Efficiency improvement of an antibody production process by increasing the inoculum density

Increasing economic pressure is the main driving force to enhance the efficiency of existing processes. We developed a perfusion strategy for a seed train reactor to generate a higher inoculum density for a subsequent fed batch production culture. A higher inoculum density can reduce culture duration without compromising product titers. Hence, a better capacity utilization can be achieved. The perfusion strategy was planned to be implemented in an existing large scale antibody production process. Therefore, facility and process constraints had to be considered. This article describes the initial development steps. Using a proprietary medium and a Chinese hamster ovary cell line expressing an IgG antibody, four different cell retention devices were compared in regard to retention efficiency and reliability. Two devices were selected for further process refinement, a centrifuge and an inclined gravitational settler. A concentrated feed medium was developed to meet facility constraints regarding maximum accumulated perfundate volume. A 2‐day batch phase followed by 5 days of perfusion resulted in cell densities of 1.6 × 10¹⁰ cells L^?1, a 3.5 fold increase compared to batch cultivations. Two reactor volumes of concentrated feed medium were needed to achieve this goal. Eleven cultivations were carried out in bench and 50 L reactors showing acceptable reproducibility and ease of scale up. In addition, it was shown that at least three perfusion phases can be combined within a repeated perfusion strategy. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:607–615, 2014     

Bioreactor productivity and media cost comparison for different intensified cell culture processes

Process intensification in biomanufacturing has attracted a great deal of interest in recent years. Manufacturing platform improvements leading to higher cell density and bioreactor productivity have been pursued. Here we evaluated a variety of intensified mammalian cell culture processes for producing monoclonal antibodies. Cell culture operational modes including fed‐batch (normal seeding density or high seeding density with N‐1 perfusion), perfusion, and concentrated fed‐batch (CFB) were assessed using the same media set with the same Chinese Hamster Ovary (CHO) cell line. Limited media modification was done to quickly fit the media set to different operational modes. Perfusion and CFB processes were developed using an alternating tangential flow filtration device. Independent of the operational modes, comparable cell specific productivity (fed‐batch: 29.4 pg/cell/day; fed‐batch with N‐1 perfusion: 32.0 pg/cell/day; perfusion: 31.0 pg/cell/day; CFB: 20.1 – 45.1 pg/cell/day) was reached with similar media conditions. Continuous media exchange enabled much higher bioreactor productivity in the perfusion (up to 2.29 g/L/day) and CFB processes (up to 2.04 g/L/day), compared with that in the fed‐batch processes (ranging from 0.39 to 0.49 g/L/day), largely due to the higher cell density maintained. Furthermore, media cost per gram of antibody produced from perfusion was found to be highly comparable with that from fed‐batch; and the media cost for CFB was the highest due to the short batch duration. Our experimental data supports the argument that media cost for perfusion process could be even lower than that in a fed‐batch process, as long as sufficient bioreactor productivity is achieved. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:867–878, 2017     

Profiling of N‐glycosylation gene expression in CHO cell fed‐batch cultures

One of the goals of recombinant glycoprotein production is to achieve consistent glycosylation. Although many studies have examined the changes in the glycosylation quality of recombinant protein with culture, very little has been done to examine the underlying changes in glycosylation gene expression as a culture progresses. In this study, the expression of 24 genes involved in N‐glycosylation were examined using quantitative RT PCR to gain a better understanding of recombinant glycoprotein glycosylation during production processes. Profiling of the N‐glycosylation genes as well as concurrent analysis of glycoprotein quality was performed across the exponential, stationary and death phases of a fed‐batch culture of a CHO cell line producing recombinant human interferon‐γ (IFN‐γ). Of the 24 N‐glycosylation genes examined, 21 showed significant up‐ or down‐regulation of gene expression as the fed‐batch culture progressed from exponential, stationary and death phase. As the fed‐batch culture progressed, there was also an increase in less sialylated IFN‐γ glycoforms, leading to a 30% decrease in the molar ratio of sialic acid to recombinant IFN‐γ. This correlated with decreased expression of genes involved with CMP sialic acid synthesis coupled with increased expression of sialidases. Compared to batch culture, a low glutamine fed‐batch strategy appears to need a 0.5 mM glutamine threshold to maintain similar N‐glycosylation genes expression levels and to achieve comparable glycoprotein quality. This study demonstrates the use of quantitative real time PCR method to identify possible “bottlenecks” or “compromised” pathways in N‐glycosylation and subsequently allow for the development of strategies to improve glycosylation quality. Biotechnol. Bioeng. 2010;107: 516–528. © 2010 Wiley Periodicals, Inc.     

