Kinetics of the biodegradation of phenol in wastewaters from the chemical industry by covalently immobilized <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> cells

A simple method for the preparation of the biocatalyst with whole cells is presented, and the applicability of the technique for biodegradation of phenol in wastewater from the chemical industries using the basidomycetes yeast Trichosporon cutaneum is explored. Kinetic studies of the influence of other compounds contained in wastewater as naphthalene, benzene, toluene and pyridine indicate that apart from oil fraction, which is removed, the phenol concentration is the only major factor limiting the growth of immobilized cells. Mathematical models are applied to describe the kinetic behavior of immobilized yeast cells. From the analysis of the experimental curves was shown that the obtained values for the apparent rate parameters vary depending on the substrate concentration (μ_maxapp from 0.35 to 0.09 h⁻¹ and K _sapp from 0.037 to 0.4 g dm⁻³). The inhibitory effect of the phenol on the obtained yield coefficients was investigated too. It has been shown that covalent immobilization of T. cutaneum whole cells to plastic carrier beads is possible, and that cell viability and phenol degrading activity are maintained after the chemical modification of cell walls during the binding procedure. The results obtained indicate a possible future application of immobilized T. cutaneum for destroying phenol in industrial wastewaters.     

Expression,purification and immobilization of the intracellular invertase INVA,from <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> on crystalline cellulose and Nylon-6

This paper presents two immobilization methods for the intracellular invertase (INVA), from Zymomonas mobilis. In the first method, a chimeric protein containing the invertase INVA, fused through its C-terminus to CBD _Cex from Cellulomonas fimi was expressed in Escherichia coli strain BL21 (DE3). INVA was purified and immobilized on crystalline cellulose (Avicel) by means of affinity, in a single step. No changes were detected in optimal pH and temperature when INVA-CBD was immobilized on Avicel, where values of 5.5 and 30 °C, respectively, were registered. The kinetic parameters of the INVA-CBD fusion protein were determined in both its free form and when immobilized on Avicel. K _m and V _max were affected with immobilization, since both showed an increase of up to threefold. Additionally, we found that subsequent to immobilization, the INVA-CBD fusion protein was 39% more susceptible to substrate inhibition than INVA-CBD in its free form. The second method of immobilization was achieved by the expression of a 6xHis-tagged invertase purified on Ni-NTA resin, which was then immobilized on Nylon-6 by covalent binding. An optimal pH of 5.5 and a temperature of 30 °C were maintained, subsequent to immobilization on Nylon-6 as well as with immobilization on crystalline cellulose. The kinetic parameters relating to V _max increased up to 5.7-fold, following immobilization, whereas K _m increased up to 1.7-fold. The two methods were compared showing that when invertase was immobilized on Nylon-6, its activity was 1.9 times that when immobilized on cellulose for substrate concentrations ranging from 30 to 390 mM of sucrose.     

Enhanced biodegradation of phenol by magnetically immobilized <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis>

Aromatic compounds are abundant in aqueous environments due to natural resources or different manufacturer’s wastewaters. In this study, phenol degradation by the yeast, Trichosporon cutaneum ADH8 was compared in three forms namely: free cells, nonmagnetic immobilized cells (non-MICs), and magnetically immobilized cells (MICs). In addition, three different common immobilization supports (alginate, agar, and polyurethane foams) were used for cell stabilization in both non-MICs and MICs and the efficiency of phenol degradation using free yeast cells, non-MICs, and MICs for ten consecutive cycles were studied. In this study, MICs on alginate beads by 12 g/l Fe₂O₃ magnetic nanoparticles had the best efficiency in phenol degradation (82.49%) and this amount in the seventh cycle of degradation increased to 95.65% which was the highest degradation level. Then, the effect of magnetic and nonmagnetic immobilization on increasing the stability of the cells to alkaline, acidic, and saline conditions was investigated. Based on the results, MICs and non-MICs retained their capability of phenol degradation in high salinity (15 g/l) and acidity (pH 5) conditions which indicating the high stability of immobilized cells to those conditions. These results support the effectiveness of magnetic immobilized biocatalysts and propose a promising method for improving the performance of biocatalysts and its reuse ability in the degradation of phenol and other toxic compounds. Moreover, increasing the resistance of biocatalysts to extreme conditions significantly reduces costs of the bioremediation process.     

