Identification of Optimum Sequencing Depth Especially for De Novo Genome Assembly of Small Genomes Using Next Generation Sequencing Data

Next Generation Sequencing (NGS) is a disruptive technology that has found widespread acceptance in the life sciences research community. The high throughput and low cost of sequencing has encouraged researchers to undertake ambitious genomic projects, especially in de novo genome sequencing. Currently, NGS systems generate sequence data as short reads and de novo genome assembly using these short reads is computationally very intensive. Due to lower cost of sequencing and higher throughput, NGS systems now provide the ability to sequence genomes at high depth. However, currently no report is available highlighting the impact of high sequence depth on genome assembly using real data sets and multiple assembly algorithms. Recently, some studies have evaluated the impact of sequence coverage, error rate and average read length on genome assembly using multiple assembly algorithms, however, these evaluations were performed using simulated datasets. One limitation of using simulated datasets is that variables such as error rates, read length and coverage which are known to impact genome assembly are carefully controlled. Hence, this study was undertaken to identify the minimum depth of sequencing required for de novo assembly for different sized genomes using graph based assembly algorithms and real datasets. Illumina reads for E.coli (4.6 MB) S.kudriavzevii (11.18 MB) and C.elegans (100 MB) were assembled using SOAPdenovo, Velvet, ABySS, Meraculous and IDBA-UD. Our analysis shows that 50X is the optimum read depth for assembling these genomes using all assemblers except Meraculous which requires 100X read depth. Moreover, our analysis shows that de novo assembly from 50X read data requires only 6–40 GB RAM depending on the genome size and assembly algorithm used. We believe that this information can be extremely valuable for researchers in designing experiments and multiplexing which will enable optimum utilization of sequencing as well as analysis resources.     

Comparison of alignment software for genome-wide bisulphite sequence data

Recent advances in next generation sequencing (NGS) technology now provide the opportunity to rapidly interrogate the methylation status of the genome. However, there are challenges in handling and interpretation of the methylation sequence data because of its large volume and the consequences of bisulphite modification. We sequenced reduced representation human genomes on the Illumina platform and efficiently mapped and visualized the data with different pipelines and software packages. We examined three pipelines for aligning bisulphite converted sequencing reads and compared their performance. We also comment on pre-processing and quality control of Illumina data. This comparison highlights differences in methods for NGS data processing and provides guidance to advance sequence-based methylation data analysis for molecular biologists.     

Reducing assembly complexity of microbial genomes with single-molecule sequencing

Background

The short reads output by first- and second-generation DNA sequencing instruments cannot completely reconstruct microbial chromosomes. Therefore, most genomes have been left unfinished due to the significant resources required to manually close gaps in draft assemblies. Third-generation, single-molecule sequencing addresses this problem by greatly increasing sequencing read length, which simplifies the assembly problem.

Results

To measure the benefit of single-molecule sequencing on microbial genome assembly, we sequenced and assembled the genomes of six bacteria and analyzed the repeat complexity of 2,267 complete bacteria and archaea. Our results indicate that the majority of known bacterial and archaeal genomes can be assembled without gaps, at finished-grade quality, using a single PacBio RS sequencing library. These single-library assemblies are also more accurate than typical short-read assemblies and hybrid assemblies of short and long reads.

Conclusions

Automated assembly of long, single-molecule sequencing data reduces the cost of microbial finishing to $1,000 for most genomes, and future advances in this technology are expected to drive the cost lower. This is expected to increase the number of completed genomes, improve the quality of microbial genome databases, and enable high-fidelity, population-scale studies of pan-genomes and chromosomal organization.     

An efficient and tunable parameter to improve variant calling for whole genome and exome sequencing data

Next generation sequencing (NGS) has traditionally been performed in various fields including agricultural to clinical and there are so many sequencing platforms available in order to obtain accurate and consistent results. However, these platforms showed amplification bias when facilitating variant calls in personal genomes. Here, we sequenced whole genomes and whole exomes from ten Korean individuals using Illumina and Ion Proton, respectively to find the vulnerability and accuracy of NGS platform in the GC rich/poor area. Overall, a total of 1013 Gb reads from Illumina and ~39.1 Gb reads from Ion Proton were analyzed using BWA-GATK variant calling pipeline. Furthermore, conjunction with the VQSR tool and detailed filtering strategies, we achieved high-quality variants. Finally, each of the ten variants from Illumina only, Ion Proton only, and intersection was selected for Sanger validation. The validation results revealed that Illumina platform showed higher accuracy than Ion Proton. The described filtering methods are advantageous for large population-based whole genome studies designed to identify common and rare variations associated with complex diseases.     

