A study of the distribution of chitosan onto and within a paper sheet using a fluorescent chitosan derivative

Acidic glutaraldehyde (Gh) crosslinked chitosan (ChGhH) when deprotonated the biopolymer (ChGh) presents high content of free amino groups. These modified biopolymers are comparable to epichlorohydrin (Ep) crosslinked (ChEp). C/N molar ratio of 6.1 for chitosan increases to 7.3, 7.5 and 7.1 for ChGhH, ChGh and ChEp. The effectiveness of the carbon-6 hydroxyl group in interconnecting chitosan units was supported by IR and ¹³CNMR, where Ep promotes increase in crystallinity. Copper uptake gave the order Ch > ChGh > ChGhH > ChEp, as: 1.35 ± 0.06, 1.30 ± 0.05, 1.05 ± 0.07 and 0.96 ± 0.22 mmol g⁻¹, reflecting the availability of nitrogen basic centers in adsorbing. The favorable thermodynamic data of adsorption through calorimetric titration gave exothermic enthalpic values: −28.98 ± 0.05, −6.68 ± 0.04, −6.13 ± 0.07 and −0.65 ± 0.23 kJ mol⁻¹ for Ch, ChGh, ChGhH and ChEp. Free Gibbs energy reflected spontaneity of interactions and, with the exception of chitosan, the entropic values are positive.     

Sorption behavior of Co and Eu radionuclides onto chitosan derivatives

Chitosan benzoyl thiourea derivative has been synthesized and used successfully for the removal of the hazardous ⁶⁰Co and ^152+154Eu radionuclides from aqueous solutions. Different parameters were applied for studying the adsorbitivity of these radionuclides, including change in pH, time, ion concentration, and equilibrium concentration. Freundlich and Langmuir isotherms were applied successfully to fit the experimental data. Two more isotherm models, Lagergren and Morris–Webber, have been applied. All the parameters and the constants calculated for the kinetic isotherms and models are evaluated and listed. A mechanism for the complex formation of Co⁺² with the chitosan derivative has been suggested.     

Preparation and metal-binding behaviour of chitosan functionalized by ester- and amino-terminated hyperbranched polyamidoamine polymers

A series of insoluble chitosan (CTS) derivatives were prepared by grafting ester- and amino-terminated dendrimer-like polyamidoamine (PAMAM) into CTS using a divergent method by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups, and (2) amidation of the resulting esters with ethylenediamine (EDA). Their structures were characterized by infrared spectra (IR) and wide-angle X-ray diffraction (WAXD). The adsorption capabilities of the products for Au(3+), Pd(2+), Pt(4+), Ag(+), Cu(2+), Zn(2+), Hg(2+), Ni(2+), and Cd(2+) were studied. The results showed that the products exhibited better adsorption capabilities for Au(3+) and Hg(2+) than for other metal ions, and the adsorption capabilities of amino-terminated products were higher than those of ester-terminated ones. Also it was observed that a high percentage of grafting of PAMAM into CTS does not ensure a high adsorption capacity.     

Adsorption of mutagens to chlorophyllin–chitosan, an insoluble form of chlorophyllin

Chlorophyllin, a water soluble derivative of chlorophyll, is known to suppress the mutagenic and carcinogenic actions of compounds having polycyclic structures, e.g. heterocyclic amines and aflatoxin B₁. There is evidence that this suppressing effect arises, at least in part, by a complex formation between the porphyrin-like structure of chlorophyllin and the planar molecular surfaces of these compounds. We report here that chlorophyllin can form an insoluble salt-like material when mixed with chitosan, a polyglucosamine, and that the solid chlorophyllin–chitosan thus prepared can efficiently trap polycyclic mutagenic compounds. The adsorbed polycyclic mutagens were elutable with buffers of acidic pH, but only to small extents. Chlorophyllin–chitosan may be expected to be useful as an intercepting agent against polycyclic mutagens and carcinogens.     

