Multiple SecA protein isoforms in Escherichia coli.

To define the anti-SecA-LacZ antiserum, immunoprecipitates produced with either whole anti-SecA-LacZ rabbit antiserum or affinity-purified antibodies were used to analyze nondenatured lysates of Escherichia coli. The antiserum contains antibodies that recognize different proteins. Antibody purified by preadsorption to the SecA-LacZ hybrid protein precipitated only the SecA protein from extracts. In contrast, antibody purified from the intact SecA protein precipitated several additional proteins with SecA protein. Ribosomal protein L7L12 is one of the polypeptides coprecipitated with SecA protein by antibody purified by immunoadsorption to the intact SecA protein as well as by unfractionated anti-SecA-LacZ antiserum. Two-dimensional gel electrophoresis of the SecA protein immunoprecipitated by either antiserum or purified antibody indicated that the SecA protein exists in at least two, and probably four, isoforms. Only one of the SecA isoforms is present in a ribosomal preparation.     

Expression, purification, and characterization of Pseudomonas aeruginosa SecA

A secA gene from Pseudomonas aeruginosa PAO1 was amplified and expressed in Escherichia coli BL21.19 (secA13) under conditions where E. coli SecA was depleted. The binding of P. aeruginosa SecA (PaSecA) to the SP-Sepharose column was facilitated by ammonium sulfate fractionation but was not necessary for E. coli SecA (EcSecA) as the later bound more efficiently. PaSecA and EcSecA were purified by the single chromatographic step to greater than 98% purity and had a recovery of more than 20 and 40%, respectively, from the soluble fraction. This simple step purification obtained a higher homogeneity than previously reported. Cross-reactivity by immunoblotting showed that the purified PaSecA contained little EcSecA if any. The purified PaSecA is a dimer in solution, as judged by size exclusion chromatography, and is slightly larger than its counterpart EcSecA with an estimated molecular weight of 240 kDa. Further studies by the sedimentation velocity method indicate that PaSecA tends to remain as a monomer in solution. The purified PaSecA possessed ATPase activity; the intrinsic and liposome-stimulated ATPase specific activities of PaSecA were approximately 50% of EcSecA.     

SecA2 is distinct from SecA in immunogenic specificity, subcellular distribution and requirement for membrane anchoring in Streptococcus parasanguis

A secA2 gene is present in the genomes of a wide variety of Gram-positive bacteria. In Streptococcus parasanguis, a primary colonizer of the tooth surface, secA2 is involved in the secretion of a small group of proteins including the fimbrial adhesin, Fap1. Although the substrate specificity is different, SecA2 is predicted to be similar to SecA in structure and function based on the homology between these two proteins. In this study, polyclonal antibodies against SecA2 and SecA did not cross-react with each other, indicating that these two proteins possessed distinct immunogenic epitopes. Fractionation analysis demonstrated that SecA2 was not evenly distributed between the cytoplasmic membrane and the cytoplasm as was noted for SecA. SecA2 was associated with the membrane in the wild type and in secA2 mutants with different regions deleted. The subcellular distribution of SecA2 was not dependent on secY2, suggesting that the membrane association is not through SecY2. These data suggested that SecA2 is distinct from SecA in many respects such as substrate specificity, immunogenic specificity, subcellular distribution and requirement for membrane anchoring.     

SecA protein is directly involved in protein secretion in Escherichia coli

A high-expression plasmid for the secA gene was constructed. The SecA protein was then overproduced in E. coli and purified. The purified SecA stimulated the in vitro translocation of a model secretory protein into inverted membrane vesicles pretreated with 4 M urea. Membrane vesicles from a secAts mutant exhibited lower translocation activity, which was enhanced by SecA. These results indicate that SecA is directly involved in protein secretion across the cytoplasmic membrane.     

The conformation of SecA, as revealed by its protease sensitivity, is altered upon interaction with ATP, presecretory proteins, everted membrane vesicles, and phospholipids

