Molecular beacons for DNA biosensors with micrometer to submicrometer dimensions

Ultrasensitive molecular beacon (MB) DNA biosensors, with micrometer to submicrometer sizes, have been developed for DNA/RNA analysis. The fluorescence-based biosensors have been applied in DNA/ RNA detection without the need for a dye-labeled target molecule or an intercalation reagent in the testing solution. Molecular beacons are hairpin-shaped oligonucleotides that report the presence of specific nucleic acids. We have designed a surface-immobilizable biotinylated ssDNA molecular beacon for DNA hybridization at a liquid-solid interface. The MBs have been immobilized onto ultrasmall optical fiber probes through avidin-biotin binding. The MB DNA biosensor has been used directly to detect, in real time, its target DNA molecules without the need for a competitive assay. The biosensor is stable and reproducible. The MB DNA biosensor has selectivity with single base-pair mismatch identification capability. The concentration detection limits and mass detection limits are 0.3 nM and 15 amol for a 105-microm biosensor, and 10 nM and 0.27 amol for a submicrometer biosensor, respectively. We have also prepared molecular beacon DNA biosensor arrays for simultaneous analysis of multiple DNA sequences in the same solution. The newly developed DNA biosensors have been used for the precise quantification of a specific rat gamma-actin mRNA sequence amplified by the polymerase chain reaction.     

Enzymatic signal amplification of molecular beacons for sensitive DNA detection

Molecular beacons represent a new family of fluorescent probes for nucleic acids, and have found broad applications in recent years due to their unique advantages over traditional probes. Detection of nucleic acids using molecular beacons has been based on hybridization between target molecules and molecular beacons in a 1:1 stoichiometric ratio. The stoichiometric hybridization, however, puts an intrinsic limitation on detection sensitivity, because one target molecule converts only one beacon molecule to its fluorescent form. To increase the detection sensitivity, a conventional strategy has been target amplification through polymerase chain reaction. Instead of target amplification, here we introduce a scheme of signal amplification, nicking enzyme signal amplification, to increase the detection sensitivity of molecular beacons. The mechanism of the signal amplification lies in target-dependent cleavage of molecular beacons by a DNA nicking enzyme, through which one target DNA can open many beacon molecules, giving rise to amplification of fluorescent signal. Our results indicate that one target DNA leads to cleavage of hundreds of beacon molecules, increasing detection sensitivity by nearly three orders of magnitude. We designed two versions of signal amplification. The basic version, though simple, requires that nicking enzyme recognition sequence be present in the target DNA. The extended version allows detection of target of any sequence by incorporating rolling circle amplification. Moreover, the extended version provides one additional level of signal amplification, bringing the detection limit down to tens of femtomolar, nearly five orders of magnitude lower than that of conventional hybridization assay.     

The method of single-nucleotide variations detection using capillary electrophoresis and molecular beacons

We demonstrate that single-nucleotide variations in a DNA sequence can be detected using capillary electrophoresis (CE) and molecular beacons (MBs). In this method, the region surrounding the site of a nucleotide variation was amplified in a polymerase chain reaction, then hybridize PCR products with each of MBs. The sequences of the PCR products are different at the site of 2,044 in exon of interleukin (IL)-13 which to be identified. Through denaturation, the PCR product became single strand and hybridized with the completely complementary MB. The MB-target duplexes were separated using CE and solution-based fluorescence techniques. The results show that in each reaction a fluorescent response was elicited from the molecular beacon which was perfectly complementary to the amplified DNA, but not from the other MB whose probe sequence mismatched the target sequence. The method of CE based on MBs is able to identify single-nucleotide variations in a DNA sequence and can discriminate the genotyping of the SNP between the homo- and heteroduplexes of DNA fragments.     

