2-Hydroxylethyl methacrylate (HEMA), a tooth restoration component, exerts its genotoxic effects in human gingival fibroblasts trough methacrylic acid, an immediate product of its degradation

HEMA (2-hydroxyethyl methacrylate), a methacrylate commonly used in dentistry, was reported to induce genotoxic effects, but their mechanism is not fully understood. HEMA may be degraded by the oral cavity esterases or through mechanical stress following the chewing process. Methacrylic acid (MAA) is the primary product of HEMA degradation. In the present work we compared cytotoxic and genotoxic effects induced by HEMA and MAA in human gingival fibroblasts (HGFs). A 6-h exposure to HEMA or MAA induced a weak decrease in the viability of HGFs. Neither HEMA nor MAA induced strand breaks in the isolated plasmid DNA, but both compounds evoked DNA damage in HGFs, as evaluated by the alkaline comet assay. Oxidative modifications to the DNA bases were monitored by the DNA repair enzymes Endo III and Fpg. DNA damage induced by HEMA and MAA was not persistent and was removed during a 120 min repair incubation. Results from the neutral comet assay indicated that both compounds induced DNA double strand breaks (DSBs) and they were confirmed by the γ-H2AX assay. Both compounds induced apoptosis and perturbed the cell cycle. Therefore, methacrylic acid, a product of HEMA degradation, may be involved in its cytotoxic and genotoxic action.     

Lipase catalyzed HEMA initiated ring-opening polymerization: in situ formation of mixed polyester methacrylates by transesterification

2-Hydroxyethyl methacrylate (HEMA) was used as initiator for the enzymatic ring-opening polymerization (ROP) of omega-pentadecalactone (PDL) and epsilon-caprolactone (CL). The lipase B from Candida antarctica was found to catalyze the cleavage of the ester bond in the HEMA end group of the formed polyesters, resulting in two major transesterification processes, methacrylate transfer and polyester transfer. This resulted in a number of different polyester methacrylate structures, such as polymers without, with one, and with two methacrylate end groups. Furthermore, the 1,2-ethanediol moiety (from HEMA) was found in the polyester products as an integral part of HEMA, as an end group (with one hydroxyl group) and incorporated within the polyester (polyester chains acylated on both hydroxyl groups). After 72 h, as a result of the methacrylate transfer, 79% (48%) of the initial amount of the methacrylate moiety (from HEMA) was situated (acylated) on the end hydroxyl group of the PPDL (PCL) polyester. In order to prepare materials for polymer networks, fully dimethacrylated polymers were synthesized in a one-pot procedure by combining HEMA-initiated ROP with end-capping using vinyl methacrylate. The novel PPDL dimethacrylate (>95% incorporated methacrylate end groups) is currently in use for polymer network formation. Our results show that initiators with cleavable ester groups are of limited use to obtain well-defined monomethacrylated macromonomers due to the enzyme-based transesterification processes. On the other hand, when combined with end-capping, well-defined dimethacrylated polymers (PPDL, PCL) were prepared.     

NMR imaging of the diffusion of water at 310 K into semi-IPNs of PEM and poly(HEMA-co-THFMA) with and without chlorhexidine diacetate

Magnetic resonance imaging has been used to monitor the diffusion of water at 310 K into a series of semi-IPNs of poly(ethyl methacrylate), PEM, and copolymers of 2-hydroxyethyl methacrylate, HEMA, and tetrahydrofurfuryl methacrylate, THFMA. The diffusion was found to be well described by a Fickian kinetic model in the early stages of the water sorption process, and the diffusion coefficients were found to be slightly smaller than those for the copolymers of HEMA and THFMA, P(HEMA-co-THFMA), containing the same mole fraction of HEMA in the matrix. A second stage sorption process was identified in the later stage of water sorption by the PEM/PTHFMA semi-IPN and for the systems containing a P(HEMA-co-THFMA) component with a mole fraction HEMA of 0.6 or less. This was characterized by the presence of water near the surface of the cylinders with a longer NMR T(2) relaxation time, which would be characteristic of mobile water, such as water present in large pores or surface fissures. The presence of the drug chlorhexidine in the polymer matrixes at a concentration of 5.625 wt % was found not to modify the properties significantly, but the diffusion coefficients for the water sorption were systematically smaller when the drug was present.     

