Laser nanosurgery in cell biology

Since their first use in the early 60's, pulsed lasers have become increasingly popular for their ability to ablate biological tissue. Short laser pulses allow high precision surgery for biological and medical applications with minimal invasiveness. Performing highly targeted manipulation and ablation allows experiments impossible so far in development biology, cellular biology or even assisted reproductive technologies and laser surgery has been increasingly used over the last five years to answer key questions in Biology. Recently, picosecond UV and femtosecond IR laser pulses have been used to cleave microtubules and to severe actin stress fibers in vivo with a spatial precision in the submicrometer range to study their dynamics without affecting cell viability. We review recent findings on the underlying principles of pulsed laser nanosurgery mechanisms showing how the use of ultra short laser pulses increases precision and non-invasiveness of laser surgery. We show how the understanding of the surgical process allows one to distinguish between single cell ablation in living organisms or intracellular nanosurgery in living cells and we review recent applications to the study of forces and the quantification of cytoskeleton dynamics.     

Laser-guidance based cell detection for identifying malignant cancerous cells without any fluorescent markers

Laser guidance technique employs the optical forces generated from a focused Gaussian laser beam incident on a biological cell to trap and guide the cell along the laser propagation direction. The optical force, which determines the guidance speed, is dependent on the cellular characteristics of the cell being guided, such as size, shape, composition and morphology. Different cell populations or subpopulations can be detected without any fluorescent markers by measuring their guidance speeds. We found that cell guidance speeds were sensitive enough to monitor the subtle changes during the progression of mouse fibroblast cells from normal to cancerous phenotype. The results also demonstrated that this technique can effectively distinguish mouse mammary cancerous cells with different metastatic competence. Laser guidance technique can be used as a label-free cell detection method for basic cell biological investigation and cancer diagnosis.     

Viscoelastic retraction of single living stress fibers and its impact on cell shape, cytoskeletal organization, and extracellular matrix mechanics

Cells change their form and function by assembling actin stress fibers at their base and exerting traction forces on their extracellular matrix (ECM) adhesions. Individual stress fibers are thought to be actively tensed by the action of actomyosin motors and to function as elastic cables that structurally reinforce the basal portion of the cytoskeleton; however, these principles have not been directly tested in living cells, and their significance for overall cell shape control is poorly understood. Here we combine a laser nanoscissor, traction force microscopy, and fluorescence photobleaching methods to confirm that stress fibers in living cells behave as viscoelastic cables that are tensed through the action of actomyosin motors, to quantify their retraction kinetics in situ, and to explore their contribution to overall mechanical stability of the cell and interconnected ECM. These studies reveal that viscoelastic recoil of individual stress fibers after laser severing is partially slowed by inhibition of Rho-associated kinase and virtually abolished by direct inhibition of myosin light chain kinase. Importantly, cells cultured on stiff ECM substrates can tolerate disruption of multiple stress fibers with negligible overall change in cell shape, whereas disruption of a single stress fiber in cells anchored to compliant ECM substrates compromises the entire cellular force balance, induces cytoskeletal rearrangements, and produces ECM retraction many microns away from the site of incision; this results in large-scale changes of cell shape (> 5% elongation). In addition to revealing fundamental insight into the mechanical properties and cell shape contributions of individual stress fibers and confirming that the ECM is effectively a physical extension of the cell and cytoskeleton, the technologies described here offer a novel approach to spatially map the cytoskeletal mechanics of living cells on the nanoscale.     

Spatio‐temporally precise activation of engineered receptor tyrosine kinases by light

Receptor tyrosine kinases (RTKs) are a large family of cell surface receptors that sense growth factors and hormones and regulate a variety of cell behaviours in health and disease. Contactless activation of RTKs with spatial and temporal precision is currently not feasible. Here, we generated RTKs that are insensitive to endogenous ligands but can be selectively activated by low‐intensity blue light. We screened light‐oxygen‐voltage (LOV)‐sensing domains for their ability to activate RTKs by light‐activated dimerization. Incorporation of LOV domains found in aureochrome photoreceptors of stramenopiles resulted in robust activation of the fibroblast growth factor receptor 1 (FGFR1), epidermal growth factor receptor (EGFR) and rearranged during transfection (RET). In human cancer and endothelial cells, light induced cellular signalling with spatial and temporal precision. Furthermore, light faithfully mimicked complex mitogenic and morphogenic cell behaviour induced by growth factors. RTKs under optical control (Opto‐RTKs) provide a powerful optogenetic approach to actuate cellular signals and manipulate cell behaviour.     

