Nanosized bilayer disks: attractive model membranes for drug partition studies

Stable nanosized bilayer disks were prepared from either 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol, or lipid mixtures with a composition reflecting that of the porcine brush border membrane. Two different polyethylene glycol (PEG)-grafted lipids, the negatively charged 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol)-5000] (DSPE-PEG(5000)) and the neutral N-palmitoyl-sphingosine-1-[succinyl (methoxy (polyethylene glycol) 5000] (Ceramide-PEG(5000)), were used to stabilize the disks. The disks were employed as model membranes in drug partition studies based on a fast chromatography method. Results show that the lipid composition, as well as the choice of PEG-lipid, have an important influence on the partition behavior of charged drugs. Comparative studies using multilamellar liposomes indicate that bilayer disks have the potential to generate more accurate partition data than do liposomes. Further, initial investigations using bacteriorhodopsin suggest that membrane proteins can be reconstituted into the bilayer disks. This fact further strengthens the potential of the bilayer disk as an attractive model membrane.     

Nanosized bilayer disks: Attractive model membranes for drug partition studies

Stable nanosized bilayer disks were prepared from either 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol, or lipid mixtures with a composition reflecting that of the porcine brush border membrane. Two different polyethylene glycol (PEG)-grafted lipids, the negatively charged 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol)-5000] (DSPE-PEG₅₀₀₀) and the neutral N-palmitoyl-sphingosine-1-[succinyl (methoxy (polyethylene glycol) 5000] (Ceramide-PEG₅₀₀₀), were used to stabilize the disks. The disks were employed as model membranes in drug partition studies based on a fast chromatography method. Results show that the lipid composition, as well as the choice of PEG-lipid, have an important influence on the partition behavior of charged drugs. Comparative studies using multilamellar liposomes indicate that bilayer disks have the potential to generate more accurate partition data than do liposomes. Further, initial investigations using bacteriorhodopsin suggest that membrane proteins can be reconstituted into the bilayer disks. This fact further strengthens the potential of the bilayer disk as an attractive model membrane.     

Evaluation of bilayer disks as plant cell membrane models in partition studies

We have studied the partitioning of a set of phenolic compounds used as lignin precursor models into lipid bilayer disks and liposomes. The bilayer disks are open bilayer structures stabilized by polyethylene glycol-conjugated lipids. Our results indicate that disks generate more accurate partition data than do liposomes. Furthermore, we show that the partitioning into the membrane phase is reduced slightly if disks composed of 1,2-distearoyl-sn-glycero-3-phosphocholine and cholesterol are exchanged for disks with a lipid composition mimicking that of the root tissue of Zea mays L.     

Influence of poly(ethylene glycol) grafting density and polymer length on liposomes: relating plasma circulation lifetimes to protein binding

The incorporation of poly(ethylene glycol) (PEG)-conjugated lipids in lipid-based carriers substantially prolongs the circulation lifetime of liposomes. However, the mechanism(s) by which PEG-lipids achieve this have not been fully elucidated. It is believed that PEG-lipids mediate steric stabilization, ultimately reducing surface-surface interactions including the aggregation of liposomes and/or adsorption of plasma proteins. The purpose of the studies described here was to compare the effects of PEG-lipid incorporation in liposomes on protein binding, liposome-liposome aggregation and pharmacokinetics in mice. Cholesterol-free liposomes were chosen because of their increasing importance as liposomal delivery systems and their marked sensitivity to protein binding and aggregation. Specifically, liposomes containing various molecular weight PEG-lipids at a variety of molar proportions were analyzed for in vivo clearance, aggregation state (size exclusion chromatography, quasi-elastic light scattering, cryo-transmission and freeze fracture electron microscopy) as well as in vitro and in vivo protein binding. The results indicated that as little as 0.5 mol% of 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine (DSPE) modified with PEG having a mean molecular weight of 2000 (DSPE-PEG(2000)) substantially increased plasma circulation longevity of liposomes prepared of 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC). Optimal plasma circulation lifetimes could be achieved with 2 mol% DSPE-PEG(2000). At this proportion of DSPE-PEG(2000), the aggregation of DSPC-based liposomes was completely precluded. However, the total protein adsorption and the protein profile was not influenced by the level of DSPE-PEG(2000) in the membrane. These studies suggest that PEG-lipids reduce the in vivo clearance of cholesterol-free liposomal formulations primarily by inhibition of surface interactions, particularly liposome-liposome aggregation.     