LOCAS--a low coverage assembly tool for resequencing projects

Motivation

Next Generation Sequencing (NGS) is a frequently applied approach to detect sequence variations between highly related genomes. Recent large-scale re-sequencing studies as the Human 1000 Genomes Project utilize NGS data of low coverage to afford sequencing of hundreds of individuals. Here, SNPs and micro-indels can be detected by applying an alignment-consensus approach. However, computational methods capable of discovering other variations such as novel insertions or highly diverged sequence from low coverage NGS data are still lacking.

Results

We present LOCAS, a new NGS assembler particularly designed for low coverage assembly of eukaryotic genomes using a mismatch sensitive overlap-layout-consensus approach. LOCAS assembles homologous regions in a homology-guided manner while it performs de novo assemblies of insertions and highly polymorphic target regions subsequently to an alignment-consensus approach. LOCAS has been evaluated in homology-guided assembly scenarios with low sequence coverage of Arabidopsis thaliana strains sequenced as part of the Arabidopsis 1001 Genomes Project. While assembling the same amount of long insertions as state-of-the-art NGS assemblers, LOCAS showed best results regarding contig size, error rate and runtime.

Conclusion

LOCAS produces excellent results for homology-guided assembly of eukaryotic genomes with short reads and low sequencing depth, and therefore appears to be the assembly tool of choice for the detection of novel sequence variations in this scenario.     

Paired-End Sequencing of Long-Range DNA Fragments for De Novo Assembly of Large,Complex Mammalian Genomes by Direct Intra-Molecule Ligation

Background

The relatively short read lengths from next generation sequencing (NGS) technologies still pose a challenge for de novo assembly of complex mammal genomes. One important solution is to use paired-end (PE) sequence information experimentally obtained from long-range DNA fragments (>1 kb). Here, we characterize and extend a long-range PE library construction method based on direct intra-molecule ligation (or molecular linker-free circularization) for NGS.

Results

We found that the method performs stably for PE sequencing of 2- to 5- kb DNA fragments, and can be extended to 10–20 kb (and even in extremes, up to ∼35 kb). We also characterized the impact of low quality input DNA on the method, and develop a whole-genome amplification (WGA) based protocol using limited input DNA (<1 µg). Using this PE dataset, we accurately assembled the YanHuang (YH) genome, the first sequenced Asian genome, into a scaffold N50 size of >2 Mb, which is over100-times greater than the initial size produced with only small insert PE reads(17 kb). In addition, we mapped two 7- to 8- kb insertions in the YH genome using the larger insert sizes of the long-range PE data.

Conclusions

In conclusion, we demonstrate here the effectiveness of this long-range PE sequencing method and its use for the de novo assembly of a large, complex genome using NGS short reads.     

Advances in plant chromosome genomics

Next generation sequencing (NGS) is revolutionizing genomics and is providing novel insights into genome organization, evolution and function. The number of plant genomes targeted for sequencing is rising. For the moment, however, the acquisition of full genome sequences in large genome species remains difficult, largely because the short reads produced by NGS platforms are inadequate to cope with repeat-rich DNA, which forms a large part of these genomes. The problem of sequence redundancy is compounded in polyploids, which dominate the plant kingdom. An approach to overcoming some of these difficulties is to reduce the full nuclear genome to its individual chromosomes using flow-sorting. The DNA acquired in this way has proven to be suitable for many applications, including PCR-based physical mapping, in situ hybridization, forming DNA arrays, the development of DNA markers, the construction of BAC libraries and positional cloning. Coupling chromosome sorting with NGS offers opportunities for the study of genome organization at the single chromosomal level, for comparative analyses between related species and for the validation of whole genome assemblies. Apart from the primary aim of reducing the complexity of the template, taking a chromosome-based approach enables independent teams to work in parallel, each tasked with the analysis of a different chromosome(s). Given that the number of plant species tractable for chromosome sorting is increasing, the likelihood is that chromosome genomics – the marriage of cytology and genomics – will make a significant contribution to the field of plant genetics.     

