Stiffening the stingray skeleton - an investigation of durophagy in myliobatid stingrays (Chondrichthyes, batoidea, myliobatidae)

The stingray family Myliobatidae contains five durophagous (hard prey specialist) genera and two planktivorous genera. A suite of morphological features makes it possible for the hard prey specialists to crush mollusks and crustaceans in their cartilaginous jaws. These include: 1) flat, pavement-like tooth plates set in an elastic dental ligament; 2) multiple layers of calcified cartilage on the surface of the jaws; 3) calcified struts running through the jaws; and 4) a lever system that amplifies the force of the jaw adductors. Examination of a range of taxa reveals that the presence of multiple layers of calcified cartilage, previously described from just a few species, is a plesiomorphy of Chondrichthyes. Calcified struts within the jaw, called "trabecular cartilage," are found only in the myliobatid genera, including the planktivorous Manta birostris. In the durophagous taxa, the struts are concentrated under the area where prey is crushed, thereby preventing local buckling of the jaws. Trabecular cartilage develops early in ontogeny, and does not appear to develop as a direct result of the stresses associated with feeding on hard prey. A "nutcracker" model of jaw function is proposed. In this model, the restricted gape, fused mandibular and palatoquadrate symphyses, and asynchronous contraction of the jaw adductors function to amplify the closing force by 2-4 times.     

Functional morphology of the pharyngeal jaw apparatus in moray eels

Moray eels (Muraenidae) are a relatively large group of anguilliform fishes that are notable for their crevice-dwelling lifestyle and renowned for their ability to consume large prey. Morays apprehend their prey by biting and then transport prey by extreme protraction and retraction of their pharyngeal jaw apparatus. Here, we present a detailed interpretation of the mechanisms of pharyngeal jaw transport based on work with Muraena retifera. We also review what is known of the moray pharyngeal jaw apparatus from the literature and provide comparative data on the pharyngeal jaw elements and kinematics for other moray species to determine whether interspecific differences in morphology and behavior are present. Rather than comprising broad upper and lower processing tooth plates, the pharyngeal jaws of muraenine and uropterygiine morays, are long and thin and possess large, recurved teeth. Compared with the muraenines, the pharyngobranchials of the uropterygiines do not possess a horn-shaped process and their connection to the fourth epibranchial is dorsal rather than medial. In addition, the lower tooth plates do not exhibit a lateral groove that serves as a site of muscle attachment for the pharyngocleitheralis and the ventral rather than the lateral side of the lower tooth plate attaches to the fourth ceratobranchial. In all morays, the muscles positioned for protraction and retraction of the pharyngeal apparatus have undergone elongation, while maintaining the generalized attachment sites on the bones of the skull and axial skeleton. Uropterygiines lack a dorsal retractor muscle and we presume that retraction of the pharyngeal jaws is achieved by the pharyngocleitheralis and the esophagus. The fifth branchial adductor is greatly hypertrophied in all species examined, suggesting that morays can strongly adduct the pharyngeal jaws during prey transport. The kinematics of biting behavior during prey capture and transport resulted in similar magnitudes of cranial movements although the timing of kinematic events was significantly different and the duration of transport was twice as long as prey capture. We speculate that morays have evolved this alternative prey transport strategy as a means of overcoming gape constraints, while hunting in the confines of coral reefs.     

Apodemes associated with limbs support serial homology of claws and jaws in onychophora (velvet worms)

Although the onychophoran jaw blades are believed to be derivatives of foot claws, serial homology of these structures has not been demonstrated. To shed light on the evolutionary origin of the onychophoran jaws, we searched for morphological landmarks and compared the internal and external anatomy of jaws and distal leg portions in representatives of the two major onychophoran subgroups, the Peripatidae and Peripatopsidae. Our data revealed hitherto unknown structures associated with the onychophoran limbs, such as a soft diastemal membrane separating the anterior and posterior portions of the inner jaw blade (present only in Peripatidae), apodemes associated with feet, an eversible dorsal sac at the basis of each foot claw, and a specific arrangement of musculature associated with the sclerotised claws, jaws and their apodemes. Specific correspondences in structure and position of apodemes support serial homology of claws and jaws, suggesting that the onychophoran jaw evolved from the distal portion rather than the entire limb in the last common ancestor of Onychophora. J. Morphol. 274:1180–1190, 2013. © 2013 Wiley Periodicals, Inc.     