Congo red adsorption from aqueous solutions by using chitosan hydrogel beads impregnated with nonionic or anionic surfactant

The adsorption performance of CS beads impregnated with triton X-100 (TX-100) as a nonionic surfactant and sodium dodecyl sulfate (SDS) as an anionic surfactant was investigated for the removal of anionic dye (congo red) from aqueous solution. While the adsorption capacity of CS/TX-100 beads was enhanced at all concentrations of TX-100 (0.005–0.1%), the increase in the concentration of SDS above 0.01% in the CS/SDS beads gradually reduced the adsorption capacity of the beads. Equilibrium adsorption isotherm data indicated a good fit to the Sips isotherm model and a heterogeneous adsorption process. The Sips maximum adsorption capacity in dry weight of the CS/TX-100 beads was 378.79 mg/g and 318.47 mg/g for the CS/SDS beads, higher than the 223.25 mg/g of the CS beads. Modification of CS beads by impregnation with nonionic surfactant, or even anionic surfactant, at low concentrations is a possible way to enhance adsorption of anionic dye.     

Polyelectrolyte complex formation using alginate and chitosan

Polyelectrolyte complexes (PECs) of alginate and chitosan were formed by addition of 0.1% alginate solution (pH 6.5) to 0.1% chitosan solution (pH 4.0), and by adding the chitosan solution to the alginate solution under high shearing conditions. Variations in the properties of the polymers and the preparation procedure were studied, and the resultant PEC size, zeta potential (Zp), and pH were determined using dynamic light scattering (DLS), electrophoresis and by measuring turbidity and pH. Tapping mode atomic force microscopy (AFM) was used to examine some of the complexes. The particle size was decreased as the speed and diameter of the dispersing element of the homogenizer was increased. The net charge ratio between chitosan and alginate, and the molecular weights (M_W) of both the alginate and chitosan samples were the most significant parameters that influenced the particle size, Zp, and pH. The mixing order also influenced the size of the PECs, however, the Zp and pH were not affected by the mixing order. The stability of the complexes was investigated by incubation at an elevated temperature (37 °C), storage for one month at 4 °C, alteration of the pH of the PEC mixture, and addition of salt to physiological ionic strength (0.15 M NaCl). The properties of the PEC could be affected according to the molecular properties of the polyelectrolytes selected and the preparation procedures used. The resultant PEC sizes and properties of the complex were rationalised using a core-shell model for the structure of the complexes.     

Adsorption of Cr(VI) and As(V) ions by modified magnetic chitosan chelating resin

Cross-linked magnetic chitosan anthranilic acid glutaraldehyde Schiff's base (CAGS) was prepared for adsorption of both As(V) and Cr(VI) ions and their determination by ICP-OES. Prepared cross-linked magnetic CAGS was investigated by means of SEM, FTIR, wide angle X-ray diffraction (WAXRD) and TGA analysis. The adsorption properties of cross-linked magnetic CAGS resin toward both As(V) and Cr(VI) were evaluated. Various factors affecting the uptake behavior such as pH, temperature, contact time, initial concentration of metal ions, effect of other ions and desorption were studied. The equilibrium was achieved after about 110 min and 120 min for As(V) and Cr(VI), respectively at pH = 2. The adsorption kinetics followed the mechanism of the pseudo-second order equation for all systems studied, evidencing chemical sorption as the rate-limiting step of adsorption mechanism and not involving a mass transfer in solution. The equilibrium data were analyzed using the Langmuir, Freundlich, and Tempkin isotherm models. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the maximum adsorption capacities were 58.48 and 62.42 mg/g for both Cr(VI) and As(V), respectively. Cross-linked magnetic CAGS displayed higher adsorption capacity for Cr(VI). The adsorption capacity of the metal ions increased with increasing temperature under optimum conditions in case of Cr(VI), but decreased in case of As(V). The metal ion-loaded cross-linked magnetic CAGS were regenerated with an efficiency of greater than 88% using 0.2 M sodium hydroxide (NaOH).     