High-speed high-resolution imaging of intercellular immune synapses using optical tweezers

Imaging in any plane other than horizontal in a microscope typically requires a reconstruction from multiple optical slices that significantly decreases the spatial and temporal resolution that can be achieved. This can limit the precision with which molecular events can be detected, for example, at intercellular contacts. This has been a major issue for the imaging of immune synapses between live cells, which has generally required the reconstruction of en face intercellular synapses, yielding spatial resolution significantly above the diffraction limit and updating at only a few frames per minute. Strategies to address this issue have usually involved using artificial activating substrates such as antibody-coated slides or supported planar lipid bilayers, but synapses with these surrogate stimuli may not wholly resemble immune synapses between two cells. Here, we combine optical tweezers and confocal microscopy to realize generally applicable, high-speed, high-resolution imaging of almost any arbitrary plane of interest. Applied to imaging immune synapses in live-cell conjugates, this has enabled the characterization of complex behavior of highly dynamic clusters of T cell receptors at the T cell/antigen-presenting cell intercellular immune synapse and revealed the presence of numerous, highly dynamic long receptor-rich filopodial structures within inhibitory Natural Killer cell immune synapses.     

Laser tweezers and multiphoton microscopes in life sciences

Near infrared (NIR) laser microscopy enables optical micromanipulation, piconewton force determination, and sensitive fluorescence studies by laser tweezers. Otherwise, fluorescence images with high spatial and temporal resolution of living cells and tissues can be obtained via non-resonant fluorophore excitation with multiphoton NIR laser scanning microscopes. Furthermore, NIR femtosecond laser pulses at TW/cm2 intensities can be used to realize non-invasive contact-free surgery of nanometer-sized structures within living cells and tissues. Applications of these novel versatile NIR laser-based tools for the determination of motility forces, coenzyme and chlorophyll imaging, three-dimensional multigene detection, non-invasive optical sectioning of tissues ("optical biopsy"), functional protein imaging, and nanosurgery of chromosomes are described.     

Enhanced operation of femtosecond lasers and applications in cell transfection

In this work we present a review and discussion on the enhancement of femtosecond (fs) lasers for use within biophotonics with a particular focus on their use in optical transfection techniques. We describe the broad range of source options now available for the generation of femtosecond pulses before briefly reviewing the application of fs laser in optical transfection studies. We show that major performance enhancements may be obtained by optimising the spatial and temporal performance of the laser source before considering possible future directions in this field. In relation to optical transfection we describe how such laser sources initiate a multiphoton process to permeate the cell membrane in a transient fashion. We look at aspects of this technique including the ability to combine transfection with optical trapping. For future implementation of such transfection we explore the role of new sources and “nondiffracting” light fields. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Application of high-density optical microwell arrays in a live-cell biosensing system

In this paper, we use optical imaging fibers to fabricate a chemical and biochemical sensor that utilizes the ability of living cells to respond to biologically significant compounds. The sensor is created by randomly dispersing single NIH 3T3 mouse fibroblast cells into an optically addressable fiber-optic microwell array such that each microwell accommodates a single cell. The cells are encoded to identify their location within the array and to correlate changes or manipulations in the local environment to responses of specific cell types. The entire array can be simultaneously measured, yielding a rapid, repetitive, and high-density analysis method.     

The optical stretcher: a novel laser tool to micromanipulate cells.

When a dielectric object is placed between two opposed, nonfocused laser beams, the total force acting on the object is zero but the surface forces are additive, thus leading to a stretching of the object along the axis of the beams. Using this principle, we have constructed a device, called an optical stretcher, that can be used to measure the viscoelastic properties of dielectric materials, including biologic materials such as cells, with the sensitivity necessary to distinguish even between different individual cytoskeletal phenotypes. We have successfully used the optical stretcher to deform human erythrocytes and mouse fibroblasts. In the optical stretcher, no focusing is required, thus radiation damage is minimized and the surface forces are not limited by the light power. The magnitude of the deforming forces in the optical stretcher thus bridges the gap between optical tweezers and atomic force microscopy for the study of biologic materials.     

