Fate of aflatoxins B1 and G1 residues during biscuit processing

Effect of biscuit processing on the destruction of aflatoxins B₁ and G₁ with and/or without some commonly leavening agents used namely sodium bicarbonate, ammonium bicarbonate and sodium bisulfite and sodium chloride. It was found that mixing step reduced the concentration of aflatoxins B₁ and G₁ by 80.7% and 82.7%, while the effect of baking step being 28.9% and 21.5%. The effect of mixing was found to be more pronounced than that baking step. The highest destruction effect on aflatoxin B1 was observed by adding a mixture composed of sodium and ammonium bicarbonate and sodium bisulfite followed by sodium chloride, sodium bisulfite, ammonium bicarbonate and/or sodium bicarbonate alone, where the reduction values of toxin after mixing were 93.4,91.9,91.7, 88.8 and 86.6% respectively, while the baking effect ranged 17.2 to 34.5% in the presence of different leaving agents added. Concerning aflatoxin G1; the highest destructive effect of toxin was adsorbed by adding a mixture of sodium and ammonium bicarbonate and sodium bisulfite followed by sodium bisulfite, sodium chloride, ammonium bicarbonate and/or sodium bicarbonate alone since the destruction values of such toxin after mixing were 96.2%, 92.8%, 92.6%, 89.0% and 87.7% respectively, while the baking effect ranged 20.9 to 34.5% in all leavening agents added.     

The recovery of poly(3-hydroxybutyrate) by using dispersions of sodium hypochlorite solution and chloroform

Summary To take advantage of both differential digestion by hypochlorite and solvent extraction, we used dispersions of sodium hypochlorite solution and chloroform in the recovery of microbial PHB. The treatment with hypochlorite alone caused such severe degradation and the molecular weight decreased drastically with increasing hypochlorite concentration. However, using the dispersion, the degradation of PHB was markedly diminished owing to theshielding effect of chloroform. In this case, we could obtain PHB of above 97% purity with a number average molecular weight of 1,000,000 comparable to the original molecular weight of 1,200,000.     

Optimization of microbial poly(3-hydroxybutyrate) recover using dispersions of sodium hypochlorite solution and chloroform

Optimization was carried out for the recovery of microbiol poly(3-hydroxybutyrate) (PHB) from Alcaligenes eutrophus. This process involved the use of a dispersion made of sodium hypochlorite solution and chloroform. The dispersion enabled us to take advantage of both differential digestion by hypochlorite and solvent extraction by chloroform. The PHB recovery (%) from cell powder was maximized using a 30% hypochlorite concentration, a 90-min treatment time, and a 1:1 (v/v) chloroform-to-aqueous-phase ratio. Under these optimal conditions, the recovery was about 91% and the purity of recovered PHB was higher than 97%. The number average molecular weight, M(n) of recovered PHB was about 300,000 and the weight average molecular weight M(w) was about 1,020,000, compared to the original M(n) of 530,000 and M(w) of 1,272,000. The moderate decrease in both M(n) and M(w) might be ascribed to the shielding effect of chloroform. In addition, the relatively small decrease in M(w) probably resulted from the loss of short PHB chains which might be water soluble. The crystallinity of recovered PHB was in the range of 60 to 65%although a slightly higher crystallinity was observed when the dispersion was used. (c) 1994 John Wiley & Sons, Inc.     

Recovery and characterization of poly(3-hydroxybutyric acid) synthesized in Alcaligenes eutrophus and recombinant Escherichia coli.