Interactions between SecA and cellular components involved in the translocation of secretory proteins across the cytoplasmic membrane of Escherichia coli were studied by examining changes in the sensitivity of SecA to staphylococcal protease V8. In the presence of ATP, the amino-terminal 95-kDa portion of the SecA molecule became highly resistant to V8 digestion. Adenosine 5'-(gamma-thio)triphosphate (ATP gamma S) and ADP were as effective as ATP. For the effect, ATP could be partly replaced by CTP and UTP, but not GTP, as in the case of the protein translocation reaction. In the presence of proOmpA, a presecretory protein, on the other hand, SecA became more sensitive to V8 digestion. The signal peptide region was involved in this effect. The V8-digestion profile in the presence of both proOmpA and ATP or ADP was the same as that in the presence of proOmpA alone. Consistently, proOmpA-induced discharge of ADP or ATP gamma S from SecA was observed by means of flow dialysis. SecA-deprived everted membrane vesicles and an E. coli phospholipid mixture were also effective in making SecA more sensitive to V8 digestion. Among the phospholipids, phosphatidylglycerol and cardiolipin were effective, whereas phosphatidylethanolamine was not. It is suggested that SecA directly interacts with these cellular components and the interactions result in changes in the conformation of SecA. The physiological significance of such interactions in protein secretion is discussed.     

Sites of interaction between SecA and the chaperone SecB, two proteins involved in export

SecB, a small tetrameric cytosolic chaperone in Escherichia coli, facilitates the export of precursor poly-peptides by maintaining them in a nonnative conformation and passing them to SecA, which is a peripheral member of the membrane-bound translocation apparatus. It has been proposed by several laboratories that as SecA interacts with various components along the export pathway, it undergoes conformational changes that are crucial to its function. Here we report details of molecular interactions between SecA and SecB, which may serve as conformational switches. One site of interaction involves the final C-terminal 21 amino acids of SecA, which are positively charged and contain zinc. The C terminus of each subunit of the SecA dimer makes contact with the flat beta-sheet that is formed by each dimer of the SecB tetramer. Here we demonstrate that a second interaction exists between the extreme C-terminal alpha-helix of SecB and a site on SecA, as yet undefined but different from the C terminus of SecA. We investigated the energetics of the interactions by titration calorimetry and characterized the hydrodynamic properties of complexes stabilized by both interactions or each interaction singly using sedimentation velocity centrifugation.     

Competitive binding of the SecA ATPase and ribosomes to the SecYEG translocon

During co-translational membrane insertion of membrane proteins with large periplasmic domains, the bacterial SecYEG complex needs to interact both with the ribosome and the SecA ATPase. Although the binding sites for SecA and the ribosome overlap, it has been suggested that these ligands can interact simultaneously with SecYEG. We used surface plasmon resonance and fluorescence correlation spectroscopy to examine the interaction of SecA and ribosomes with the SecYEG complex present in membrane vesicles and the purified SecYEG complex present in a detergent-solubilized state or reconstituted into nanodiscs. Ribosome binding to the SecYEG complex is strongly stimulated when the ribosomes are charged with nascent chains of the monotopic membrane protein FtsQ. This binding is competed by an excess of SecA, indicating that binding of SecA and ribosomes to SecYEG is mutually exclusive.     

Covalently dimerized SecA is functional in protein translocation

The ATPase SecA provides the driving force for the transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. SecA exists as a dimer in solution, but the exact oligomeric state of SecA during membrane binding and preprotein translocation is a topic of debate. To study the requirements of oligomeric changes in SecA during protein translocation, a non-dissociable SecA dimer was formed by oxidation of the carboxyl-terminal cysteines. The cross-linked SecA dimer interacts with the SecYEG complex with a similar stoichiometry as non-cross-linked SecA. Cross-linking reversibly disrupts the SecB binding site on SecA. However, in the absence of SecB, the activity of the disulfide-bonded SecA dimer is indistinguishable from wild-type SecA. Moreover, SecYEG binding stabilizes a cold sodium dodecylsulfate-resistant dimeric state of SecA. The results demonstrate that dissociation of the SecA dimer is not an essential feature of the protein translocation reaction.     

Characterization of a Bacillus subtilis SecA mutant protein deficient in translocation ATPase and release from the membrane