Influence of poly(ethylene glycol) grafting density and polymer length on liposomes: Relating plasma circulation lifetimes to protein binding

The incorporation of poly(ethylene glycol) (PEG)-conjugated lipids in lipid-based carriers substantially prolongs the circulation lifetime of liposomes. However, the mechanism(s) by which PEG-lipids achieve this have not been fully elucidated. It is believed that PEG-lipids mediate steric stabilization, ultimately reducing surface-surface interactions including the aggregation of liposomes and/or adsorption of plasma proteins. The purpose of the studies described here was to compare the effects of PEG-lipid incorporation in liposomes on protein binding, liposome-liposome aggregation and pharmacokinetics in mice. Cholesterol-free liposomes were chosen because of their increasing importance as liposomal delivery systems and their marked sensitivity to protein binding and aggregation. Specifically, liposomes containing various molecular weight PEG-lipids at a variety of molar proportions were analyzed for in vivo clearance, aggregation state (size exclusion chromatography, quasi-elastic light scattering, cryo-transmission and freeze fracture electron microscopy) as well as in vitro and in vivo protein binding. The results indicated that as little as 0.5 mol% of 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine (DSPE) modified with PEG having a mean molecular weight of 2000 (DSPE-PEG₂₀₀₀) substantially increased plasma circulation longevity of liposomes prepared of 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC). Optimal plasma circulation lifetimes could be achieved with 2 mol% DSPE-PEG₂₀₀₀. At this proportion of DSPE-PEG₂₀₀₀, the aggregation of DSPC-based liposomes was completely precluded. However, the total protein adsorption and the protein profile was not influenced by the level of DSPE-PEG₂₀₀₀ in the membrane. These studies suggest that PEG-lipids reduce the in vivo clearance of cholesterol-free liposomal formulations primarily by inhibition of surface interactions, particularly liposome-liposome aggregation.     

Influence of preparation path on the formation of discs and threadlike micelles in DSPE-PEG(2000)/lipid systems

In a recent study we showed that the surfactant 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000 (DSPE-PEG(2000)) induce mixed micelles of either threadlike or discoidal shape when mixed with different types of lipids. In certain lipid systems the discoidal micelles adapt sizes large enough to be characterized as bilayer discs. The discs hold great potential for use in various biotechnical applications and may e.g. be used as model membranes in drug/membrane partition studies. Depending on the application, discs with certain characteristics, such as a particular size or size homogeneity, may be required. These factors can in our experience be influenced by the preparation method. In this study we systematically investigated three different PEG-lipid/lipid mixtures prepared by four commonly used preparation techniques. The techniques used were simple hydration, freeze-thawing, sonication and detergent depletion, and the aggregate size and structure was analyzed by cryo transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS). Our results show that the type and size of the micellar structure found, as well as the structure homogeneity of the preparation, can be modified by the choice of preparation path.     

Polyethylene glycol-stabilized lipid disks as model membranes in interaction studies based on electrokinetic capillary chromatography and quartz crystal microbalance