Simultaneous Multicolor Imaging of Biological Structures with Fluorescence Photoactivation Localization Microscopy

Localization-based super resolution microscopy can be applied to obtain a spatial map (image) of the distribution of individual fluorescently labeled single molecules within a sample with a spatial resolution of tens of nanometers. Using either photoactivatable (PAFP) or photoswitchable (PSFP) fluorescent proteins fused to proteins of interest, or organic dyes conjugated to antibodies or other molecules of interest, fluorescence photoactivation localization microscopy (FPALM) can simultaneously image multiple species of molecules within single cells. By using the following approach, populations of large numbers (thousands to hundreds of thousands) of individual molecules are imaged in single cells and localized with a precision of ~10-30 nm. Data obtained can be applied to understanding the nanoscale spatial distributions of multiple protein types within a cell. One primary advantage of this technique is the dramatic increase in spatial resolution: while diffraction limits resolution to ~200-250 nm in conventional light microscopy, FPALM can image length scales more than an order of magnitude smaller. As many biological hypotheses concern the spatial relationships among different biomolecules, the improved resolution of FPALM can provide insight into questions of cellular organization which have previously been inaccessible to conventional fluorescence microscopy. In addition to detailing the methods for sample preparation and data acquisition, we here describe the optical setup for FPALM. One additional consideration for researchers wishing to do super-resolution microscopy is cost: in-house setups are significantly cheaper than most commercially available imaging machines. Limitations of this technique include the need for optimizing the labeling of molecules of interest within cell samples, and the need for post-processing software to visualize results. We here describe the use of PAFP and PSFP expression to image two protein species in fixed cells. Extension of the technique to living cells is also described.     

Optogenetic control of cell function using engineered photoreceptors

Over the past decades, there has been growing recognition that light can provide a powerful stimulus for biological interrogation. Light‐actuated tools allow manipulation of molecular events with ultra‐fine spatial and fast temporal resolution, as light can be rapidly delivered and focused with sub‐micrometre precision within cells. While light‐actuated chemicals such as photolabile ‘caged’ compounds have been in existence for decades, the use of genetically encoded natural photoreceptors for optical control of biological processes has recently emerged as a powerful new approach with several advantages over traditional methods. Here, we review recent advances using light to control basic cellular functions and discuss the engineering challenges that lie ahead for improving and expanding the ever‐growing optogenetic toolkit.     

Control and manipulation of pathogens with an optical trap for live cell imaging of intercellular interactions

The application of live cell imaging allows direct visualization of the dynamic interactions between cells of the immune system. Some preliminary observations challenge long-held beliefs about immune responses to microorganisms; however, the lack of spatial and temporal control between the phagocytic cell and microbe has rendered focused observations into the initial interactions of host response to pathogens difficult. This paper outlines a method that advances live cell imaging by integrating a spinning disk confocal microscope with an optical trap, also known as an optical tweezer, in order to provide exquisite spatial and temporal control of pathogenic organisms and place them in proximity to host cells, as determined by the operator. Polymeric beads and live, pathogenic organisms (Candida albicans and Aspergillus fumigatus) were optically trapped using non-destructive forces and moved adjacent to living cells, which subsequently phagocytosed the trapped particle. High resolution, transmitted light and fluorescence-based movies established the ability to observe early events of phagocytosis in living cells. To demonstrate the broad applicability of this method to immunological studies, anti-CD3 polymeric beads were also trapped and manipulated to form synapses with T cells in vivo, and time-lapse imaging of synapse formation was also obtained. By providing a method to exert fine control of live pathogens with respect to immune cells, cellular interactions can be captured by fluorescence microscopy with minimal perturbation to cells and can yield powerful insight into early responses of innate and adaptive immunity.     

Manipulation of living cells by using PC-controlled micro-pattern projection system

In order to meet the diversifying demand for the cell manipulation in the rapid progress of cell engineering, we developed a novel technique to capture the living cells on a culture substrate by irradiating light in a multiple manner. In clear contrast to the conventional cell patterning using the previously patterned substrate, the cell-retaining area can be defined even after cell seeding, and the captured cells can continue to grow freely beyond the defined area afterwards. After the light irradiation in arbitrary micropattern by using a newly developed apparatus and the process to remove non-captured cells including EDTA treatment, the highly contrasted cell patterns were formed with the precision of single cell size. Moreover, it was determined that the cell capturing arose just after light irradiation and diminished gradually in a time scale of 10h. It was confirmed that the cells maintained their viability well after the manipulation process including photo-induced cell capturing.     

