Graft copolymerization of methyl methacrylate onto Bombyx mori initiated by semiconductor-based photocatalyst

Methyl methacrylate (MMA) was graft copolymerized onto Bombyx mori fibre (natural silk). The graft copolymerization was carried out by photopolymerization of MMA using semiconductor particles (CdS) as photocatalyst in the presence of visible light. The effect of additives like triethylamine (Et(3)N) and ethylene glycol on graft copolymerization was studied. We have achieved 2-10% graft conversion with 10-20% homopolymer formation. After removal of the homopolymer, the graft copolymer (grafted fibre) was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC). The chemical resistance of grafted fibre was compared with virgin one.     

Graft copolymerization of methyl acrylate onto pullulan using ceric ammonium nitrate as initiator

Water absorption resins of pullulan graft methyl acrylate (PU-g-MA) using ceric ammonium nitrate (CAN) as an initiator has been investigated under nitrogen atmosphere in aqueous medium. The percentage grafting (%PG) is favoured by increasing reaction time but is affected by higher concentration of initiator and monomer, and high temperature. Experiments showed that the optimal conditions for grafting were: [CAN] = 0.004 mol/l which was added in 1 mol/l nitric acid; [MA] = 0.0465 mol/l; reaction time; 180 min and temperature, 40 °C. The graft copolymer was analyzed by infrared spectroscopy. The water absorption capacity of the resins decreased significantly with the increase in %PG.     

Graft copolymers of xyloglucan and methyl methacrylate

Xyloglucan, a water-soluble food grade polysaccharide, was reported as a substrate for graft copolymerization of methyl methacrylate (MMA). Grafting PMMA (polymethyl methacrylate) with xyloglucan (XG) makes a new material with improved thermal stability and shelf life without affecting its hydrophilicity. XG was isolated from tamarind seed mucilage by aqueous extraction. Grafting of MMA was initiated by ceric ion in aqueous medium under N₂ atmosphere and the progress of the reaction was monitored gravimetrically by varying different reaction parameters. Grafting of MMA onto XG was confirmed by FTIR spectroscopy, NMR spectroscopy, differential scanning calorimetric (DSC) studies, thermal gravimetric analysis (TGA) studies and scanning electron micrographs (SEMs). This material might find potential to be used in drug delivery systems.     

Graft copolymerization of amino acids onto partially deacetylated chitin

Novel graft copolymers have been synthesized by the reaction of N-carboxyanhydrides of amino acids with partially deacetylated chitins. The graft copolymers had different swelling ability from the original chitin.     

Graft copolymerization of glycerol 1,3-diglycerolate diacrylate onto poly(3-hydroxyoctanoate) to improve physical properties and biocompatibility

Glycerol 1,3-diglycerol diacrylate-grafted poly(3-hydroxyoctanoate) (GDD-g-PHO) copolymers were prepared by heating homogeneous solutions of PHO, GDD monomer and benzoylperoxide initiator. Experiments showed that GDD was successfully grafted onto the PHO chains and that the resulting copolymers had enhanced thermal properties and mechanical strengths. The surfaces and the bulk of GDD-g-PHO copolymers became more hydrophilic as the GDD grafting density in the copolymer increased. Measurements of the growth of Chinese hamster ovary cells and the adsorption of blood proteins and platelets in vitro showed that biocompatibility was also enhanced by grafting of GDD groups. These results indicate that the GDD-g-PHO copolymers are promising materials for biocompatible biomedical applications.     

Graft copolymerization of ethylacrylate onto xanthan gum, using potassium peroxydisulfate as an initiator

Graft copolymer of xanthan gum (XG) and ethylacrylate (EA) has been synthesized by free radical polymerization using potassium peroxydisulfate (KPS) as an initiator in an air atmosphere. The grafting parameters, i.e. grafting ratio and efficiency decrease with increase in concentration of xanthan gum from 0.050 mg/25 mL to 0.350 mg/25 mL, but these grafting parameters increase with increase in concentration of ethylacrylate from 9 × 10⁻² to 17 × 10⁻² ML⁻¹, and KPS from 15 × 10⁻³ to 35 × 10⁻³ ML⁻¹. The graft copolymer has been characterized by FTIR, XRD, TGA and SEM analysis. The grafted copolymer was also evaluated as efficient Zn²⁺ metal binder. The grafted copolymer shows improvement in the stability, solubility as well as their sorbing capacity. Thus graft copolymer formed could find applications in metal ion removal and in drug delivery.     

