Production of <Emphasis Type="SmallCaps">l</Emphasis>-alanine by metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

Escherichia coli W was genetically engineered to produce l-alanine as the primary fermentation product from sugars by replacing the native d-lactate dehydrogenase of E. coli SZ194 with alanine dehydrogenase from Geobacillus stearothermophilus. As a result, the heterologous alanine dehydrogenase gene was integrated under the regulation of the native d-lactate dehydrogenase (ldhA) promoter. This homologous promoter is growth-regulated and provides high levels of expression during anaerobic fermentation. Strain XZ111 accumulated alanine as the primary product during glucose fermentation. The methylglyoxal synthase gene (mgsA) was deleted to eliminate low levels of lactate and improve growth, and the catabolic alanine racemase gene (dadX) was deleted to minimize conversion of l-alanine to d-alanine. In these strains, reduced nicotinamide adenine dinucleotide oxidation during alanine biosynthesis is obligately linked to adenosine triphosphate production and cell growth. This linkage provided a basis for metabolic evolution where selection for improvements in growth coselected for increased glycolytic flux and alanine production. The resulting strain, XZ132, produced 1,279 mmol alanine from 120 g l⁻¹ glucose within 48 h during batch fermentation in the mineral salts medium. The alanine yield was 95% on a weight basis (g g⁻¹ glucose) with a chiral purity greater than 99.5% l-alanine. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fermentation of 12% (w/v) Glucose to 1.2 m Lactate by Escherichia coli Strain SZ194 using Mineral Salts Medium

A non-recombinant mutant of Escherichia coli B, strain SZ194, was developed that produces over 1 m d-lactate from glucose (or sucrose) in 72 h using mineral salts medium supplemented with 1 mm betaine in simple anaerobic fermentations. Rates and yields were highest at pH 7.5. Yields approached the theoretical maximum with only trace amounts of co-products. Chiral purity of d-lactate was estimated to be 95%. Specific and volumetric productivities for SZ194 in mineral salts medium (pH 7.5) with betaine were equivalent to those in Luria broth. Revisions requested 17 January 2006; Revisions received 7 February 2006     

Methylglyoxal Bypass Identified as Source of Chiral Contamination in l(+) and d(−)-lactate Fermentations by Recombinant Escherichia coli

Two new strains of Escherichia coli B were engineered for the production of lactate with no detectable chiral impurity. All chiral impurities were eliminated by deleting the synthase gene (msgA) that converts dihydroxyacetone-phosphate to methylglyoxal, a precursor for both l(+)- and d(−)-lactate. Strain TG113 contains only native genes and produced optically pure d(−)-lactate. Strain TG108 contains the ldhL gene from Pediococcus acidilactici and produced only l(+)-lactate. In mineral salts medium containing 1 mM betaine, both strains produced over 115 g (1.3 mol) lactate from 12% (w/v) glucose, >95% theoretical yield.     

Production of <Emphasis Type="SmallCaps">d</Emphasis>-lactic acid by <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> under oxygen deprivation

In mineral salts medium under oxygen deprivation, Corynebacterium glutamicum exhibits high productivity of l-lactic acid accompanied with succinic and acetic acids. In taking advantage of this elevated productivity, C. glutamicum was genetically modified to produce d-lactic acid. The modification involved expression of fermentative d-lactate dehydrogenase (d-LDH)-encoding genes from Escherichia coli and Lactobacillus delbrueckii in l-lactate dehydrogenase (l-LDH)-encoding ldhA-null C. glutamicum mutants to yield strains C. glutamicum ΔldhA/pCRB201 and C. glutamicum ΔldhA/pCRB204, respectively. The productivity of C. glutamicum ΔldhA/pCRB204 was fivefold higher than that of C. glutamicum ΔldhA/pCRB201. By using C. glutamicum ΔldhA/pCRB204 cells packed to a high density in mineral salts medium, up to 1,336 mM (120 g l⁻¹) of d-lactic acid of greater than 99.9% optical purity was produced within 30 h.     