A mercury arc lamp-based multi-color confocal real time imaging system for cellular structure and function

Multi-point scanning confocal microscopy using a Nipkow disk enables the acquisition of fluorescent images with high spatial and temporal resolutions. Like other single-point scanning confocal systems that use Galvano meter mirrors, a commercially available Nipkow spinning disk confocal unit, Yokogawa CSU10, requires lasers as the excitation light source. The choice of fluorescent dyes is strongly restricted, however, because only a limited number of laser lines can be introduced into a single confocal system. To overcome this problem, we developed an illumination system in which light from a mercury arc lamp is scrambled to make homogeneous light by passing it through a multi-mode optical fiber. This illumination system provides incoherent light with continuous wavelengths, enabling the observation of a wide range of fluorophores. Using this optical system, we demonstrate both the high-speed imaging (up to 100 Hz) of intracellular Ca(2+) propagation, and the multi-color imaging of Ca(2+) and PKC-gamma dynamics in living cells.     

Use of an Optical Trap for Study of Host-Pathogen Interactions for Dynamic Live Cell Imaging

Dynamic live cell imaging allows direct visualization of real-time interactions between cells of the immune system^{1, 2}; however, the lack of spatial and temporal control between the phagocytic cell and microbe has rendered focused observations into the initial interactions of host response to pathogens difficult. Historically, intercellular contact events such as phagocytosis³ have been imaged by mixing two cell types, and then continuously scanning the field-of-view to find serendipitous intercellular contacts at the appropriate stage of interaction. The stochastic nature of these events renders this process tedious, and it is difficult to observe early or fleeting events in cell-cell contact by this approach. This method requires finding cell pairs that are on the verge of contact, and observing them until they consummate their contact, or do not. To address these limitations, we use optical trapping as a non-invasive, non-destructive, but fast and effective method to position cells in culture.Optical traps, or optical tweezers, are increasingly utilized in biological research to capture and physically manipulate cells and other micron-sized particles in three dimensions⁴. Radiation pressure was first observed and applied to optical tweezer systems in 1970^{5, 6}, and was first used to control biological specimens in 1987⁷. Since then, optical tweezers have matured into a technology to probe a variety of biological phenomena^8-13.We describe a method¹⁴ that advances live cell imaging by integrating an optical trap with spinning disk confocal microscopy with temperature and humidity control to provide exquisite spatial and temporal control of pathogenic organisms in a physiological environment to facilitate interactions with host cells, as determined by the operator. Live, pathogenic organisms like Candida albicans and Aspergillus fumigatus, which can cause potentially lethal, invasive infections in immunocompromised individuals^{15, 16} (e.g. AIDS, chemotherapy, and organ transplantation patients), were optically trapped using non-destructive laser intensities and moved adjacent to macrophages, which can phagocytose the pathogen. High resolution, transmitted light and fluorescence-based movies established the ability to observe early events of phagocytosis in living cells. To demonstrate the broad applicability in immunology, primary T-cells were also trapped and manipulated to form synapses with anti-CD3 coated microspheres in vivo, and time-lapse imaging of synapse formation was also obtained. By providing a method to exert fine spatial control of live pathogens with respect to immune cells, cellular interactions can be captured by fluorescence microscopy with minimal perturbation to cells and can yield powerful insight into early responses of innate and adaptive immunity.     

Tracking mechanics and volume of globular cells with atomic force microscopy using a constant-height clamp

To understand the role of physical forces at a cellular level, it is necessary to track mechanical properties during cellular processes. Here we present a protocol that uses flat atomic force microscopy (AFM) cantilevers clamped at constant height, and light microscopy to measure the resistance force, mechanical stress and volume of globular animal cells under compression. We describe the AFM and cantilever setup, live cell culture in the AFM, how to ensure stability of AFM measurements during medium perfusion, integration of optical microscopy to measure parameters such as volume and track intracellular dynamics, and interpretation of the physical parameters measured. Although we use this protocol on trypsinized interphase and mitotic HeLa cells, it can also be applied to other cells with a relatively globular shape, especially animal cells in a low-adhesive environment. After a short setup phase, the protocol can be used to investigate approximately one cell per hour.     

Optical recording system based on a fiber optic image conduit: assessment of microscopic activation patterns in cardiac tissue.

Optical recording of transmembrane voltage changes with the use of potentiometric dyes has opened the possibility of determining spatial patterns of electrical activity in excitable tissues. To follow such activation patterns on the cellular/subcellular level in heart cell cultures, a recording system was developed that features both high spatial resolution (4-200 microm) and high temporal resolution (uncertainty in the determination of delays between fast rising signals of +/-1 micros). Central to the system is a fiber optic image conduit consisting of 379 individual optical fibers. At one end the fibers are fused to form an input window that matches the size of the field of view of the microscope. At the other end, the fibers are loose, permitting a selectable subset to be connected to 80 discrete photodetectors. This design allows the sensitive area of the imager to be adapted to regions of interest in a given preparation, thus making optimal use of the limited number of detectors. Furthermore, by using a second fiber optic imager, individual photodetectors can be assigned to different optical ports, thus providing the means for fast and simultaneous dual-emission wavelength measurements. This feature permitted the elimination of motion artifacts arising from the myocytes without the use of contraction-suppressing drugs.     