Graft copolymerization of ethyl acrylate onto cellulose using ceric ammonium nitrate as initiator in aqueous medium

Ceric ammonium nitrate (CAN) in the presence of nitric acid has been used as efficient initiator for graft copolymerization of the ethyl acrylate onto cellulose at 35.0 +/- 0.1 degrees C. Graft copolymerization of ethyl acrylate onto cellulose has taken place through the radical initiation process. The graft yield and other grafting parameters have been evaluated by varying concentration of ethyl acrylate from 2.5 x 10(-1) to 15.0 x 10(-1) mol dm(-3) and ceric ammonium nitrate from 5.0 x 10(-3) to 25.0 x 10(-3) mol dm(-3) at constant concentration of the nitric acid (8.0 x 10(-2) mol dm(-3)). The rate of graft copolymerization has shown 1.5 order with respect to the concentration of the ceric ammonium nitrate. The graft copolymerization data obtained at different temperatures were used to calculate the energy of activation, which has been found to be 28.9 kJ mol(-1) within the temperature range from 20 to 50 degrees C. The effect of addition of cationic and anionic surfactants on graft copolymerization has also been studied. On the basis of the experimental observations, reaction steps have been proposed and a suitable rate expression for graft copolymerization has been derived.     

Graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose and study of its swelling, metal ion sorption and flocculation behaviour

The present paper reports the graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose by free radical polymerization using potassium peroxymonosulphate/thiourea redox system in an inert atmosphere. The reaction conditions for maximum grafting have been optimized by varying the reaction variables, including the concentration of N-vinylformamide (12.0 × 10⁻²–28.0 × 10⁻² mol dm⁻³), potassium peroxymonosulphate (4.0 × 10⁻³–12.0 × 10⁻³ mol dm⁻³), thiourea (1.2 × 10⁻³–4.4 × 10⁻³ mol dm⁻³), sulphuric acid (2.0 × 10⁻³–10.0 × 10⁻³ mol dm⁻³), sodium carboxymethylcellulose (0.2–1.8 g dm⁻³) along with time duration (60–180 min) and temperature (25–45° C). Water swelling capacity, metal ion sorption and flocculation studies of synthesized graft copolymer have been performed with respect to the parent polymer. The graft copolymer has been characterized by FTIR spectroscopy and thermogravimetric analysis.     

Improvement of decay resistance of wood via combination treatment on wood cell wall: Swell-bonding with maleic anhydride and graft copolymerization with glycidyl methacrylate and methyl methacrylate

Poplar wood (Populus ussuriensis Kom) was modified by a novel combined two-step treatment to improve its decay resistance. Maleic Anhydride (MAN) was first employed to swell and bond to wood cell wall, and then mixed monomers of glycidyl methacrylate/methyl methacrylate (GMA/MMA) were used to graft copolymerization within wood cell lumen. The swelling and bonding of cell wall by MAN, interfacial compatibility between resultant polymer from GMA/MMA monomers and wood cell wall, and decay resistance of all composites were tested and analyzed by Scanning electron microscopy–Energy dispersive X-ray (SEM–EDX), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) apparatus. The results indicate that the volume of poplar wood treated by MAN swells about 9% with about 15% of weight percent gain, and MAN chemically bonds to the cell wall through substitution reaction with hydroxyl group, and the grafting adduct mainly remains as an amorphous form. The resultant Poplar-MAN shows improved decay resistance of 69.79% against brown fungus (Gloeophyllum trabeum (Pers. ex Fr.) Murr.) and 81.42% against white fungus (Phanerochaete chrysosporium Burdsall.) over those of untreated Poplar, respectively. After the combined two-step treatment, GMA and MMA are copolymerized within wood cell lumen, and the resultant polymer is also grafted onto wood cell wall, resulting in the improvement of interfacial compatibility between polymer and wood substance without obvious gaps. The decay resistance of the resultant composite from the combined two-step treatment against the brown decay fungus and the white decay fungus is improved by 97.64% and 99.17%, respectively, compared with those of untreated poplar wood; and also more excellent than those of MMA treated wood, GMA/MMA monomers treated wood, organic 3-Iodo-2-Propynyl Butyl Carbamate (IPBC) treated wood and inorganic boron compounds treated wood, respectively.     