Equilibrium and kinetic analysis of methyl orange sorption on chitosan spheres

Chitosan can be used as adsorbent in the treatment of effluents from the textile industry, especially for negatively charged dyes, due to its cationic polyelectrolyte nature. In this work, the sorption of a model dye, methyl orange, on chitosan hydrobeads is analyzed in terms of equilibrium and kinetic approaches. Equilibrium studies showed that dye adsorption had a mixed Freundlich-Langmuir behavior that had its Langmuir character increased as the pH was increased. In terms of adsorption kinetics, it was found to be of nth-pseudo-order, with fractional n increasing from approximately 2 to approximately 2.5 as pH and initial dye concentration in the continuous phase were increased. The increase in the apparent pseudo-order was related to changes in mathematical approximation for the solution of the sorption rate equation, which were the result of the decrease in the ratio (number of active sites for adsorption)/(number of adsorbate molecules).     

Enhanced adsorption of congo red from aqueous solutions by chitosan hydrogel beads impregnated with cetyl trimethyl ammonium bromide

The adsorption of congo red (CR) onto chitosan (CS) beads impregnated by a cationic surfactant (CTAB, cetyl trimethyl ammonium bromide) was investigated. Chitosan beads impregnated at a ratio of 1/20 of CTAB to CS (0.05% of CTAB and 1% of CS) increased the CR adsorption capacity by 2.2 times from 162.3 mg/g (0% CTAB) to 352.5 mg/g (0.05% CTAB). The CR adsorption decreased with an increase in pH of the CR solution from 4.0 to 9.0. The Sips isotherm model showed a good fit with the equilibrium experimental data and the values of the heterogeneity factor (n) indicated heterogeneous adsorption of CR onto CS/CTAB beads, as well as CS beads. The kinetic data showed better fit to the pseudo second-order rate model than to the pseudo first-order rate model. The impregnation of CS beads by cationic surfactants showed the highest adsorption capacities of CR compared to any other adsorbents and would be a good method to increase adsorption efficiency for the removal of anionic dyes in a wastewater treatment process.     

Characteristics of molybdate-impregnated chitosan beads (MICB) in terms of arsenic removal from water and the application of a MICB-packed column to remove arsenic from wastewater

The removal of arsenic (As) species, such as As(III) and As(V), from water by molybdate-impregnated chitosan beads (MICB) in both batch and continuous operations was studied. The effects of pH, temperature, coexisting ions, and arsenic concentrations were studied in batch tests. Studies on the kinetic adsorption of MICB, the recovery of arsenic by the desorption solution, and the reuse of MICB were also carried out. The practicality and efficiency of an MCIB-packed column on arsenic removal were evaluated in a continuous system on industrial arsenic-containing wastewater discharged during the manufacture of GaAs supports. The results indicate that MICB favor the adsorption of both As(V) and As(III). The optimal pH value for As(III) and As(V) removal was 5. The adsorption of arsenic on the MICB is most likely an exothermic reaction. The effect of coexisting ions was varied and depended on their concentrations and species. The optimal desorption solution for arsenic recovery was 1M H2SO4, which resulted in a 95% efficiency for As(III) and 99% for As(V). In the continuous tests, the MICB-packed column exhibited excellent arsenic removal from wastewater without any pretreatment. These results provide strong evidence of the potential of MICB for removing As from industrial wastewaters.     

A new chitosan biopolymer derivative as metal-complexing agent: synthesis, characterization, and metal(II) ion adsorption studies

In this study, a new chitosan biopolymer derivative (CTSL) has been synthesized by anchoring a new vanillin-based complexing agent or ligand, namely 4-hydroxy-3-methoxy-5-[(4-methylpiperazin-1-yl)methyl] benzaldehyde, (L) with chitosan (CTS) by means of condensation. The new material was characterized by elemental (CHN), spectral (FTIR and solid state ¹³C NMR), thermal (TG-DTA and DSC), structural (powder XRD), and morphological (SEM) analyses. The CTSL was employed to study the equilibrium adsorption of various metal ions, namely, Mn(II), Fe(II), Co(II), Cu(II), Ni(II), Cd(II), and Pb(II), as functions of pH of the solutions. Its kinetics of adsorption was evaluated utilizing the pseudo first order and pseudo second order equation models and the equilibrium data were analyzed by Langmuir isotherm model. The CTSL shows good adsorption capacity for metal ions studied in the order Cu(II) > Ni(II) > Cd(II) ? Co ? Mn(II) > Fe(II) > Pb(II) in all studied pH ranges due to the presence of many coordinating moieties present in it.     