Navigating the tip of the genomic iceberg: Next-generation sequencing for plant systematics

? Premise of the study: Just as Sanger sequencing did more than 20 years ago, next-generation sequencing (NGS) is poised to revolutionize plant systematics. By combining multiplexing approaches with NGS throughput, systematists may no longer need to choose between more taxa or more characters. Here we describe a genome skimming (shallow sequencing) approach for plant systematics. ? Methods: Through simulations, we evaluated optimal sequencing depth and performance of single-end and paired-end short read sequences for assembly of nuclear ribosomal DNA (rDNA) and plastomes and addressed the effect of divergence on reference-guided plastome assembly. We also used simulations to identify potential phylogenetic markers from low-copy nuclear loci at different sequencing depths. We demonstrated the utility of genome skimming through phylogenetic analysis of the Sonoran Desert clade (SDC) of Asclepias (Apocynaceae). ? Key results: Paired-end reads performed better than single-end reads. Minimum sequencing depths for high quality rDNA and plastome assemblies were 40× and 30×, respectively. Divergence from the reference significantly affected plastome assembly, but relatively similar references are available for most seed plants. Deeper rDNA sequencing is necessary to characterize intragenomic polymorphism. The low-copy fraction of the nuclear genome was readily surveyed, even at low sequencing depths. Nearly 160000 bp of sequence from three organelles provided evidence of phylogenetic incongruence in the SDC. ? Conclusions: Adoption of NGS will facilitate progress in plant systematics, as whole plastome and rDNA cistrons, partial mitochondrial genomes, and low-copy nuclear markers can now be efficiently obtained for molecular phylogenetics studies.     

An ensemble strategy that significantly improves de novo assembly of microbial genomes from metagenomic next-generation sequencing data

Next-generation sequencing (NGS) approaches rapidly produce millions to billions of short reads, which allow pathogen detection and discovery in human clinical, animal and environmental samples. A major limitation of sequence homology-based identification for highly divergent microorganisms is the short length of reads generated by most highly parallel sequencing technologies. Short reads require a high level of sequence similarities to annotated genes to confidently predict gene function or homology. Such recognition of highly divergent homologues can be improved by reference-free (de novo) assembly of short overlapping sequence reads into larger contigs. We describe an ensemble strategy that integrates the sequential use of various de Bruijn graph and overlap-layout-consensus assemblers with a novel partitioned sub-assembly approach. We also proposed new quality metrics that are suitable for evaluating metagenome de novo assembly. We demonstrate that this new ensemble strategy tested using in silico spike-in, clinical and environmental NGS datasets achieved significantly better contigs than current approaches.     

Ancient lateral gene transfer in the evolution of Bdellovibrio bacteriovorus

The recently sequenced genome of the predatory delta-proteobacterium Bdellovibrio bacteriovorus provides many insights into its metabolism and evolution. Because its genes are reasonably uniform in G+C content, it was suggested that B. bacteriovorus actively resists recombination with foreign DNA and horizontal transfer of DNA from other bacteria. To investigate this further, we carried out a variety of phylogenetic and comparative genomics analyses using data from >200 microbial genomes, including several published delta-proteobacteria. Although there might be little evidence for the extensive recent transfer of genes, we demonstrate that ancient lateral gene acquisition has shaped the B. bacteriovorus genome to a great extent.     