Triple immunofluorescence confocal laser scanning microscopy: spatial correlation of novel cellular differentiation markers in human muscle biopsies.

Two different methods for triple immunofluorescence imaging with a confocal laser scanning microscope (CLSM) are described. The methods enable spatial "mapping" of 3 different epitope distribution patterns simultaneously in one tissue section. The key to triple imaging includes: (a) specific immunolabeling with 3 different mouse monoclonal antibodies (mAbs), (b) localization of the antibody binding sites by 3 different dyes, (c) spectral isolation of each dye by using selective band pass or long pass emission filters, (d) computerized imaging of the fluorescences as colored overlays or as selective signals in each optical section through the tissue in the z-direction. Method 1 consists of the combination of fluorescein isothiocyanate (FITC), phycoerythrin R (PE), and Texas Red (TR) as fluorescent markers. These dyes can be imaged by using 488 nm and 543 nm excitation laser lines. In method 2 aminomethyl coumarin acetic acid (AMCA) was combined with FITC and PE. For this application the CLSM was adapted to ultraviolet microscopy that enabled the use of 3 laser lines (364 nm, 488 nm, 543 nm) for excitations. Cryostat sections of diagnostic human muscle biopsies (n = 9) were studied which were normal by ordinary light microscopic examination. Sections were incubated with mAbs specific for: (1) the fast myosin heavy chain (My32); (2) the major histocompatibility class II antigen HLA-DR; (3) the lymph node homing receptor Leu8, and (4) the cell adhesion receptor OKM5 (CD36). By combining these mAbs in triple staining procedures, 3 capillary types and 4 different phenotypes expressed by muscle fibers were identified simultaneously. The mAbs Leu8 and OKM5, widely used as leukocyte typing antibodies in the blood, exhibit hitherto unrecognized specificities for antigens displayed by muscle fibers. At the level of these markers, specific spatial correlations between OKM5 reactive capillaries and both OKM5 reactive and nonreactive muscle fiber types become visible. The presented results provide direct evidence for cellular complexity and novel insight into the immunoanatomical architecture of skeletal muscle. The methods may be of general significance for the construction and quantification of three-dimensional multiparameter "maps" of cells and tissues.     

Characterization of Photoactivated Singlet Oxygen Damage in Single-Molecule Optical Trap Experiments

Optical traps or “tweezers” use high-power, near-infrared laser beams to manipulate and apply forces to biological systems, ranging from individual molecules to cells. Although previous studies have established that optical tweezers induce photodamage in live cells, the effects of trap irradiation have yet to be examined in vitro, at the single-molecule level. In this study, we investigate trap-induced damage in a simple system consisting of DNA molecules tethered between optically trapped polystyrene microspheres. We show that exposure to the trapping light affects the lifetime of the tethers, the efficiency with which they can be formed, and their structure. Moreover, we establish that these irreversible effects are caused by oxidative damage from singlet oxygen. This reactive state of molecular oxygen is generated locally by the optical traps in the presence of a sensitizer, which we identify as the trapped polystyrene microspheres. Trap-induced oxidative damage can be reduced greatly by working under anaerobic conditions, using additives that quench singlet oxygen, or trapping microspheres lacking the sensitizers necessary for singlet state photoexcitation. Our findings are relevant to a broad range of trap-based single-molecule experiments—the most common biological application of optical tweezers—and may guide the development of more robust experimental protocols.     

Elastic fiber formation: a dynamic view of extracellular matrix assembly using timer reporters

To study the dynamics of elastic fiber assembly, mammalian cells were transfected with a cDNA construct encoding bovine tropoelastin in frame with the Timer reporter. Timer is a derivative of the DsRed fluorescent protein that changes from green to red over time and, hence, can be used to distinguish new from old elastin. Using dynamic imaging microscopy, we found that the first step in elastic fiber formation is the appearance of small cell surface-associated elastin globules that increased in size with time (microassembly). The elastin globules are eventually transferred to pre-existing elastic fibers in the extracellular matrix where they coalesce into larger structures (macroassembly). Mechanical forces associated with cell movement help shape the forming, extracellular elastic fiber network. Time-lapse imaging combined with the use of Timer constructs provides unique tools for studying the temporal and spatial aspects of extracellular matrix formation by live cells.