Distearoylphosphatidylcholine (DSPC)/cholesterol/distearoylphosphatidylethanolamine (DSPE)–polyethylene glycol 5000 [PEG(5000)] lipid disks, mimicking biological membranes, were used as pseudostationary phase in partial filling electrokinetic capillary chromatography (EKC) to study interactions between pharmaceuticals and lipid disks. Capillaries were coated either noncovalently with a poly(1-vinylpyrrolidone)-based copolymer or covalently with polyacrylamide to mask the negative charges of the fused-silica capillary wall and to minimize interactions between positively charged pharmaceuticals and capillary wall. Although the noncovalent copolymer coating method was faster, better stability of the covalent polyacrylamide coating at physiological pH 7.4 made it more reliable in partial filling EKC studies. Migration times of pharmaceuticals were proportional to the amount of lipids in the pseudostationary phase, and partition coefficients were successfully determined. Because the capillary coatings almost totally suppressed the electroosmotic flow, it was not practical to use the EKC-based method for partition studies involving large molecules with low mobilities. Hence, the applicability of the biomembrane mimicking lipid disks for interactions studies with large molecules was verified by the quartz crystal microbalance technique. Biotinylated lipid disks were then immobilized on streptavidin-coated sensor chip surface, and interactions with a high-molecular-mass molecule, lysozyme, were studied. Cryo-transmission electron microscopy and asymmetrical flow field-flow fractionation were used to clarify the sizes of lipid disks used.     

Construction of P-glycoprotein incorporated tethered lipid bilayer membranes

To investigate drug–membrane protein interactions, an artificial tethered lipid bilayer system was constructed for the functional integration of membrane proteins with large extra-membrane domains such as multi-drug resistance protein 1 (MDR1). In this study, a modified lipid (i.e., 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino (polyethylene glycol)-2000] (DSPE-PEG)) was utilized as a spacer molecule to elevate lipid membrane from the sensor surface and generate a reservoir underneath. Concentration of DSPE-PEG molecule significantly affected the liposome binding/spreading and lipid bilayer formation, and 0.03 mg/mL of DSPE-PEG provided optimum conditions for membrane protein integration. Further, the incorporation of MDR1 increased the local rigidity on the platform. Antibody binding studies showed the functional integration of MDR1 protein into lipid bilayer platform. The platform allowed to follow MDR!-statin-based drug interactions in vitro. Each binding event and lipid bilayer formation was monitored in real-time using Surface Plasmon Resonance and Quartz Crystal Microbalance–Dissipation systems, and Atomic Force Microscopy was used for visualization experiments.     

Biomimetic glycoliposomes as nanocarriers for targeting P-selectin on activated platelets

The cell glycocalyx is an attractive model for surface modification of liposomes with the objectives of tissue targeting and prolonged circulation time. Here, we reported on glycocalyx-mimicking liposomes, prepared by incorporating a glycolipid of 3'-sulfo-Lewis a (SuLe(a))-PEG-DSPE with a headgroup of SuLe(a) and a spacer of poly(ethylene glycol) (PEG) linked to two hydrophobic tails. This PEG spaced structure is used to mimic the extended structure of P-selectin glycoprotein ligand 1 (PSGL-1) on activated leukocytes, in order to facilitate the specific binding of liposomes to the receptor of P-selectin expressed on activated platelets. Our results indicate that SuLe(a)-PEG-DSPE can form stable, narrowly distributed liposomes with 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol, with a vesicle size of 113.3 nm. The resultant SuLe(a)-PEG-liposomes can facilitate their binding to the receptor of P-selectin 22 times higher than SuLe(a)-liposomes without a PEG spacer. Further studies by fluorescence microscopy show that SuLe(a)-PEG-liposomes can bind to activated platelets in vitro effectively. It suggests that biomimetic SuLe(a)-PEG-liposomes may be used as nanocarriers to target activated platelets for drug delivery to the injury sites of cardiovascular diseases.     

Liposomes, disks, and spherical micelles: aggregate structure in mixtures of gel phase phosphatidylcholines and poly(ethylene glycol)-phospholipids

