptors (labeled A1, A2, A3, A4, respectively). For the sake of characterizing dye molecules as thoroughly as possible in DSSC, the frontier orbital energy levels, ultraviolet absorption spectra, natural bond orbital analysis, intramolecular charge transfer, charge and hole reorganization energies, parameters influencing the short-circuit current density and the open-circuit photovoltage for these eight individual dye molecules are carried out to try to fully characterize the properties of these dye molecules. According to these computational results of physical quantities and based on the performance of these dye molecules in the above aspects, in this paper, six free molecular models were picked out to combine with titanium dioxide cluster to calculate their geometrical structures, frontier orbital distributions, electron excitation energies, ultraviolet absorption spectra and the composition of the electronic transitions in chloroform solvent with polarizable continuum model. The results of these calculations show that the PA-A2 and PB-A4 dye molecule has better properties in electron transfer and spectral absorption range before and after the adsorption on the titanium dioxide.     

Donor-enhanced bridge effect on the electronic properties of triphenylamine based dyes: density functional theory investigations

The geometries have been optimized by using density functional theory. The highest occupied molecular orbitals are delocalized on triphenylamine moiety while lowest unoccupied molecular orbital are localized on anchoring group. Intramolecular charge transfer has been observed from highest occupied molecular orbitals to lowest unoccupied molecular orbital. By replacing the vinyl hydrogens with methoxy as well as one benzene ring as bridge leads to a raised energy gap while extending the bridge decreases the energy gap compared to parent molecule. The HOMO energies bump up by extending the bridge. The LUMO energies of all the investigated dyes are above the conduction band of TiO(2) and HOMOs are below the redox couple except 3c. The distortion between anchoring group and triphenylamine can hamper the recombination reaction.     

On the efficiency of hole and electron transfer from the hydration layer to DNA: An EPR study of crystalline DNA X-irradiated at 4 K

The aim of this project was to gain an improved understanding of how the efficiency of hole and electron transfer from the solvation layer to DNA decreases as a function of distance from DNA. The packing of DNA in crystals of known structure makes it possible to calculate the degree of DNA hydration with a precision that is significantly greater than that achievable for amorphous samples. Previous work on oligodeoxynucleotide crystals has demonstrated that the efficiency of free radical trapping by DNA exposed to ionizing radiation at 4 K is relatively insensitive to base sequence, conformation, counterion, or base stacking continuity. Having eliminated these confounding variables, it is now possible to ascertain the degree of radical transfer that occurs from ionized water as a function of DNA hydration (Gamma, in mol water/mol nucleotide). EPR is used to measure the hydroxyl radical concentration in crystals irradiated at 4 K. From a lack of hydroxyl radicals trapped in the inner hydration mantle, we determine that hole transfer to DNA is complete for water molecules located within 8 A. This corresponds to Gamma = 9-11 and indicates that hole transfer is 100% (as efficient as direct ionization of DNA) for water molecules adjacent to DNA. Beyond approximately 8 A (Gamma > 10), hydroxyl radicals are observed; thus deprotonation of the water radical cation is seen to compete with hole transfer to DNA as soon as one water intervenes between the ionized water and DNA. The boundary for 0% hole transfer is projected to occur somewhere between 15 and 20 waters per nucleotide. Electron transfer, on the other hand, is 100% efficient across the entire range studied, 4.2 相似文献   

Spatial order as a source of kinetic cooperativity in organized bound enzyme systems.

When enzyme molecules are distributed within a negatively charged matrix, the kinetics of the conversion of a negatively charged substrate into a product depends on the organization of fixed charges and bound enzyme molecules. Organization is taken to mean the existence of macroscopic heterogeneity in the distribution of fixed charge density, or of bound enzyme density, or of both. The degree of organization is quantitatively expressed by the monovariate moments of charge and enzyme distributions as well as by the bivariate moments of these two distributions. The overall reaction rate of the bound enzyme system may be expressed in terms of the monovariate moments of the charge density and of the bivariate moments of charge and enzyme densities. The monovariate moments of enzyme density do not affect the reaction rate. With respect to the situation where the fixed charges and enzyme molecules are randomly distributed in the matrix, the molecular organization, as expressed by these two types of moments, generates an increase or decrease of the overall reaction rate as well as a cooperativity of the kinetic response of the system. Thus both the alteration of the rate and the modulation of cooperativity are the consequence of a spatial organization of charges with respect to the enzyme molecules. The rate equations have been derived for different types of organization of fixed charges and enzyme molecules, namely, clustered charges and homogeneously distributed enzyme molecules, clustered enzyme molecules and homogeneously distributed charges, clusters of charges and clusters of enzymes that partly overlap, and clusters of enzymes and clusters of charges that are exactly superimposed. Computer simulations of these equations show how spatial molecular organization may modulate the overall reaction rate.     

