Binding of genistein to human serum albumin demonstrated using tryptophan fluorescence quenching

Genistein is an isoflavone and phytoestrogen that is a potent inhibitor of cell proliferation and angiogenesis. This study was designed to investigate the binding of genistein to human serum albumin (HSA) under physiological conditions with drug concentrations in the range of 6.7 × 10⁻⁶ to 2.0 × 10⁻⁵ mol L⁻¹ and HSA concentration at 1.5 × 10⁻⁶ mol L⁻¹. Fluorescence quenching methods in combination with Fourier transform infrared (FT-IR) spectroscopy and circular dichroism (CD) spectroscopy was used to determine the binding mode, the binding constant and the protein structure changes in the presence of genistein in aqueous solution. Changes in the CD spectra and FT-IR spectra were observed upon ligand binding, and the degree of tryptophan fluorescence quenching change did significantly in the complexes. These data have proved the change in protein secondary structure accompanying ligand binding. The change in tryptophan fluorescence intensity was used to determine the binding constants. The thermodynamic parameters, the enthalpy change (ΔH) and the entropy change (ΔS) were calculated to be −22.24 kJ mol⁻¹and 19.60 J mol⁻¹ K⁻¹ according to the van’t Hoff equation, which indicated that hydrophobic and electrostatic interactions play the main role in the binding of genistein to HSA.     

Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

Synthesis of graft copolymer (k-carrageenan-g-N,N-dimethylacrylamide) and studies of metal ion uptake, swelling capacity and flocculation properties

Graft copolymer of k-carrageenan and N,N-dimethylacrylamide has been synthesized by free radical polymerization using peroxymonosulphate/glycolic acid redox pair in an inert atmosphere. The grafting parameters i.e. grafting ratio, add on and efficiency decrease with increase in concentration of k-carrageenan from 0.6 to 1.4 g dm⁻³ and hydrogen ion from 3 × 10⁻³ to 7 × 10⁻³ mol dm⁻³, but these grafting parameters increase with increase in concentration of N,N-dimethylacrylamide from 16 × 10⁻² to 32 × 10⁻² mol dm⁻³, and peroxymonosulphate from 0.8 × 10⁻² to 2.4 × 10⁻² mol dm⁻³. The metal ion sorption, swelling behaviour and flocculation properties have been studied. The intrinsic viscosity of pure and grafted samples has been measured by using Ubbelohde capillary viscometer. Flocculation capability of k-carrageenan and k-carrageenan-g-N,N-dimethylacrylamide for both coking and non-coking coals has been studied for the treatment of coal mine waste water. The graft copolymer has been characterized by Infrared (IR) spectroscopy and thermogravimetric analysis.     

Electrochemical quartz crystal impedance study on the overoxidation of polypyrrole-carbon nanotubes composite film for amperometric detection of dopamine

The electrochemical quartz crystal impedance (EQCI) method was used to study the overoxidation of polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNT) nanocomposite film in neutral and alkaline solutions. The values of molar mass per electron transferred (M/n) obtained during the overoxidation of PPy in 0.10 mol L⁻¹ Na₂SO₄ and 0.20 mol L⁻¹ NaOH aqueous solutions were estimated to be ca. 17 and 22 g mol⁻¹, respectively, suggesting the nucleophilic attack of solution OH⁻ to the pyrrole units during the overoxidation, and the possible partial formation of carboxylic groups after the overoxidation in the NaOH solution. Also, the overoxidized PPy–MWCNT composite film prepared in the NaOH solution showed a notably larger affinity to dopamine (DA) dissolved in a neutral phosphate buffer than that prepared in the Na₂SO₄ solution. The modification of the overoxidized nanocomposite film improved substantially the sensitivity for DA assay in a neutral phosphate buffer, as compared with the modification of overoxidized PPy or MWCNT alone. At a −6 kHz (201-nm thickness) nanocomposite film prepared in a polymerization bath containing 1.0 mg mL⁻¹ MWCNT and overoxidized in 0.20 mol L⁻¹ aqueous NaOH, the peak current response from differential pulse voltammetric assay of DA was linear with DA concentration from 4.0 × 10⁻⁸ to 1.4 × 10⁻⁶ mol L⁻¹, with a lower limit of detection of 1.7 nmol L⁻¹, good anti-interferent ability, as well as good stability and reproducibility.     

