Rapid binding of concanavalin A and maltose-polyrotaxane conjugates due to mobile motion of alpha-cyclodextrins threaded onto a poly(ethylene glycol)

Maltose-polyrotaxane conjugates (Mal-PRXs), in which maltose-conjugated alpha-cyclodextrins (alpha-CDs) are threaded onto a poly(ethylene glycol) (PEG) chain capped with benzyloxycarbonyl-L-tyrosine, were characterized in terms of their molecular motion and the relation to multivalent interactions between the maltose moiety and concanavalin A from Canavalia ensiformis (Con A). Spin-lattice relaxation time (T1) and spin-spin relaxation time (T2) of alpha-CD C(1), maltosyl C(1), and PEG methylene protons in the Mal-PRXs revealed that the mobile motion of alpha-CDs in the polyrotaxane governed the molecular motion of maltosyl groups in alpha-CDs and threading PEG chain. The association constant (Ka) of the Mal-PRXs with 22, 38 and 53% of alpha-CD threading was 5.7 x 10(4), 1.1 x 10(6), and 5.3 x 10(5) (M(-1)-maltose), respectively. The largest Ka value of the Mal-PRX with 38% of alpha-CD threading was well correlated with the T1 and T2 values of maltosyl groups and alpha-CD, suggesting that the mobile motion of maltose-conjugated alpha-CDs in the Mal-PRX contributes to the highest affinity with Con A. Initial rate of binding with Con A was also governed by the mobile motion of maltose-conjugated alpha-CDs. Therefore, we concluded that both highly molecular motion due to the mobile motion of maltose-conjugated alpha-CDs and multivalency of the Mal-PRXs contributes to inducing rapid Con A binding.     

Synthesis and characterization of polyrotaxanes consisting of cationic alpha-cyclodextrins threaded on poly[(ethylene oxide)-ran-(propylene oxide)] as gene carriers

Cationic polymers have been receiving growing attention as gene delivery carriers. Herein, a series of novel cationic supramolecular polyrotaxanes with multiple cationic alpha-cyclodextrin (alpha-CD) rings threaded and blocked on a poly[(ethylene oxide)-ran-(propylene oxide)] (P(EO-r-PO)) random copolymer chain were synthesized and investigated for gene delivery. In the cationic polyrotaxanes, approximately 12 cationic alpha-CD rings were threaded on the P(EO-r-PO) copolymer with a molecular weight of 2370 Da and an EO/PO molar ratio of 4:1, while the cationic alpha-CD rings were grafted with linear or branched oligoethylenimine (OEI) of various chain lengths and molecular weights up to 600 Da. The OEI-grafted alpha-CD rings were only located selectively on EO segments of the P(EO-r-PO) chain, while PO segments were free of complexation. This increased the mobility of the cationic alpha-CD rings and the flexibility of the polyrotaxanes, which enhanced the interaction of the cationic alpha-CD rings with DNA and/or the cellular membrane. All cationic polyrotaxanes synthesized in this work could efficiently condense plasmid DNA to form nanoparticles that were suitable for delivery of the gene. Cytotoxicity studies showed that the cationic polyrotaxanes with all linear OEI chains of molecular weights up to 423 Da exhibited much less cytotoxicity than high-molecular-weight branched polyethylenimine (PEI) (25 kDa) in both HEK293 and COS7 cell lines. The cationic polyrotaxanes displayed high gene transfection efficiencies in a variety of cell lines including HEK293, COS7, BHK-21, SKOV-3, and MES-SA. Particularly, the gene delivery capability of the cationic polyrotaxanes in HEK293 cells was much higher than that of high-molecular-weight branched PEI (25 k).     