Fatty acids. part 43. The preparation and properties of some methyl dimercaptostearates and of some related methyl epithio-and epidithiostearates

The methods described for converting mesyloxy esters to mercapto esters (see previous paper) have been applied to appropriate dimesyloxy derivatives as a route to the 9,10; 10,12 and 9,12-dimercapostearates. Some reactions furnish epithio and epidithio esters in place of mercapto esters. The dithiols are converted to acetyl, trifluoroacetyl, and isopropylidene derivatives. The products are identified mainly by infrared, nuclear magnetic resonance, and mass spectroscopic procedures.     

Fatty acids. part 42 The preparation and properties of methyl monomercaptostearates. some related thiols, and some methyl epithiostearates

Some saturated and unsaturated mercapto C₁₈ esters have been obtained for the first time. Such compounds are prepared from hydroxy esters via their mesyloxy derivatives by reaction with sodium hydrogen sulphide or with potassium thioacetate (followed by deacetylation) or from alkene esters by radical addition of thioacetic acid. The mercapto esters are readily identified by infrared, nuclear magnetic resonance, and mass spectroscopic procedures, preferably after acetylation or trifluoroacetylation.γ-Mesyloxy alkenes furnish tetrahydrothiophen rather than mercapto alkenes and methyl 9,12-epithiostearate was synthesised by an independent route from thiophen.     

The preparation and some physical properties of ten methyl dithiastearate isomers

Ten methyl dithiastearate isomers, containing 0-4 methylene groups between the two sulfur atoms in each of the molecules, were synthesized using a one-pot synthesis approach. The preparation of the tetra-methylene (3,4), tri-methylene (5,6) and di-methylene (7,8) interrupted methyl dithiastearate isomers involved the asymmetric coupling of n-bromoalkanes, alkanedithiols and omega-bromoalkanoic acids. The mono-methylene interrupted isomers (9,10) were prepared from dibromethane, which was allowed to couple with n-alkanethiols and omega-mercaptoalkanoic acids. For the non-methylene interrupted isomers (11,12), n-alkanethiols were initially converted to the sulfenyl bromide and reacted with omega-mercaptoalkanoic acids. These sulfur-containing fatty ester analogues were found to be more polar and with longer retention times than methyl stearate when analyzed by TLC (silica) and GC (SE-30) respectively. In the 1H-NMR analysis the shifts of the protons of CH2 groups adjacent to the sulfur atoms in 3-6 appeared at 2.50-2.60 (t) delta, while the tri-methylene interrupted isomers (5,6) furnished an additional characteristic signal at 1.84 (quintet) delta arising from the protons of the beta-positioned CH2 between the sulfur atoms. Compounds 7-8 gave a singlet at 2.70 delta, while 9,10 also gave a singlet at 3.64-3.65 delta for the protons of the CH2 group situated between the sulfur atoms. In compounds 11,12 the shift of the protons of the CH2 adjacent to the sulfur atom appeared at 2.68 (t) delta.(ABSTRACT TRUNCATED AT 250 WORDS)     

Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

Fabrication of DNA microarrays onto poly(methyl methacrylate) with ultraviolet patterning and microfluidics for the detection of low-abundant point mutations

We have developed a simple ultraviolet (UV)-photomodification protocol using poly(methyl methacrylate) and polycarbonate to produce functional scaffolds consisting of carboxylic groups that allow covalent attachment of amine-terminated oligonucleotide probes to these surface groups through carbodiimide coupling. Use of the photomodification procedure coupled to microfluidics allowed for the rapid generation of medium-density DNA microarrays. The method reported herein involves the use of poly(dimethylsiloxane) microchannels reversibly sealed to photomodified poly(methyl methacrylate) surfaces to serve as stencils for patterning the oligonucleotide probes. After array construction, the poly(dimethylsiloxane) stencil is rotated 90 degrees to allow interrogation of the array using microfluidics. The photomodification process for array fabrication involves only three steps: (1) broadband UV exposure of the polymer surface, (2) carbodiimide coupling of amine-terminated oligonucleotide probes to the surface (via an amide bond), and (3) washing of the surface. The density of probes attached to this activated surface was found to be approximately 41pmolcm(-2), near the steric-saturation limit for short oligonucleotide probes. We demonstrate the use of this procedure for screening multiple KRAS2 mutations possessing high diagnostic value for colorectal cancers. A ligase detection reaction/universal array assay was carried out using parallel detection of two different low-abundant DNA point mutations in KRAS2 oncogenes with the allelic composition evaluated at one locus. Four zip code probes immobilized onto the poly(methyl methacrylate) surface directed allele-specific ligation products containing mutations in the KRAS2 gene (12.2D, 12.2A, 12.2V, and 13.4D) to the appropriate address of a universal array with minimal amounts of cross-hybridization or misligation.     