Epinephrine quantification in pharmaceutical formulations utilizing plant tissue biosensors

A plant tissue biosensor associated with flow injection analysis is proposed to determine epinephrine in pharmaceutical samples. The polyphenol oxidase enzymes present in the fibers of a palm tree fruits (Livistona chinensis), catalyses the oxidation of epinephrine to epinephrinequinone as a primary product. This product is then electrochemically reduced (at −0.10 V versus Ag/AgCl_sat) on the biosensor surface and the resulting current is used for the quantification of epinephrine. The biosensor provides a linear response for epinephrine in the concentration range from 5.0 × 10⁻⁵ to 3.5 × 10⁻⁴ mol l⁻¹. The limit of detection estimated for this interval was 1.5 × 10⁻⁵ mol l⁻¹ and the correlation coefficient of 0.998, working under a flow rate of 2.0 ml min⁻¹ and using a sample loop of 100 μl. The repeatability (R.S.D. for 10 consecutive determinations of a 3.0 × 10⁻⁴ mol l⁻¹ epinephrine solution) was 3.1%. The results obtained by the method here proposed were compared with the official UV spectrophotometric procedure and also using a plant tissue reactor. The responses obtained with the proposed strategies were in good agreement with both ways of analyses, whereas the values obtained by the official spectrophotometric method was strongly affected by benzoic acid, present in the formulation of pharmaceutical product utilized for inhalation. Such favorable results obtained with the carbon paste biosensor or utilizing the bioreactor, joined with the simplicity of its preparation turns these procedures very attractive for epinephrine quantification in pharmaceutical products.     

Binding of anti-inflammatory drug cromolyn sodium to bovine serum albumin

Fluorescence spectroscopy in combination with circular dichroism (CD) and UV–vis absorption spectroscopy were employed to investigate the binding of anti-inflammatory drug cromolyn sodium (Intal) to bovine serum albumin (BSA) under the physiological conditions with Intal concentrations of 0–6.4 × 10⁻⁵ mol L⁻¹. In the mechanism discussion, it was proved that the fluorescence quenching of BSA by Intal is a result of the formation of Intal–BSA complex. Quenching constants were determined using the Stern–Volmer equation to provide a measure of the binding affinity between Intal and BSA. The thermodynamic parameters ΔG, ΔH, ΔS at different temperatures (298, 304, and 310 K) were calculated and the results indicate the electrostatic interactions play a major role in Intal–BSA association. Binding studies concerning the number of binding sites (n = 1) and apparent binding constant K_b were performed by fluorescence quenching method. Utilizing fluorescence resonant energy transfer (FRET) the distance R between the donor (BSA) and acceptor (Intal) has been obtained. Furthermore, CD and synchronous fluorescence spectrum were used to investigate the structural change of BSA molecules with addition of Intal, the results indicate that the secondary structure of BSA molecules was changed in the presence of Intal.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.     

Direct electrochemistry of cytochrome c at ordered macroporous active carbon electrode

Three-dimensionally (3D) ordered macroporous active carbon has been fabricated and used as electrode substrate for the direct electrochemistry of horse heart cytochrome c (Cyt c). The Cyt c immobilized on the surface of the ordered macroporous active carbon shows a pair of well-defined and nearly reversible redox waves at the formal potential of −0.033 V in pH 6.8 phosphate buffer solution. The interaction between Cyt c and the 3D macroporous active carbon makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods have been used to investigate the interaction between Cyt c and the porous active carbon. The immobilized Cyt c maintains its biological activity, and shows a surface controlled electrode process with the electron-transfer rate constant (k_s) of 17.6 s⁻¹ and the charge-transfer coefficient (a) of 0.52, and displays the features of a peroxidase in the electrocatalytic reduction of hydrogen peroxide (H₂O₂). A potential application of the Cyt c-immobilized porous carbon electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2.0 × 10⁻⁵ to 2.4 × 10⁻⁴ mol l⁻¹. The detection limit (3σ) for determination of H₂O₂ has been found to be 1.46 × 10⁻⁵ mol l⁻¹.     