Receptor elements for biosensors in two ways of methylotrophic yeast immobilization

Receptor elements for biosensors based on Hansenula polymorpha NCYC 495 ln yeast cells for ethanol assay were developed using two ways of cell immobilization, i.e., physical adsorption on a glass fiber membrane and covalent binding on a modified nitrocellulose membrane. The linear diapason of ethanol assays for a biosensor based on yeast cells adsorbed on glass fiber was 0.05–1.18; for a biosensor based on yeasts immobilized on a nitrocellulose membrane, 0.2–1.53 mM. Receptor elements based on sorbed cells possessed 2.5 times higher long-term stability. The time response was 1.5 times less for cells immobilized using DEAE-dextran and benzoquinone. The results of ethyl alcohol assays using biosensors based on cells immobilized via adsorption and covalent binding, as well as using the standard areometric method, had high correlation coefficients (0.998 and 0.997, respectively, for the two ways of immobilization). The results indicate the possibility to consider the described models of receptor elements for biosensors as prototypes for experimental samples for practical use.     

Entrapment of purified novel dextransucrase obtained from newly isolated Acetobacter tropicalis and its comparative study of kinetic parameters with free enzyme

Abstract

Purified Acetobacter tropicalis dextransucrase was immobilized in different matrices viz. calcium-alginate, κ-carrageenan, agar, agarose and polyacrylamide. Calcium-alginate was proved to be superior to the other matrices for immobilization of dextransucrase enzyme. Standardization of immobilization conditions in calcium-alginate resulted in 99.5% relative activity of dextransucrase. This is the first report with such a large amount of relative activity as compared to the previous reports. The immobilized enzyme retained activity for 11 batch reactions without a decrease in activity which suggested that enzyme can be used repetitively for 11 cycles. The dextransucrase was also characterized, which revealed that enzyme worked best at pH 5.5 and 37?°C for 30?min in both the free as well as immobilized state. Calcium-alginate immobilized dextransucrase of A. tropicalis showed the K_m and V_max values of 29?mM and 5000?U/mg, respectively. Free and immobilized enzyme produced 5.7?mg/mL and 2.6?mg/mL of dextran in 2?L bench scale fermenter under optimum reaction conditions. This immobilization method is very unconventional for purified large molecular weight dextran-free dextransucrase of A. tropicalis as this method is used usually for cells. Such reports on entrapment of purified enzyme are rarely documented.     

Protease production by free and immobilized cells of the cold-adapted yeast Cryptococcus victoriae CA-8

The present study was performed to produce the protease using free and immobilized cells of locally isolated cold-adapted psychrotolerant yeast Cryptococcus victoriae CA-8. Cell immobilization was performed using sodium alginate as entrapping agent. The best conditions for enzyme production by both free and immobilized cells of the yeast were temperature of 15°C and initial pH of 8.0. The optimal incubation times were 72 and 96 h for immobilized and free cells, respectively. Immobilized cells were reused in 3 successive reaction cycles without any loss in the maximum protease activity. Little decreases in the protease activity were observed in 4 and 5 cycles. Under the optimized conditions, the maximum enzyme activities were determined as 12.1 and 13.5 U/mL for free and immobilized cells, respectively. This is a first attempt on cold-active alkaline protease production by free and/or immobilized cells of yeasts. Besides, the protease activity of the yeast C. victoriae CA-8 was investigated for the first time in the present study.     