Modeling the spontaneous initiation of the polymerization of methyl methacrylate

The mechanism of the spontaneous initiation of the polymerization of methyl methacrylate (MMA) was investigated theoretically. The six minimum energy paths (MEP) of the possible reactions were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional and 6-31G* basis set. The Diels-Alder initiation mechanism (path (I) and path (II)) with remarkably high energy barriers is not applicable to MMA. Four favorable paths were found (path (III), path (IV), path (V) and path (VI)), which are supporting the Flory mechanism. Path (V) has the lowest active energy. Therefore this path is considered as the main path for the spontaneous polymerization of MMA. Figure The mechanism of the spontaneous initiation of the polymerization of methyl methacrylate (MMA) was investigated theoretically. The six minimum energy paths (MEP) of the possible reactions were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional and 6-31G* basis set.     

黄原胶与丙烯酰胺接枝共聚反应的研究

以过硫酸铵为引发剂,在N2气保护下,研究了黄原胶(XG)与丙烯酰胺(AM)的接枝共聚反应.考察了单体浓度、引发剂浓度、反应温度和反应时间等因素对接枝率及接枝效率的影响,探讨了过硫酸铵引发黄原胶接枝丙烯酰胺共聚反应的基本规律.采用红外光谱(FT-IR)、X射线粉末衍射(XRD)对接枝共聚物的结构进行研究,用热重分析(TGA)法表征了产物的热性能,并初步探讨了接枝机理.     

The effect of suppressors on the resulting segregation ratios of some characters of barley in higher hybrid generations

1. 1.
   V reciprokých k?í?eních kombinací některých odr?d je?mene byly zji?těny potla?ující faktory pro projev recesivní i dominantní alternativy těchto znak?: ?adovost klasu, pluchatost zrna, charakter osin a utvá?ení báze klasu.     
   
   

Effect of methyl methacrylate on mitochondrial function and structure

• 1.1. Treatment of isolated rat liver mitochondria with methyl methacrylate (MM) produced membrane disruption as evidenced by the release of citrate synthase, and changes in the ultrastructure of mitochondria.
• 2.2. At concentration 0.1%, MM uncoupled oxidative phosphorylation as evidenced by stimulation of state 4 respiration supported either by pyruvate plus malate or succinate (+rotenone) and ATP-ase activity in intact mitochondria.
• 3.3. At concentration 1% MM stimulated ATP-ase activity in intact mitochondria and succinate (+rotenone) oxidation at state 4 and was without effect on this substrate oxidation at state 3.
• 4.4. MM inhibited pyruvate plus malate oxidation either at state 3 or in the presence of uncoupling agents.
• 5.5. MM inhibited the NADH oxidase of electron transport particles at a concentration which failed to inhibit either succinic oxidase or the NADH-ferricyanide reductase activity.
• 6.6. The data presented suggest that in the isolated mitochondria MM inhibits NADH oxidation in the vicinity of the rotenone sensitive site of complex I.
• 7.7. The general conclusion is that MM may block an electron transport and to uncouple oxidative phosphorylation in rat liver mitochondria. The overall in vitro effect would be to prevent ATP synthesis which could result in cell death under in vivo conditions.

     

Molecular Mobility in Poly(butyl methacrylate) and Poly(methyl methacrylate)

Molecular mobility is studied in poly(butyl methacrylate) and poly(methyl methacrylate) (PMMA) with molecular dynamics simulations in order to understand the effect of the α–β crossover on the β relaxation activation energy and co-operativity. In the high frequency range investigated, the estimated β process activation energy is decreased as compared to the low frequency value. This deviation is stronger in poly(n butyl methacrylate) (PnBMA) than in PMMA. The intra-molecular co-operativity related to the β process is also higher in PnBMA than in PMMA. These results could be related to the relative position of the simulation temperature range and of the extrapolated α–β crossover temperature.