Anatomy and functional morphology of the feeding apparatus of the lesser electric ray, Narcine brasiliensis (Elasmobranchii: Batoidea)

Protrusion of the jaws during feeding is common in Batoidea (rays, skates, sawfishes, and guitarfishes), members of which possess a highly modified jaw suspension. The lesser electric ray, Narcine brasiliensis, preys primarily on polychaete annelids using a peculiar and highly derived mechanism for jaw protraction. The ray captures its prey by protruding its jaws beneath the substrate and generating subambient buccal pressure to suck worms into its mouth. Initiation of this protrusion is similar to that proposed for other batoids, in that the swing of the distal ends of the hyomandibulae is transmitted to Meckel's cartilage. A "scissor-jack" model of jaw protrusion is proposed for Narcine, in which the coupling of the upper and lower jaws, and extremely flexible symphyses, allow medial compression of the entire jaw complex. This results in a shortening of the distance between the right and left sides of the jaw arch and ventral extension of the jaws. Motion of the skeletal elements involved in this extreme jaw protrusion is convergent with that described for the wobbegong shark, Orectolobus maculatus. Narcine also exhibits asymmetrical protrusion of the jaws from the midline during processing, accomplished by unequal depression of the hyomandibulae. Lower jaw versatility is a functional motif in the batoid feeding mechanism. The pronounced jaw kinesis of N. brasiliensis is partly a function of common batoid characteristics: euhyostylic jaw suspension (decoupling the jaws from the hyoid arch) and complex and subdivided cranial musculature, affording fine motor control. However, this mechanism would not be possible without the loss of the basihyal in narcinid electric rays. The highly protrusible jaw of N. brasiliensis is a versatile and maneuverable feeding apparatus well-suited for the animal's benthic feeding lifestyle.     

Eating with a saw for a jaw: Functional morphology of the jaws and tooth‐whorl in Helicoprion davisii

The recent reexamination of a tooth‐whorl fossil of Helicoprion containing intact jaws shows that the symphyseal tooth‐whorl occupies the entire length of Meckel's cartilage. Here, we use the morphology of the jaws and tooth‐whorl to reconstruct the jaw musculature and develop a biomechanical model of the feeding mechanism in these early Permian predators. The jaw muscles may have generated large bite‐forces; however, the mechanics of the jaws and whorl suggest that Helicoprion was better equipped for feeding on soft‐bodied prey. Hard shelled prey would tend to slip anteriorly from the closing jaws due to the curvature of the tooth‐whorl, lack of cuspate teeth on the palatoquadrate (PQ), and resistance of the prey. When feeding on soft‐bodied prey, deformation of the prey traps prey tissue between the two halves of the PQ and the whorl. The curvature of the tooth‐whorl and position of the exposed teeth relative to the jaw joint results in multiple tooth functions from anterior to posterior tooth that aid in feeding on soft‐bodied prey. Posterior teeth cut and push prey deeper into the oral cavity, while middle teeth pierce and cut, and anterior teeth hook and drag more of the prey into the mouth. Furthermore, the anterior‐posterior edges of the teeth facilitate prey cutting with jaw closure and jaw depression. The paths traveled by each tooth during jaw depression are reminiscent of curved pathways used with slashing weaponry such as swords and knifes. Thus, the jaws and tooth‐whorl may have formed a multifunctional tool for capturing, processing, and transporting prey by cyclic opening and closing of the lower jaw in a sawing fashion. J. Morphol. 276:47–64, 2015. © 2014 Wiley Periodicals, Inc.     

