Construction of a shuttle vector for inducible gene expression in Escherichia coli and Bacillus subtilis

The construction of a shuttle vector for inducible gene expression allowing fast and easy cloning in Escherichia coli and subsequent transformation of Bacillus subtilis is presented. The expression is based on the regulation of the tac promoter by the Lac repressor which was assayed with the xylE gene from Pseudomonas putida as a marker gene. The lacIq gene, transcribed by the strong spo promoter, allowed full repression of the weak tac promoter.     

Construction of a new shuttle vector pSTE33 and its stabilities in Bacillus stearothermophilus,bacillus subtilis,and Escherichia coli

Summary A shuttle vector that could replicate in B. stearothermophilus, B. subtilis, and E. coli was constructed from B. stearothermophilus cryptic plasmid pSTK1, E. coli vector pUC19, and a thermostable kanamycin-resistance marker. This new vector was stably maintained in B. stearothermophilus at 67°C without selective pressure.     

Construction of a promoter-probe shuttle vector for Escherichia coli and brevibacteria

We constructed a promoter-probe vector, pJUP05, for brevibacteria and Escherichia coli based on the promoterless neomycin-resistance (neoR) gene from Tn5. This gene confers resistance to the aminoglycosides, kanamycin and neomycin. The promoter of the neoR gene was deleted and replaced by a suitable multiple cloning site. There are translation stop codons in all three reading frames upstream from the neoR gene. The plasmid contains functional origins of DNA replication for both brevibacteria and E. coli, and permits selection for chloramphenicol- and/or ampicillin-resistance markers.     

Construction of a novel gene bank of Bacillus subtilis using a low copy number vector in Escherichia coli

Low copy number vector plasmid pCT571 was constructed to clone Bacillus subtilis genomic fragments in Escherichia coli. pCT571 confers KmR, TcR and CmR in E. coli and CmR in B. subtilis. It has unique restriction sites within the KmR and TcR markers to allow screening for recombinant plasmids by insertional inactivation of these genes. It contains the pSC101 replicon and replicates normally at six to eight copies per chromosome equivalent in E. coli. It also contains oriVRK2, which when supplied with the product of the trfA gene of RK2 in trans, allows pCT571 to replicate at 35-40 copies per chromosome equivalent. A B. subtilis gene bank was created by cloning partially Sau3A-digested and size-fractionated fragments of B. subtilis chromosomal DNA into the BamHI site of pCT571. DNA from 1097 KmR TcS transformants was extracted and analysed electrophoretically as supercoiled DNA and after digesting with EcoRI or EcoRI and SalI. Approximately 1000 hybrid plasmids were found with reasonably sized B. subtilis fragments. The mean size of the inserts in pCT571 is 8 kb, ranging from 4 to 20 kb in different plasmids. The gene bank covers most of the B. subtilis chromosome, as demonstrated by the results of screening the gene bank for selectable nutritional markers in E. coli and B. subtilis. Hybrid plasmids which complement E. coli mutants for arg, his, lys, met, pdx, pyr and thr markers were identified from the gene bank. In B. subtilis the presence of argC, cysA, dal, hisA, ilvA, leuA, lys, metB, metC, phe, purA, purB, thr and trpC was established by transformation experiments. The effects of copy number on cloning and long-term maintenance in the bacterial strains were also investigated. At high copy number some hybrid plasmids cannot be maintained at all, while others show an increased rate of structural deletions and rearrangements.     

Novel broad host range shuttle vectors for expression in Escherichia coli, Bacillus subtilis and Pseudomonas putida

Novel shuttle vectors named pEBP were constructed to allow the gene expression in different bacterial hosts including Escherichia coli, Bacillus subtilis and Pseudomonas putida. These vectors share the inducible promoters P(T7) and P(Xyl) and a cos site to enable packaging of plasmid DNA into phage, and carry different multiple cloning sites and antibiotic resistance genes. Vector pEBP41 generally replicates episomally while pEBP18 replicates episomally in Gram-negative bacteria only, but integrates into the chromosome of B. subtilis. Plasmid copy numbers determined for E. coli and P. putida were in the range of 5-50 per cell. The functionality of pEBP18 and pEBP41 was confirmed by expression of two lipolytic enzymes, namely lipase A from B. subtilis and cutinase from the eukaryotic fungus Fusarium solani pisi in three different host strains. Additionally, we report here the construction of a T7 RNA polymerase-based expression strain of P. putida.     