We studied recovery of poly(3-hydroxybutyric acid) (PHB) from Alcaligenes eutrophus and a recombinant Escherichia coli strain harboring the A. eutrophus poly(3-hydroxyalkanoic acid) biosynthesis genes. The amount of PHB degraded to a lower-molecular-weight compound in A. eutrophus during the recovery process was significant when sodium hypochlorite was used, but the amount degraded in the recombinant E. coli strain was negligible. However, there was no difference between the two microorganisms in the patterns of molecular weight change when PHB was recovered by using dispersions of a sodium hypochlorite solution and chloroform. To understand these findings, we examined purified PHB and lyophilized cells containing PHB by using a differential scanning calorimeter, a thermogravimetric analyzer, and nuclear magnetic resonance. The results of our analysis of lyophilized whole cells containing PHB with the differential scanning calorimeter suggested that the PHB granules in the recombinant E. coli strain were crystalline, while most of the PHB in A. eutrophus was in a mobile amorphous state. The stability of the native PHB in the recombinant E. coli strain during sodium hypochlorite treatment seemed to be due to its crystalline morphology. In addition, as determined by the thermogravimetric analyzer study, lyophilized cell powder of the recombinant E. coli strain containing PHB exhibited greater thermal stability than purified PHB obtained by chloroform extraction. The PHB preparations extracted from the two microorganisms had identical polymer properties.     

用SDS．NaClO从重组大肠杆菌中分离聚-β-羟基丁酸酯

聚β羟基丁酸酯（ＰＨＢ）是微生物合成的一种以颗粒状态存在于细胞中的高分子聚合物,由于它具有生物可降解性、生物相容性等特性,在医学上具有独特而广阔的应用前景。从微生物细胞中分离ＰＨＢ的方法有溶剂萃取法［１］、化学试剂法［２４］和酶法［５］。目前工...     

Poly(β-hydroxybutyrate) production by a moderate halophile,Halomonas boliviensis LC1

The moderate halophile Halomonas boliviensis, isolated from a Bolivian saline soil sample, was able to accumulate poly(β-hydroxybutyrate) (PHB) when grown under conditions of nutrient limitation and excess carbon source. The concentration of sodium chloride in the medium influenced the cell-growth, -size, and rate of PHB accumulation. Cultivation in shake flasks led to a PHB accumulation of about 54 wt.% with respect to cell dry weight at 4.5% (w/v) NaCl in a medium with butyric acid and sodium acetate as carbon sources. The production of PHB was substantially improved to a maximum value of 88 wt.% during cultivation under controlled conditions of pH and oxygen concentration in a fermentor. The use of glucose and sucrose, respectively, as carbon source could also lead to the production of PHB at an average level of 55 wt.%.     

Utilization of agricultural residues for poly(3-hydroxybutyrate) production by Halomonas boliviensis LC1

Aims: Utilization of cheap and readily available agricultural residues as cheap carbon sources for poly(3‐hydroxybutyrate) (PHB) production by Halomonas boliviensis. Methods and Results: Wheat bran was hydrolysed by a crude enzyme preparation from Aspergillus oryzae NM1 to provide a mixture of reducing sugars composed mainly of glucose, mannose, xylose and arabinose. Growth of H. boliviensis using a mixture of glucose (0·75% w/v) and xylose (0·25% w/v) in the medium led to a PHB content and concentration of 45 wt% and 1 g l^?1, respectively, after 30 h. A similar PHB concentration was attained when H. boliviensis was grown on wheat bran hydrolysate but with a lower PHB content, 34 wt%. In a batch cultivation mode in a fermentor, using 1·8% (w/v) reducing sugars, the maximum PHB accumulation by H. boliviensis was attained in 20 h, but was reduced to about 30 wt%. By adding butyric acid (0·8% v/v), sodium acetate (0·8% w/v) and decreasing the reducing sugars concentration to 1·0% w/v in the medium, PHB accumulation and concentration were increased to 50 wt% and 4 g l^?1, respectively, after 20 h. Butyric acid and sodium acetate for PHB production could also be provided by anaerobic digestion of solid potato waste. Conclusions: Cheap and readily available agricultural residues can be used as substrates to produce PHB. The production of PHB by H. boliviensis using wheat bran hydrolysate as source of carbon is expected to reduce the production cost and motivates further studies. Significance and Impact of the Study: Large‐scale commercial utilization of PHB is mainly hampered by its high production cost. Carbon source for PHB production accounts up to 50% of the total production costs. Thus, the use of waste agricultural residues can substantially reduce the substrate cost (and in turn even provide value to the waste), and can downsize the production costs. This improves the market competitiveness. Studies on PHB production by moderate halophiles were recently initiated with H. boliviensis and findings show that it has potential for commercial exploitation. PHB production by H. boliviensis using wheat bran and potato waste is hence interesting.     