Functional morphology of jaw trabeculation in the lesser electric ray Narcine brasiliensis, with comments on the evolution of structural support in the Batoidea

The design of minimum-weight structures that retain their integrity under dynamic loading regimes has long challenged engineers. One solution to this problem found in both human and biological design is the optimization of weight and strength by hollowing a structure and replacing its inner core with supportive struts. In animals, this design is observed in sand dollar test, avian beak, and the cancellous bone of tetrapod limbs. Additionally, within the elasmobranch fishes, mineralized trabeculae (struts) have been reported in the jaws of durophagous myliobatid stingrays (Elasmobranchii: Batoidea), but were believed to be absent in basal members of the batoid clade. This study, however, presents an additional case of batoid trabeculation in the lesser electric ray, Narcine brasiliensis (Torpediniformes). The trabeculae in these species likely play different functional roles. Stingrays use their reinforced jaws to crush bivalves, yet N. brasiliensis feeds by ballistically protruding its jaws into the sediment to capture polychaetes. In N. brasiliensis, trabeculae are localized to areas likely to experience the highest load: the quadratomandibular jaw joints, hyomandibular-cranial joint, and the thinnest sections of the jaws immediately lateral to the symphyses. However, the supports perform different functions dependent on location. In regions where the jaws are loaded transversely (as in durophagous rays), "load leading" trabeculae distribute compressive forces from the cortex through the lumen of the jaws. In the parasymphyseal regions of the jaws, "truss" trabeculae form cross-braces perpendicular to the long axes of the jaws. At peak protrusion, the jaw arch is medially compressed and the jaw loaded axially such that these trabeculae are positioned to resist buckling associated with excavation forces. "Truss" trabeculae function to maintain the second moment of area in the thinnest regions of the jaws, illustrating a novel function for batoid trabeculation. Thus, this method of structural support appears to have arisen twice independently in batoids and performs strikingly different ecological functions associated with the distribution of extreme loading environments.     

Mammals with a long diastema typically also have dominant masseter and pterygoid muscles

A few orders of mammals contain many individuals with dominant masseter and pterygoid muscles that pull up and forward as they close the jaw. A dominant temporalis muscle that pulls the jaw up and to the rear is the more common condition in mammals. A long toothless region (diastema) is present in almost all mammals with a large masseter/pterygoid complex. The presence of a diastema, when few teeth have been lost and their size has not changed significantly over evolutionary time, implies that the jaws have lengthened, as in horses and selenodont artiodactyls. (A long jaw with a shorter diastema will also form if very long incisors develop as in rodents.) The sum of the forces of all the jaw muscles (represented by an arrow) typically divides the jaw into a posterior, toothless region and an anterior region where the teeth are located. In most mammals, the sum of all the bite forces at the teeth is maximized when the lengths of the projections of these two regions, onto a line perpendicular to the arrow, are in the ratio of 3 : 7. If the tooth-bearing region of the jaws becomes longer over evolutionary time this ratio will obviously be disturbed. A change in the location of some basic bony features of the jaw mechanism could maintain this ratio, but this requires major disruption of the skull and jaws. Alternatively, simply changing the masses of the muscles that close the jaw (smaller temporalis, larger masseter and/or pterygoid, or some combination), so that the lower jaw is pulled up and forward, rather than backward, also maintains the ratio. According to this view, if the jaw lengthens over evolutionary time, the relative sizes of the jaw muscles will change so that the masseter/pterygoid complex will become dominant.  © 2008 The Linnean Society of London, Zoological Journal of the Linnean Society , 2008, 153 , 625–629.     

FUNCTIONAL INNOVATIONS AND MORPHOLOGICAL DIVERSIFICATION IN PARROTFISH

The association between diversification and evolutionary innovations has been well documented and tested in studies of taxonomic richness but the impact that such innovations have on the diversity of form and function is less well understood. Using phylogenetically rigorous techniques, we investigated the association between morphological diversity and two design breakthroughs within the jaws of parrotfish. Similar intramandibular joints and other modifications of the pharyngeal jaws have evolved repeatedly in teleost fish and are frequently hypothesized to promote diversity. We quantified morphological diversity within six functionally important oral jaw traits using the Brownian motion rate of evolution to correct for phylogenetic and time‐related biases and compared these rates across clades that did and did not possess the intramandibular joint and the parrotfish pharyngeal jaw. No change in morphological diversity was associated with the pharyngeal jaw modification alone but rates of oral jaw diversification were up to 8× faster in parrotfish species that possessed both innovations. Interestingly, this morphological diversity may not have led to differential resource uses as available data suggest that members of this clade show remarkable homogeneity of diet.     