Molecular orbital study on the effect of the binding of water to base pair

The effects of binding water to base pairs was studied by means of the CNDO/2 molecular orbital method. The solvation energy is largest when water is bound as a proton donor and is smallest when it is stacked parallel to the plane of the base pair. The effects of two water molecules are nearly additive. The binding of one water molecule to the adenineuracil pair makes one of the two hydrogen bonds stronger and the other weaker. The change in the hydrogen bonding force is explained in terms of electrostatic and charge transfer energies. By the comparison with the adenine-cytosine pair, it is revealed that the binding of water to adenine serves to yield larger solvation energy for the complementary A-U pair than for the non-complementary A-C pair. It was also observed that the solvation energy due to the binding of water to pyrimidine was larger for A-C than for A-U.     

Features of two hepatitis B virus (HBV) DNA integrations suggest mechanisms of HBV integration.

Two integrated hepatitis B virus (HBV) DNA molecules were cloned from two primary hepatocellular carcinomas each containing only a single integration. One integration (C3) contained a single linear segment of HBV DNA, and the other integration (C4) contained a large inverted duplication of viral DNA at the site of a chromosome translocation (O. Hino, T.B. Shows, and C.E. Rogler, Proc. Natl. Acad. Sci. USA 83:8338-8342, 1986). Sequence analysis of the virus-cell junctions of C3 placed the left virus-cell junction at nucleotide 1824, which is at the 5' end of the directly repeated DR1 sequence and is 6 base pairs from the 3' end of the long (L) negative strand. The right virus-cell junction was at nucleotide 1762 in a region of viral DNA (within the cohesive overlap) which shared 5-base-pair homology with cellular DNA. Sequence analysis of the normal cellular DNA across the integration site showed that 11 base pairs of cellular DNA were deleted at the site of integration. On the basis of this analysis, we suggest a mechanism for integration of the viral DNA molecule which involves strand invasion of the 3' end of the L negative strand of an open circular or linear HBV DNA molecule (at the DR1 sequence) and base pairing of the opposite end of the molecule with cellular DNA, accompanied by the deletion of 11 base pairs of cellular DNA during the double recombination event. Sequencing across the inverted duplication of HBV DNA in clone C4 located one side of the inversion at nucleotide 1820, which is 2 base pairs from the 3' end of the L negative strand. Both this sequence and the left virus-cell junction of C3 are within the 9-nucleotide terminally redundant region of the HBV L negative strand DNA. We suggest that the terminal redundancy is a preferred topoisomerase I nicking region because of both its base sequence and forked structure. Such nicking would lead to integration and rearrangement of HBV molecules within the terminal redundancy, as we have observed in both our clones.     

Combined hopping-superexchange mechanism of charge transfer in DNA: Consideration of nearest interactions

Within the framework of a previously developed combined hopping-superexchange mechanism, a model of charge transfer in DNA is proposed that takes into account all nearest interactions. The charge transfer rate constants calculated using this model for a number of nucleotide sequences agree well with the experimentally measured values.     

Correct and incorrect nucleotide incorporation pathways in DNA polymerase beta

Tracking the structural and energetic changes in the pathways of DNA replication and repair is central to the understanding of these important processes. Here we report favorable mechanisms of the polymerase-catalyzed phosphoryl transfer reactions corresponding to correct and incorrect nucleotide incorporations in the DNA by using a novel protocol involving energy minimizations, dynamics simulations, quasi-harmonic free energy calculations, and mixed quantum mechanics/molecular mechanics dynamics simulations. Though the pathway proposed may not be unique and invites variations, geometric and energetic arguments support the series of transient intermediates in the phosphoryl transfer pathways uncovered here for both the G:C and G:A systems involving a Grotthuss hopping mechanism of proton transfer between water molecules and the three conserved aspartate residues in pol beta's active-site. In the G:C system, the rate-limiting step is the initial proton hop with a free energy of activation of at least 17 kcal/mol, which corresponds closely to measured k(pol) values. Fidelity discrimination in pol beta can be explained by a significant loss of stability of the closed ternary complex of the enzyme in the G:A system and much higher activation energy of the initial step of nucleophilic attack, namely deprotonation of terminal DNA primer O3'H group. Thus, subtle differences in the enzyme active-site between matched and mismatched base pairs generate significant differences in catalytic performance.     

Hole Transport Between G Bases in DNA

Abstract

The mobility of positive charge in double stranded DNA was investigated. We found that long range hole transport efficiencies depend on the sequence and can be explained by a hole hopping process between G bases.     

Energy bands and electronic delocalization in the sugar-phosphate backbone of DNA

The results of a CNDO/2 all-valence electron crystal orbital study are reported for the sugar-phosphate chain of DNA. The valence and conduction bandwidths are found to be large enough to make electronic delocalization through this backbone possible. Different mechanisms for charge carrier transport in DNA are compared on the basis of the electron and hole effective masses. Conduction along the backbone seems to be at least as probable as through the aperiodic system of the superimposed nucleotide bases.     