SecA is the precursor protein binding subunit of the bacterial precursor protein translocase, which consists of the SecY/E protein as integral membrane domain. SecA is an ATPase, and couples the hydrolysis of ATP to the release of bound precursor proteins to allow their proton-motive-force-driven translocation across the cytoplasmic membrane. A putative ATP-binding motif can be predicted from the amino acid sequence of SecA with homology to the consensus Walker A-type motif. The role of this domain is not known. A lysine residue at position 106 at the end of the glycine-rich loop in the A motif of the Bacillus subtilis SecA was replaced by an asparagine through site-directed mutagenesis (K106N SecA). A similar replacement was introduced at an adjacent lysine residue at position 101 (K101N SecA). Wild-type and mutant SecA proteins were expressed to a high level and purified to homogeneity. The catalytic efficacy (k_cat/k_m) of the K106N SecA for lipid-stimulated ATP hydrolysis was only 1% of that of the wild-type and K101N SecA. K106N SecA retained the ability to bind ATP, but its ATPase activity was not stimulated by precursor proteins. Mutant and wild-type SecA bind with similar affinity to Escherichia coli inner membrane vesicles and insert into a phospholipid mono-layer, in contrast to the wild type, membrane insertion of the K106N SecA was not prevented by ATP. K106N SecA blocks the ATP and proton-motive-force-dependent chase of a translocation intermediate to fully translocated proOmpA. It is concluded that the GKT motif in the amino-terminal domain of SecA is part of the catalytic ATP-binding site. This site may be involved in the ATP-driven protein recycling function of SecA which allows the release of SecA from its association with precursor proteins, and the phospholipid bilayer.     

The active ring-like structure of SecA revealed by electron crystallography: conformational change upon interaction with SecB

SecA is a multifunctional protein involved in protein translocation in bacteria. The structure of SecA on membrane is dramatically altered compared with that in solution, accompanying with functional changes. We previously reported the formation of a novel ring-like structure of SecA on lipid layers, which may constitute part of the preprotein translocation channel. In the present work, two-dimensional crystallization of Escherichia coli SecA on lipid monolayers was performed to reveal the structural details of SecA on lipid layers and to investigate its function. The 2D crystals composed of ring-like structures were obtained by specific interaction between SecA and negatively charged lipid. The 2D projection map and 3D reconstruction from negative stained 2D crystals exhibited a distinct open channel-like structure of SecA, with an outer diameter of 7 nm and an inner diameter of 2 nm, providing the structural evidence for SecA importance in forming the part of the translocation channel. This pore structure is altered after transferring crystals to the SecB solution, indicating that the lipid-specific SecA structure has the SecB binding activity. The strategy developed here provides a promising technique for studying structure of SecA complex with its ligand on membrane.     

Phospholipids Induce Conformational Changes of SecA to Form Membrane-Specific Domains: AFM Structures and Implication on Protein-Conducting Channels

SecA, an essential component of the Sec machinery, exists in a soluble and a membrane form in Escherichia coli. Previous studies have shown that the soluble SecA transforms into pore structures when it interacts with liposomes, and integrates into membranes containing SecYEG in two forms: SecA_S and SecA_M; the latter exemplified by two tryptic membrane-specific domains, an N-terminal domain (N39) and a middle M48 domain (M48). The formation of these lipid-specific domains was further investigated. The N39 and M48 domains are induced only when SecA interacts with anionic liposomes. Additionally, the N-terminus, not the C-terminus of SecA is required for inducing such conformational changes. Proteolytic treatment and sequence analyses showed that liposome-embedded SecA yields the same M48 and N39 domains as does the membrane-embedded SecA. Studies with chemical extraction and resistance to trypsin have also shown that these proteoliposome-embedded SecA fragments exhibit the same stability and characteristics as their membrane-embedded SecA equivalents. Furthermore, the cloned lipid-specific domains N39 and M48, but not N68 or C34, are able to form partial, but imperfect ring-like structures when they interact with phospholipids. These ring-like structures are characteristic of a SecA pore-structure, suggesting that these domains contribute part of the SecA-dependent protein-conducting channel. We, therefore, propose a model in which SecA alone is capable of forming a lipid-specific, asymmetric dimer that is able to function as a viable protein-conducting channel in the membrane, without any requirement for SecYEG.     

SecY and SecA interact to allow SecA insertion and protein translocation across the Escherichia coli plasma membrane.

SecA, the preprotein-driving ATPase in Escherichia coli, was shown previously to insert deeply into the plasma membrane in the presence of ATP and a preprotein; this movement of SecA was proposed to be mechanistically coupled with preprotein translocation. We now address the role played by SecY, the central subunit of the membrane-embedded heterotrimeric complex, in the SecA insertion reaction. We identified a secY mutation (secY205), affecting the most carboxyterminal cytoplasmic domain, that did not allow ATP and preprotein-dependent productive SecA insertion, while allowing idling insertion without the preprotein. Thus, the secY205 mutation might affect the SecYEG 'channel' structure in accepting the preprotein-SecA complex or its opening by the complex. We isolated secA mutations that allele-specifically suppressed the secY205 translocation defect in vivo. One mutant protein, SecA36, with an amino acid alteration near the high-affinity ATP-binding site, was purified and suppressed the in vitro translocation defect of the inverted membrane vesicles carrying the SecY205 protein. The SecA36 protein could also insert into the mutant membrane vesicles in vitro. These results provide genetic evidence that SecA and SecY specifically interact, and show that SecY plays an essential role in insertion of SecA in response to a preprotein and ATP and suggest that SecA drives protein translocation by inserting into the membrane in vivo.     