Low salt medium for lactate and ethanol production by recombinant Escherichia coli B

Individual nutrient salts were experimentally varied to determine the minimum requirements for efficient l(+)-lactate production by recombinant strains of Escherichia coli B. Based on these results, AM1 medium was formulated with low levels of alkali metals (4.5 mM and total salts (4.2 g l⁻¹). This medium was equally effective for ethanol production from xylose and lactate production from glucose with average productivities of 18–19 mmol l⁻¹ h⁻¹ for both (initial 48 h of fermentation).     

Enhancement of xylitol productivity and yield using a xylitol dehydrogenase gene-disrupted mutant of Candida tropicalis under fully aerobic conditions

The effects of glycerol and the oxygen transfer rate on the xylitol production rate by a xylitol dehydrogenase gene (XYL2)-disrupted mutant of Candida tropicalis were investigated. The mutant produced xylitol near the almost yield of 100% from d-xylose using glycerol as a co-substrate for cell growth and NADPH regeneration: 50 g d-xylose l⁻¹ was completely converted into xylitol when at least 20 g glycerol l⁻¹ was used as a co-substrate. The xylitol production rate increased with the O₂ transfer rate until saturation and it was not necessary to control the dissolved O₂ tension precisely. Under the optimum conditions, the volumetric productivity and xylitol yield were 3.2 g l⁻¹ h⁻¹ and 97% (w/w), respectively.     

Improvement in lactic acid production from starch using α-amylase-secreting <Emphasis Type="Italic">Lactococcus lactis</Emphasis> cells adapted to maltose or starch

To achieve direct and efficient lactic acid production from starch, a genetically modified Lactococcus lactis IL 1403 secreting α-amylase, which was obtained from Streptococcus bovis 148, was constructed. Using this strain, the fermentation of soluble starch was achieved, although its rate was far from efficient (0.09 g l⁻¹ h⁻¹ lactate). High-performance liquid chromatography revealed that maltose accumulated during fermentation, and this was thought to lead to inefficient fermentation. To accelerate maltose consumption, starch fermentation was examined using L. lactis cells adapted to maltose instead of glucose. This led to a decrease in the amount of maltose accumulation in the culture, and, as a result, a more rapid fermentation was accomplished (1.31 g l⁻¹ h⁻¹ lactate). Maximum volumetric lactate productivity was further increased (1.57 g l⁻¹ h⁻¹ lactate) using cells adapted to starch, and a high yield of lactate (0.89 g of lactate per gram of consumed sugar) of high optical purity (99.2% of l-lactate) was achieved. In this study, we propose a new approach to lactate production by α-amylase-secreting L. lactis that allows efficient fermentation from starch using cells adapted to maltose or starch before fermentation.     

Lactose-induced Production of Human Soluble B Lymphocyte Stimulator (hsBLyS) in E. coli with Different Culture Strategies

Over-production of human soluble B lymphocyte stimulator (hsBLyS) was carried out with four different fed-batch culture strategies using lactose as inducer, instead of IPTG, in a fed-batch culture of Escherichia coli. As lactose acted as both inducer and carbon source, the best and simplest culture strategy was direct feeding of lactose after batch culture, thereby giving hsBLyS at 3.7 g l⁻¹ and a productivity of 0.11 g l⁻¹ h⁻¹. Revisions requested 1 September 2005 and 11 November 2005; Revisions received 7 November 2005 and 4 January 2006     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

Redirecting Carbon Flux in Torulopsis glabrata from Pyruvate to α-Ketoglutaric Acid by Changing Metabolic Co-factors

The nutrition conditions needed to redirect the carbon flux in Torulopsis glabrata, a pyruvate hyper-production yeast, from pyruvate to α-ketoglutaric acid (KG) were investigated in a stirred fermentor. A minor amount of KG (1.3 gl⁻¹) was produced when NaOH was used to control the pH, while 12 g KG l⁻¹ was produced when CaCO₃ was used instead. When thiamine and biotin were included in the medium, 13 g KG l⁻¹ and 68 g pyruvate l⁻¹ were produced after 48 h when glucose was nearly consumed (approximately 5 gl⁻¹). With fermentation continuing for a further 16 h, the concentration of pyruvate decreased to 31 gl⁻¹, and KG increased to 30 gl⁻¹. KG thus accumulated at the expense of pyruvate consumption. Received 2 June 2005; Revisions requested 30 June 2005 and 1 September 2005; Revisions received 1 September 2005 and 28 October 2005; Accepted 28 October 2005     