Multiplex detection of single-nucleotide variations using molecular beacons

We demonstrate that single-nucleotide differences in a DNA sequence can be detected in homogeneous assays using molecular beacons. In this method, the region surrounding the site of a sequence variation is amplified in a polymerase chain reaction and the identity of the variant nucleotide is determined by observing which of four differently colored molecular beacons binds to the amplification product. Each of the molecular beacons is perfectly complementary to one variant of the target sequence and each is labeled with a different fluorophore. To demonstrate the specificity of these assays, we prepared four template DNAs that only differed from one another by the identity of the nucleotide at one position. Four amplification reactions were prepared, each containing all four molecular beacons, but each initiated with only one of the four template DNAs. The results show that in each reaction a fluorogenic response was elicited from the molecular beacon that was perfectly complementary to the amplified DNA, but not from the three molecular beacons whose probe sequence mismatched the target sequence. The color of the fluorescence that appeared in each tube during the course of the amplification indicated which nucleotide was present at the site of variation. These results demonstrate the extraordinary specificity of molecular beacons. Furthermore, the results illustrate how the ability to label molecular beacons with differently colored fluorophores enables simple multiplex assays to be carried out for genetic analysis.     

Specific detection of Clostridium botulinum type B by using the polymerase chain reaction.

The polymerase chain reaction (PCR) and a radiolabeled oligonucleotide probe were used to specifically detect proteolytic and nonproteolytic Clostridium botulinum type B. Two synthetic primers deduced from the amino acid sequence data of type B neurotoxin were used to amplify a 1.5-kbp fragment corresponding to the light chain of the toxin. Although, nonspecific priming was observed when the PCR protocol was tested with other clostridial species, only the PCR product from C. botulinum type B isolates reacted with the radiolabeled internal probe. As little as 100 fg of DNA (approximately 35 clostridial cells) could be detected after only 25 amplification cycles.     

Specific detection of Clostridium botulinum type B by using the polymerase chain reaction.

The polymerase chain reaction (PCR) and a radiolabeled oligonucleotide probe were used to specifically detect proteolytic and nonproteolytic Clostridium botulinum type B. Two synthetic primers deduced from the amino acid sequence data of type B neurotoxin were used to amplify a 1.5-kbp fragment corresponding to the light chain of the toxin. Although, nonspecific priming was observed when the PCR protocol was tested with other clostridial species, only the PCR product from C. botulinum type B isolates reacted with the radiolabeled internal probe. As little as 100 fg of DNA (approximately 35 clostridial cells) could be detected after only 25 amplification cycles.     

Novel primers for detection and quantification of Myxococcus species in situ

A nested polymerase chain reaction (PCR) protocol using unique primers was developed to detect and quantify Myxococcus species from environmental samples. The protocol amplified most species of Myxococcus when 10 pg of DNA representing 1000 cells was present, although over half were amplified with as little as 0.1 pg (10 cells). The protocol did not amplify other myxobacterial species, members of the δ‐proteobacteria or other unrelated organisms tested at significantly higher concentrations of DNA. The primers were also used in quantitative PCRs, which accurately estimated the population levels in soil.     

Sensitivity comparison of real-time PCR probe designs on a model DNA plasmid

We investigated three probe design strategies used in quantitative polymerase chain reaction (PCR) for sensitivity in detection of the PCR amplicon. A plasmid with a 120-bp insert served as the DNA template. The probes were TaqMan, conventional molecular beacon (MB), and shared-stem molecular beacon (ATssMB and GCssMB). A shared-stem beacon probe combines the properties of a TaqMan probe and a conventional molecular beacon. It was found that the overall sensitivities for the four PCR probes are in the order of MB>ATssMB>GCssMB>TaqMan. The fluorescence quantum yield measurements indicate that incomplete or partial enzymatic cleavage catalyzed by Taq polymerase is the likely cause of the low sensitivities of two shared-stem beacons when compared with the conventional beacon probe. A high-fluorescence background associated with the current TaqMan probe sequence contributes to the relatively low detection sensitivity and signal-to-background ratio. The study points out that the nucleotide environment surrounding the reporting fluorophore can strongly affect the probe performance in real-time PCR.     