Synthesis of a biocleavable polyrotaxane-plasmid DNA (pDNA) polyplex and its use for the rapid nonviral delivery of pDNA to cell nuclei

This protocol provides a method for synthesizing a biocleavable polyrotaxane/plasmid DNA (pDNA) polyplex and for using it to deliver pDNA into cell nuclei. The biocleavable polyrotaxane is synthesized in four steps: (i) introduction of disulfide linkages at both terminals of PEG, (ii) preparation of an inclusion complex between disulfide-containing PEG and alpha-cyclodextrins (alpha-CDs), (iii) synthesis of polyrotaxane and (iv) modification of alpha-CDs in the polyrotaxane with dimethylethylenediamine. A polyplex of pDNA with the polyrotaxane is formed when the two compounds are dissolved together in a phosphate buffer. Subcellular localization of rhodamine-labeled pDNA in fluorescently labeled organelles is quantified by Z-series of confocal images captured by confocal laser scanning microscopy. Significant amounts of pDNA delivered to the nucleus can be expected as well as high transfection activity of the polyplex. This protocol can be completed in 23-32 d.     

"Click labeling" with 2-[18f]fluoroethylazide for positron emission tomography

As an effort in the development of more flexible (18)F-labeling chemistry, we report herein on the use of the Cu(I)-catalyzed Huisgen cycloaddition, also known as the "click reaction", to form (18)F-labeled 1,2,3-triazoles. Nucleophilic fluorination of 2-azidoethyl-4-toluenesulfonate followed by distillation provided 2-[(18)F]fluoroethylazide in 55% radiochemical yield (decay-corrected). 2-[(18)F]fluoroethylazide was reacted with a small library of terminal alkynes in the presence of excess Cu(2+)/ascorbate or copper powder. The most reactive alkyne, N-benzylpropynamide provided nearly quantitative incorporation of 2-[(18)F]fluoroethylazide after 15 min at ambient temperature, whereas the majority of the alkyne substrates provided excellent yields of the corresponding (18)F-labeled 1,2,3-triazoles following heating to 80 degrees C. Using the method described, a model peptide was obtained in 92.3 +/- 0.3% (n = 3) radiochemical yield (decay-corrected) after purification by semipreparative HPLC.     

Polyrotaxanes for applications in life science and biotechnology

Due to their low cytotoxicity, controllable size, and unique architecture, cyclodextrin (CD)-based polyrotaxanes and polypseudorotaxanes have inspired interesting exploitation as novel biomaterials. This review will update the recent progress in the studies on the structures of polyrotaxanes and polypseudorotaxanes based on different CDs and polymers, followed by summarizing their potential applications in life science and biotechnology, such as drug delivery, gene delivery, and tissue engineering. CD-based biodegradable polypseudorotaxane hydrogels could be used as promising injectable drug delivery systems for sustained and controlled drug release. Polyrotaxanes with drug or ligand-conjugated CDs threaded on polymer chain with biodegradable end group could be useful for controlled and multivalent targeting delivery. Cationic polyrotaxanes consisting of multiple oligoethylenimine-grafted CDs threaded on a block copolymer chain were attractive non-viral gene carries due to the strong DNA-binding ability, low cytotoxicity, and high gene transfection efficiency. Cytocleavable end caps were also introduced in the polyrotaxane systems in order to ensure efficient endosomal escape for intracellular trafficking of DNA. Finally, hydrolyzable polyrotaxane hydrogels with cross-linked α-CDs could be a desirable scaffold for cartilage and bone tissue engineering.     

Efficient synthesis of linear multifunctional poly(ethylene glycol) by copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition

Poly(ethylene glycol) (PEG) is a versatile biocompatible polymer. Improvement of its limited functionality (two chain termini) may significantly expand its current applications. In this communication, a simple and yet highly efficient strategy for the synthesis of linear multifunctional PEGs with "click" chemistry is reported. A short acetylene-terminated PEG was linked by 2,2-bis(azidomethyl)propane-1,3-diol using Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition in water at room temperature. High-molecular-weight PEGs with pendant hydroxyl groups were obtained and characterized by 1H NMR and size-exclusion chromatography. A prototype bone-targeting polymeric drug delivery system was also successfully synthesized based on this new method. It demonstrates strong biomineral-binding ability and the ease of incorporating therapeutic agents into the delivery system. This simple "click" reaction approach provides a useful tool for the development of novel functional polymers and their conjugates for biomedical applications.     