A performance comparison of choline biosensors: anodic or cathodic detections of H2O2 generated by enzyme immobilized on a conducting polymer

Amperometric choline biosensors were fabricated by the covalent immobilization of an enzyme of choline oxidase (ChO) and a bi-enzyme of ChO/horseradish peroxidase (ChO/HRP) onto poly-5,2′:5′,2″-terthiophene-3′-carboxylic acid (poly-TTCA) modified electrodes (CPMEs). A sensor modified with ChO utilized the oxidation process of enzymatically generated H₂O₂ in a choline solution at +0.6 V. The other one modified with ChO/HRP utilized the reduction process of H₂O₂ in a choline solution at −0.2 V. Experimental parameters affecting the sensitivity of sensors, such as pH, applied potential, and temperature were optimized. A performance comparison of two sensors showed that one based on ChO/HRP/CPME had a linear range from 1.0×10⁻⁶ to 8.0×10⁻⁵ M and the other based on ChO/CPME from 1.0×10⁻⁶ to 5.0×10⁻⁵ M. The detection limits for choline employing ChO/HRP/CPME and ChO/CPME were determined to be about 1.0×10⁻⁷ and 4.0×10⁻⁷ M, respectively. The response time of sensors was less than 5 s. Sensors showed good selectivity to interfering species. The long-term storage stability of the sensor based on ChO/HRP/CPME was longer than that based on ChO/CPME.     

Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

A simple and highly sensitive electrochemical impedance spectroscopy (EIS) biosensor based on a thrombin-binding aptamer as molecular recognition element was developed for the determination of thrombin. The signal enhancement was achieved by using gold nanoparticles (GNPs), which was electrodeposited onto a glassy carbon electrode (GCE), as a platform for the immobilization of the thiolated aptamer. In the measurement of thrombin, the change in interfacial electron transfer resistance of the biosensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The increase of the electron transfer resistance of the biosensor is linear with the concentration of thrombin in the range from 0.12 nM to 30 nM. The association and dissociation rate constants of the immobilized aptamer–thrombin complex were 6.7 × 10³ M⁻¹ s⁻¹ and 1.0 × 10⁻⁴ s⁻¹, respectively. The association and dissociation constants of three different immobilized aptamers binding with thrombin were measured and the difference of the dissociation constants obtained was discussed. This work demonstrates that GNPs electrodeposited on GCE used as a platform for the immobilization of the thiolated aptamer can improve the sensitivity of an EIS biosensor for the determination of protein. This work also demonstrates that EIS method is an efficient method for the determination of association and dissociation constants on GNPs modified GCE.     

CYP450 biosensors based on gold chips for antiepileptic drugs determination

Three-electrode configuration chips containing a Pt, Au and a screen-printed Ag/AgCl as counter, working and reference electrode, respectively, have been developed. Selective determination of Phenobarbital (PB) has been carried out by Cytochrome P450 2B4 (CYP450) immobilization into a polypyrrole matrix onto the gold working electrode. Chronoamperometric experiments show a PB diffusion coefficient of 2.42 × 10⁻⁶ cm² s⁻¹, a reproducibility and repeatability in terms of residual standard deviation (RSD) of 13% and 5.51%, respectively, and a limit of detection (LOD) of 0.289 μmol dm⁻³ ( = β = 0.05) for the developed CYP450-biosensor chip. Its performance has been showed by the determination of PB in pharmaceutical drugs. HPLC has been used as reference technique.     

SEC of mono-carboxymethyl cellulose (CMC) in a wide range of pH; Mark–Houwink constants

A method for determination of carboxymethyl cellulose (CMC) molecular weight (M_W) and chemical heterogeneity (degree of oxidation (DO)) using a bi-detector HPSEC (UV-detector online with refractometer) has been developed. It has been found that the use of 0.5 N NaOH or 0.4 M acetate buffer as the eluent ensures CMC separation according to M_W. It has been revealed that the universal calibration for the polyelectrolyte CMC and the neutral polymer dextran is valid under the conditions applied. The Mark–Houwink equations for CMC in 0.5 N NaOH and 0.4 M acetate buffer have been estimated to be [η]=5.37×10⁻⁴ M_W^0.73 and [η] =2.24×10⁻⁴ M_W^0.83 dl g⁻¹, respectively. The equation log K=1.64−4.00 ml g⁻¹ for CMC has been estimated. An approach for determining DO from adsorption at 290 or 313 nm has been developed.     

Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology, lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Enhancement of growth and gymnodimine production by the marine dinoflagellate, Karenia selliformis

Because of its novel bioactive properties the production of gymnodimine for use as a pharmaceutical precursor has aroused interest. The dinoflagellate, Karenia selliformis produces gymnodimine when grown in bulk culture using GP + selenium medium but the growth rates (μ) and levels of gymnodimine are low (μ, 0.05 days⁻¹; gymnodimine 250 μg L⁻¹ max). We describe the effects of organic acid additions (acetate, glycolate, alanine and glutamate additions and combinations of these) in enhancing growth and gymnodimine production in axenic cultures. The most effective organic acid combinations in decreasing order were: glycolate/alanine > acetate > glycolate. Glycolate/alanine optimised gymnodimine production by prolonging growth (maximum cell yield, 1.76 × 10⁵ cells mL⁻¹; gymnodimine, 1260 μg L⁻¹; growth rate (μ), 0.2 days⁻¹) compared to the control (growth maximum cell yield, 7.8 × 10⁴ cells mL⁻¹; gymnodimine, 780 μg L⁻¹; μ, 0.17 days⁻¹). Acetate enhanced gymnodimine by stimulating growth rate (μ, 0.23 days⁻¹) and the large concentration of gymnodimine per cell (16 pg cell⁻¹ cf. 9.8 pg cell⁻¹ for the control) suggests a role for this compound in gymnodimine biosynthesis. Amending culture media with Mn²⁺ additions resulted in slightly decreased growth in control cultures and increased the gymnodimine while in glycolate/alanine cultures growth was stimulated but gymnodimine production decreased. The results suggest that the organic acid can enhance gymnodimine production by either enhancing growth maximum or the biosynthetic pathway.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Fabrication of sucrose biosensor based on single mode planar optical waveguide using co-immobilized plant invertase and GOD

In present studies, the new optical sensing platform based on optical planar waveguide (OPWG) for sucrose estimation was reported. An evanescent-wave biosensor was designed by using novel agarose–guar gum (AG) biopolymer composite sol–gel with entrapped enzymes (acid invertase (INV) and glucose oxidase (GOD)). Partially purified watermelon invertase isolated from Citrullus vulgaris fruit (specific activity 832 units mg⁻¹) in combination with GOD was physically entrapped in AG sol–gel and cladded on the surface of optical planar waveguide. Na⁺–K⁺ ion-exchanged glass optical waveguides were prepared and employed for the fabrication of sucrose biosensor. By addressing the enzyme modified waveguide structure with, the optogeometric properties of adsorbed enzyme layer (12 μm) at the sensor solid–liquid interface were studied. The OPWG sensor with short response time (110 s) was characterized using the 0.2 M acetate buffer, pH 5.5. The fabricated sucrose sensor showed concentration dependent linear response in the range 1 × 10⁻¹⁰ to 1 × 10⁻⁶ M of sucrose. Lower limit of detection of this novel AG–INV–GOD cladded OPWG sensor was found to be 2.5 × 10⁻¹¹ M sucrose, which indicates that the developed biosensor has higher sensitivity towards sucrose as compared to earlier reported sensors using various transducer systems. Biochips when stored at room temperature, showed high stability for 81 days with 80% retention of original sensitivity. These sucrose sensing biochips showed good operational efficiency for 10 cycles. The proper confinement of acid invertase and glucose oxidase in hydrogel composite was confirmed by scanning electron microscopy (SEM) images. The constructed OPWG sensor is versatile, easy to fabricate and can be used for sucrose measurements with very high sensitivity.     

Direct glucose determination in blood using a reagentless optical biosensor

This paper demonstrates that glucose determination in blood can be done directly (without sample pretreatment) using a reagentless reversible biosensor based on the intrinsic spectroscopic properties of peroxidase (HRP). The biosensor, prepared by HRP and glucose oxidase entrapment in a polyacrylamide gel matrix, works in continuous mode, presents a linear response range from 1.5 × 10⁻⁶ up to 5.5 × 10⁻⁵ M and can be used for at least 750 measurements; in the best conditions (0.1 M pH 6 phosphate buffer, HRP and GOx amounts in the polymersation mixture for the sensor film preparation 0.0165 and 0.0010 g, respectively) the minimum samples rate is 30 h⁻¹. For glucose determination, blood is simply diluted in water (until haemolysis is completed) and fed into the sensor without a cleaning step between samples; the blood absorption is corrected in a simple way by working at a proper reference wavelength. The biosensor signals have been mathematically modeled in order to facilitate the design of sensors based on the same idea for other biochemical compounds.     