Immobilized catalase-containing yeast cells: Preparation and enzymatic properties

The cell of Saccharomyces cerevisiae previously induced for catalase (EC 1.11.1.6) activity were immobilized by entrapment of intact cells in acrylamide polymerized by γ irradiation (100 kR). Yeast cells showed an enhancement in catalase activity on entrapment, an effect similar to that observed on treatment with organic solvents like toluene. The cells pretreated with toluene, however, showed complete loss of catalase activity on entrapment. The entrapped enzyme exhibited a narrow pH optimum, reduced K_m for H₂O₂, and a decrease in thermostability. The temperature optimum of catalase was also decreased from 60 to 40°C on immobilization. A tenfold decrease in the activation energy was also observed. The enzyme in the entrapped cells was, however, stable toward inactivation by γ irradiation. Unlike the intact cells, the entrapped yeast cells did not have the ability to induce catalase.     

Degradation of malic acid in wine by immobilized Issatchenkia orientalis cells with oriental oak charcoal and alginate

Aims: To test degradation of malic acid content in wine by immobilized Issatchenkia orientalis KMBL 5774 cells recently isolated from Korean wine pomace as a malic acid‐degrading yeast. Methods and Results: I. orientalis KMBL 5774 cells were immobilized using a mixture of oriental oak (Quercus variabilis) charcoal with sodium alginate. When the immobilized yeast cells were observed on a scanning electron microscope, cells were efficiently immobilized on the surface area of the charcoal. A Korean wine containing a high level of malic acid was treated with the immobilized yeast cells. The HPLC analysis of the malic acid content in the treated wine showed the malic acid content was reduced to 0·75 mg ml^?1 after treatment from the original content of 8·96 mg ml^?1, representing 91·6% of the malic acid was degraded during the treatment. Conclusions: The immobilization of the malic acid‐degrading yeasts with oriental oak charcoal and sodium alginate is useful for degradation of malic acid in wines containing a high level of malic acid with no significant increase in other acids. Significance and Impact of the study: Malic acid is sometimes detrimental to the quality of wines when present at high concentrations in some varieties. The immobilized I. orientalis KMBL5774 cells appear to be a promising candidate in view of developing biotechnological methods for reduction of malic acid contents in wine.     

Non-porous magnetic supports for cell immobilization

A new method for covering magnetic particles with a stable non-porous layer of a material like zeolite or activated carbon was used for the preparation of support materials with good properties for the immobilization of yeast Saccharomyces cerevisiae cells. The immobilized cells can be used in batch and continuous alcoholic fermentation. A productivity of 35.6 g ethanol/l · h was reached. The adsorption isotherms of the immobilized yeast cells were determined. Yeast cell immobilization on non-porous magnetic supports obeyed the Langmuir isotherm equation. Satisfactory results were obtained also from repeated batch fermentations with fixed cells on supports additionally treated with glutaraldehyde or by simple adsorption.     

Nitrate removal by immobilized cells of Phormidium uncinatum in batch culture and a continuous-flow photobioreactor

Cells of the non-N₂-fixing cyanobacterium Phormidium uncinatum were immobilized by adsorption into polyvinyl (PV-50) foam pieces. The effect of inoculum size as well as the initial inoculum/support ratio on the cell immobilization process was investigated. After 2 months of immobilization similar net O₂-exchange activity was measured in immobilized and free-living cells. Polyvinyl-adsorbed cells also showed similar nitrate uptake capacity to free-living cells. Nitrogen starvation promoted a remarkable increase in nitrate uptake rate of both free-living and immobilized cells. A lab-scale photobioreactor packed with polyvinyl foam pieces colonized in situ by cells was used for nitrate removal in a continuous mode. In the best working conditions found, nearly 90% of nitrate supplied in the influent (50 mg l^–1) was removed by cells having a residence time of 3–4 h. Correspondence to: J. L. Serra     

The effect of covalent immobilization on ethanol-induced,leakage in saccharomyces cerevisiae

Ethanol-induced leakage of UV-absorbing compounds from free and immobilized Saccharomyces cerevisiae cells was studied. The resistance of immobilized cells to this ethanol effect is accompanied with increased levels of phospholipids and sterols. These results suggest a positive role of whole cell immobilization in improving yeast ethanol tolerance.     