Substrate inhibition or activation kinetics of the beta-galactosidase from the extreme thermoacidophile archaebacterium Caldariella acidophila

The kinetics of the hydrolysis of p-nitrophenyl-beta-D-galactopyranoside (pNPG) by a thermophile, beta-galactosidase, was studied at different temperatures. This enzyme was isolated from the thermophilic microorganism archaebacterium Caldariella acidophila. The hydrolysis of pNPG by beta-galactosidase does not follow Michaelis-Menten law. This enzyme is inhibited by excess substrate at low temperatures and it is activated by excess substrate at high temperatures. A minimum mechanistic model is proposed to explain the behaviour. This model assumes the binding of an additional substrate molecule on the glycosidyl enzyme intermediate. This model is in good agreement with the postulated mechanism for beta-galactosidase from Escherichia coli. The kinetic parameters are calculated at six different temperatures.     

PFG-NMR measurements of the self-diffusion coefficients of water in equilibrium poly(HEMA-co-THFMA) hydrogels

The self-diffusion coefficients for water in a series of copolymers of 2-hydroxyethyl methacrylate, HEMA, and tetrahydrofurfuryl methacrylate, THFMA, swollen with water to their equilibrium states have been studied at 310 K using PFG-NMR. The self-diffusion coefficients calculated from the Stejskal-Tanner equation, D(obs), for all of the hydrated polymers were found to be dependent on the NMR storage time, as a result of spin exchange between the proton reservoirs of the water and the polymers, reaching an equilibrium plateau value at long storage times. The true values of the diffusion coefficients were calculated from the values of D(obs) in the plateau regions by applying a correction for the fraction of water protons present, obtained from the equilibrium water contents of the gels. The true self-diffusion coefficient for water in polyHEMA obtained at 310 K by this method was 5.5 x 10(-10) m(2)s-1. For the copolymers containing 20% HEMA or more a single value of the self-diffusion coefficient was found, which was somewhat larger than the corresponding values obtained for the macroscopic diffusion coefficient from sorption measurements. For polyTHFMA and copolymers containing less than 20% HEMA, the PFG-NMR stimulated echo attenuation decay curves and the log-attenuation plots were characteristic of the presence of two diffusing water species. The self-diffusion coefficients of water in the equilibrium-hydrated copolymers were found to be dependent on the copolymer composition, decreasing with increasing THFMA content.     

Characterization of a thermostable extracellular beta-galactosidase from a thermophilic fungus Rhizomucor sp

An extracellular beta-galactosidase from a thermophilic fungus Rhizomucor sp. has been purified to homogeneity by successive DEAE cellulose chromatography followed by gel filtration on Sephacryl S-300. The native molecular mass of the enzyme is 250,000 and it is composed of two identical subunits with molecular mass of 120,000. It is an acidic protein with a pI of 4.2. Purified beta-galactosidase is a glycoprotein and contains 8% neutral sugar. The optimum pH and temperature for enzyme activity are 4.5 and 60 degrees C, respectively. The enzyme is stable at 60 degrees C for 4 h, and has a t(1/2) of 150 min(-1) at 70 degrees C which is one of the highest reported for fungal beta-galactosidases. Substrate specificity studies indicated that the enzyme is specific for beta-linked galactose residues with a preference for p-nitrophenyl-beta-D-galactopyranoside (pNPG). The Km and Vmax values for the synthetic substrates pNPG and o-nitrophenyl-beta-D-galactopyranoside (oNPG) were 0.66 mM and 1.32 mM; and 22.4 mmol min(-1) mg(-1) and 4.45 mmol min(-1) mg(-1), respectively, while that for the natural substrate, lactose, was 50.0 mM and 12 mmol min(-1) mg(-1). The end product galactose and the substrate analogue isopropyl thiogalactopyranoside (ITPG) inhibited the enzyme with Ki of 2.6 mM and 12.0 mM, respectively. The energy of activation for the enzyme using pNPG and oNPG were 27.04 kCal and 9.04 kCal, respectively. The active site characterization studies using group-specific reagents revealed that a tryptophan and lysine residue play an important role in the catalytic activity of the enzyme.     