Poly(ethylene glycol) (PEG) decorated lipid bilayers are widely used in biomembrane and pharmaceutical research. The success of PEG-lipid stabilized liposomes in drug delivery is one of the key factors for the interest in these polymer/lipid systems. From a more fundamental point of view, it is essential to understand the effect of the surface grafted polymers on the physical-chemical properties of the lipid bilayer. Herein we have used cryo-transmission electron microscopy and dynamic light scattering to characterize the aggregate structure and phase behavior of mixtures of PEG-lipids and distearoylphosphatidylcholine or dipalmitoylphosphatidylcholine. The PEG-lipids contain PEG of molecular weight 2000 or 5000. We show that the transition from a dispersed lamellar phase (liposomes) to a micellar phase consisting of small spherical micelles occurs via the formation of small discoidal micelles. The onset of disk formation already takes place at low PEG-lipid concentrations (<5 mol %) and the size of the disks decreases as more PEG-lipid is added to the lipid mixture. We show that the results from cryo-transmission electron microscopy correlate well with those obtained from dynamic light scattering and that the disks are well described by an ideal disk model. Increasing the temperature, from 25 degrees C to above the gel-to-liquid crystalline phase transition temperature for the respective lipid mixtures, has a relatively small effect on the aggregate structure.     

Ripples and the formation of anisotropic lipid domains: imaging two-component supported double bilayers by atomic force microscopy

Direct visualization of the fluid-phase/ordered-phase domain structure in mica-supported bilayers composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine/1,2-distearoyl-sn-glycero-3-phosphocholine mixtures is performed with atomic force microscopy. The system studied is a double bilayer supported on a mica surface in which the top bilayer (which is not in direct contact with the mica) is visualized as a function of temperature. Because the top bilayer is not as restricted by the interactions with the surface as single supported bilayers, its behavior is more similar to a free-standing bilayer. Intriguing straight-edged anisotropic fluid-phase domains were observed in the fluid-phase/ordered-phase coexistence temperature range, which resemble the fluid-phase/ordered-phase domain patterns observed in giant unilamellar vesicles composed of such phospholipid mixtures. With the high resolution provided by atomic force microscopy, we investigated the origin of these anisotropic lipid domain patterns, and found that ripple phase formation is directly responsible for the anisotropic nature of these domains. The nucleation and growth of fluid-phase domains are found to be directed by the presence of ripples. In particular, the fluid-phase domains elongate parallel to the ripples. The results show that ripple phase formation may have implications for domain formation in biological systems.     

Drug-membrane interactions studied in phospholipid monolayers adsorbed on nonporous alkylated microspheres

Characterization of interactions with phospholipids is an integral part of the in vitro profiling of drug candidates because of the roles the interactions play in tissue accumulation and passive diffusion. Currently used test systems may inadequately emulate the bilayer core solvation properties (immobilized artificial membranes [IAM]), suffer from potentially slow transport of some chemicals (liposomes in free or immobilized forms), and require a tedious separation (if used for free liposomes). Here the authors introduce a well-defined system overcoming these drawbacks: nonporous octadecylsilica particles coated with a self-assembled phospholipid monolayer. The coating mimics the structure of the headgroup region, as well as the thickness and properties of the hydrocarbon core, more closely than IAM. The monolayer has a similar transition temperature pattern as the corresponding bilayer. The particles can be separated by filtration or a mild centrifugation. The partitioning equilibria of 81 tested chemicals were dissected into the headgroup and core contributions, the latter using the alkane/water partition coefficients. The deconvolution allowed a successful prediction of the bilayer/water partition coefficients with the standard deviation of 0.26 log units. The plate-friendly assay is suitable for high-throughput profiling of drug candidates without sacrificing the quality of analysis or details of the drug-phospholipid interactions.     

Structural and functional comparisons of pH-sensitive liposomes composed of phosphatidylethanolamine and three different diacylsuccinylglycerols