Micro- and macroevolutionary decoupling of cichlid jaws: a test of Liem's key innovation hypothesis

The extent to which elements of functional systems can change independently (modularity) likely influences the diversification of lineages. Major innovations in organismal design, like the pharyngeal jaw in cichlid fishes, may be key to a group's success when they relax constraints on diversification by increasing phenotypic modularity. In cichlid fishes, pharyngeal jaw modifications that enhanced the ability to breakdown prey may have freed their oral jaws from serving their ancestral dual role as a site of both prey capture and prey processing. This functional decoupling that allowed the oral jaws to become devoted solely to prey capture has been hypothesized to have permitted the two sets of cichlid jaws to evolve independently. We tested the hypothesis that oral and pharyngeal jaw mechanics are evolutionarily decoupled both within and among Neotropical Heroine cichlids. In the trophically polymorphic species Herichthys minckleyi, molariforms that exhibit enlarged molarlike pharyngeal jaw teeth were found to have approximately 400% greater lower jaw mass compared to H. minckleyi with the alternative papilliform pharyngeal morphology. However, oral jaw gape, lower jaw velocity ratios, anterior jaw linkage mechanics, and jaw protrusion did not differ between the morphotypes. In 40 other Heroine species, there was a weak correlation between oral jaw mechanics and pharyngeal jaw mass when phylogenetic history was ignored. Yet, after expansion of the cytochrome b phylogeny for Heroines, change in oral jaw mechanics was found to be independent of evolutionary change in pharyngeal jaw mass based on independent contrasts. Evolutionary decoupling of oral and pharyngeal jaw mechanics has likely played a critical role in the unparalleled trophic diversification of cichlid fishes.     

A forceful upper jaw facilitates picking-based prey capture: biomechanics of feeding in a butterflyfish,Chaetodon trichrous

Biomechanical models of feeding mechanisms elucidate how animals capture food in the wild, which, in turn, expands our understanding of their fundamental trophic niche. However, little attention has been given to modeling the protrusible upper jaw apparatus that characterizes many teleost species. We expanded existing biomechanical models to include upper jaw forces using a generalist butterflyfish, Chaetodon trichrous (Chaetodontidae) that produces substantial upper jaw protrusion when feeding on midwater and benthic prey. Laboratory feeding trials for C. trichrous were recorded using high-speed digital imaging; from these sequences we quantified feeding performance parameters to use as inputs for the biomechanical model. According to the model outputs, the upper jaw makes a substantial contribution to the overall forces produced during mouth closing in C. trichrous. Thus, biomechanical models that only consider lower jaw closing forces will underestimate total bite force for this and likely other teleost species. We also quantified and subsequently modeled feeding events for C. trichrous consuming prey from the water column versus picking attached prey from the substrate to investigate whether there is a functional trade-off between prey capture modes. We found that individuals of C. trichrous alter their feeding behavior when consuming different prey types by changing the timing and magnitude of upper and lower jaw movements and that this behavioral modification will affect the forces produced by the jaws during prey capture by dynamically altering the lever mechanics of the jaws. In fact, the slower, lower magnitude movements produced during picking-based prey capture should produce a more forceful bite, which will facilitate feeding on benthic attached prey items, such as corals. Similarities between butterflyfishes and other teleost lineages that also employ picking-based prey capture suggest that a suite of key behavioral and morphological innovations enhances feeding success for benthic attached prey items.     