Magnetic hydrophilic methacrylate-based polymer microspheres designed for polymerase chain reactions applications

Magnetic hydrophilic non-porous P(HEMA-co-EDMA), P(HEMA-co-GMA) and PGMA microspheres were prepared by dispersion (co)polymerization of 2-hydroxyethyl methacrylate (HEMA) and ethylene dimethacrylate (EDMA) or glycidyl methacrylate (GMA) in the presence of several kinds of magnetite. It was found that some components used in the preparation of magnetic carriers interfered with polymerase chain reaction (PCR). Influence of non-magnetic and magnetic microspheres, including magnetite nanoparticles and various components used in their synthesis, on the PCR course was thus investigated. DNA isolated from bacterial cells of Bifidobacterium longum was used in PCR evaluation of non-interfering magnetic microspheres. The method enabled verification of the incorporation of magnetite nanoparticles in the particular methacrylate-based polymer microspheres and evaluation of suitability of their application in PCR. Preferably, electrostatically stabilized colloidal magnetite (ferrofluid) should be used in the design of new magnetic methacrylate-based microspheres by dispersion polymerization.     

Divergent regulation of the HEMA gene family encoding glutamyl-tRNA reductase in Arabidopsis thaliana: expression of HEMA2 is regulated by sugars,but is independent of light and plastid signalling

The synthesis of 5-aminolevulinic acid (ALA) is a key regulatory step for the production of hemes and chlorophyll via the tetrapyrrole synthesis pathway. The first enzyme committed to ALA synthesis is glutamyl-tRNA reductase encoded in Arabidopsis by a small family of nuclear-encoded HEMA genes. To better understand the regulation of the tetrapyrrole synthesis pathway we have made a detailed study of HEMA2 expression with transgenic Arabidopsis thaliana L. Col. plants carrying chimeric HEMA2 promoter:gusA fusion constructs. Our results show that the HEMA2 promoter directs expression predominantly to roots and flowers, but that HEMA2 is also expressed at low levels in photosynthetic tissues. Deletion analysis of the HEMA2 promoter indicates that a ca. 850 bp fragment immediately upstream of the HEMA2 coding region is sufficient to drive regulated gusA expression. In contrast to HEMA1, HEMA2 is not up-regulated by red, far-red, blue, UV or white light. In addition, elimination of a promotive plastid signal by Norflurazon-induced photobleaching of plastids had no effect on HEMA2 expression while being required for normal white-light induction of HEMA1. HEMA2 expression in the cotyledons is inhibited by the presence of sucrose or glucose, but not fructose, and this response is light-independent. HEMA1 expression in cotyledons is also inhibited by sugars, but in a strictly light-dependent manner. The roles of HEMA1 and HEMA2 in meeting cellular tetrapyrrole requirements are discussed.     

Effects of Storing Initiated 2-Hydroxyethyl Methacrylate Solutions for Embedding Tissues for Light Microscopy: Some Practical Implications

The effects of storing 2-hydroxy-ethyl methacrylate (HEMA) solutions for embedding tissues for light microscopy were studied using three commercially available HEMA embedding kits: Technovit 7100, Technovit 8100, and JB-4. These HEMA solutions were examined at various times of storage over a period of one year using a panel of physicochemical techniques including gas chromatography, tltration, viscosimetry, determination of the maximum polymerization temperature and the time required to reach the maximum temperature, and detection of degradation products of HEMA monomers by histochemical procedures. The quality of the resin blocks was examined by the observation of mini-folds in sections. Data obtained from these tests showed that the release of by-products as a result of the degradation of the HEMA monomer during storage of HEMA solutions does not occur. Development of cross-linking agents by transesterification of HEMA monomer was not detected either. Gradual decrease of the inhibitor concentration during storage proved to be the main cause of the reduction of shelf-life of HEMA solutions. Inconsistent tissue infiltration after storage may be due to decreased rates of tissue penetration as a result of HEMA chain lengthening. Guidelines for safe and economical handling of HEMA mixtures are given.     

Identification of covalent binding sites of ethyl 2-cyanoacrylate,methyl methacrylate and 2-hydroxyethyl methacrylate in human hemoglobin using LC/MS/MS techniques