Hybrid assembly of ultra-long Nanopore reads augmented with 10x-Genomics contigs: Demonstrated with a human genome

The 3rd generation of sequencing (3GS) technologies generate ultra-long reads (up to 1 Mb), which makes it possible to eliminate gaps and effectively resolve repeats in genome assembly. However, the 3GS technologies suffer from the high base-level error rates (15%–40%) and high sequencing costs. To address these issues, the hybrid assembly strategy, which utilizes both 3GS reads and inexpensive NGS (next generation sequencing) short reads, was invented. Here, we use 10×-Genomics® technology, which integrates a novel bar-coding strategy with Illumina® NGS with an advantage of revealing long-range sequence information, to replace common NGS short reads for hybrid assembly of long erroneous 3GS reads. We demonstrate the feasibility of integrating the 3GS with 10×-Genomics technologies for a new strategy of hybrid de novo genome assembly by utilizing DBG2OLC and Sparc software packages, previously developed by the authors for regular hybrid assembly. Using a human genome as an example, we show that with only 7× coverage of ultra-long Nanopore® reads, augmented with 10× reads, our approach achieved nearly the same level of quality, compared with non-hybrid assembly with 35× coverage of Nanopore reads. Compared with the assembly with 10×-Genomics reads alone, our assembly is gapless with slightly high cost. These results suggest that our new hybrid assembly with ultra-long 3GS reads augmented with 10×-Genomics reads offers a low-cost (less than ¼ the cost of the non-hybrid assembly) and computationally light-weighted (only took 109 calendar hours with peak memory-usage = 61GB on a dual-CPU office workstation) solution for extending the wide applications of the 3GS technologies.     

Value of a newly sequenced bacterial genome

Next-generation sequencing(NGS) technologies have made high-throughput sequencing available to medium- and small-size laboratories, culminating in a tidal wave of genomic information. The quantity of sequenced bacterial genomes has not only brought excitement to the field of genomics but also heightened expectations that NGS would boost antibacterial discovery and vaccine development. Although many possible drug and vaccine targets have been discovered, the success rate of genome-based analysis has remained below expectations. Furthermore, NGS has had consequences for genome quality, resulting in an exponential increase in draft(partial data) genome deposits in public databases. If no further interests are expressed for a particular bacterial genome, it is more likely that the sequencing of its genome will be limited to a draft stage, and the painstaking tasks of completing the sequencing of its genome and annotation will not be undertaken. It is important to know what is lost when we settle for a draft genome and to determine the "scientific value" of a newly sequenced genome. This review addresses the expected impact of newly sequenced genomes on antibacterial discovery and vaccinology. Also, it discusses the factors that could be leading to the increase in the number of draft deposits and the consequent loss of relevant biological information.     

SMRT sequencing only de novo assembly of the sugar beet (Beta vulgaris) chloroplast genome

Background

Third generation sequencing methods, like SMRT (Single Molecule, Real-Time) sequencing developed by Pacific Biosciences, offer much longer read length in comparison to Next Generation Sequencing (NGS) methods. Hence, they are well suited for de novo- or re-sequencing projects. Sequences generated for these purposes will not only contain reads originating from the nuclear genome, but also a significant amount of reads originating from the organelles of the target organism. These reads are usually discarded but they can also be used for an assembly of organellar replicons. The long read length supports resolution of repetitive regions and repeats within the organelles genome which might be problematic when just using short read data. Additionally, SMRT sequencing is less influenced by GC rich areas and by long stretches of the same base.

Results

We describe a workflow for a de novo assembly of the sugar beet (Beta vulgaris ssp. vulgaris) chloroplast genome sequence only based on data originating from a SMRT sequencing dataset targeted on its nuclear genome. We show that the data obtained from such an experiment are sufficient to create a high quality assembly with a higher reliability than assemblies derived from e.g. Illumina reads only. The chloroplast genome is especially challenging for de novo assembling as it contains two large inverted repeat (IR) regions. We also describe some limitations that still apply even though long reads are used for the assembly.

Conclusions

SMRT sequencing reads extracted from a dataset created for nuclear genome (re)sequencing can be used to obtain a high quality de novo assembly of the chloroplast of the sequenced organism. Even with a relatively small overall coverage for the nuclear genome it is possible to collect more than enough reads to generate a high quality assembly that outperforms short read based assemblies. However, even with long reads it is not always possible to clarify the order of elements of a chloroplast genome sequence reliantly which we could demonstrate with Fosmid End Sequences (FES) generated with Sanger technology. Nevertheless, this limitation also applies to short read sequencing data but is reached in this case at a much earlier stage during finishing.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-015-0726-6) contains supplementary material, which is available to authorized users.     