Nisin production of Lactococcus lactis N8 with hemin‐stimulated cell respiration in fed‐batch fermentation system

In this study, nisin production of Lactococcus lactis N8 was optimized by independent variables of glucose, hemin and oxygen concentrations in fed‐batch fermentation in which respiration of cells was stimulated with hemin. Response surface model was able to explain the changes of the nisin production of L. lactis N8 in fed‐batch fermentation system with high fidelity (R² 98%) and insignificant lack of fit. Accordingly, the equation developed indicated the optimum parameters for glucose, hemin, and dissolved oxygen were 8 g L^?1 h^?1, 3 μg mL^?1 and 40%, respectively. While 1711 IU mL^?1 nisin was produced by L. lactis N8 in control fed‐batch fermentation, 5410 IU mL^?1 nisin production was achieved within the relevant optimum parameters where the respiration of cell was stimulated with hemin. Accordingly, nisin production was enhanced 3.1 fold in fed‐batch fermentation using hemin. In conclusion the nisin production of L. lactis N8 was enhanced extensively as a result of increasing the biomass by stimulating the cell respiration with adding the hemin in the fed‐batch fermentation. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:678–685, 2015     

Quantitative physiology of Pichia pastoris during glucose‐limited high‐cell density fed‐batch cultivation for recombinant protein production

Pichia pastoris has become one of the major microorganisms for the production of proteins in recent years. This development was mainly driven by the readily available genetic tools and the ease of high‐cell density cultivations using methanol (or methanol/glycerol mixtures) as inducer and carbon source. To overcome the observed limitations of methanol use such as high heat development, cell lysis, and explosion hazard, we here revisited the possibility to produce proteins with P. pastoris using glucose as sole carbon source. Using a recombinant P. pastoris strain in glucose limited fed‐batch cultivations, very high‐cell densities were reached (more than 200 g_CDW L^?1) resulting in a recombinant protein titer of about 6.5 g L^?1. To investigate the impact of recombinant protein production and high‐cell density fermentation on the metabolism of P. pastoris, we used ¹³C‐tracer‐based metabolic flux analysis in batch and fed‐batch experiments. At a controlled growth rate of 0.12 h^?1 in fed‐batch experiments an increased TCA cycle flux of 1.1 mmol g^?1 h^?1 compared to 0.7 mmol g^?1 h^?1 for the recombinant and reference strains, respectively, suggest a limited but significant flux rerouting of carbon and energy resources. This change in flux is most likely causal to protein synthesis. In summary, the results highlight the potential of glucose as carbon and energy source, enabling high biomass concentrations and protein titers. The insights into the operation of metabolism during recombinant protein production might guide strain design and fermentation development. Biotechnol. Bioeng. 2010;107: 357–368. © 2010 Wiley Periodicals, Inc.     

High cell density fed batch and perfusion processes for stable non-viral expression of secreted alkaline phosphatase (SEAP) using insect cells: comparison to a batch Sf-9-BEV system

The development of insect cells expressing recombinant proteins in a stable continuous manner is an attractive alternative to the BEV system for recombinant protein production. High cell density fed batch and continuous perfusion processes can be designed to maximize the productivity of stably transformed cells. A cell line (Sf-9SEAP) expressing high levels of the reporter protein SEAP stably was obtained by lipid-mediated transfection of Sf-9 insect cells and further selection and screening. The expression of the Sf-9SEAP cells was compared with the BEVS system. It was observed that, the yield obtained in BEVS was similar to the batch Sf-9SEAP at 8 and 7 IU/mL, respectively. The productivity of this foreign gene product with the stable cells was enhanced by bioprocess intensification employing the fed-batch and perfusion modes of culture to increase the cell density in culture. The fed batch process yielded a maximum cell density of 28 x 10(6) cells/mL and 12 IU/mL of SEAP. Further improvements in the productivity could be made using the perfusion process, which demonstrated a stable production rate for extended periods of time. The process was maintained for 43 days, with a steady-state cell density of 17-20 x 10(6) cells/mL and 7 IU/mL SEAP. The total yield obtained in the perfusion process (394 IU) was approximately 22 and 8 times higher than that obtained in a batch (17.6 IU) and fed batch (46.1 IU) process, respectively.     