Purification of polyhydroxybutyrate synthase from its native organism, Ralstonia eutropha: implications for the initiation and elongation of polymer formation in vivo

Class I polyhydroxybutyrate (PHB) synthase (PhaC) from Ralstonia eutropha catalyzes the formation of PHB from (R)-3-hydroxybutyryl-CoA, ultimately resulting in the formation of insoluble granules. Previous mechanistic studies of R. eutropha PhaC, purified from Escherichia coli (PhaC(Ec)), demonstrated that the polymer elongation rate is much faster than the initiation rate. In an effort to identify a factor(s) from the native organism that might prime the synthase and increase the rate of polymer initiation, an N-terminally Strep2-tagged phaC (Strep2-PhaC(Re)) was constructed and integrated into the R. eutropha genome in place of wild-type phaC. Strep2-PhaC(Re) was expressed and purified by affinity chromatography from R. eutropha grown in nutrient-rich TSB medium for 4 h (peak production PHB, 15% cell dry weight) and 24 h (PHB, 2% cell dry weight). Analysis of the purified PhaC by size exclusion chromatography, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and gel permeation chromatography revealed that it unexpectedly copurified with the phasin protein, PhaP1, and with soluble PHB (M(w) = 350 kDa) in a "high-molecular weight" (HMW) complex and in monomeric/dimeric (M/D) forms with no associated PhaP1 or PHB. Assays for monitoring the formation of PHB in the HMW complex showed no lag phase in CoA release, in contrast to M/D forms of PhaC(Re) (and PhaC(Ec)), suggesting that PhaC in the HMW fraction has been isolated in a PHB-primed form. The presence of primed and nonprimed PhaC suggests that the elongation rate for PHB formation is also faster than the initiation rate in vivo. A modified micelle model for granule genesis is proposed to accommodate the reported observations.     

Peroxisomes as sites for synthesis of polyhydroxyalkanoates in transgenic plants

Bacterial genes responsible for poly(3-hydroxybutyrate) (PHB) biosynthesis were targeted to plant peroxisomes by adding a carboxy-terminal targeting sequence. The enzymes evidently were transported into peroxisomes, retained their catalytic activity, and reacted with peroxisomally available precursors because PHB synthesis in transgenic plant cells was localized to peroxisomes. Up to 2 mg/g fresh weight PHB was produced in suspension cultures of Black Mexican Sweet maize cells after biolistic transformation with three peroxisomally targeted bacterial genes. An equilibrium effect is proposed to explain the unexpected existence of (R)-3-hydroxybutyryl-CoA in plant peroxisomes.     

Prevention of interphase death in rat thymocytes by bisulfite

The effect of sodium bisulfite, a specific inhibitor of chromatin proteolysis, on radiation damage in rat thymocytes in vitro was examined. Rat thymocytes irradiated with 1 kR X rays in vitro were incubated at 37 degrees C with 10 mM glucose for 4 to 6 hr. During that time development of interphase death as judged by erythrosin B uptake, release of low molecular weight DNA (free DNA), and reduction in cell size was measured. Sodium bisulfite added to the cells at the beginning of incubation exerted a marked preventive effect on radiation damage. The effect was enhanced with increasing concentration of bisulfite from 0.25 to 2 mM. The effect of bisulfite was reversible; i.e., removal of bisulfite from the cells resulted in the reappearance of the radiation damage.     