Construction of a new high-copy number shuttle vector of Bacillus thuringiensis

AIMS: Construction and characterization of a new cloning shuttle vector for gene transfer and expression in Bacillus thuringiensis. METHODS AND RESULTS: A novel short and high-copy number shuttle vector called pHBLBIV, was constructed for gene transfer and expression in Bacillus thuringiensis. A 1.6-kbp replicon of a relatively high-copy number endogenous plasmid of a selected B. thuringiensis strain was ligated to Escherichia coli pUC18 replicon containing the ampicillin and the erythromycin resistance genes used for the selection of respectively E. coli and B. thuringiensis transformants. The constructed vector was shown to have a high copy number compared with the conventional B. thuringiensis vectors, and used successfully for the transfer of vegetative insecticidal protein-encoding gene (vip) in between B. thuringiensis strains. CONCLUSIONS: A new shuttle vector of B. thuringiensis-E. coli named pHBLBIV was constructed. It was characterized by its high copy number, small size and segregational stability. This vector was successfully used for vip gene cloning and transfer in B. thuringiensis. SIGNIFICANCE AND IMPACT OF THE STUDY: A novel shuttle vector has been constructed, which has demonstrated potential for the cloning and expression of genes in B. thuringiensis.     

Construction of a genetically engineered microorganism for CO2 fixation using a Rhodopseudomonas/Escherichia coli shuttle vector

The CO2 fixation ability of Rhodopseudomonas palustris DH was enhanced by introducing the recombinant plasmid pMG-CBBM containing the form II ribulose-1,5-bisphosphate carboxylase/oxygenase (RubisCO) gene (cbbM) isolated from Rps. palustris NO. 7. Sequencing of a 3.0-kb PstI fragment containing the cbbM gene revealed an open reading frame encoding 461 amino acids, homologous to known cbbM genes, with a ribosome binding site upstream of cbbM and a terminator downstream of cbbM, without promoter. pMG-CBBM, a Rhodopseudomonas/Escherichia coli shuttle expression plasmid, was derived from the Rhodopseudomonas/E. coli shuttle cloning vector pMG105, by inserting the promoter of the pckA gene and the cbbM gene into its multiple cloning site. Plasmid pMG-CBBM was transformed into Rps. palustris DH by electroporation, and was stably maintained when transformants were grown either photoheterotrophically or photolithoautotrophically in the absence of antibiotics. This is the first report of an expression plasmid containing a Rps. palustris-specific promoter that allows stable expression of a foreign gene in the absence of antibiotic selection.     

New shuttle vectors for Bacillus subtilis and Escherichia coli which allow rapid detection of inserted fragments

Two new shuttle vectors have been constructed by fusing the Escherichia coli plasmid pUC9 with the Staphylococcus aureus plasmids pU110 and pC194. The resulting hybrids replicate in both E. coli and Bacillus subtilis and contain seven restriction sites within a part of the lacZ gene. Insertion of foreign DNA into those sites can be easily detected in E. coli and hybrid plasmids can subsequently be transformed into B. subtilis.     

High-level expression of Escherichia coli and Bacillus subtilis thymidylate synthases

Procedures are described for the preparation of highly purified thymidylate synthases from Escherichia coli and Bacillus subtilis. The yields in each case are quite high with about 350 mg of pure protein obtained from 1 liter of cells. Basically all that is required to obtain pure enzyme is an induction step from a high-expression vector, followed by a DE-52 column elution. Both enzymes appeared to be fairly stable in that incubation at 43 degrees C for 10 min resulted in the loss of 50% of the E. coli thymidylate synthase activity, while 50 degrees C for 10 min was required to obtain the same effect with the B. subtilis enzyme. In the presence of the substrate, dUMP, each protein was stabilized further by 6 to 7 degrees C, which was increased to 9 to 10 degrees C on addition of dihydrofolate. It was shown also that the E. coli thymidylate synthase could be maintained at 4 degrees C for at least 4 months with little or no loss in activity provided that mercaptoethanol was not present. The presence of the latter led to a progressive loss in activity until little activity could be detected after 18 weeks, which was due, in part, to the formation of a disulfide bond with the active site cysteine. Addition of dithiothreitol restored the enzyme activity to its original state.     