Production of molecular hydrogen with immobilized cells ofRhodospirillum rubrum

Summary Cells ofRhodospirillum rubrum have been immobilized in various gels and tested for photobiological hydrogen production. Agar proved to be the best immobilizing agent with respect to production rates as well as stability. Agar immobilized cells were also superior compared to liquid suspension cultures. Growth conditions of the cells prior to immobilization, e.g. cell age, light intensity or nutrient composition, were of primary importance for the activity in the later immobilized state. A reactor with agar immobilized cells has been operated successfully over 3000 h with a loss of the activity of about 60%. Mean rates for hydrogen production for immobilized cells in this work during the first 60 to 70 hours after immobilization were in the range of 18 to 34 μl H₂ mg⁻¹ d.w. h⁻¹ and thus by a factor of up to 2 higher than liquid cultures under the same conditions. Maximal rates of hydrogen production (57 μl H₂ ml⁻¹ immobilized cell suspension) were reached in agar gel beads with cells immobilized after 70 h growth in liquid culture in the light and a cell density of 1.0 mg ml⁻¹, 70 h after immobilization.     

Glutathione production by immobilized Saccharomyces cerevisiae cells containing an ATP regeneration system

Summary Whole cells of Saccharomyces cerevisiae were immobilized in polyacrylamide gel. Consuming glucose, the immobilized cells produced glutathione from its constituent amino acids, and glutathione produced was excreted out of the gels. The conditions for immobilization of the yeast cells and for glutathione production were studied. Based on these data, the properties and the feasibility of the glycolytic pathway as an ATP regeneration system were discussed in reference to glutathione production.     

Characteristics of immobilized Rhizopus oryzae in polyurethane foam cubes

Summary Rhizopus oryzae was immobilized in polyurethane foam cubes. The effects of the cube size on cell immobilization, cell growth and L(+)-lactic acid production were studied. By the natural attachment method, R. oryzae could be easily immobilized in the polyurethane foam cubes larger than 2.5 × 5 × 5 mm³. The use of small cubes for R. oryzae immobilization was very effective to increase the productivity of L(+)-lactic acid by the immobilized cells. Although it was difficult for smaller cubes to be completely full of the mycelia, increasing the inoculum size in immobilizations was effective to increase the immobilization ratio (a ratio of the number of the cubes containing cells to the total number of cubes).     

Degradation of Carbazole by Microbial Cells Immobilized in Magnetic Gellan Gum Gel Beads

Polycyclic aromatic heterocycles, such as carbazole, are environmental contaminants suspected of posing human health risks. In this study, we investigated the degradation of carbazole by immobilized Sphingomonas sp. strain XLDN2-5 cells. Four kinds of polymers were evaluated as immobilization supports for Sphingomonas sp. strain XLDN2-5. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, Fe₃O₄ nanoparticles were prepared by a coprecipitation method, and the average particle size was about 20 nm with 49.65-electromagnetic-unit (emu) g⁻¹ saturation magnetization. When the mixture of gellan gel and the Fe₃O₄ nanoparticles served as an immobilization support, the magnetically immobilized cells were prepared by an ionotropic method. The biodegradation experiments were carried out by employing free cells, nonmagnetically immobilized cells, and magnetically immobilized cells in aqueous phase. The results showed that the magnetically immobilized cells presented higher carbazole biodegradation activity than nonmagnetically immobilized cells and free cells. The highest biodegradation activity was obtained when the concentration of Fe₃O₄ nanoparticles was 9 mg ml⁻¹ and the saturation magnetization of magnetically immobilized cells was 11.08 emu g⁻¹. Additionally, the recycling experiments demonstrated that the degradation activity of magnetically immobilized cells increased gradually during the eight recycles. These results support developing efficient biocatalysts using magnetically immobilized cells and provide a promising technique for improving biocatalysts used in the biodegradation of not only carbazole, but also other hazardous organic compounds.     