Unification of the copper(I) binding affinities of the metallo-chaperones Atx1, Atox1, and related proteins: detection probes and affinity standards

Literature estimates of metal-protein affinities are widely scattered for many systems, as highlighted by the class of metallo-chaperone proteins, which includes human Atox1. The discrepancies may be attributed to unreliable detection probes and/or inconsistent affinity standards. In this study, application of the four Cu(I) ligand probes bicinchoninate, bathocuproine disulfonate, dithiothreitol (Dtt), and glutathione (GSH) is reviewed, and their Cu(I) affinities are re-estimated and unified. Excess bicinchoninate or bathocuproine disulfonate reacts with Cu(I) to yield distinct 1:2 chromatophoric complexes [Cu(I)L(2)](3-) with formation constants β(2) = 10(17.2) and 10(19.8) m(-2), respectively. These constants do not depend on proton concentration for pH ≥7.0. Consequently, they are a pair of complementary and stable probes capable of detecting free Cu(+) concentrations from 10(-12) to 10(-19) m. Dtt binds Cu(I) with K(D) ～10(-15) m at pH 7, but it is air-sensitive, and its Cu(I) affinity varies with pH. The Cu(I) binding properties of Atox1 and related proteins (including the fifth and sixth domains at the N terminus of the Wilson protein ATP7B) were assessed with these probes. The results demonstrate the following: (i) their use permits the stoichiometry of high affinity Cu(I) binding and the individual quantitative affinities (K(D) values) to be determined reliably via noncompetitive and competitive reactions, respectively; (ii) the scattered literature values are unified by using reliable probes on a unified scale; and (iii) Atox1-type proteins bind Cu(I) with sub-femtomolar affinities, consistent with tight control of labile Cu(+) concentrations in living cells.     

Retarding effects of cyclodextrins on the decomposition of organic isothiocyanates in an aqueous solution

One- and two-dimensional (1)H nuclear magnetic resonance ((1)H NMR) spectra were measured in order to estimate the dissociation constants (K(diss)) and molecular geometries of cyclodextrin (CD) with three organic isothiocyanates (ITC), allyl-ITC, 3-butenyl-ITC, and 4-pentenyl-ITC, in an aqueous solution (pH 5.0, I(c)=0.75 M). In every ITC, the K(diss) values decreased in the order of alpha-CD>beta-CD>gamma-CD, and the three rod-like linear molecules of ITCs were accommodated with the best fit into the smallest cavity of alpha-CD. By rotating-frame nuclear Overhauser enhancement spectroscopy, cross peaks were found between the H-3 of alpha-CD and the H-1 of AITC. From the result, the molecular geometry of alpha-CD-AITC complex presume that the isothiocyanate group of AITC is located some where around the widening rim and a hydrophobic allyl group is included within the hydrophobic cavity of alpha-CD.     

Direct diazo-transfer reaction on beta-lactam: synthesis and preliminary biological activities of 6-triazolylpenicillanic acids

In this study we report the first example of a direct diazo-transfer reaction on readily available 6-aminopenicillanates to give 6-azidopenicillanates in high yield. Subsequent Cu(I)-catalyzed Huisgen cycloaddition between these 6-azidopenicillanates and assorted terminal alkynes facilely furnished 6-triazolylpenicillanic acids. Preliminary biological screening indicates that these triazolylpenicillanic acids possess low to moderate antibacterial activities.     