Batch and repeated batch production of l(+)-lactic acid by Enterococcus faecalis RKY1 using wood hydrolyzate and corn steep liquor

Lactic acid production was investigated for batch and repeated batch cultures of Enterococcus faecalis RKY1, using wood hydrolyzate and corn steep liquor. When wood hydrolyzate (equivalent to 50 g l⁻¹ glucose) supplemented with 15–60 g l⁻¹ corn steep liquor was used as a raw material for fermentation, up to 48.6 g l⁻¹ of lactic acid was produced with, volumetric productivities ranging between 0.8 and 1.4 g l⁻¹ h⁻¹. When a medium containing wood hydrolyzate and 15 g l⁻¹ corn steep liquor was supplemented with 1.5 g l⁻¹ yeast extract, we observed 1.9-fold and 1.6-fold increases in lactic acid productivity and cell growth, respectively. In this case, the nitrogen source cost for producing 1 kg lactic acid can be reduced to 23% of that for fermentation from wood hydrolyzate using 15 g l⁻¹ yeast extract as a single nitrogen source. In addition, lactic acid productivity could be maximized by conducting a cell-recycle repeated batch culture of E. faecalis RKY1. The maximum productivity for this process was determined to be 4.0 g l⁻¹ h⁻¹.     

Production of ascorbic acid glucoside by alginate-entrapped mycelia of <Emphasis Type="Italic">Aspergillus niger</Emphasis>

The mycelia of Aspergillus niger, cultivated in a medium containing 45 g l⁻¹ maltose, 66 g l⁻¹ yeast extract, and 5 g l⁻¹ K₂HPO₄ at 30°C and 200 rpm, were used as a biocatalyst in the glucosylation of ascorbic acid. Free mycelia from 3-day-old culture, when used in a 6-h reaction with maltose as the acyl donor, gave 16.07 g l⁻¹ ascorbic acid glucoside corresponding to a volumetric productivity of 2.68 g l⁻¹ h⁻¹ and a conversion of 67%. Mycelia from 3-day-old cultures were entrapped in calcium alginate beads and used as a catalyst in the glucosylation of ascorbic acid. An ascorbic acid-to-maltose molar ratio of 1:9 was found to be optimum, and the conversion reached 75% after 12 h. The concentration of ascorbic acid glucoside produced at this molar ratio was 17.95 g l⁻¹, and the productivity was 1.5 g l⁻¹ h⁻¹. The biocatalyst was repeatedly used in a fixed bed bioreactor for the synthesis of ascorbic acid glucoside and approximately 17 g l⁻¹ of ascorbic acid glucoside corresponding to a volumetric productivity of 1.42 g l⁻¹ h⁻¹ was produced in each use. The conversion was retained at 70% in each use. The entrapped mycelia also exhibited exceptionally high reusability and storage stability. The product was purified to 85% by anion exchange and gel permeation chromatography with a final yield of 75%.     

Expression of glf Z.m. increases D-mannitol formation in whole cell biotransformation with resting cells of Corynebacterium glutamicum