Determination of digoxin in serum samples using a flow-through fluorosensor based on a molecularly imprinted polymer

This work describes the development of a competitive flow-through FIA assay for digoxin using a molecularly imprinted polymer (MIP) as the recognition phase. In previous work, a number of non-covalent imprinted polymers were synthesised by “bulk” polymerisation. The digoxin binding and elution characteristics of these MIPs were then evaluated to obtain a highly selective material for integration into a sensor. The optimum MIP was synthesised by photo-initiated polymerisation of a mixture containing digoxin, MAA, EDGMA and AIBN in acetonitrile. The bulk polymer was ground and sieved and the template removed by Soxhlet extraction in MeOH/ACN. The MIP was packed into a flow cell and placed in a spectrofluorimeter to integrate the reaction and detection systems. The physical and chemical variables involved in digoxin determination by the sensor (nature and concentration of solution, flow rates, etc.) were optimised. Binding with the non-imprinted polymer (NIP) was also analysed. The new fluorosensor showed high selectivity and sensitivity, a detection limit of 1.7 × 10⁻² μg l⁻¹, and high reproducibility (R.S.D. of 1.03% and 1.77% for concentrations of 1.0 × 10⁻³ and 4.0 × 10⁻³ mg l⁻¹, respectively). Selectivity was tested by determining the cross-reactivity of several compounds with structures analogous to digoxin. Under the assay conditions used, in which the potential interfering compounds were in concentrations 100 times higher than that of the analyte, no interference was recorded. The proposed fluorosensor was successfully used to determine digoxin concentration of human serum samples.     

Effects of interactions with micellar interfaces on the activity and structure of different lipolytic isoenzymes from Candida rugosa

The conformational and functional changes of cholesterol esterase (CE) and isolipase (CRL) from Candida rugosa after exposure to a micellar interface and subsequent extraction to a fresh buffer were studied. These two enzymes were activated by interaction with the micellar interface of a sulphosuccinic acid bis[2-ethylhexyl] ester/n-heptane/water system. For the hydrolysis of p-nitrophenyl butyrate ester in water, the catalytic efficiencies of CE and CRL were both improved because on activation their k_cat values increased from 378 to 465 and from 250 to 680 s⁻¹, respectively, while their K_m values decreased from 5.08 × 10⁻⁵ to 3.23 × 10⁻⁵ and from 2.28 × 10⁻⁴ to 1.14 × 10⁻⁴ M, respectively. After exposure to the micelles, CE showed a marked increase in its -helical content from 28 to 49%, but only limited changes were detected when CRL was exposed. These proteins exhibit similar capacities for increasing their -helical content in a helicogenic medium. In acetonitrile/water mixtures, CRL exhibits a partial decrease in the extent of its secondary structure, while CE exhibits an increase in its -helical content. The fact that this medium of reduced polarity permits one to simulate the effect of the AOT reverse micelles on the conformation of CE (increased helicity) but not their effect on the structure of CRL (decreased helicity) supports the hypothesis that only CE interacts to a significant extent with the apolar side of the micellar interface. After exposure to micelles of octyl-β-glucopyranoside, CE (but not CRL) showed a 10% increase in its -helical content.     

Properties of amino-terminal parathyroid hormone-related peptides modified at positions 11–13

Biological properties of amino-terminal PTHrP analogues modified in the region 11–13 were examined using ROS 17/2.8 cells. [Leu¹¹,D-Trp¹²,Arg¹³,Tyr³⁶]PTHrP(1–36)amide had a 17-fold lower binding affinity for the receptor (apparent K_d: 5 × 10⁻⁸ M) than [Tyr³⁶]PTHrP(1–36)amide or [Arg^11,13,Tyr³⁶]PTHrP(1–36)amide (apparent K_d for both: 2 × 10⁻⁹ M). Moreover, it is only a weak partial agonist despite completely inhibiting radioligand binding. [Leu¹¹,D-Trp¹²,Arg¹³,Tyr³⁶,Cys³⁸]PTHrP(7–38) and PTHrP(7–34)amide had similar receptor affinities (apparent K_ds: 5 × 10⁻⁸ M and 8 × 10⁻⁸ M), while that of [Nle^8,18,Tyr³⁴]bPTH(7–34)amide was more than 10-fold lower (apparent K_d: 2 × 10⁻⁶ M). These changes in biological properties suggest that high affinity receptor binding requires both amino- and carboxyl-terminal domains of the PTHrP(1–36) sequence and/or intramolecular interactions which are impaired by the D-Trp substitution for Gly¹².