The structure and function of a muscle articulation‐type jaw joint of a polychaete worm

The arrangement of the musculature and the fibers of the extracellular matrix (ECM) in the flexible jaw joint of the sandworm Alitta virens (Annelida, Polychaeta) was studied using dissection and histology. The jaws are capable of a wide range of motions principally related to defense and feeding. The left and right jaws are embedded in and moved by a compact pharyngeal bulb of muscle and ECM that also forms the mouth and esophagus. Eight pharyngeal bulbs were removed and dissected to document gross anatomical features or preserved and embedded in plastic for sectioning in multiple planes. The sections were stained with toluidine blue and basic fuchsin to differentiate muscle and ECM. The sections were then digitized and used to develop a three‐dimensional computer illustration. We hypothesize that the muscle and fibers in the ECM are arranged as a muscular hydrostat to support the movement of the jaws. Four specimens were recorded using a digital video camera and a tank with an angled mirror to record lateral and ventral views of jaw movements during locomotion and biting associated with burrow guarding and feeding. Frame by frame kinematic analysis of this video showed that the jaws move symmetrically in a roughly horizontal plane. Although the angle between the jaws increases and then decreases after maximum gape has been reached, the jaws also translate relative to each other such that the axis of rotation is not fixed. Together, these functional morphological and behavioral data identify the jaw mechanism as a flexible joint known as a muscle articulation. As muscle articulations have been previously described only in the beaks of cephalopods and flatworms, this study implies that this type of joint is more common and important than previously recognized. J. Morphol. 276:403–414, 2015. © 2014 Wiley Periodicals, Inc.     

Functional morphology of bite mechanics in the great barracuda (Sphyraena barracuda)

The great barracuda, Sphyraena barracuda, is a voracious marine predator that captures fish with a swift ram feeding strike. While aspects of its ram feeding kinematics have been examined, an unexamined aspect of their feeding strategy is the bite mechanism used to process prey. Barracuda can attack fish larger than the gape of their jaws, and in order to swallow large prey, can sever their prey into pieces with powerful jaws replete with sharp cutting teeth. Our study examines the functional morphology and biomechanics of 'ram-biting' behavior in great barracuda where the posterior portions of the oral jaws are used to slice through prey. Using fresh fish and preserved museum specimens, we examined the jaw mechanism of an ontogenetic series of barracuda ranging from 20 g to 8.2 kg. Jaw functional morphology was described from dissections of fresh specimens and bite mechanics were determined from jaw morphometrics using the software MandibLever (v3.2). High-speed video of barracuda biting (1500 framess(-1)) revealed that prey are impacted at the corner of the mouth during capture in an orthogonal position where rapid repeated bites and short lateral headshakes result in cutting the prey in two. Predicted dynamic force output of the lower jaw nearly doubles from the tip to the corner of the mouth reaching as high as 58 N in large individuals. A robust palatine bone embedded with large dagger-like teeth opposes the mandible at the rear of the jaws providing for a scissor-like bite capable of shearing through the flesh and bone of its prey.     

A New Approach for the Determination of Ammonite and Nautilid Habitats

Externally shelled cephalopods were important elements in open marine habitats throughout Earth history. Paleotemperatures calculated on the basis of the oxygen isotope composition of their shells can provide insights into ancient marine systems as well as the ecology of this important group of organisms. In some sedimentary deposits, however, the aragonitic shell of the ammonite or nautilid is poorly or not preserved at all, while the calcitic structures belonging to the jaws are present. This study tests for the first time if the calcitic jaw structures in fossil cephalopods can be used as a proxy for paleotemperature. We first analyzed the calcitic structures on the jaws of Recent Nautilus and compared the calculated temperatures of precipitation with those from the aragonitic shell in the same individuals. Our results indicate that the jaws of Recent Nautilus are secreted in isotopic equilibrium, and the calculated temperatures approximately match those of the shell. We then extended our study to ammonites from the Upper Cretaceous (Campanian) Pierre Shale of the U.S. Western Interior and the age-equivalent Mooreville Chalk of the Gulf Coastal Plain. In the Pierre Shale, jaws occur in situ inside the body chambers of well-preserved Baculites while in the Mooreville Chalk, the jaw elements appear as isolated occurrences in the sediment and the aragonitic shell material is not preserved. For the Pierre Shale specimens, the calculated temperatures of well-preserved jaw material match those of well-preserved shell material in the same individual. Analyses of the jaw elements in the Mooreville Chalk permit a comparison of the paleotemperatures between the two sites, and show that the Western Interior is warmer than the Gulf Coast at that time. In summary, our data indicate that the calcitic jaw elements of cephalopods can provide a reliable geochemical archive of the habitat of fossil forms.     