Comparison of Hepatocellular Carcinoma miRNA Expression Profiling as Evaluated by Next Generation Sequencing and Microarray

MicroRNA (miRNA) expression profiling has proven useful in diagnosing and understanding the development and progression of several diseases. Microarray is the standard method for analyzing miRNA expression profiles; however, it has several disadvantages, including its limited detection of miRNAs. In recent years, advances in genome sequencing have led to the development of next-generation sequencing (NGS) technologies, which significantly advance genome sequencing speed and discovery. In this study, we compared the expression profiles obtained by next generation sequencing (NGS) with the profiles created using microarray to assess if NGS could produce a more accurate and complete miRNA profile. Total RNA from 14 hepatocellular carcinoma tumors (HCC) and 6 matched non-tumor control tissues were sequenced with Illumina MiSeq 50-bp single-end reads. Micro RNA expression profiles were estimated using miRDeep2 software. As a comparison, miRNA expression profiles for 11 out of 14 HCCs were also established by microarray (Agilent human microRNA microarray). The average total sequencing exceeded 2.2 million reads per sample and of those reads, approximately 57% mapped to the human genome. The average correlation for miRNA expression between microarray and NGS and subtraction were 0.613 and 0.587, respectively, while miRNA expression between technical replicates was 0.976. The diagnostic accuracy of HCC, p-value, and AUC were 90.0%, 7.22×10⁻⁴, and 0.92, respectively. In summary, NGS created an miRNA expression profile that was reproducible and comparable to that produced by microarray. Moreover, NGS discovered novel miRNAs that were otherwise undetectable by microarray. We believe that miRNA expression profiling by NGS can be a useful diagnostic tool applicable to multiple fields of medicine.     

MetaCluster 4.0: a novel binning algorithm for NGS reads and huge number of species

Next-generation sequencing (NGS) technologies allow the sequencing of microbial communities directly from the environment without prior culturing. The output of environmental DNA sequencing consists of many reads from genomes of different unknown species, making the clustering together reads from the same (or similar) species (also known as binning) a crucial step. The difficulties of the binning problem are due to the following four factors: (1) the lack of reference genomes; (2) uneven abundance ratio of species; (3) short NGS reads; and (4) a large number of species (can be more than a hundred). None of the existing binning tools can handle all four factors. No tools, including both AbundanceBin and MetaCluster 3.0, have demonstrated reasonable performance on a sample with more than 20 species. In this article, we introduce MetaCluster 4.0, an unsupervised binning algorithm that can accurately (with about 80% precision and sensitivity in all cases and at least 90% in some cases) and efficiently bin short reads with varying abundance ratios and is able to handle datasets with 100 species. The novelty of MetaCluster 4.0 stems from solving a few important problems: how to divide reads into groups by a probabilistic approach, how to estimate the 4-mer distribution of each group, how to estimate the number of species, and how to modify MetaCluster 3.0 to handle a large number of species. We show that Meta Cluster 4.0 is effective for both simulated and real datasets. Supplementary Material is available at www.liebertonline.com/cmb.     

Sequencing XMET genes to promote genotype-guided risk assessment and precision medicine

High-throughput next generation sequencing(NGS) is a shotgun approach applied in a parallel fashion by which the genome is fragmented and sequenced through small pieces and then analyzed either by aligning to a known reference genome or by de novo assembly without reference genome. This technology has led researchers to conduct an explosion of sequencing related projects in multidisciplinary fields of science. However, due to the limitations of sequencing-based chemistry, length of sequencing reads and the complexity of genes, it is difficult to determine the sequences of some portions of the human genome, leaving gaps in genomic data that frustrate further analysis. Particularly, some complex genes are difficult to be accurately sequenced or mapped because they contain high GC-content and/or low complexity regions, and complicated pseudogenes, such as the genes encoding xenobiotic metabolizing enzymes and transporters(XMETs). The genetic variants in XMET genes are critical to predicate interindividual variability in drug efficacy, drug safety and susceptibility to environmental toxicity. We summarized and discussed challenges, wet-lab methods, and bioinformatics algorithms in sequencing "complex" XMET genes, which may provide insightful information in the application of NGS technology for implementation in toxicogenomics and pharmacogenomics.