Acrylates are used in vast quantities, for instance in paints, adhesive glues, molding. They are potent contact allergens and known to cause respiratory hypersensitivity and asthma. Here we study ethyl 2-cyanoacrylate (ECA), methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA). There are only limited possibilities to measure the exposure to acrylates, especially for biological monitoring. The aim of the present study was to investigate the chemical structures of adducts formed after reaction of hemoglobin (Hb) with ECA, MMA, and HEMA. This information may be used to identify adducted Hb peptides for biological monitoring of exposure to acrylates. Hb-conjugates with ECA, MMA, and HEMA were synthesized in vitro. The conjugates were digested by trypsin and pronase E. Adducted peptides were characterized and analyzed by liquid chromatography and nano electro spray/hybrid quadrupole time-of-flight mass spectrometry (MS) as well as tandem quadrupole MS. The search for the adducted peptides was facilitated by visualizing the MS data by different computer programs. The results showed that ECA binds covalently to cysteines at the 104 position in the α and the position 112 in the β-chains in Hb. MMA and HEMA bound to all the cysteines in both chains, Cys¹⁰⁴ in the α-chain and Cys⁹³ and 112 in the β-chain. The full-length spectra of in un-digested Hb confirmed this binding pattern. There was no reaction with N-acetyl-l-lysine at physiological pH. The adducted peptides were possible to measure using LC/MS/MS in selected reaction monitoring mode. These peptides may be used for biological monitoring of exposure to ECA, MMA and HEMA.     

Immobilization of laccase onto modified PU/RC nanofiber via atom transfer radical polymerization method and application in removal of bisphenol A

In this study, 2‐hydroxyethyl methacrylate (HEMA) was used as the monomers for surface grafting on electrospun PU/RC nanofiber membrane via atom transfer radical polymerization (ATRP) method, and the PU/RC‐poly(HEMA) nanofiber membrane was investigated as a carrier for LAC. Free and immobilized LAC was characterized, and efficiency of bisphenol A (BPA) removal was determined. The results indicated that the PU/RC‐poly(HEMA)‐LAC showed relatively higher pH stability, temperature stability, and storage stability than free and PU/RC‐LAC; moreover, more than 60% of the PU/RC‐poly(HEMA)‐LAC activity was retained after 10 cycles of ABTS treatment. Notably, the BPA removal efficiency of PU/RC‐poly(HEMA)‐LAC membrane generally ranged from 87.3 to 75.4% for the five cycles. Therefore, the PU/RC‐poly(HEMA) nanofiber membrane has great potential as a carrier for the LAC immobilization for various industrial applications and bioremediation.     

Poly(HEMA) brushes emerging as a new platform for direct detection of food pathogen in milk samples

Surface plasmon resonance (SPR) biosensors capable of in real time detection of Cronobacter at concentrations down to 10? cells mL?1 in samples of consumer fresh-whole fat milk, powder whole-fat milk preparation, and powder infant formulation were developed for the first time. Antibodies against Cronobacter were covalently attached onto polymer brushes of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) grafted from the SPR chip surface. The lowest detection limit, 10? cells mL?1, was achieved in phosphate buffered saline (pH 7.4) with sensors prepared by covalent immobilization of the same antibodies onto a self assembled monolayer (SAM) of hexa(ethylene glycol) undecanethiol (EG?). However, when the EG? based sensors were challenged with milk samples the non-specific response due to the deposition of non-targeted compounds from the milk samples was much higher than the specific response to Cronobacter hampering the detection in milk. Similar interfering fouling was observed on antifouling polymer brushes of hydroxy-capped oligoethylene glycol methacrylate and even a 10 times higher fouling was observed on the widely used SAM of mixed hydroxy- and carboxy-terminated alkanethiols. Only poly(HEMA) brushes totally suppressed the fouling from milk samples. The robust well-controlled surface initiated atom transfer radical polymerization of HEMA allowed the preparation of highly dense brushes with a minimal thickness so that the capture of antigens by the antibodies immobilized on the brush layer could take place close to the gold SPR surface to provide a stronger optical response while the fouling was still suppressed. A minimum thickness of 19 nm of poly(HEMA) brush layer was necessary to suppress completely non-specific sensor response to fouling from milk.     

DNA-damage, cell-cycle arrest and apoptosis induced in BEAS-2B cells by 2-hydroxyethyl methacrylate (HEMA)

The methacrylate monomer 2-hydroxyethyl methacrylate (HEMA) is commonly used in resin-based dental restorative materials. These materials are cured in situ and HEMA and other monomers have been identified in ambient air during dental surgery. In vitro studies have demonstrated a toxic potential of methacrylates, and concerns have been raised regarding possible health effects due to inhalation. In this study we have investigated the mechanisms of HEMA-induced toxicity in the human lung epithelial cell line BEAS-2B. Depletion of cellular glutathione (GSH) and an increased level of reactive oxygen species (ROS) were seen after 2h of exposure, but the levels were restored to control levels after 12h. After 24h, inhibited cell proliferation and apoptotic cell death were found. The results of the Comet assay and the observed phosphorylation of DNA-damage-associated signalling proteins including Chk2, H2AX, and p53 suggest that the toxicity of HEMA is mediated by DNA damage. Further, the antioxidant trolox did not counteract the HEMA-induced cell-cycle arrest, which indicates that the DNA damage is of non-oxidative origin.     