Detection and quantification of degradative genes in soils contaminated by toluene

Abstract: A method based on the polymerase chain reaction (PCR) was developed for a rapid and specific detection of toluene degradative genes in soil. The xylE gene coding for catechol 2,3-dioxygenase was chosen as a target gene. The detection threshold was evaluated in microcosms using a sterilized standard soil inoculated with various amounts of a degradative strain of Pseudomonas putida (mX). The extracted DNA was used as a template to amplify the xylE gene. PCR followed by hybridization with an internal probe allowed us to detect 10² bacteria per g of soil. In polluted soils, quantification of target DNA by competitive PCR was compared with enumeration of degradative microflora. This molecular method appeared to be rapid, sensitive and more suitable than the microbiological approach to estimate the biodegradative potential of a polluted soil.     

Identification and resolution of artifacts in bisulfite sequencing

Bisulfite sequencing has become the most widely used application to detect 5-methylcytosine (5-MeC) in DNA, and provides a reliable way of detecting any methylated cytosine at single-molecule resolution in any sequence context. The process of bisulfite treatment exploits the different sensitivity of cytosine and 5-MeC to deamination by bisulfite under acidic conditions, in which cytosine undergoes conversion to uracil while 5-MeC remains unreactive. In this article, we address the more commonly encountered experimental artifacts associated with bisulfite sequencing, and provide methods for the detection and elimination of these artifacts. In particular, we focus on conditions that inhibit complete bisulfite-mediated conversion of cytosines in a target sequence, and demonstrate the necessity of complete protein removal from DNA samples prior to bisulfite treatment. We also include a brief summary of the experimental protocol for bisulfite treatment and tips for designing polymerase chain reaction (PCR) primers to amplify from bisulfite-treated DNA.     

Use of the polymerase chain reaction and oligonucleotide probes for the rapid detection and identification of Carnobacterium species from meat.

The polymerase chain reaction (PCR) was used selectively to amplify specific rDNA sequences of Carnobacterium divergens, C. mobile, C. piscicola and C. gallinarum in purified DNA extracts, crude cell lysates and food samples. The PCR products were visualized by agarose gel electrophoresis and identified, at species level, by hybridization reactions with three specific oligonucleotide probes for C. divergens, C. mobile and C. piscicola/C. gallinarum designed from 16S rRNA sequence data. The PCR was sufficiently sensitive to amplify DNA from a single bacterium to detectable levels after 30 cycles of amplification. Both radioactive (32P) and non-radioactive alkaline phosphatase labelled probes was able to detect the PCR products. Detection was highly specific and the probes did not hybridize with DNA samples from any other of the bacterial species tested. These methods enabled the rapid and specific detection and identification of carnobacteria from pure cultures and samples of meat.     

Use of the polymerase chain reaction and oligonucleotide probes for the rapid detection and identification of Carnobacterium species from meat

J.L. BROOKS, A.S. MOORE, R.A. PATCHETT, M. D. COLLINS AND R.G. KROLL. 1992. The polymerase chain reaction (PCR) was used selectively to amplify specific rDNA sequences of Carnobacterium divergens, C. mobile, C. piscicola and C. gallinarum in purified DNA extracts, crude cell lysates and food samples. The PCR products were visualized by agarose gel electrophoresis and identified, at species level, by hybridization reactions with three specific oligonucleotide probes for C. divergens, C. mobile and C. piscicola/C. gallinarum designed from 16S rRNA sequence data. The PCR was sufficiently sensitive to amplify DNA from a single bacterium to detectable levels after 30 cycles of amplification. Both radioactive (³²P) and non-radioactive alkaline phosphatase labelled probes was able to detect the PCR products. Detection was highly specific and the probes did not hybridize with DNA samples from any other of the bacterial species tested. These methods enabled the rapid and specific detection and identification of carnobacteria from pure cultures and samples of meat.     