Kinetics of adsorption of Zn(II) ion on chitosan derivatives

The adsorption of Zn(II) ions from aqueous solution by chitosan derivatives (KCTS and HKCTS) was studied in a batch adsorption system. The adsorption capacities and rates of Zn(II) ions onto chitosan derivatives were evaluated. The adsorption isothermal data could be well interpreted by the Langmuir and Freundlich models. The kinetic experimental data properly correlated with the second-order kinetic model, which indicates that the chemical adsorption is the rate-limiting step. The apparent adsorption activation energy were 25.47 kJ mol⁻ and 5.473 kJ mol⁻, respectively, and the second-order adsorption constant for KCTS and HKCTS were 0.00311 g (mg min)⁻¹ and 0.005 g (mg min)⁻¹, respectively.     

别嘌醇对高尿酸血症大鼠血清脂联素的影响

目的观察高尿酸血症大鼠血清脂联素的改变,探讨别嘌醇对高尿酸血症大鼠血清脂联素的影响及意义。方法 36只雄性SD大鼠随机分为3组。使用高酵母膏饲料联合氧嗪酸钾混悬液腹腔注射6周诱导大鼠高尿酸血症模型。别嘌醇治疗组除给予造模剂外同时给予别嘌醇灌胃。6周后处死大鼠,检测血清尿酸、脂联素、一氧化氮,免疫组化法检测大鼠主动脉内膜层eNOS的表达量。结果与正常对照组相比模型组大鼠血尿酸显著升高[(216.0±6.2)vs(45.1±5.6),P<0.05],血清脂联素、一氧化氮及主动内膜层内皮型一氧化氮合酶表达量显著降低[(52.6±7.9)vs(63.6±9.2),(17.2±3.3)vs(24.1±2.0),(38.3±4.5)vs(48.3±4.2),P<0.05]。别嘌醇治疗组血尿酸降低[(44.8±4.3)vs(216.0±6.2),P<0.05],血清脂联素和一氧化氮水平升高[(159.6±9.2)vs(52.6±7.9),(22.1±2.2)vs(17.2±3.3),P<0.05],主动脉内膜内皮型一氧化氮合酶蛋白表达增加[(46.1±4.2)vs(38.3±4.5),P<0.05]。脂联素与一氧化氮呈正相关(r=0.057),与血尿酸呈负相关(r=-0.48)。结论别嘌醇处理可一定程度逆转高尿酸血症可诱导的大鼠血清脂联素的降低,别嘌醇可能是上调内皮型一氧化氮合酶的激动剂。     

Magnetic chitosan composite particles: Evaluation of thorium and uranyl ion adsorption from aqueous solutions

Magnetic chitosan composite particles with 40 μm average size and 24 emu/g saturation magnetization obtained by an in situ procedure were evaluated as a new low-cost adsorbent for radioactive wastewater decontamination. Sorbent characterization by SEM, EDX, FTIR and magnetization measurements proved that the target ions were bound and their surface distribution was uniform. The 18 emu/g magnetization of the metal loaded particles was high enough to ensure their easy magnetic field separation and recovery. The parameters influencing the sorption process were optimized with respect to sorbent mass, target ion concentration and contact time. The material under study had superior adsorption capacity both for uranyl (666.67 mg/g) and thorium (312.50 mg/g) ions when compared to other low-cost adsorbents reported in literature. The adsorption process is spontaneous and endothermic. The material may be regenerated and re-used.     