Very high density of Chinese hamster ovary cells in perfusion by alternating tangential flow or tangential flow filtration in WAVE bioreactor™—part II: Applications for antibody production and cryopreservation

A high cell density perfusion process of monoclonal antibody (MAb) producing Chinese hamster ovary (CHO) cells was developed in disposable WAVE Bioreactor? using external hollow fiber (HF) filter as cell separation device. Tangential flow filtration (TFF) and alternating tangential flow (ATF) systems were compared and process applications of high cell density perfusion were studied here: MAb production and cryopreservation. Operations by perfusion using microfiltration (MF) or ultrafiltration (UF) with ATF or TFF and by fed‐batch were compared. Cell densities higher than 10⁸ cells/mL were obtained using UF TFF or UF ATF. The cells produced comparable amounts of MAb in perfusion by ATF or TFF, MF or UF. MAbs were partially retained by the MF using ATF or TFF but more severely using TFF. Consequently, MAbs were lost when cell broth was discarded from the bioreactor in the daily bleeds. The MAb cell‐specific productivity was comparable at cell densities up to 1.3 × 10⁸ cells/mL in perfusion and was comparable or lower in fed‐batch. After 12 days, six times more MAbs were harvested using perfusion by ATF or TFF with MF or UF, compared to fed‐batch and 28× more in a 1‐month perfusion at 10⁸ cells/mL density. Pumping at a recirculation rate up to 2.75 L/min did not damage the cells with the present TFF settings with HF short circuited. Cell cryopreservation at 0.5 × 10⁸ and 10⁸ cells/mL was performed using cells from a perfusion run at 10⁸ cells/mL density. Cell resuscitation was very successful, showing that this system was a reliable process for cell bank manufacturing. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:768–777, 2013     

Batch and fed batch cultivations for the temperature induced production of a recombinant protein inEscherichia coli

Summary The temperature induced intracellular production of the fused protein SpA-gal (protein A/-galactosidase) withE. coli was compared in batch and fed batch culture. By introducing fed batch cultivation a final cell dry weight of 77.0 g/l was achieved, as compared to 16.4 g/l in batch cultivation. The concentration of SpA-gal in the fed batch cultivation was very high, 19.2 g/l. This corresponded to 25% of the cell dry weight.     

Feed development for fed‐batch CHO production process by semisteady state analysis

Semisteady state cultures are useful for studying cell physiology and facilitating media development. Two semisteady states with a viable cell density of 5.5 million cells/mL were obtained in CHO cell cultures and compared with a fed‐batch mode control. In the first semisteady state, the culture was maintained at 5 mM glucose and 0.5 mM glutamine. The second condition had threefold higher concentrations of both nutrients, which led to a 10% increase in lactate production, a 78% increase in ammonia production, and a 30% reduction in cell growth rate. The differences between the two semisteady states indicate that maintaining relatively low levels of glucose and glutamine can reduce the production of lactate and ammonia. Specific amino acid production and consumption indicated further metabolic differences between the two semisteady states and fed‐batch mode. The results from this experiment shed light in the feeding strategy for a fed‐batch process and feed medium enhancement. The fed‐batch process utilizes a feeding strategy whereby the feed added was based on glucose levels in the bioreactor. To evaluate if a fixed feed strategy would improve robustness and process consistency, two alternative feeding strategies were implemented. A constant volume feed of 30% or 40% of the initial culture volume fed over the course of cell culture was evaluated. The results indicate that a constant volumetric‐based feed can be more beneficial than a glucose‐based feeding strategy. This study demonstrated the applicability of analyzing CHO cultures in semisteady state for feed enhancement and continuous process improvement. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Experimental and modelling study of different process modes for retroviral production in a fixed bed reactor