Rapid deswelling response of poly(N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) hydrogels

Ternary poly( N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) (PNIPAAm/PROZO/PHEMA) hydrogels were prepared by the free-radical copolymerization of N-isopropylacrylamide (NIPAAm), 2-hydroxyethyl methacrylate (HEMA), and poly(2-alkyl-2-oxazoline) (PROZO) multifunctional macromonomers. The resulting polymeric materials were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), as well as by equilibrium swelling experiments. All synthesized hydrogels display temperature sensitivity in the 28-38 degrees C range. A high rate of response was registered as compared to that of materials based only on PNIPAAm. The swelling-deswelling peculiar behavior was related to the chemical composition (hydrophile/hydrophobe balance), the length of the inserted PROZO sequence, and inner morphology, an aspect which points on its possible control by synthesis. It was evidenced that the architecture of the resulting porous materials has a high order degree, emerging from the self-assembling of the microgel particles, which provided numerous, nearly uniform, large water release channels.     

Dental methacrylates may exert genotoxic effects via the oxidative induction of DNA double strand breaks and the inhibition of their repair

Methacrylate monomers used in dentistry have been shown to induce DNA double strand breaks (DSBs), one of the most serious DNA damage. In the present work we show that a model dental adhesive consisting of 45% 2-hydroxyethyl methacrylate (HEMA) and 55% bisphenol A-diglycidyl dimethacrylate (Bis-GMA) at concentrations up to 0.25 mM Bis-GMA induced oxidative DNA in cultured primary human gingival fibroblasts (HGFs) as evaluated by the comet assay and probed with human 8-hydroxyguanine DNA-glycosylase 1. HEMA/Bis-GMA induced DSBs in HGFs as assessed by the neutral comet assay and phosphorylation of the H2AX histone and sodium ascorbate or melatonin (5-methoxy-N-acetyltryptamine) both at 50 μM reduced the DSBs, they also inhibited apoptosis induced by HEMA/Bis-GMA. The adhesive slowed the kinetics of the repair of DNA damage induced by hydrogen peroxide in HGFs, while sodium ascorbate or melatonin improved the efficacy of H(2)O(2)-induced damage in the presence of the methacrylates. The adhesive induced a rise in the G2/M cell population, accompanied by a reduction in the S cell population and an increase in G0/G1 cell population. Sodium ascorbate or melatonin elevated the S population and reduced the G2/M population. In conclusion, HEMA/Bis-GMA induce DSBs through, at least in part, oxidative mechanisms, and these compounds may interfere with DSBs repair. Vitamin C or melatonin may reduce the detrimental effects induced by methacrylates applied in dentistry.     

Adsorption of gamma-globulin, a model protein for antibody, on colloidal particles

The effect of surface properties on the adsorption of bovine gamma-globulin, a model protein for antibody, was studied. Polystyrene latex (PS), hydrophilic copolymer lattices of styrene/2-hydroxyethyl methacrylate [P(S/HEMA)], styrene/ methacrylic acid [P(S/MAA)] and methyl methacrylate/ 2-hydroxyethyl methacrylate [P(MMA/HEMA)], and colloidal silica were used. The adsorption isotherms of gamma-globulin on these colloidal particles were measured as a function of pH and ionic strength. The hydrophilic particles showed low affinities for gamma-globulin at alkaline pH, while PS showed high affinities for gamma-globulin over the whole range of pH and ionic strength. The gamma-globulin adsorption on hydrophilic particles was highly reversible with respect to the pH and ionic strength compared with that on PS. These differences indicate that the dominant driving forces of adsorption are related to the hydrophilicity of particles. The adsorption isotherms of all colloidal particles showed the plateau values, and the order of maximum values of plateau adsorption was P(S/MAA) > PS or P(S/HEMA), silica > P(MMA/HEMA). Thus, they were also affected by the charged groups and the hydrophilicity of the surfaces. On the other hand, the plateau values of all colloidal particles were more or less symmetrical with a maximum at around the isoelectric point of gamma-globulin at an ionic strength of 0.01. This behavior is attributed to the important role of the lateral interaction between the adsorbed molecules at low ionic strength.     