Production of poly-\-hydroxybutyrate in Acinetobacter spp. isolated from activated sludge

Two strains of Acinetobacter sp. isolated from activated sludge actively removing phosphate were examined for their abilities to produce poly-\-hydroxybutyrate (PHB). When yield-limited by phosphate, strain RA3117 contained material that stained with Sudan Black, but contained only 0.9% PHB on a dry weight basis. This strain contained no sudanophilic material or PHB when limited by ammonia or sulphate. When strain RA3757 was limited by phosphate, ammonia or sulphate it produced 2.0, 7.8 and 11.5% PHB, respectively, on a dry weight basis. \-Ketothiolase and acetoacetyl-coenzyme A (CoA) reductase were only observed in RA3757 cell-free extracts. \-Ketothiolase was produced both in cells with and without PHB whereas acetoacetyl-CoA reductase was found only in cells accumulating PHB. When RA3757 was grown in ammonia-limiting medium with acetate, butyrate, caproate or ethanol as carbon source, similar levels of PHB were produced. When cells were grown on valerate, RA3757 produced 5.6 poly-\-hydroxyvalerate and 0.9% PHB on a dry weight basis. Correspondence to: J. W. May     

Recovery of poly(3-hydroxybutyrate) from coagulated Ralstonia eutropha using a chemical digestion method

For economic recovery of poly(3-hydroxybutyrate) (PHB) from culture broths of Ralstonia eutropha containing PHB, Al-based and Fe-based coagulants were used in the pretreatment step. The coagulated cells were then separated by centrifugation, and PHB was extracted by chemical digestion with a sodium hypochlorite/chloroform dispersion solution. The practical upper limits of dosage were found to be 1, 500 mg-Al/L and 1,000 mg-Fe/L, respectively, for Al- and Fe-based coagulants. When the harvested cells were treated with a 50% sodium hypochlorite/chloroform dispersion solution, PHB recovery and purity were 90-94% and 98-99%, respectively. The influence of the use of coagulants on the PHB recovery process was found to be insignificant. Despite the residual Al and Fe in the recovered PHB (less than 450 mg-Al/kg-PHB and 750 mg-Fe/kg-PHB, respectively), no detectable amounts of Al and Fe were leached from films made of the recovered PHB under acidic conditions. The use of Fe-based coagulants is less recommended because the Fe impurity can cause an unwanted colorization problem in the final product.     

Trade-offs between biomass growth and inducible biosynthesis of polyhydroxybutyrate in transgenic poplar

Polyhydroxybutyrate (PHB) is a bioplastic that can be produced in transgenic plants by the coexpression of three bacterial genes for its biosynthesis. PHB yields from plants have been constrained by the negative impacts on plant health that result from diversion of resources into PHB production; thus, we employed an ecdysone analogue-based system for induced gene expression. We characterized 49 insertion events in hybrid transgenic poplar (Populus tremula x alba) that were produced using Agrobacterium transformation and studied two high-producing events in detail. Regenerated plants contained up to 1-2% PHB (dry weight) in leaves after 6-8 weeks of induction. Strong induction was observed with 1-10 mm Intrepid and limited direct toxicity observed. Confocal fluorescence microscopy was used to visualize PHB granules in chloroplasts after chemical treatment to reduce autofluorescence. A greenhouse study indicated that there were no negative consequences of PHB production on growth unless the PHB content exceeded 1% of leaf weight; at PHB levels above 1%, growth (height, diameter and total mass) decreased by 10%-34%.     

Poly(3-Hydroxybutyrate) Production with High Productivity and High Polymer Content by a Fed-Batch Culture of Alcaligenes latus under Nitrogen Limitation

Alcaligenes latus has been known to produce poly(3-hydroxybutyrate) (PHB) in a growth-associated manner even under nutrient-sufficient conditions. However, the PHB content obtained by fed-batch culture was always low, at ca. 50%, which makes the recovery process inefficient. In this study, the effect of applying nitrogen limitation on the production of PHB by A. latus was examined. In flask and batch cultures, the PHB synthesis rate could be increased considerably by applying nitrogen limitation. The PHB content could be increased to 87% by applying nitrogen limitation in batch culture, which was considerably higher than that typically obtainable (50%) under nitrogen-sufficient conditions. In fed-batch culture, cells were first cultured by the DO-stat feeding strategy without applying nitrogen limitation. Nitrogen limitation was applied at a cell concentration of 76 g (dry cell weight)/liter, and the sucrose concentration was maintained within 5 to 20 g/liter. After 8 h of nitrogen limitation, the cell concentration, PHB concentration, and PHB content reached 111.7 g (dry cell weight)/liter, 98.7 g/liter, and 88%, respectively, resulting in a productivity of 4.94 g of PHB/liter/h. The highest PHB productivity, 5.13 g/liter/h, was obtained after 16 h.     

Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Recovery of Poly-beta-Hydroxybutyrate from Estuarine Microflora

Poly-beta-hydroxybutyrate (PHB) is a uniquely procaryotic endogenous storage polymer whose metabolism has been shown to reflect environmental perturbations in laboratory monocultures. When hydrolyzed for 45 min in 5% sodium hypochlorite, PHB can be isolated from estuarine detrital microflora in high yield and purified free from non-PHB microbial components. Lyophilization of frozen estuarine samples shortens the exposure time to NaOCl necessary for maximal recovery. Lyophilized samples of hardwood leaves, Vallisneria, and the aerobic upper millimeter of estuarine muds yielded PHB. The efficiency of incorporation of sodium [1-C]acetate into PHB is very high and is stimulated by aeration. PHB was not recovered from the anaerobic portions of sediments unless they were aerated for a short time. Levels of PHB in the detrital microbial community do not correlate with the microbial biomass as measured by the extractible lipid phosphate, suggesting that PHB-like eucaryotic endogenous storage materials may more accurately reflect the metabolic status of the population than its biomass.     

Acidic conditions enhance bactericidal effects of sodium bisulfite on Helicobacter pylori

BACKGROUND: The Brucella broth medium, which is often used for the cultivation of microaerobic bacteria including Helicobacter pylori. It contains sodium bisulfite to decrease oxygen content in the medium. The growth of H. pylori, however, is inhibited by sodium bisulfite. In this study, the effect of sodium bisulfite was compared with several antioxidants and quantified under acidic conditions, mimicking the gastric environment. METHODS: Growth of H. pylori in the presence of several antioxidants was evaluated at OD655 nm. Effect of sodium bisulfite on H. pylori under acidic conditions was evaluated by measuring colony forming units (cfu). RESULTS: Under neutral conditions, sodium bisulfite was a more potent suppressor of H. pylori. Resveratrol, a polyphenol found in wine, exhibited the most potent inhibitory activity. To quantify the effect of sodium bisulfite on H. pylori under acidic conditions, the bacteria were grown at 37 degrees C for 30 minutes in 0.15 mol/l HCl/KCl (pH 2.0) with or without urea and sodium bisulfite. Sodium bisulfite (0.5 mmol/l) did not affect the viability at neutral pH 7.0, however, it killed H. pylori under acidic conditions, even if urea, the key substance enabling H. pylori to survive under acidic conditions, was present. The bacteria, which had been incubated under acidic conditions in the presence of urea, could survive a subsequent 30 minute-incubation at pH 2.0 without urea. Presence of sodium bisulfite, however, in the subsequent 30 minute-incubation, killed the bacteria. CONCLUSIONS: The bactericidal effect of sodium bisulfite on H. pylori was greater under acidic conditions and independent of urease activity.     

Chemically inducible expression of the PHB biosynthetic pathway in <Emphasis Type="Italic">Arabidopsis</Emphasis>

Arabidopsis plants were transformed with a multi-gene construct for expression of the polyhydroxybutyrate (PHB) biosynthetic pathway containing a gene switch that can be activated by commercially available non-steroidal ecdysone analogs approved for use on some crops as pesticides. T(1) progeny of transgenic Arabidopsis plants were isolated and screened for PHB production in the presence of ecdysone analogs. T(2) progeny derived from selected T(1) lines were subjected to further analysis by comparing PHB production levels prior to treatment with inducing agent and 21 days after initiation of induction. Significant PHB production was delayed in many of the engineered plants until after induction. PHB levels of up to 14.3% PHB per unit dry weight were observed in young leaves harvested from engineered T(2) plants after applications of the commercial ecdysone analog Mimic. PHB in older leaves reached levels of up to 7% PHB per unit dry weight. This study represents a first step towards engineering a chemically inducible gene switch for PHB production in plants using inducing agents that are approved for field use.     