Pseudotype vectors are promising for gene transfer in many gene therapy approaches, however, low-vector concentration in batch cultures and high temperature-dependent decay do limit sufficiently large-scale production. To overcome these obstacles, the kinetic relations of cell growth and vector formation in different culture modes need to be understood. Effective optimisation of process modes is needed to achieve sufficient yields. Experimental and modelling studies were carried out in order to analyse the impact of different process modes such as perfusion, perfused fed-batch or repeated-batch on vector titer and productivity. Retroviral pseudotype vector, derived from the murine leukaemia virus carrying the HIV-1 envelop protein MLV (HIV-1) were produced using a 200 ml fixed bed reactor for high cell density cultivation on macroporous carriers. After starting the cultivation in batch mode, the reactor was either run in perfusion, perfused fed-batch or repeated-batch. A mathematical model of the bioreaction was developed on the basis of experimental data measured in culture dishes. The ability of the model to describe all different process modes of fixed-bed cultivation without additional fitting of the parameters was proven by three long-term cultivations for more than 400 h. The results of optimisation with the aid of the model, leads to the conclusion that perfusion with optimised harvest cycles and fed flows, result in a higher yield in comparison to batch or fed batch culture.     

Perfusion seed cultures improve biopharmaceutical fed‐batch production capacity and product quality

Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof‐of‐concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high‐seed fed‐batch production cultures. First, we optimized the perfusion N‐1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N‐1 duration, reaching >40 × 10⁶ vc/mL at the end of the perfusion N‐1 stage. The cultures were subsequently split into high‐seed (10 × 10⁶ vc/mL) fed‐batch production cultures. This strategy significantly shortened the culture duration. The high‐seed fed‐batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low‐seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N‐1 and high‐seed fed‐batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low‐seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:616–625, 2014     

Multi-stage high cell continuous fermentation for high productivity and titer

We carried out the first simulation on multi-stage continuous high cell density culture (MSC-HCDC) to show that the MSC-HCDC can achieve batch/fed-batch product titer with much higher productivity to the fed-batch productivity using published fermentation kinetics of lactic acid, penicillin and ethanol. The system under consideration consists of n-serially connected continuous stirred-tank reactors (CSTRs) with either hollow fiber cell recycling or cell immobilization for high cell-density culture. In each CSTR substrate supply and product removal are possible. Penicillin production is severely limited by glucose metabolite repression that requires multi-CSTR glucose feeding. An 8-stage C-HCDC lactic acid fermentation resulted in 212.9 g/L of titer and 10.6 g/L/h of productivity, corresponding to 101 and 429% of the comparable lactic acid fed-batch, respectively. The penicillin production model predicted 149% (0.085 g/L/h) of productivity in 8-stage C-HCDC with 40 g/L of cell density and 289% of productivity (0.165 g/L/h) in 7-stage C-HCDC with 60 g/L of cell density compared with referring batch cultivations. A 2-stage C-HCDC ethanol experimental run showed 107% titer and 257% productivity of the batch system having 88.8 g/L of titer and 3.7 g/L/h of productivity. MSC-HCDC can give much higher productivity than batch/fed-batch system, and yield a several percentage higher titer as well. The productivity ratio of MSC-HCDC over batch/fed-batch system is given as a multiplication of system dilution rate of MSC-HCDC and cycle time of batch/fed-batch system. We suggest MSC-HCDC as a new production platform for various fermentation products including monoclonal antibody.     