Rapid DNA extraction protocol from soil for polymerase chain reaction-mediated amplification

A simple and rapid method of DNA extraction from soil was developed and DNA was made suitable for subsequent efficient amplification by the polymerase chain reaction (PCR). Key features of the extraction and purification were cold lysozyme- and SDS-assisted lysis with either freezing-thawing or bead beating, cold phenol extraction of the resulting soil suspension, CsCl and KAc precipitation and, finally, spermine-HCl or glass milk purification of DNA. Crude DNA preparations contained 4–20 μg DNA per g of soil extracted, and at least 50% of this was recovered in the final purified DNA preparations. The resulting DNA was pure enough to be restricted by various enzymes, and was amplifiable at concentrations of up to 20 ng of soil-derived DNA per 50 μl reaction mix.
Amplification of a 683 bp target sequence, pat, was performed with different Taq DNA polymerases. Application of the protocol enabled us to detect target DNA derived from roughly 10³ introduced Pseudomonas fluorescens (RP4 :: pat ) cfu per g of soil. The fate of an introduced population in the soil could be followed to this limit with PCR-assisted detection of target DNA. In addition, target DNA was detected in soil 5 months after release, when the introduced organism was no longer detectable on selective agar plates.
The extraction and purification protocol applied to various different soil types resulted in DNA of sufficient purity to permit amplification by PCR.     

Chitosan functionalized magnetic particle-assisted detection of genetically modified soybeans based on polymerase chain reaction and capillary electrophoresis

The high quality of DNA template is one of the key factors to ensure the successful execution of polymerase chain reaction (PCR). Therefore, development of DNA extraction methods is very important. In this work, chitosan modified magnetic particles (MPs) were synthesized and employed for extraction of genomic DNA from genetically modified (GM) soybeans. The extraction protocol used aqueous buffers for DNA binding to and releasing from the surface of the MPs based on the pH inducing the charge switch of amino groups in chitosan modified MPs. The extracted DNA was pure enough (A(260)/A(280)=1.85) to be directly used as templates for PCR amplification. In addition, the PCR products were separated by capillary electrophoresis for screening of GM organisms. The developed DNA extraction method using chitosan modified MPs was capable of preparation of DNA templates, which were PCR inhibitor free and ready for downstream analysis. The whole process for DNA extraction and detection was preferable to conventional methods (phenol-chloroform extraction, PCR, and gel electrophoresis) due to its simplicity and rapidity as well as its avoiding the use of toxic reagents and PCR inhibitors.     

Specific detection of residual CHO host cell DNA by real-time PCR.

Chinese hamster ovary cells have been widely used to manufacture recombinant proteins for human therapeutic use. A sensitive quantitative real-time polymerase chain reaction assay for the detection of residual Chinese hamster (Cricetulus griseus) DNA is presented in this paper. The assay is reasonably affordable and can be adapted for high-throughput screening using 96-well format. Real-time PCR primers were designed to amplify a 150bp region of a genomic fragment from hamster DNA. The specificity of the probe was evaluated in real-time PCR reactions using genomic DNA from mouse fibroblast, human kidney and hamster ovary cell lines as template. Sensitivity of real-time PCR was compared on genomic DNA from hamster cell line CHO DG44. These primers can be used in real-time PCR reactions to detect presence of contaminating hamster DNA in purified protein samples down to sensitivity of 300fg genomic DNA.     

Immobilized stem-loop structured probes as conformational switches for enzymatic detection of microbial 16S rRNA

We have designed and evaluated novel DNA stem-loop structured probes for enzymatic detection of nucleic acid targets. These probes constitute a novel class of conformational switches for enzymatic activity, which in the absence of a target sterically shield an affinity label and upon hybridization of the target to the recognition sequence that forms the loop of the probe restore accessibility of the label for the binding of a reporter enzyme. Analysis of probe characteristics revealed stem stability as the most important parameter governing detection functionality, while other factors such as the length of linker molecules attaching the label to the stem-loop structure and the nature of the solid support proved to be less critical. Apparently, the bulky nature of the reporter enzyme facilitates shielding of the label in the absence of the target, thereby conferring considerable structural tolerance to the conformational switch system. The stem-loop structured probes allow sensitive detection of unlabeled nucleic acid targets. Employing a microtiter assay format, 4 ng of bacterial 16S ribosomal RNA corresponding to 8 fmol could be detected, which can be compared favorably with current immobilized molecular beacon concepts based on fluorescence detection.     