DNA recognition by intercalators and hybrid molecules

Experimental are described which probe the role of the 2-amino group of guanine as a critical determinant of the recognition of nucleotide sequences in DNA by specific ligands. Homologous samples of tyrT DNA substituted with inosine or 26-diaminopourine residues in place of guanosine or adenine respectively yield characteristically modified footprinting patterns when challenged with sequence-selective antibiotics such as echinomycin, actinomycin or netrospin. The capacity of small molecules to recognise particular DNA sequences is exploited in the ‘combilexin’ strategy to target small molecules to defined sites in DNA. A composite molecule containing a distamycin moiety linked to an intercalating ellipticine derivative has been synthesised and shown to bind tightly to DNA but without much sequence-selectivity. Refinement of this molecule based on predictions from molecular modelling has led to the synthesis of a second generation derivative bearing an additional positive charge: this new hybrid molecule is strongly selective for binding to AT-rich tracts in DNA.     

Electron transfer in DNA

Electrons migrate over long distances along the DNA in a multistep hopping process where the rate of each step depends strongly upon its length. The efficiency of this process is not only determined by the electron transfer rates but also by competing reactions with water, in which the charge carriers are trapped. Because electron transfer through DNA can occur under the conditions of oxidative stress, biological consequences are highly likely. In addition, it has been observed that some DNA-binding enzymes influence this charge transport. The question of whether DNA is a suitable material for nanolelectronic devices remains unanswered.     

Orientation of DNA molecules in agarose gels by pulsed electric fields

The electric birefringence of DNA restriction fragments of three different sizes, 622, 1426, and 2936 base pairs, imbedded in agarose gels of different concentrations, was measured. The birefringence relaxation times observed in the gels are equal to the values observed in free solution, if the median pore diameter of the gel is larger than the effective hydrodynamic length of the DNA molecule in solution. However, if the median pore diameter is smaller than the apparent hydrodynamic length, the birefringence relaxation times increase markedly, becoming equal to the values expected for the birefringence relaxation of fully stretched DNA molecules. This apparent elongation indicates that end-on migration, or reptation is a likely mechanism for the electrophoresis of large DNA molecules in agarose gels. The relaxation times of the stretched DNA molecules scale with molecular weight (or contour length) as N2.8, in reasonable agreement with reptation theories.     

Hopping and superexchange mechanisms of charge transport to DNA

A theory for charge transport in nucleobase sequences was constructed in which the hole migration proceeds via hopping between guanines. Each hop over the adenine-thymine (A-T) bridge connecting neighboring guanines occurs by means of the superexchange mechanism. The experimental data and theoretical results for various types of nucleobase sequences are compared.     

Polymerase-Tailored Variations in the Water-Mediated and Substrate-Assisted Mechanism for Nucleotidyl Transfer: Insights from a Study of T7 DNA Polymerase

The nucleotidyl transfer reaction catalyzed by DNA polymerases is the critical step governing the accurate transfer of genetic information during DNA replication, and its malfunctioning can cause mutations leading to human diseases, including cancer. Here, utilizing ab initio quantum mechanical/molecular mechanical calculations with free-energy perturbation, we carried out an extensive investigation of the nucleotidyl transfer reaction mechanism in the well-characterized high-fidelity replicative DNA polymerase from phage T7. Our defined mechanism entails an initial concerted deprotonation of a conserved crystal water molecule with protonation of the γ-phosphate of the deoxynucleotide triphosphate(dNTP) via a solvent water molecule, and then the proton on the primer 3′-terminus is transferred to the resulting hydroxide ion. Subsequently, the nucleophilic attack takes place, with the formation of a metastable pentacovalent phosphorane intermediate. Finally, the pyrophosphate leaves, facilitated by the relay of the proton on the γ-phosphate to the α-β bridging oxygen via solvent water. The computed activation free-energy barrier is consistent with kinetic data for the chemistry step with correct nucleotide incorporation in T7 DNA polymerase. This variant of the water-mediated and substrate-assisted mechanism has features tailored to the structure of the T7 DNA polymerase. However, a unifying theme in the water-mediated and substrate-assisted mechanism is the cycling through crystal and solvent water molecules of the proton originating from the primer 3′-terminus to the α-β bridging oxygen of the deoxynucleotide triphosphate; this neutralizes the evolving negative charge as pyrophosphate leaves and restores the polymerase to its pre-chemistry state. These unifying features are likely requisite elements for nucleotidyl transfer reactions.     

Effect of a mechanical tension on the hydration of DNA in fibres.

Fiber X-ray diffraction and measurement of fibre dimensions yield information about the effects of a mechanical tension on hydration of DNA in fibres. At a given relative humidity, the mechanical tension changes the DNA conformation but does not modify the number of water molecules associated to a nucleotide. The number of water molecules per nucleotide necessary to maintain B form decreases for increasing tensions applied to the DNA fibre. Form transitions can be opposed by mechanical tensions; an energy of 1 Kcal per mole of nucleotide pairs is sufficient to prevent the B to A transition.