SecB modulates the nucleotide-bound state of SecA and stimulates ATPase activity

In Escherichia coli, the formation of SecA-SecB complexes has a direct effect on SecA ATPase activity. The mechanism of this interaction was evaluated and defined using controlled trypsinolysis, equilibrium dialysis at low temperature, and kinetic analyses of the SecA ATPase reaction. The proteolysis data indicate that SecB and the nonhydrolyzable ATP analogue AMP-P-C-P induce similar conformational changes in SecA which result in a more open or extended structure that is suggestive of the ATP-bound form. The effect is synergistic and concentration-dependent, and requires the occupation of both the high- and low-affinity nucleotide binding sites for maximum effect. The equilibrium dialysis experiments and kinetic data support the observation that the SecB-enhanced SecA ATPase activity is the result of an increased rate of ATP hydrolysis rather than an increase in the affinity of ATP for SecA and that the high-affinity nucleotide binding site is conformationally regulated by SecB. It appears that SecB may function as an intermolecular regulator of ATP hydrolysis by promoting the ATP-bound state of SecA. The inhibition of SecA ATPase activity by sodium azide in the presence of IMVs and a functional signal peptide further indicates that SecB promotes the ATP-bound form of SecA.     

SecA protein, a peripheral protein of the Escherichia coli plasma membrane, is essential for the functional binding and translocation of proOmpA.

We have reconstituted protein translocation across plasma membrane vesicles of Escherichia coli using purified proOmpA and trigger factor, a 63 kd soluble protein. Treatment of membrane vesicles with urea inactivates them for translocation unless a factor present in cytoplasmic extracts is added during the translocation reaction. Sedimentation analysis showed that the stimulatory activity is of distinctly higher mol. wt than trigger factor. Cytoplasmic extracts from a strain that greatly overproduces the SecA protein are highly enriched in the stimulatory activity for untreated membranes and restore translocation to urea-treated membranes, suggesting that this protein is the stimulatory factor. This assay was used to monitor the isolation of SecA protein from the overproducing strain. The purified protein is soluble, yet binds peripherally to membranes with high affinity and supports translocation. Using pure proOmpA, SecA protein, trigger factor and urea-treated membranes, the protein export process was resolved into binding and translocation steps. We find that proOmpA binds to membrane vesicles with or without SecA protein, but that translocation only occurs when SecA was bound prior to proOmpA.     

The SecA and SecY subunits of translocase are the nearest neighbors of a translocating preprotein, shielding it from phospholipids.

To study the environment of a preprotein as it crosses the plasma membrane of Escherichia coli, unique cysteinyl residues were introduced into proOmpA and the genes for these mutant preproteins were fused to the gene of dihydrofolate reductase (Dhfr). A photoactivable, radiolabeled and reducible cross-linker was then attached to the unique cysteinyl residue of each purified protein. Partially translocated polypeptides were generated and arrested in their membrane transit by the folded structure of the dihydrofolate reductase domain. After photolysis to label their nearest neighbors and reduction of the disulfide bond between proOmpA-Dhfr and the cross-linker, radiolabeled cross-linker was selectively recovered with the SecA and SecY subunits of preprotein translocase. Strikingly, neither the SecE nor Band 1 subunits were cross-linked to any of the constructs and the membrane phospholipids were almost entirely shielded from cross-linking. The fact that SecY and SecA are the only membrane proteins cross-linked to the translocating chains suggests that they may form an entirely proteinaceous pathway through which secreted proteins pass during membrane transit.     

Selective SecA association with signal sequences in ribosome-bound nascent chains: a potential role for SecA in ribosome targeting to the bacterial membrane