The titratable, double-chain amphiphiles 1,2-dipalmitoyl-sn-3-succinylglycerol (1,2-DPSG), 1,2-dioleoyl-sn-3-succinylglycerol (1,2-DOSG) and 1,3-dipalmitoylsuccinylglycerol (1,3-DPSG) have been used in combination with phosphatidylethanolamine (PE) to form pH-sensitive liposomes. The effect of the compounds on dielaidoyl PE bilayer stabilization was examined by differential scanning calorimetry. Only 1,2-DPSG showed bilayer stabilization activity; whereas the other two are destabilizers at pH 7.4. All three amphiphiles became strong destabilizers at pH 5.0. The ability of the amphiphiles to stabilize DOPE liposomes was examined by light scattering and calcein entrapment. In general, 1,2-DPSG is the most potent stabilizer of PE bilayers while 1,3-DPSG is the weakest liposome stabilizer. All three compounds can be combined with DOPE to generate liposomes which are stable at neutral and basic pH. At weakly acidic pH, the liposomes are leaky and exhibit extensive lipid mixing, with protons and calcium showing synergistic effects on lipid mixing. DOPE/1,2-DPSG liposomes are stable in human plasma and remain acid-sensitive even after prolonged plasma incubation. Immunoliposomes prepared from either DOPE/1,2-DPSG or DOPE/1,2-DOSG can deliver diphtheria toxin A fragment to the cytoplasm of cultured cells in a process which involves endocytosis of the liposomes. Immunoliposomes prepared with 1,2-DPSG are more effective drug carriers than those prepared with 1,2-DOSG. These results indicate that the bilayer- and, hence the liposome-stabilization activity of the diacylsuccinylglycerol depends on the structure of the compounds. The potential drug delivery activity of the pH-sensitive liposomes composed of these lipids is discussed.     

Intermembrane transfer of polyethylene glycol-modified phosphatidylethanolamine as a means to reveal surface-associated binding ligands on liposomes

In order to explore the use of exchangeable poly(ethylene glycol) (PEG)-modified diacylphosphatidylethanolamines (PE) to temporarily shield binding ligands attached to the surface of liposomes, a model reaction based on inhibition and subsequent recovery of biotinylated liposome binding to streptavidin immobilized on superparamagnetic iron oxide particles (SA magnetic particles) was developed. PEG-lipid incorporation into biotinylated liposomes decreased liposome binding to SA magnetic particles in a non-linear fashion, where as little as 0.1 mol% PEG-PE resulted in a 20% decrease in binding. Using an assay based on inhibition of binding, PEG(2000)-PE transfer from donor liposomes to biotinylated acceptor liposomes could be measured. The influence of temperature and acyl chain composition on the transfer of PEG-diacyl PEs from donor liposomes to acceptor liposomes, consisting of 1,2-dioleoyl-sn-glycero-3-phosphocholine, cholesterol and N-((6-biotinoyl)amino)hexanoyl)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (54.9:45:0.1 mole ratio), was measured. Donor liposomes were prepared using 1,2-distearoyl-sn-glycero-3-phosphocholine (50 mol%), cholesterol (45 mol%) and 5 mol% of either PEG-derivatized 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE-PEG(2000)), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE-PEG(2000)), or 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE-PEG(2000)). Transfer of DSPE-PEG(2000) to the donor liposomes was not detected under the conditions employed. In contrast, DMPE-PEG(2000) was transferred efficiently even at 4 degrees C. Using an acceptor to donor liposome ratio of 1:4, the time required for DMPE-PEG(2000) to become evenly distributed between the two liposome populations (T(EQ)) at 4 degrees C and 37 degrees C was approx. 2 and <0.5 h, respectively. An increase in acyl chain length from C14:0 to C16:0 of the PEG-lipid resulted in a significant reduction in the rate of transfer as measured by this assay. The transfer of PEG-lipid out of biotinylated liposomes was also studied in mice following intravenous administration. The relative rates of transfer for the various PEG-lipids were found to be comparable under in vivo and in vitro conditions. These results suggest that it is possible to design targeted liposomes with the targeting ligand protected while in the circulation through the use of PEG-lipids that are selected on the basis of exchange characteristics which result in exposure of the shielded ligand following localization within a target tissue.     