Functional morphology of durophagy in black carp,Mylopharyngodon piceus

The black carp, Mylopharyngodon piceus (Osteichthyes: Cyprinidae), crushes its snail and other molluscan prey with robust pharyngeal jaws and strong bite forces. Using gross morphology, histological sectioning, and X‐ray reconstruction of moving morphology (XROMM), we investigated structural, behavioral, and mechanical aspects of pharyngeal jaw function in black carp. Strut‐like trabeculae in their pharyngeal jaws support large, molariform teeth. The teeth occlude with a hypertrophied basioccipital process that is also reinforced with stout trabeculae. A keratinous chewing pad is firmly connected to the basioccipital process by a series of small bony projections from the base of the pedestal. The pharyngeal jaws have no bony articulations with the skull, and their position is controlled by five paired muscles and one unpaired median muscle. Black carp can crush large molluscs, so we used XROMM to compare pharyngeal jaw postures as fish crushed ceramic tubes of increasing sizes. We found that black carp increase pharyngeal jaw gape primarily by ventral translation of the jaws, with ventral rotation and lateral flaring of the jaws also increasing the space available to accommodate large prey items. A stout, robust ligament connects left and right jaws together firmly, but allows some rotation of the jaws relative to each other. Contrasting with the pharyngeal jaw mechanism of durophagous perciforms with fused left and right lower pharyngeal jaws, we hypothesize that this ligamentous connection may serve to decouple tensile and compressive forces, with the tensile forces borne by the ligament and the compressive forces transferred to the prey. J. Morphol. 276:1422–1432, 2015. © 2015 Wiley Periodicals, Inc.     

Biomechanics of cranial kinesis in birds: Testing linkage models in the white-throated sparrow (Zonotrichia albicollis)

Cranial kinesis in sparrows refers to the rotation of the upper jaw around its kinetic joint with the braincase. Avian jaw mechanics may involve the coupled motions of upper and lower jaws, in which the postorbital ligament transfers forces from the lower jaw, through the quadrate, pterygoid, and jugal bones, to the upper jaw. Alternatively, jaw motions may be uncoupled, with the upper jaw moving independently of the lower jaw. We tested hypotheses of cranial kinesis through the use of quantitative computer models. We present a biomechanical model of avian jaw kinetics that predicts the motions of the jaws under assumptions of both a coupled and an uncoupled mechanism. In addition, the model predicts jaw motions under conditions of force transfer by either the jugal or the pterygoid bones. Thus four alternative models may be tested using the proposed model (coupled jugal, coupled pterygoid, uncoupled jugal, uncoupled pterygoid). All models are based on the mechanics of four-bar linkages and lever systems and use morphometric data on cranial structure as the basis for predicting cranial movements. Predictions of cranial motions are tested by comparison to kinematics of white-throated sparrows (Zonotrichia albicollis) during singing. The predicted relations between jaw motions for the coupled model are significantly different from video observations. We conclude that the upper and lower jaws are not coupled in white-throated sparrows. The range of jaw motions during song is consistent with a model in which independent contractions of upper and lower jaw muscles control beak motion. © 1996 Wiley-Liss, Inc.     