Bioreactor operating strategy inThalictrum rugosum plant cell culture for the production of berberine

Optimal substrate feeding strategy in bioreactor operation was investigated to increase the production of secondary metabolite in a high density culture of plant cell. It was accomplished by the previously proposed structured kinetic model that describes the cell growth and synthesis of the secondary metabolite, berberine, in a batch suspension culture ofThalictrum rugosum. Four types of operation strategies for sugar feeding intoT. rugosum culture were proposed based on the model, which were the periodic fedbatch operations to maintain the cell activity, the cell viability, and the specific production rate, and the perfusion operation to maintain the specific production rate. From the simulation results of these strategies, it could be found that the periodic fed-batch operation and the perfusion operation could achieve the higher volumetric production of berberine (mg berberine/L) and specific production yield (mg berberine/g dry cell weight) than those of batch cultures. Although the highest productivity (mg berberine/day) of berberine could be achieved by the periodic fed-batch operation to maintain the cell activity compared with the other strategies in the periodic fed-batch operations, the specific production yield was low due to the higher maximum dry cell weight than other cases. The periodic fed-batch operation to maintain cell viability resulted in the highest volumetric production of berberine and specific production yield compared with the other strategies. In the cases of maintaining the specific production rate, the per-formance of the periodic fed-batch operation was better than that of the perfusion operation in the respect of the volumetric production and productivity of berberine. In order to increase the volumetric production of berberine and to get the highest specific production yield, the periodic fed-batch operation to maintain cell viability could be chosen as the optimal operating strategy in high density, culture ofT. rugosum plant cell.     

Improved algal oil production from Botryococcus braunii by feeding nitrate and phosphate in an airlift bioreactor

To improve biomass and microalgal oil production of Botryococcus braunii, fed‐batch culture was investigated in an airlift photobioreactor. The optimal feeding time of the fed‐batch culture was after 15 days of cultivation, where 1.82 g/L of the microalgal biomass was obtained in the batch culture. Nitrate nutrient was the restrictive factor for the fed‐batch cultivation while phosphate nutrient with high concentration did not affect the microalgal growth. The optimal mole ratio of nitrate to phosphate was 34.7:1, where nitrate concentration reached the initial level and phosphate concentration was one quarter of its initial level. With one feeding, the biomass of B. braunii reached 2.56 g/L after 18 days. Two feedings in 2‐day interval enhanced the biomass production up to 2.87 g/L after 19 days of cultivation. The hydrocarbon content in dry biomass of B. braunii kept at high level of 64.3% w/w. Compared with the batch culture, biomass production and hydrocarbon productivity of B. braunii were greatly improved by the strategic fed‐batch cultivation.     

Effect of high density cultivation on plasmid copy number in recombinantEscherichia coli cells

Summary The copy number of plasmid harboringE. coli K 12 strains was examined in fed batch cultivations in semisynthetic and synthetic media. Under conditions of high cell density (45–50 g dry weight/I) the plasmid copy number reached a maximum level between 200 and 400 copies per cell. A decrease of phosphate concentration in the medium was obtained similar to the increase of copy number. A high segregational and structural stability of vectors used in this work was observed.     

Principles and approach to developing mammalian cell culture media for high cell density perfusion process leveraging established fed‐batch media

Perfusion medium was successfully developed based on our fed‐batch platform basal and feed media. A systematic development approach was undertaken by first optimizing the ratios of fed‐batch basal and feed media followed by targeted removal of unnecessary and redundant components. With this reduction in components, the medium could then be further concentrated by 2× to increase medium depth. The medium osmolality was also optimized where we found ～360 mOsm/kg was desirable resulting in a residual culture osmolality of ～300 mOsm/kg for our cell lines. Further building on this, the amino acids Q, E, N, and D were rebalanced to reduce lactate and ammonium levels, and increase the cell‐specific productivity without compromising on cell viability while leaving viable cell density largely unaffected. Further modifications were also made by increasing certain important vitamin and lipid concentrations, while eliminating other unnecessary vitamins. Overall, an effective perfusion medium was developed with all components remaining in the formulation understood to be important and their concentrations increased to improve medium depth. The critical cell‐specific perfusion rate using this medium was then established for a cell line of interest to be 0.075 nL/cell‐day yielding 1.2 g/L‐day at steady state. This perfusion process was then successfully scaled up to a 100 L single‐use bioreactor with an ATF6 demonstrating similar performance as a 2 L bioreactor with an ATF2. Large volume handling challenges in our fed‐batch facility were overcome by developing a liquid medium version of the powder medium product contained in custom totes for plug‐and‐play use with the bioreactor. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:891–901, 2017     