Interactions of polymerizable phosphatidylcholine vesicles with blood components: relevance to biocompatibility

We have studied the biocompatibility properties of polymerizable phosphatidylcholine bilayer membranes, in the form of liposomes, with a view toward the eventual utilization of such polymerized lipid assemblies in drug carrier systems or as surface coatings for biomaterials. The SH-based polymerizable lipid 1,2-bis[1,2-(lipoyl)dodecanoyl]-sn-glycero-3-phosphocholine (dilipoyl lipid, DLL) and the methacryl-based lipid 1,2-bis[(methacryloyloxy)dodecanoyl]-sn-glycero-3-phosphocholine (dipolymerizable lipid, DPL) were studied in comparison to ‘conventional’ zwitterionic or charged phospholipids. We examined binding of serum proteins to liposomes and effects of liposomes on fibrin clot formation and on platelet aggregation. All types of liposomes tested bound complex mixtures of serum proteins with IgG being the most abundant bound component. DPL vesicles and anionic vesicles bound substantially more protein than other vesicle types. Polymerized DPL vesicles uniquely bound a protein of about 53 kDa which was not bound to other types of phosphatidylcholine liposomes. Likewise polymerized DPL vesicles, but not other types of phosphatidylcholine vesicles, caused a marked alteration in coagulation as measured by activated partial thromboplastin time (APTT) and prothrombin time (PT) tests; this effect was shown to be due to binding and depletion of clothing factor V by the DPL polymerized vesicles. Polymerized DPL liposomes and DLL liposomes in polymerized or nonpolymerized form, were without substantial effect on platelet aggregation. However, DPL nonpolymerized vesicles, while not causing aggregation, did impair ADP-induced aggregation of platelets. These studies suggest that SH based polymerizable lipids of the DLL type may be very suitable for in vivo use in the contexts of drug delivery systems or biomaterials development. Methacryloyl-based lipids of the DPL type seem to display interactions with the hemostatic process which militate against their in vivo utilization.     

Stimulated release of cholesterol from liposomal membranes by a PEGylated phospholipid

PEGylated phospholipids are commonly used to increase the blood-circulation time of liposomes by providing a steric barrier around them. This paper documents a fundamentally new property of these lipids-an ability to stimulate the release of cholesterol from phospholipid membranes. Evidence for such stimulation has been obtained by measuring the transport of dehydroergosterol (DHE), a fluorescent simulant of cholesterol, from donor liposomes made from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000 (DSPE-PEG(2000)), and DHE to acceptor liposomes made from POPC, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), and cholesterol. The potential of PEGylated lipids to serve as novel cholesterol-lowering agents is briefly discussed.     

Biotinylated lipid bilayer disks as model membranes for biosensor analyses

The aim of this study was to investigate the potential of polyethylene glycol (PEG)-stabilized lipid bilayer disks as model membranes for surface plasmon resonance (SPR)-based biosensor analyses. Nanosized bilayer disks that included 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[biotinyl(polyethylene glycol)₂₀₀₀] (DSPE-PEG₂₀₀₀-biotin) were prepared and structurally characterized by cryo-transmission electron microscopy (cryo-TEM) imaging. The biotinylated disks were immobilized via streptavidin to three different types of sensor chips (CM3, CM4, and CM5) varying in their degree of carboxymethylation and thickness of the dextran matrix. The bilayer disks were found to interact with and bind stably to the streptavidin-coated sensor surfaces. As a first step toward the use of these bilayer disks as model membranes in SPR-based studies of membrane proteins, initial investigations were carried out with cyclooxygenases 1 and 2 (COX 1 and COX 2). Bilayer disks were preincubated with the respective protein and thereafter allowed to interact with the sensor surface. The signal resulting from the interaction was, in both cases, significantly enhanced as compared with the signal obtained when disks alone were injected over the surface. The results of the study suggest that bilayer disks constitute a new and promising type of model membranes for SPR-based biosensor studies.     