Fractionation of immunoglobulins by liquid-liquid partition chromatography in aqueous two-phase systems

In this paper we show that although immunoglobulins are easily precipitated in solutions containing polyethylene glycol (PEG), especially at pH's where the conformation of the proteins should be close to native, human and rabbit IgG can be solubilized in aqueous dextran/PEG two-phase systems containing glycine and sodium chloride at pH 7.0 and that human IgA and IgM can be solubilized in such systems if the pH is increased to 9.0. Liquid-liquid partition chromatography (LLPC) on Li-ParGel was used to separate immunoglobulins into subfractions. Human IgG, IgM, and IgA all gave three peaks in the system used. These results indicate the possibility of separating different classes of immunoglobulins with this method. Specific IgG antibodies isolated from a rabbit antiserum against human serum proteins gave only two peaks in the LLPC system while the total IgG population gave three, as did human IgG. Thus, partitioning of immunoglobulins seems to be related to antibody activity.     

Bacillus macerans cyclomaltodextrin glucanotransferase transglycosylation reactions with different molar ratios of D-glucose and cyclomaltohexaose

It was found that Bacillus macerans cyclomaltodextrin glucanotransferase (CGTase) reacts with cyclomaltohexaose (alpha-cyclodextrin, alpha-CD) to give a series of cyclomaltooligosaccharides (cyclomaltodextrins, CDs), having seven to more than 20 D-glucose residues and maltooligosaccharides (maltodextrins, MDs) from G5 to G12+. When D-glucose (Glc) was added to the alpha-CD at very low molar ratios (1:100) of Glc to alpha-CD, the predominant products (95%) were CDs, some of which were macrocyclic MDs with 20-60 D-glucose residues, along with MDs that also had high molecular weights, containing 10-75 D-glucose residues and gave a blue iodine-iodide color. As the molar ratio of Glc to alpha-CD was increased, the amount of CDs progressively decreased and MDs proportionately increased in the range of G2-G12. At 25 mM alpha-CD and Glc to alpha-CD molar ratio of 1:1, a 75% yield of MDs, G1-G12, each in approximately equal amounts, was obtained; and at 20 mM and a 5:1 ratio, a 97% yield of MDs, G2-G9, was obtained but in unequal amounts. At higher ratios (10:1), the CDs completely disappeared, and at very high ratios (50:1 to 100:1) only low-molecular-weight MDs, G2-G4, were formed.     

General method for labeling siRNA by click chemistry with fluorine-18 for the purpose of PET imaging

The alkyne-azide Cu(I)-catalyzed Huisgen cycloaddition, a click-type reaction, was used to label a double-stranded oligonucleotide (siRNA) with fluorine-18. An alkyne solid support CPG for the preparation of monostranded oligonucleotides functionalized with alkyne has been developed. Two complementary azide labeling agents (1-(azidomethyl)-4-[(18)F]fluorobenzene) and 1-azido-4-(3-[(18)F]fluoropropoxy)benzene have been produced with 41% and 35% radiochemical yields (decay-corrected), respectively. After annealing with the complementary strand, the siRNA was directly labeled by click chemistry with [(18)F]fluoroazide to produce the [(18)F]-radiolabeled siRNA with excellent radiochemical yield and purity.     

Synthesis of 2-alkoxy-8-hydroxyadenylpeptides: towards synthetic epitope-based vaccines

The preparation of three different 2-alkoxy-8-hydroxyadenylpeptide conjugates has been accomplished by solid-phase synthesis combined with 'on-resin' Cu(I) catalyzed Huisgen cycloaddition. The immunogenicity of the compounds has been evaluated in IL-12 production and antigen presentation assays.     