A molecular beacon DNA microarray system for rapid detection of E. coli O157:H7 that eliminates the risk of a false negative signal

A DNA hybridization based optical detection platform for the detection of foodborne pathogens has been developed with virtually zero probability of the false negative signal. This portable, low-cost and real-time assaying detection platform utilizes the color changing molecular beacon as a probe for the optical detection of the target sequence. The computer-controlled detection platform exploits the target hybridization induced change of fluorescence color due to the F?rster (fluorescence) resonance energy transfer (FRET) between a pair of spectrally shifted fluorophores conjugated to the opposite ends of a beacon (oligonucleotide probe). Unlike the traditional fluorophore-quencher beacon design, the presence of two fluorescence molecules allows to actively visualize both hybridized and unhybridized states of the beacon. This eliminates false negative signal detection characteristic for the fluorophore-quencher beacon where bleaching of the fluorophore or washout of a beacon is indistinguishable from the absence of the target DNA sequence. In perspective, the two-color design allows also to quantify the concentration of the target DNA in a sample down to < =1 ng/microl. The new design is suitable for simultaneous reliable detection of hundreds of DNA target sequences in one test run using a series of beacons immobilized on a single substrate in a spatial format.     

Molecular phylogeny of the pinworms of mice, rats and rabbits, and its use to develop molecular beacon assays for the detection of pinworms in mice

Though pinworm infestation has been prevalent since the early years of laboratory animal medicine, the genomes of these parasites have not yet been sequenced. The authors used high-fidelity polymerase chain reaction to amplify a large portion of the ribosomal gene complex of four pinworm species commonly found in lab rodents and rabbits (Aspiculuris tetraptera, Passalurus ambiguus, Syphacia muris and Syphacia obvelata). They determined DNA sequences for these complexes and carried out phylogenetic analysis. Using this information, the authors developed real-time molecular beacon assays for pinworm detection, comparing the new diagnostic approach with traditional methods such as perianal tape testing, fecal flotation and direct examination of intestinal content.     

Polymerase chain reaction for the rapid identification of Clostridium botulinum type A strains and detection in food samples

A polymerase chain reaction (PCR) was developed for the detection of Clostridium botulinum type A, a cause of human botulism. A two primer set and an oligonucleotide detection probe were used to specifically detect Cl. botulinum type A neurotoxin gene (BoNT/A). After 40 cycles of amplification, detection of a 798 bp amplified DNA fragment was carried out by agarose gel electrophoresis and Southern blot hybridization. This assay was able to detect 12.5 fg of purified target DNA or five bacteria per reaction. The sensitivity in artificially contaminated food samples after an 18 h enrichment step ranges from 10 to 10³ bacteria per g according to the type of food samples. No cross-reactions were observed with the other Cl. botulinum toxinotypes and other bacteria found routinely in food. This PCR method may provide a suitable and rapid alternative to standard techniques for detection of Cl. botulinum type A in food samples.     

Detection of Nitrosomonas spp. by polymerase chain reaction

Abstract A unique genomic DNA fragment was isolated from Nitrosomonas europaea ATCC 19718. Based on the sequence of this fragment, oligonucleotide primers for polymerase chain reaction amplification were prepared which amplify sequences of 775 and 658 bp. The predicted DNA fragments were both amplified from the genome of N. europaea and a Nitrosomonas spp. isolated from a local oxidation pond. The primers failed to amplify DNA from the genomes of the ammonia oxidiser Nitrosolobous multiformis , the nitrite oxidiser Nitrococcus mobilis as well as from the genomes of other unrelated heterotrophic bacteria. These DNA sequences could be amplified from 0.01 ng of N. europaea genomic DNA or from 100 intact cells, and it was possible to detect Nitrosomonas DNA in a DNA mixture extracted from water samples drawn from a local oxidation pond.