Formation of transition metal-doxorubicin complexes inside liposomes

Doxorubicin complexation with the transition metal manganese (Mn(2+)) has been characterized, differentiating between the formation of a doxorubicin-metal complex and doxorubicin fibrous-bundle aggregates typically generated following ion gradient-based loading procedures that rely on liposome encapsulated citrate or sulfate salts. The physical and chemical characteristics of the encapsulated drug were assessed using cryo-electron microscopy, circular dichroism (CD) and absorbance spectrophotometric analysis. In addition, in vitro and in vivo drug loading and release characteristics of the liposomal formulations were investigated. Finally, the internal pH after drug loading was measured with the aim of linking formation of the Mn(2+) complex to the presence or absence of a transmembrane pH gradient. Doxorubicin was encapsulated into either 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/cholesterol (Chol) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC)/Chol liposomes, where the entrapped salts were citrate, MnSO(4) or MnCl(2). In response to a pH gradient or a Mn(2+) ion gradient, doxorubicin accumulated inside to achieve a drug-to-lipid ratio of approximately 0.2:1 (wt/wt). Absorbance and CD spectra of doxorubicin in the presence of Mn(2+) suggested that there are two distinct structures captured within the liposomes. In the absence of added ionophore A23187, drug loading is initiated on the basis of an established pH gradient; however, efficient drug uptake is not dependent on maintenance of the pH gradient. Drug release from DMPC/Chol is comparable regardless of whether doxorubicin is entrapped as a citrate-based aggregate or a Mn(2+) complex. However, in vivo drug release from DSPC/Chol liposomes indicate less than 5% or greater than 50% drug loss over a 24-h time course when the drug was encapsulated as an aggregate or a Mn(2+) complex, respectively. These studies define a method for entrapping drugs possessing coordination sites capable of complexing transition metals and suggest that drug release is dependent on lipid composition, internal pH, as well as the nature of the crystalline precipitate, which forms following encapsulation.     

Membrane permeabilizing activity of amphotericin B is affected by chain length of phosphatidylcholine added as minor constituent

The effect of acyl-chain length of phospholipid on the membrane permeabilizing activity of amphotericin B (AmB) was examined using egg phosphatidylcholine (eggPC) liposomes containing 5% or 20% phosphatidylcholine with various lengths of fatty acyl chains from C(10) to C(18); 1,2-dicapryloyl-sn-glycero-3-phosphocholine (DCPC), 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). The membrane activity of AmB was evaluated by two methods; the drug was added to a liposome suspension (added-via-aqua), or mixed with lipids prior to liposome preparation (mixed-with-lipid). In both cases, K(+) influx by AmB was measured as pH change inside liposomes by 31P-NMR. The C(10) and C(12) acyl phospholipids markedly enhanced the activity of AmB, the C(14) and C(16) lipids virtually showed no effect, and the C(18) lipid was inhibitory to the AmB's action. Clear distinction between the C(12) and C(14) lipids, which differ only in acyl chains by two carbons, implies that molecular interaction between phospholipid and AmB is partly due to the matching of their hydrophobic length.     

Rational design of amphiphile-based drug carriers and sterically stabilized carriers

Abstract

This paper describes the parameters recommended for rational design of amphiphile-based drug carriers. The main advantage of a carrier is its ability to modify the pharmacokinetics and biodistribution of the drug, so that the drug level at the target is sufficient for therapeutic benefits. Three parameters are described. Two of them, the drug-to-carrier partition coefficient (Ky_iC) and the rate of drug release from the carrier (k_ff), are related to drug-carrier interactions; the third one is the rate of carrier clearance (k_c). We demonstrate that carrier performance for drugs associated with the carrier amphiphile(s) is determined to a large extent by K_c, while for drugs encapsulated in the aqueous phase of the carrier it is important that k_off will be similar to k_c These conclusions are based on two examples: (i) Amphotericin B as a drug associated with five dosage forms which represent different types of amphiphile-based carriers: micelles (Fungizone), stable micelle-like disks (Amphocil), a complex with phospholipids (ABPLC), liposomes (AmBisome), and a submicronized emulsion, (ii) Liposomal doxorubicin which consisted of either doxorubicin associated with the membrane of negatively-charged, fluid oligolamellar liposomes (L-DOX) or doxorubicin loaded by an ammonium sulfate gradient into small, unilamellar, rigid liposomes having steric stabilizing lipid grafted in their lipid bilayer, (S-DOX). To better understand what contributes to k, we also describe the effect of bilayer acyl chain composition and the role of precipitation of the drug inside the liposomes.