Click chemistry for (18)F-labeling of RGD peptides and microPET imaging of tumor integrin alphavbeta3 expression

The cell adhesion molecule integrin alpha vbeta 3 plays a key role in tumor angiogenesis and metastasis. A series of (18)F-labeled RGD peptides have been developed for PET of integrin expression based on primary amine reactive prosthetic groups. In this study, we report the use of the Cu(I)-catalyzed Huisgen cycloaddition, also known as a click reaction, to label RGD peptides with (18)F by forming 1,2,3-triazoles. Nucleophilic fluorination of a toluenesulfonic alkyne provided (18)F-alkyne in high yield (nondecay-corrected yield: 65.0 +/- 1.9%, starting from the azeotropically dried (18)F-fluoride), which was then reacted with an RGD azide (nondecay-corrected yield: 52.0 +/- 8.3% within 45 min including HPLC purification). The (18)F-labeled peptide was subjected to microPET studies in murine xenograft models. Murine microPET experiments showed good tumor uptake (2.1 +/- 0.4%ID/g at 1 h postinjection (p.i.)) with rapid renal and hepatic clearance of (18)F-fluoro-PEG-triazoles-RGD 2 ( (18)F-FPTA-RGD2) in a subcutaneous U87MG glioblastoma xenograft model (kidney 2.7 +/- 0.8%ID/g; liver 1.9 +/- 0.4%ID/g at 1 h p.i.). Metabolic stability of the newly synthesized tracer was also analyzed (intact tracer ranging from 75% to 99% at 1 h p.i.). In brief, the new tracer (18)F-FPTA-RGD2 was synthesized with high radiochemical yield and high specific activity. This tracer exhibited good tumor-targeting efficacy and relatively good metabolic stability, as well as favorable in vivo pharmacokinetics. This new (18)F labeling method based on click reaction may also be useful for radiolabeling of other biomolecules with azide groups in high yield.     

Spectral, kinetic, and thermodynamic properties of Cu(I) and Cu(II) binding by methanobactin from Methylosinus trichosporium OB3b

To examine the potential role of methanobactin (mb) as the extracellular component of a copper acquisition system in Methylosinus trichosporium OB3b, the metal binding properties of mb were examined. Spectral (UV-visible, fluorescence, and circular dichroism), kinetic, and thermodynamic data suggested copper coordination changes at different Cu(II):mb ratios. Mb appeared to initially bind Cu(II) as a homodimer with a comparatively high copper affinity at Cu(II):mb ratios below 0.2, with a binding constant (K) greater than that of EDTA (log K = 18.8) and an approximate DeltaG degrees of -47 kcal/mol. At Cu(II):mb ratios between 0.2 and 0.45, the K dropped to (2.6 +/- 0.46) x 10(8) with a DeltaG degrees of -11.46 kcal/mol followed by another K of (1.40 +/- 0.21) x 10(6) and a DeltaG degrees of -8.38 kcal/mol at Cu(II):mb ratios of 0.45-0.85. The kinetic and spectral changes also suggested Cu(II) was initially coordinated to the 4-thiocarbonyl-5-hydroxy imidazolate (THI) and possibly Tyr, followed by reduction to Cu(I), and then coordination of Cu(I) to 4-hydroxy-5-thiocarbonyl imidazolate (HTI) resulting in the final coordination of Cu(I) by THI and HTI. The rate constant (k(obsI)) of binding of Cu(II) to THI exceeded that of the stopped flow apparatus that was used, i.e., >640 s(-)(1), whereas the coordination of copper to HTI showed a 6-8 ms lag time followed by a k(obsII) of 121 +/- 9 s(-)(1). Mb also solubilized and bound Cu(I) with a k(obsI) to THI of >640 s(-)(1), but with a slower rate constant to HTI (k(obsII) = 8.27 +/- 0.16 s(-)(1)), and appeared to initially bind Cu(I) as a monomer.     

Heavy metals alter the electrokinetic properties of bacteria, yeasts, and clay minerals.