A modular polycistronic expression system for overexpressing protein complexes in Escherichia coli

To facilitate studies of multicomponent protein complexes, I have developed an Escherichia coli expression system which coexpresses up to four polypeptides from a single plasmid. The modular nature of the system enables efficient subcloning of a gene into each of the 4 cassettes in the polycistronic expression vector. Restriction sites present in the polycistronic expression vector allow both affinity tagged and untagged complexes to be overexpressed. I demonstrate successful use of the expression system for binary and ternary complexes, including the reconstitution of the VHL-elonginC-elonginB complex in E. coli and purification of the complex by affinity and ion-exchange chromatography. This polycistronic expression system should provide an important alternative to in vitro reconstitution of multicomponent complexes.     

Creating new genes by plasmid recombination in Escherichia coli and Bacillus subtilis

Gene shuffling is a way of creating proteins with interesting new characteristics, starting from diverged sequences. We tested an alternative to gene shuffling based on plasmid recombination and found that Bacillus subtilis efficiently recombines sequences with 4% divergence, and Escherichia coli mutS is more appropriate for sequences with 22% divergence.     

Construction and characterization of a Mycobacterium-Escherichia coli shuttle vector

We have constructed a set of novel Mycobacterium-Escherichia coli shuttle vectors using either a kanamycin- or hygromycin-resistance gene and the replication region from a Corynebacterium plasmid. Important features of these new vectors (pEP2 and pEP3) are that they are small, contain multiple cloning sites, and replicate to high copy number in various Mycobacterium species and E. coli. These vectors are unusual in that plasmid replication in gram-negative and gram-positive bacteria appears to be controlled from a single region. These plasmids will be useful for the genetic analysis of Mycobacterium and gene expression in this genus, particularly Mycobacterium bovis BCG.     

Construction of a green-fluorescent protein-based, insertion-inactivation shuttle vector for lactic acid bacteria and Escherichia coli

A shuttle vector, p5aGFP2201a, for lactic acid bacteria and E. coli was constructed by using the gene of a jellyfish green fluorescent protein ( gfp) as a selection marker. The plasmid was shown to function as a shuttle vector by its ability to carry and express a staphylococcal chloramphenicol acetyltransferase ( cat) gene into targeted hosts.     

Bioimmobilization of keratinase using Bacillus subtilis and Escherichia coli systems

Immobilized keratinase can improve stability while retaining its proteolytic and keratinolytic properties. Conventional purification followed by chemical immobilization is a laborious and costly process. A new genetic construct was developed to produce the keratinase-streptavidin fusion protein. Consequently, the purification and immobilization of the fusion protein onto a biotinylated matrix can be accomplished in a single step. The method was tested in both the Bacillus subtilis and Escherichia coli systems. In B. subtilis, the fusion protein was produced extracellularly and readily immobilized from the medium. In E. coli, the fusion protein was produced intracellularly in inclusion bodies; additional separation and renaturation processes were required prior to immobilization from the cell extract. The overall efficiencies were approximately the same, 24-28%, using both systems.     

Construction of a new shuttle vector for Lactobacillus.

To clone the malolactic enzyme gene from Lactobacillus sp. 89, construction of a shuttle vector able to express itself in Lactobacillus sp. 89 and Escherichia coli was undertaken. The shuttle plasmid pLE16 resulted from the union of pBR328 and of the pLB10 plasmid extracted from Lactobacillus bulgaricus 10. The bacterial transformation in Lactobacillus sp. 89 was performed by electroporation, and the clones were selected on MRS medium with 30 micrograms.mL-1 chloramphenicol added. Fifty percent of the clones from Lactobacillus sp. 89 lost their resistance to chloramphenicol following 28 generations when the selection pressure was not maintained. The restriction map of pLE16 (7600 bp) was established using several restriction enzymes.     

Development of a new shuttle plasmid system for Escherichia coli and Clostridium perfringens.

We constructed a 7.9-kilobase-pair recombinant shuttle plasmid, designated pHR106, by combining desired segments of three plasmids: an Escherichia coli plasmid (pSL100) which provides a multiple cloning site, a Clostridium perfringens plasmid (pJU122) which provides a clostridial origin of replication, and an E. coli plasmid (pJIR62) which provides an E. coli origin of replication, an ampicillin resistance gene, and a chloramphenicol resistance gene of clostridial origin. The shuttle plasmid transformed E. coli HB101 with a frequency of 1 transformant per 10(4) viable cells and C. perfringens L-phase strain L-13 with a frequency of approximately 1 transformant per 10(6) viable cells. Because of the set of unique cloning sites and the chloramphenicol resistance marker, this shuttle plasmid should be particularly useful for studies of gene regulation and for enzyme production with C. perfringens.