Enhancing the catalytic potential of nitrilase from Pseudomonas putida for stereoselective nitrile hydrolysis

(R)-mandelic acid was produced from racemic mandelonitrile using free and immobilized cells of Pseudomonas putida MTCC 5110 harbouring a stereoselective nitrilase. In addition to the optimization of culture conditions and medium components, an inducer feeding approach is suggested to achieve enhanced enzyme production and therefore higher degree of conversion of mandelonitrile. The relationship between cell growth periodicity and enzyme accumulation was also studied, and the addition of the inducer was delayed by 6 h to achieve maximum nitrilase activity. The nitrilase expression was also authenticated by the sodium dodecyl phosphate-polyacrylamide gel electrophoresis analysis. P. putida MTCC 5110 cells were further immobilized in calcium alginate, and the immobilized biocatalyst preparation was used for the enantioselective hydrolysis of mandelonitrile. The immobilized system was characterized based on the Thiele modulus (ϕ). Efficient biocatalyst recycling was achieved as a result of immobilization with immobilized cells exhibiting 88% conversion even after 20 batch recycles. Finally, a fed batch reaction was set up on a preparative scale to produce 1.95 g of (R)-(-)-mandelic acid with an enantiomeric excess of 98.8%.     

Biosensor online control of citric acid production from glucose by Yarrowia lipolytica using semicontinuous fermentation

Our study aimed at the development of an effective method for citric acid production from glucose by use of the yeast Yarrowia lipolytica. The new method included an automated bioprocess control using a glucose biosensor. Several fermentation methodologies including batch, fed‐batch, repeated batch and repeated fed‐batch cultivation were tested. The best results were achieved during repeated fed‐batch cultivation: Within 3 days of cycle duration, approximately 100 g/L citric acid were produced. The yields reached values between 0.51 and 0.65 g/g and the selectivity of the bioprocess for citric acid was as high as 94%. Due to the elongation of the production phase of the bioprocess with growth‐decoupled citric acid production, and by operating the fermentation in cycles, an increase in citric acid production of 32% was achieved compared with simple batch fermentation.     

Soluble production and function of vascular endothelial growth factor/basic fibroblast growth factor complex peptide

Vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) are important proangiogenic factors in tumor procession. The autocrine and paracrine bFGF and the VEGF in tumor tissue can promote tumor angiogenesis, tumor growth, and metastasis. A VEGF/bFGF Complex Peptide (VBP3) was designed on the basis of epitope peptides from both VEGF and bFGF to elicit in vivo production of anti‐bFGF and anti‐VEGF antibodies. In this study, we reported on the production of recombinant VBP3 using high cell density fermentation. Fed‐batch fermentation for recombinant VBP3 production was conducted, and the production procedure was optimized in a 10‐L fermentor. The fraction of soluble VBP3 protein obtained reached 78% of total recombinant protein output under fed‐batch fermentation. Purified recombinant VBP3 could inhibit tumor cell proliferation in vitro and stimulate C57BL/6 mice to produce high titer anti‐VEGF and anti‐bFGF antibodies in vivo. A melanoma‐grafted mouse model and an immunohistochemistry assay showed that tumor growth and tumor angiogenesis were significantly inhibited in VBP3‐vaccinated mice. These results demonstrated that soluble recombinant VBP3 could be produced by large‐scale fermentation, and the product, with good immunogenicity, elicited production of high‐titer anti‐bFGF and anti‐VEGF antibodies, which could be used as a therapeutic tumor vaccine to inhibit tumor angiogenesis and tumor growth. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 31:194–203, 2015     

Large scale production of chromatophores from Rhodospirillum rubrum by light-fed-batch cultivation

Summary With the purpose of large scale production of chromatophores, the photosynthetic bacterium, Rhodospirillum rubrum was cultivated in a 50 l illuminated fermenter. The influence of light intensity on the production of cell mass and the production of intracellular membrane, from which the chromatophores can be prepared, were studied. A high constant specific rate of intracellular membrane production could be obtained by successively increasing the light intensity i.e., by light fed batch cultivation.