The electrokinetic patterns of four bacterial species (Bacillus subtilis, Bacillus megaterium, Pseudomonas aeruginosa, and Agrobacterium radiobacter), two yeasts (Saccharomyces cerevisiae and Candida albicans), and two clay minerals (montmorillonite and kaolinite) in the presence of the chloride salts of the heavy metals, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, and of Na and Mg were determined by microelectrophoresis. The cells and kaolinite were net negatively charged at pH values above their isoelectric points (pI) in the presence of Na, Mg, Hg, and Pb at an ionic strength (mu) of 3 x 10(-4); montmorillonite has no pI and was net negatively charged at all pH values in the presence of these metals. However, the charge of some bacteria, S. cerevisiae, and kaolinite changed to a net positive charge (charge reversal) in the presence of Cd, Cr, Cu, Ni, and Zn at pH values above 5.0 (the pH at which charge reversal occurred differed with the metal) and then, at higher pH values, again became negative. The charge of the bacteria and S. cerevisiae also reversed in solutions of Cu and Ni with a mu of greater than 3 x 10(-4), whereas there was no reversal in solutions with a mu of less than 3 x 10(-4). The clays became net positively charged when the mu of Cu was greater than 3 x 10(-4) and that of Ni was greater than 1.5 x 10(-4). The charge of the cells and clays also reversed in solutions containing both Mg and Ni or both Cu and Ni (except montmorillonite) but not in solutions containing both Mg and Cu (except kaolinite) (mu = 3 x 10(-4)). The pIs of the cells in the presence of the heavy metals were at either higher or lower pH values than in the presence of Na and Mg. Exposure of the cells to the various metals at pH values from 2 to 9 for the short times (ca. 10 min) required to measure the electrophoretic mobility did not affect their viability. The specific adsorption on the cells and clays of the hydrolyzed species of some of the heavy metals that formed at higher pH values was probably responsible for the charge reversal. These results suggest that the toxicity of some heavy metals to microorganisms varies with pH because the hydrolyzed speciation forms of these metals, which occur at higher pH values, bind on the cell surface and alter the net charge of the cell.(ABSTRACT TRUNCATED AT 400 WORDS)     

Heavy metals alter the electrokinetic properties of bacteria, yeasts, and clay minerals.

The electrokinetic patterns of four bacterial species (Bacillus subtilis, Bacillus megaterium, Pseudomonas aeruginosa, and Agrobacterium radiobacter), two yeasts (Saccharomyces cerevisiae and Candida albicans), and two clay minerals (montmorillonite and kaolinite) in the presence of the chloride salts of the heavy metals, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, and of Na and Mg were determined by microelectrophoresis. The cells and kaolinite were net negatively charged at pH values above their isoelectric points (pI) in the presence of Na, Mg, Hg, and Pb at an ionic strength (mu) of 3 x 10(-4); montmorillonite has no pI and was net negatively charged at all pH values in the presence of these metals. However, the charge of some bacteria, S. cerevisiae, and kaolinite changed to a net positive charge (charge reversal) in the presence of Cd, Cr, Cu, Ni, and Zn at pH values above 5.0 (the pH at which charge reversal occurred differed with the metal) and then, at higher pH values, again became negative. The charge of the bacteria and S. cerevisiae also reversed in solutions of Cu and Ni with a mu of greater than 3 x 10(-4), whereas there was no reversal in solutions with a mu of less than 3 x 10(-4). The clays became net positively charged when the mu of Cu was greater than 3 x 10(-4) and that of Ni was greater than 1.5 x 10(-4). The charge of the cells and clays also reversed in solutions containing both Mg and Ni or both Cu and Ni (except montmorillonite) but not in solutions containing both Mg and Cu (except kaolinite) (mu = 3 x 10(-4)). The pIs of the cells in the presence of the heavy metals were at either higher or lower pH values than in the presence of Na and Mg. Exposure of the cells to the various metals at pH values from 2 to 9 for the short times (ca. 10 min) required to measure the electrophoretic mobility did not affect their viability. The specific adsorption on the cells and clays of the hydrolyzed species of some of the heavy metals that formed at higher pH values was probably responsible for the charge reversal. These results suggest that the toxicity of some heavy metals to microorganisms varies with pH because the hydrolyzed speciation forms of these metals, which occur at higher pH values, bind on the cell surface and alter the net charge of the cell.(ABSTRACT TRUNCATED AT 400 WORDS)     