Prey processing in amniotes: biomechanical and behavioral patterns of food reduction

In this paper we examine the biomechanics of prey processing behavior in the amniotes. Whether amniotes swallow prey items whole or swallow highly processed slurries or boluses of food, they share a common biomechanical system where hard surfaces (teeth or beaks) are brought together on articulated jaws by the actions of adductor muscles to grasp and process food. How have amniotes modified this basic system to increase the chewing efficiency of the system? To address this question we first examine the primitive condition for prey processing representative of many of the past and present predatory amniotes. Because herbivory is expected to be related to improved prey processing in the jaws we review patterns of food processing mechanics in past and present herbivores. Herbivory has appeared numerous times in amniotes and several solutions to the task of chewing plant matter have appeared. Birds have abandoned jaw chewing in favor of a new way to chew--with the gut--so we will detour from the jaws to examine the appearance of gut chewing in the archosaurs. We will then fill in the gaps among amniote taxa with a look at some new data on patterns of prey processing behavior and jaw mechanics in lizards. Finally, we examine evolutionary patterns of amniote feeding mechanism and how correlates of chewing relate to the need to increase the efficiency of prey processing in order to facilitate increased metabolic rate and activity.     

A functional analysis of carnassial biting

The jaw mechanism of carnivores is studied using an idealized model (Greaves, 1978). The model assumes: (i) muscle activity on both sides of the head, and (ii) that the jaw joints and the carnassial teeth are single points of contact between the skull and the lower jaw during carnassial biting. The model makes the following predictions: (i) in carnivores with carnassial teeth the resultant force of the jaw muscles will be positioned approximately 60% of the way from the jaw joint to the tooth—this arrangement delivers the maximum bite force possible together with a reasonably wide gape (remembering that bite force and gape cannot both be maximized); (ii) in an evolutionary sense, if greater bite force is required at the carnassial tooth, either the animal will get larger so as to deliver an absolutely larger bite force or the architecture of the muscles may change, becoming more pinnate, for example, but jaw geometry (i.e. the relative positions of the jaw joints, the carnassial tooth, and the muscle resultant force) will not change; (iii) if greater gape is required, the animal will get larger so as to have longer jaws and therefore an absolutely wider gape or change its muscle architecture allowing for greater stretch while the geometry remains unchanged; and (iv) in animals with a longer shearing region (e.g. the extinct hyaenodonts) the shearing region will be approximately 20% of jaw length and the muscle resultant force will be positioned approximately 60% of the way from the jaw joint to the most anterior shearing tooth.     

Satb2, modularity,and the evolvability of the vertebrate jaw

Modularity is a key mechanism bridging development and evolution and is fundamental to evolvability. Herein, we investigate modularity of the Vertebrate jaw with the aim of understanding mechanisms of its morphological evolution. Conservation of the basic structural bauplan of Vertebrate jaws led to a Hinge and Caps model, in which polarity in the patterning system of developing jaws predicts modularity. We have tested the hypothesis that the Satb2+ cell population delineates a developmental module within the mandibular jaw. Satb2 is expressed in the mesenchyme of the jaw primordia that gives rise to distal elements of both the upper and lower jaws. Loss of Satb2 specifically affects structural elements of the distal (incisor) domain, reflecting the integration of these elements as well as their independence from other mandibular domains. Reducing Satb2 dosage leads to an increase in variation in mandibular length, providing insight into the developmental potential to generate variation. Inter‐taxa comparisons reveal that the Satb2 domain is conserved within gnathostomes. We complement previous loss of function studies in mice with gene knock‐down experiments in Xenopus, providing evidence for functional conservation of Satb2 in regulating size. Finally, we present evidence that the relative size of the amniote mandibular Satb2+ domain varies in relation to epithelial Fgf8 expression, suggesting a mechanism for evolutionary change in this domain. Taken together, our data support the Hinge and Caps model and provide evidence that Satb2 regulates coordinated distal jaw modules that are subject to evolutionary modification by signals emanating from the Hinge.     

Jaw structures and movements in higher teleostean fishes

All of the diverse jaw structures in higher teleosts appear to be modifications of a single basal type and are treated as such. Only some of the principal variants are discussed. Though the two jaws act as a coordinated unit during feeding, their movements are different. The upper and lower jaws are discussed separately. In the upper jaw the principal concern is with the various types of premaxillary protrusion and with the secondary development in some groups of a rocking premaxilla. For the lower jaw most of the account is devoted to the repeated differentiation of movements in its anterior and posterior sections. The paper concludes with comments on the jaw apparatus as a functional unit and its evolution in higher teleosts.