Effects of recombinant precursor pathway variations on poly[(R)-3-hydroxybutyrate] synthesis in Saccharomyces cerevisiae

Different recombinant R-3-hydroxybutyryl-CoA (3-HB) synthesis pathways strongly influenced the rate and accumulation of the biopolymer poly[(R)-3-hydroxybutyrate] (PHB) in Saccharomyces cerevisiae. It has been previously shown that expression of the Cupriavidus necator PHB synthase gene leads to PHB accumulation in S. cerevisiae [Leaf, T., Peterson, M., Stoup, S., Somers, D., Srienc, F., 1996. Saccharomyces cerevisiae expressing bacterial polyhydroxybutyrate synthase produces poly-3-hydroxybutyrate. Microbiology 142, 1169-1180]. This finding indicates that native S. cerevisiae expresses genes capable of synthesizing the correct stereochemical substrate for the synthase enzyme. The effects of variations of 3-HB precursor pathways on PHB accumulation were investigated by expressing combinations of C. necator PHB pathway genes. When only the PHB synthase gene was expressed, the cells accumulated biopolymer to approximately 0.2% of their cell dry weight. When the PHB synthase and reductase gene were co-expressed, the PHB levels increased approximately 18 fold to about 3.5% of the cell dry weight. When the beta-ketothiolase, reductase and synthase genes were all expressed, the strain accumulated PHB to approximately 9% of the cell dry weight which is 45 fold higher than in the strain with only the synthase gene. Fluorescent microscopic analysis revealed significant cell-to-cell heterogeneity in biopolymer accumulation. While the population average for the strain expressing three PHB genes was approximately 9% of the cell dry weight, some cells accumulated PHB in excess of 50% of their cell volume. Other cells accumulated no biopolymer. In addition, the recombinant strain was shown to co-produce ethanol and PHB under anaerobic conditions. These results demonstrate that the technologically important organism S. cerevisiae is capable of accumulating PHB aerobically and anaerobically at levels similar to some bacterial systems. The easily assayed PHB system also creates a convenient means of probing in vivo the presence of intracellular metabolites which could be useful for studying the intermediary metabolism of S. cerevisiae.     

Factors affecting poly-β-hydroxybutyrate accumulation in cyanobacteria and in purple non-sulfur bacteria

Abstract Spirulina maxima and Rhodopseudomonas palustris , which are known to be capable of synthesizing poly-β-hydroxybutyrate (PHB), were grown under different conditions in order to investigate the metabolic significance of PHB synthesis in phototrophic microorganisms. The intracellular concentration of PHB in S. maxima , growing photoautotrophically in batch cultures under either balanced or unbalanced (depletion of nitrogen or phosphorus in the mineral medium) conditions, was below 0.005% of cell dry weight. PHB was synthesized (up to 0.7% of dry weight) only after a prolonged period of N-starvation (although no PHB synthesis occurred when N-starvation was induced by azaserine addition) or when cells, after the exhaustion of intracellular phosphorus reserves, became P-starved. Under the latter condition, the PHB concentration reached a value of 1.2% of cell dry weight, the same figure reached in the presence of the uncoupler carbonylcyanide- m -chlorophenylhydrazone (CCCP). When photosynthetic activity was enhanced by a sudden shift of the culture to higher light intensity or when S. maxima was grown at 18°C, no PHB synthesis was detectable. Under all the photoautotrophic growth conditions tested, glycogen was much more heavily accumulated than PHB. Batch cultures of R. palustris , growing photoheterotrophically on acetate with varying nitrogen sources and regimens of nitrogen supplementation, demonstrated that some competition for reducing equivalents exists between nitrogenase activity and PHB biosynthetic pathway. The results seem to suggest that, in phototrophic bacteria able to synthesize both PHB and glycogen, the polyester acts mainly as a regulator of the intracellular reduction charge.