Molecular and crystal structures of chitosan/HI type I salt determined by X-ray fiber diffraction

The three-dimensional structure of chitosan/HI type I salt was determined by the X-ray fiber diffraction technique and linked-atom least-squares refinement method. Two polymer chains and four iodide ions (I(-)) crystallized in a monoclinic unit cell with dimensions a = 9.46(2), b = 9.79(2)], c (fiber axis)=10.33(2)A, beta = 105.2(2) degrees and a space group P2(1). Chitosan chains adopted an extended twofold helical conformation that was stabilized by O-3...O-5 hydrogen bonds, and the O-6 atom adopted nearly gt orientation. Polymer chains zigzag along the b-axis and directly connect to each other by N-2...O-6 hydrogen bonds. Two columns of iodide ions were shown to pack at the bending points of the zigzag sheets, and their locations are closely related to those of water columns in the hydrated chitosan. The iodide ions stabilized the salt structure by forming hydrogen bonds with the N-2 and O-6 atoms of the polymer chains together with an electrostatic interaction between N-2 and the iodide ions.     

Cross-linked succinyl chitosan as an adsorbent for the removal of Methylene Blue from aqueous solution

Removal of a basic dye (Methylene Blue) from aqueous solution was investigated using a cross-linked succinyl-chitosan (SCCS) as sorbent. The chemical structures of chitosan and its derivatives were testified by FT-IR. X-ray diffraction, DTG analysis and swelling measurements were conducted to clarify the characteristics of the chemically modified chitosan. The effect of process parameters, such as pH of the initial solution, and concentrations of dyes on the extent of Methylene Blue (MB) adsorption was investigated. The Langmuir isotherm model was used to fit the equilibrium experimental data, giving a maximum sorption capacity of 289.02 mg/g at 298 K. Kinetic studies showed that the kinetic data were well described by the pseudo-second-order kinetic model. Thermodynamic parameters such as enthalpy change (ΔH°), free energy change (ΔG°) and entropy change (ΔS°) were determined to be −25.32 kJ mol⁻¹, −6.76 kJ mol⁻¹ and −62.36 J mol⁻¹ K⁻¹, respectively, which leads to a conclusion that the adsorption process is spontaneous and exothermic.     

Physicochemical and structural characteristics of chitosan nanopowders prepared by ultrafine milling

Two different molecular weights of chitosan were pulverized to nanopowders by ultrafine milling. The nanopowders were characterized by viscometry small angle X-ray scattering (SAXS), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), FT-IR spectroscopy and UV-vis spectroscopy. Our results showed that ultrafine milling effectively reduced the particle size of chitosan to a nanoscale. The viscosity average molecular weight (Mv) of chitosan was decreased by the milling treatment. The crystalline structure of chitosan was destroyed by the milling since the nanopowder exhibited an amorphous XRD pattern. In addition, thermal stability of the low molecular weight chitosan was decreased after the milling treatment. FT-IR and UV-vis spectra showed that the milling process did not cause significant changes in the chemical structure of chitosan.     

Antioxidant protection of human serum albumin by chitosan

Inhibition of protein oxidation by reactive oxygen species (ROS) would confer benefit to living organisms exposed to oxidative stress, because oxidized proteins are associated with many diseases and can propagate ROS-induced damage. We measured the ability of 2800Da chitosan, D-glucosamine and N-acetyl glucosamine to protect human serum albumin from oxidation by peroxyl radicals derived from 2,2'-azobis(2-amidinopropane)dihydrochloride and N-centered radicals from 1,1'-diphenyl-2-picrylhydrazyl and from 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid). Comparison with the antioxidant action of vitamin C showed that, on a molar basis, chitosan was equally effective in preventing formation of carbonyl and hydroperoxide groups in human serum albumin exposed to peroxyl radicals. It was also a potent inhibitor of conformational changes in the protein, assessed by absorption spectrum and intrinsic fluorescence. D-glucosamine was much less effective and N-acetyl glucosamine was not a useful antioxidant. Protection of the albumin from peroxyl radicals was achieved by scavenging of peroxyl radical. Chitosan was also a good scavenger of N-centered radicals, with glucosamine and N-acetyl glucosamine much less effective. The results suggest that administration of low molecular weight chitosans may inhibit neutrophil activation and oxidation of serum albumin commonly observed in patients undergoing hemodialysis, resulting in reduction of oxidative stress associated with uremia.