Two independent ways of preparing hypercharged hydrolyzable polyaminorotaxane

The aim of this work is to synthesize new PEO-based polyrotaxanes from modified cyclodextrins. Two strategies are discussed and compared. In the first, a pseudopolyrotaxane was formed between alpha,omega- PEO dimethacrylate and alpha-cyclodextrin. A coupling reaction between 1-pyrenebutyric acid N-hydroxysuccinimide ester was carried out to block the cyclic molecules onto the PEO. Cyclodextrins of the supramolecular assemblies were then oxidized using sodium periodate and reacted with spermine to form a potentially highly charged polyrotaxane. In the second strategy, cyclodextrins were first modified, and used to form the polyrotaxane through the pseudopolyrotaxane synthesis followed by the blocking reaction. Acidic titration allowed quantifying the number of amine functions borne by the supramolecular assemblies through two variables: the number of rings per polymer chain and the number of spermine groups per cyclic molecule. The supramolecules obtained by both strategies are discussed.     

Utilization of meat industry by products: protein hydrolysate from sheep visceral mass

Protein hydrolysate was prepared from pre-treated sheep visceral mass (including stomach, large and small intestines) by enzymatic treatment at 43+/-1 degrees C (at the in situ pH 7.1+/-0.2 of the visceral mass) using fungal protease. The enzyme readily solubilized the proteins of the visceral mass as indicated by the degree of hydrolysis (34%) and nitrogen recovery (>64%). Hydrolysis with an enzyme level of 1% (w/w of total solids) at 43+/-1 degrees C with a pH around 7.0 for 45 min was found to be the optimum condition. The yield of protein hydrolysate was about 6% (w/w). The amino acid composition of the protein hydrolysate that was very hygroscopic, was comparable to that of casein.     

Reevaluation of the "glycolytic complex" in muscle: a multitechnique approach using trout white muscle

Preliminary characterization of the "glycolytic complex," formed in trout white muscle, revealed that phosphofructokinase (PFK) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) are bound to particulate matter largely by ionic interactions; increasing neutral salt or charged metabolite concentrations released bound PFK and GAPDH. GAPDH was consistently solubilized at lower salt concentrations, indicating that it is not bound as tightly as PFK, but both enzymes were readily solubilized at physiological concentrations of salts and metabolites. pH titrations indicated that PFK binding is dependent on group(s) with a pKa of 7.3 in 30 mM imidazole. PFK binding increased at lower pH values; at 150 mM KCl the apparent pKa value is 6.5. Experiments with polyethylene glycol 8000 (PEG), which is used to mimic the high in vivo protein concentrations under in vitro conditions, showed that the binding of PFK and GAPDH increased with increasing PEG concentrations. Interestingly, at 5% PEG, only the PFK binding response depended on the ionic composition of the medium--with increased binding occurring at the pH of the exhausted muscle and decreased binding at control pH values. These results suggested that only PFK reversibly bound to cellular structures in response to changing conditions and disagrees with previous studies showing binding of several glycolytic enzymes as measured using the dilution method (F. M. Clarke, F.D. Shaw, and D.J. Morton (1980) Biochem. J. 186, 105-109). In order to determine whether artifactual binding was measured by the dilution method, two new methodologies were employed to measure enzyme binding in vivo: (a) whole muscle slices were pressed to quickly extrude cellular juice, and (b) muscle strips were finely minced and centrifuged to liberate cytoplasmic contents. Both methods indicated that, under physiological conditions, up to 70% of the total cellular phosphofructokinase may be bound, but other glycolytic enzymes are bound to a lesser extent (10-30%). This result contrasts those obtained with the dilution method, and suggests that dilution of cellular contents may result in an overestimation of the percentage of enzyme associated with cellular structures; this is dramatically shown for glyceraldehyde-3-phosphate dehydrogenase. The viability of the glycolytic complex in trout white muscle is discussed in light of the decreased binding measured using these new methodologies.