Removal and assessment of toxicity of Cu and Fe toAnabaena doliolum andChlorella vulgaris using free and immobilized cells

Alginate-immobilized and free cells ofAnabaena doliolum andChlorella vulgaris were compared for their use in the removal and toxicity bioassays of Cu and Fe. A decrease in toxicity with regard to growth and uptake of NO ₃ ^– and NH ₄ ⁺ was noticed following immobilization of both the organisms. In contrast, immobilized cells had higher uptake rates of Cu and Fe suggesting that immobilization offers protection against metal toxicity. Compared with free cells, the immobilized cells showed greater efficiency for metal removal, even over three repeated cycles, though with a gradual decrease in efficiency in the second and third cycles. This reduction in removal efficiency was, however, more pronounced for Fe withA. doliolum and for Cu withC. vulgaris. The ease in harvesting and potential for repeated use makes the immobilized cells good tools for scavenging heavy metals from metal-contaminated environments.     

Recovery of uranium by immobilized microorganisms

Summary Some attempts were made to recover uranium from sea and fresh water using immobilized Streptomyces viridochromogenes and Chlorella regularis cells. The cells immobilized in polyacrylamide gel have the most favorable features for uranium recovery; high adsorption ability, good mechanical properties, and applicability in a column system. The adsorption of uranium by the immobilized cells is not affected by the pH values between 4 and 9. These results show that uranium adsorption becomes independent of pH after immobilization. The amounts of uranium adsorbed by the immobilized cells increased linearly with temperature, suggesting that the adsorption of uranium by the immobilized cells is an endothermic reaction. The immobilized cells can recover uranium almost quantitatively from both fresh and sea water containing uranium, and almost all uranium adsorbed is desorbed with a solution of Na₂CO₃. Thus the immobilized cells of Streptomyces and Chlorella can be used repeatedly in adsorption-desorption process.Studies on the Accumulation of Heavy Metal Elements in Biological Systems. XXI     

A new method for immobilization of acetylcholinesterase

A new method for immobilization of acetylcholinesterase (AChE) to alginate gel beads by activating the carbonyl groups of alginate using carbodiimide coupling agent has been successfully developed. Maximum reaction rate (V _max) and Michaelis–Menten constant (K _m) were determined for the free and binary immobilized enzyme. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized AChE were also investigated. For the free and binary immobilized enzyme on the Ca–alginate gel beads, optimum pH values were found to be 7 and 8, respectively. Optimum temperatures for the free and immobilized enzyme were observed to be 30 and 35 °C, respectively. Upon 60 days of storage the preserved activity of free and immobilized enzyme were found as 4 and 68%, respectively. In addition, reuse number, and thermal stability of the free AChE were increased by as a result of binary immobilization.     

Comparison of ethanol tolerance of free and immobilizedSaccharomyces uvarum yeasts

O₂ consumption and CO₂ production of free and immobilizedSaccharomyces uvarum in the presence of ethanol were compared. The protective effect of immobilization on the yeast ethanol tolerance at 5–20% of ethanol was more evident in CO₂ production than in O₂ consumption. CO₂ production by the yeast immobilized in calcium alginate and calcium pectate gel beads was approximately 2.5-times higher than by the free yeast at 5 and 10% of ethanol. 4-Fold increase of CO₂ production was observed at 15% ethanol. Immobilization in calcium-containing carriers (alginate, pectate) resulted in enhanced activities of yeasts compared to the κ-carrageenan carrier.     

Immobilization of proteins by reductive alkylation with hydrophobic aldehydes

A new method is described for the immobilization of enzymes and other proteins onto hydrophobic gels. Trypsin, for example, can be quantitatively immobilized by reaction with sodium cyanoborohydride and dodecyladehyde-coated Octyl-Sepharose. Noncovalent interactions between the hydrophobic gel and approximately 10 resulting dodecylamino groups in the modified enzyme bind it very strongly but do not affect its ability to hydrolyze benzolarginine ethyl ester. The same procedure can also be used to immobilize E. Coli asparaginase and yeast alcohol dehydrogenase in high yield.