The role of SecA in selecting bacterial proteins for export was examined using a heterologous system that lacks endogenous SecA and other bacterial proteins. This approach allowed us to assess the interaction of SecA with ribosome-bound photoreactive nascent chains in the absence of trigger factor, SecB, Ffh (the bacterial protein component of the signal recognition particle), and the SecYEG translocon in the bacterial plasma membrane. In the absence of membranes, SecA photocross-linked efficiently to nascent translocation substrate OmpA in ribosome-nascent chain (RNC) complexes in an interaction that was independent of both ATP and SecB. However, no photocross-linking to a nascent membrane protein that is normally targeted by a signal recognition particle was observed. Modification of the signal sequence revealed that its affinity for SecA and Ffh varied inversely. Gel filtration showed that SecA binds tightly to both translating and non-translating ribosomes. When purified SecA.RNC complexes containing nascent OmpA were exposed to inner membrane vesicles lacking functional SecA, the nascent chains were successfully targeted to SecYEG translocons. However, purified RNCs lacking SecA were unable to target to the same membranes. Taken together, these data strongly suggest that cytosolic SecA participates in the selection of proteins for export by co-translationally binding to the signal sequences of non-membrane proteins and directing those nascent chains to the translocon.     

Full-length Escherichia coli SecA dimerizes in a closed conformation in solution as determined by cryo-electron microscopy

SecA is an obligatory component of the Escherichia coli general secretion pathway. However, the oligomeric structure of SecA and SecA conformational changes during translocation processes are still unclear. Here we obtained the three-dimensional structure of E. coli wild-type full-length SecA in solution by single particle cryo-electron microscopy and determined its oligomeric organization. In this structure, SecA occurs as a dimer in which the two protomers are arranged in an antiparallel mode, with a novel electrostatic interface, and both protomers are in closed conformation. The system developed here may provide a promising technique for studying dynamic structural changes in SecA.     

SecA: the ubiquitous component of preprotein translocase in prokaryotes

SecA is an obligatory component of the complex hetero-septameric translocase of prokaryotes. It is unique in that it exists as two forms within the holoenzyme; first, as a structural component of the preprotein channel and second, as an ATP-dependent membrane cycling factor facilitating the translocation of a broad class of proteins across the cytoplasmic membrane. While the translocase activity of SecA appears to be functionally conserved, it is not clear whether the mechanisms of regulation of the secA gene are similarly maintained. The recent characterization of an ATP-dependent RNA helicase activity of SecA offers a unique mechanism for SecA to communicate the secretion status of the cell to the appropriate regulatory circuits simply by the unwinding of an appropriate RNA target. Resolution of these two activities through combined biochemical, genetic, and biophysical studies should lead to a better understanding of the role of SecA in bacterial secretion.     

绿脓杆菌SecA ATPase抑制剂筛选模型的建立和应用

Sec途径(分泌途径,Secretion pathway)是蛋白质转运的主要途径。其中,SecA ATPase是蛋白质转运途径中的"动力泵",它通过ATP的水解循环驱使蛋白质前体穿过细菌内膜。SecA蛋白在细菌中是独有且不可缺少的。克隆和高效表达绿脓杆菌PasecAN75蛋白(绿脓杆菌SecA蛋白N端645个氨基酸残基组成的片段,大小约75 kD)并优化其ATPase酶活测定体系,在此基础上建立了更为灵敏的SecA蛋白ATPase活性抑制剂的筛选模型。运用该模型从化合物库的3220个样品中筛选得到可抑制绿脓杆菌SecA ATP酶的活性阳性化合物4个,从7196个微生物发酵液中得到66个阳性样品,筛选阳性率为0.67%(以抑制率大于30%为筛选阳性标准)。而后通过已建立的细胞水平筛选模型对其抗菌活性进行验证。研究结果表明3个化合物样品和6个发酵液样品在酶水平和细胞水平对绿脓杆菌SecA ATPase均有较好的抑制作用,值得进一步研究。     

SecA interacts with secretory proteins by recognizing the positive charge at the amino terminus of the signal peptide in Escherichia coli

SecA is an acidic, peripheral membrane protein involved in the translocation of secretory proteins across the cytoplasmic membrane. The direct interaction of SecA with secretory proteins was demonstrated by means of chemical cross-linking with 1-ethyl-3-(3-dimethylaminoprophyl)carbodiimide. OmpF-Lpp, a model secretory protein, carries either an uncleavable or cleavable signal peptide, and mutant secretory proteins derived from uncleavable OmpF-Lpp were used as translocation substrates. The interaction was SecA-specific. None of the control proteins, which are as acidic as SecA, was cross-linked with uncleavable OmpF-Lpp. The interaction was signal peptide-dependent. The interaction was increasingly enhanced as the number of positively charged amino acid residues at the amino-terminal region of the signal peptide was increased, irrespective of the species of amino acid residues donating the charge. Finally, parallelism was observed between the efficiency of interaction and that of translocation among mutant secretory proteins. It is suggested that precursors of secretory proteins interact with SecA to initiate the translocation reaction.