Sensitization Potential of Dental Resins: 2-Hydroxyethyl Methacrylate and Its Water-Soluble Oligomers Have Immunostimulatory Effects

The immunostimulatory effects of the representative dental resin monomer 2-hydroxyethyl methacrylate (HEMA), a HEMA derivative that does not contain a double bond (2-hydroxyethyl isobutyrate, HEIB), and polymerized water-soluble oligomers of HEMA (PHEMA) were investigated. It is known that expression levels of either or both of CD54 and CD86 in THP-1 cells are increased by exposure to sensitizing substances. In this study, the expression levels of CD54 and CD86, the production of reactive oxygen species (ROS), and the viability of the cells were measured after 24 h of incubation with these materials at different concentrations. The concentrations of the materials that induced the expression of both CD54 and CD86 were low in the following order: NiSO₄, HEMA, and methyl methacrylate (MMA). These results indicate that these dental resin monomers have lower sensitizing potentials than NiSO₄. Although HEIB, which lacks a double bond, resulted in negligible ROS production and reduced cytotoxicity than HEMA, it induced the expression of CD54 and CD86. Comparison of the results for HEMA and HEIB indicates that dental resin monomer-induced sensitization may be related not only to the oxidative stress related to the methacryloyl group but also to the structures of these compounds. Of particular interest is the result that a water-soluble PHEMA oligomer with a relatively high-molecular weight also exhibited negligible cytotoxicity, whereas the expression level of CD54 increased after exposure to PHEMA at a high concentration. This result serves as a warning that polymerized substances also have the potential to induce sensitization. This study provides insight into the nature of allergic responses to dental resin materials in clinical use and may facilitate the development of more biocompatible restorative materials in the future.     

Fabrication and characterization of tosyl‐activated magnetic and nonmagnetic monodisperse microspheres for use in microfluic‐based ferritin immunoassay

This article describes the preparation of tosyl‐activated nonmagnetic poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) [P(HEMA‐GMA)] microspheres by dispersion polymerization and tosyl‐activated magnetic poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) [P(HEMA‐EDMA)] microspheres by multistep swelling polymerization method and precipitation of iron oxide inside the pores. These new approaches show that monodisperse microspheres, 2.3 µm, respectively 4.1 µm, in diameter can be produced in high yields avoiding aggregation and with the advantage of being free of aromatic moieties. To demonstrate their potential for diagnostic applications, both types of microparticles have been coated with capture and detection antibodies (DAs), respectively. Immunoassay protocols have then been developed for the dosage of ferritin using an automated affinity platform combining microchannel chips and electrochemical detection. The assay performance using the above magnetic microspheres has been compared with that obtained with commercial tosyl‐activated beads. Finally, the possibility to combine functionalized magnetic and nonmagnetic microspheres has been evaluated in view of amplifying the number of enzymatic labels in the immuno‐complex. At a ferritin concentration of 119.6 ng/mL, a signal‐to‐noise ratio of 150.5 is obtained using 0.2 mg/mL of anti‐ferritin‐coated P(HEMA‐GMA)‐DA microspheres against a value of 158.8 using free DA in solution. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 532–542, 2013     

Optimization of capillary coating by hydroxyethyl methacrylate for capillary zone electrophoresis of proteins

This work describes further improvements of coating fused silica capillaries with 2-hydroxyethyl methacrylate (HEMA) by atom transfer radical polymerization (ATRP). First, endcapping with a sterically less bulky silanyl reagent reduces the electrosmotic flow (EOF) by 25% in addition to the 40% EOF reduction caused by HEMA coating compared to a bare fused silica capillary. An additional hydrolysis step was introduced into the preparation of HEMA coated capillaries and leads to better reproducible migration times. The influence of the solvent during ATRP and the resulting polymer coating was investigated by replacement of DMF with water or water-methanol mixtures. The quality of the optimized coating was characterized by protein separations at pH 3. HEMA coated capillaries reveal up to 746000 plates. The polyvinyl alcohol (PVA) coated capillary provides only half of this efficiency. A long-term test at pH 9 shows good stability of the HEMA coated capillaries in basic medium. Also the numbers of plates in this medium was about 30% higher than for separations with the PVA capillary. In addition, the phosphate buffer was replaced by a volatile ammonium acetate buffer for later use with mass spectrometry (MS).