A recombinant oxidation/reduction cycle for the conversion of D-fructose to D-mannitol was established in resting cells of Corynebacterium glutamicum. Whole cells were used as biocatalysts, supplied with 250 mM sodium formate and 500 mM D-fructose at pH 6.5. The mannitol dehydrogenase gene (mdh) from Leuconostoc pseudomesenteroides was overexpressed in strain C. glutamicum ATCC 13032. To ensure sufficient cofactor [nicotinamide adenine dinucleotide (reduced form, NADH)] supply, the fdh gene encoding formate dehydrogenase from Mycobacterium vaccae N10 was coexpressed. The recombinant C. glutamicum cells produced D-mannitol at a constant production rate of 0.22 g (g cdw)⁻¹ h⁻¹. Expression of the glucose/fructose facilitator gene glf from Zymomonas mobilis in C. glutamicum led to a 5.5-fold increased productivity of 1.25 g (g cdw)⁻¹ h⁻¹, yielding 87 g l⁻¹ D-mannitol from 93.7 g l⁻¹ D-fructose. Determination of intracellular NAD(H) concentration during biotransformation showed a constant NAD(H) pool size and a NADH/NAD⁺ ratio of approximately 1. In repetitive fed-batch biotransformation, 285 g l⁻¹ D-mannitol over a time period of 96 h with an average productivity of 1.0 g (g cdw)⁻¹ h⁻¹ was formed. These results show that C. glutamicum is a favorable biocatalyst for long-term biotransformation with resting cells. Dedicated to Prof. Hermann Sahm on the occasion of his 65th birthday.     

Degradation of diphenyl phthalate by <Emphasis Type="Italic">Sphingomonas chungbukensis</Emphasis>

More than 80% of diphenyl phthalate (DPP) at 100 mg l⁻¹ was degraded by Sphingomonas chungbukensis KCTC 2955 in a mineral salts medium at pH 7.0 and 30°C within 48 h. The maximum specific degradation rate was 5 mg DPP l⁻¹ h⁻¹. It was rapidly converted to monophenyl phthalate and phthalic acid which were further degraded.     

Succinic acid production by a newly isolated bacterium

A new bacterial strain producing succinic acid was enriched from bovine rumen content. It is facultatively anaerobic, belongs to the family Pasteurellaceae and has similarity to the genus Mannheimia. In batch cultivations with D-glucose or sucrose the strain produced up to 5.8 g succinic acid l⁻¹ with a productivity and a yield of up to 1.5 g l⁻¹ h⁻¹ and 0.6 g g⁻¹, respectively. With crude glycerol up to 8.4 g l⁻¹, 0.9 g l⁻¹ h⁻¹ and 1.2 g g⁻¹ were obtained. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

An efficient succinic acid production process in a metabolically engineered <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> strain

A Corynebacterium glutamicum strain (ΔldhA-pCRA717) that overexpresses the pyc gene encoding pyruvate carboxylase while simultaneously exhibiting a disrupted ldhA gene encoding l-lactate dehydrogenase was investigated in detail for succinic acid production. Succinic acid was shown to be efficiently produced at high-cell density under oxygen deprivation with intermittent addition of sodium bicarbonate and glucose. Succinic acid concentration reached 1.24 M (146 g l⁻¹) within 46 h. The yields of succinic acid and acetic acid from glucose were 1.40 mol mol⁻¹ (0.92 g g⁻¹) and 0.29 mol mol⁻¹ (0.10 g g⁻¹), respectively. The succinic acid production rate and yield depended on medium bicarbonate concentration rather than glucose concentration. Consumption of bicarbonate accompanied with succinic acid production implied that added bicarbonate was used for succinic acid synthesis.     

High-density Escherichia coli cultures for continuous l(−)-carnitine production

The use of a biological procedure for l-carnitine production as an alternative to chemical methods must be accompanied by an efficient and highly productive reaction system. Continuous l-carnitine production from crotonobetaine was studied in a cell-recycle reactor with Escherichia coli O44 K74 as biocatalyst. This bioreactor, running under the optimum medium composition (25 mM fumarate, 5 g/l peptone), was able to reach a high cell density (26 g dry weight/l) and therefore to obtain high productivity values (6.2 g l-carnitine l⁻¹ h⁻¹). This process showed its feasibility for industrial l-carnitine production. In addition, resting cells maintained in continuous operation, with crotonobetaine as the only medium component, kept their biocatalytic capacity for 4 days, but the biotransformation capacity decreased progressively when this particular method of cultivation was used. Received: 10 December 1998 / Received revision: 19 February 1999 / Accepted: 20 February 1999