A simple and rapid method for screening transformant yeast colonies using PCR.

A simple and rapid procedure for screening transformant yeast colonies is described. In this method, a trace amount of plasmid DNA is isolated from a small amount of yeast cell mass; then, the presence of the exogenous DNA in each yeast colony is detected by PCR amplification.     

Cloning yeast telomeres on linear plasmid vectors

We have constructed a linear yeast plasmid by joining fragments from the termini of Tetrahymena ribosomal DNA to a yeast vector. Structural features of the terminus region of the Tetrahymena rDNA plasmid maintained in the yeast linear plasmid include a set of specifically placed single-strand interruptions within the cluster of hexanucleotide (C4A2) repeat units. An artificially constructed hairpin terminus was unable to stabilize a linear plasmid in yeast. The fact that yeast can recognize and use DNA ends from the distantly related organism Tetrahymena suggests that the structural features required for telomere replication and resolution have been highly conserved in evolution. The linear plasmid was used as a vector to clone chromosomal telomeres from yeast. One Tetrahymena end was removed by restriction digestion, and yeast fragments that could function as an end on a linear plasmid were selected. Restriction mapping and hybridization analysis demonstrated that these fragments were yeast telomeres, and suggested that all yeast chromosomes might have a common telomere sequence. Yeast telomeres appear to be similar in structure to the rDNA of Tetrahymena, in which specific nicks or gaps are present within a simple repeated sequence near the terminus of the DNA.     

Copy number control by a yeast centromere

Plasmids containing a cloned yeast (Saccharomyces cerevisiae) centromere (CEN3) in combination with a suitable DNA replication system are maintained in yeast at the low copy number typical of a chromosome. In composite plasmids containing CEN3 plus the yeast 2 mu plasmid, the CEN3 copy number control is dominant over the amplification system that normally drives the 2 mu plasmids to high copy number. The CEN3-2 mu composite plasmids are relatively stably maintained in yeast at a copy number of about one per haploid genome, and segregate through meiosis in a typical Mendelian pattern. Some of the CEN3-2 mu composite plasmids isolated from yeast contain deletions of variable size that remove the functional centromere, resulting in loss of the CEN3 control and reversion to high copy number. Formation of the CEN3 deletions requires the specialized recombination system (inverted repeat sequences and FLP gene) of the yeast 2 mu plasmid.     

Direct simulation of yeast 2-microns circle plasmid amplification.

The 2-microns circle is a plasmid found in most strains of the yeast Saccharomyces cerevisiae at approximately 60-100 copies per cell. The plasmid possesses the novel capacity for replicative amplification induced by site-specific recombination. To address the question of whether the recombination model is adequate to account for observed rates of 2-microns circle amplification, we developed a direct computational simulation of the amplification system. Results of this simulation show that theoretically at least six copies per plasmid can be produced in each generation, and that previously unanticipated replication intermediates contribute largely to this degree of amplification.     

Generation of high-density DNA markers from yeast artificial chromosome DNA by single unique primer-polymerase chain reaction

We have developed a method for the whole sequence amplification of yeast artificial chromosome (YAC) DNA excised from preparative pulsed-field gel electrophoresis using single unique primer-polymerase chain reaction procedures. We used seven contiguous YAC clones, which span 2 Mbp of the Huntington disease gene region on 4p16.3, to amplify the YAC DNAs. The average size of the amplified DNA was ∼300 bp long, and 12 DNA markers located on the YAC clones positively hybridized with these amplified products, implying that the sequences of the YAC clones were comprehensively amplified by our procedures. These amplified YAC DNAs greatly facilitate the characterization of YAC clones, leading to the detailed analysis of the defined chromosomal region.     

High frequency of yeast transformation by plasmids carrying part or entire 2-micron yeast plasmid.

By using two chimeric plasmids containing yeast ura3 gene and 2-micron yeast DNA linked to the bacterial plasmid pCR1, yeast transformation of a high frequency has been achieved. The first plasmid is such that the 2-micron DNA part, in which the ura3 gene is incorporated, can be removed in one step and thus the 2-micron-ura3 sequence can be considered as a "transposable" block. In contrast, the second one bears the entire 2-micron plasmid and the ura3 gene is inserted in the bacterial plasmid part. As shown through hybridization experiments and genetic studies, the ura3 gene was maintained as a cytoplasmic element. Plasmids recovered from the yeast transformants were used to transform Escherichia coli. Their analysis by EcoRI showed that in many cases the vector had recombined with the endogenous 2-micron DNA of the recipient strain. The specific activity of orotidine 5'-monophosphate decarboxylase (coded by ura3) in yeast transformants was 10- to 30-fold higher than in the wild type.     

A method for plasmid purification directly from yeast

A rapid technique for purifying plasmids from yeast Saccharomyces cerevisiae is described that yields high-quality DNA suitable for bacterial transformation, yeast transformation, and direct DNA sequencing. The method requires only small culture volumes and proprietary bacterial plasmid miniprep kits that allow one to simultaneously prepare a large number of samples in a very short period of time while avoiding the use of toxic organic chemicals. Both yeast single-copy CEN/ARS and high-copy 2micro shuttle plasmids can be isolated using this method. This technique is useful for plasmid purification from yeast two-hybrid experiments as well as yeast genetics and molecular biology experiments.     

Use of gap repair in fission yeast to obtain novel alleles of specific genes.

We have adapted a method for making libraries of mutations in any specific gene for use in the fission yeast Schizosaccharomyces pombe . This elegant and simple method consists of PCR amplification of the gene of interest, followed by co-transformation of fission yeast with the PCR fragment and a linearized plasmid vector prepared such that the ends of the vector share DNA sequence with the ends of the PCR fragment. Homologous recombination between the vector and the PCR fragment occurs at a high frequency and results in a collection of yeast transformants, most harboring a mutated allele of the original gene within the vector of choice. This library can then be screened or selected for phenotypes of interest.     

High-throughput liberation of water-soluble yeast content by irreversible electropermeation (HT-irEP)

The article describes a high-throughput method for the liberation of water-soluble cell contents by exploiting the phenomenon of irreversible membrane electropermeation (HT-irEP). The method is exemplified in recombinant proteins and plasmid liberation from yeast Saccharomyces cerevisiae on the detectable level. Obtained extracts are pure enough to be readily applied for further analytical analysis such as enzyme assay, PCR, and so on. From the same HT-irEP extract, one can measure activity of the target protein and perform amplification of the corresponding gene from the DNA vector by PCR for recombinant protein with intracellular expression. Therefore, the method is suitable for the high-throughput screening (HTS) of yeast libraries where extracellular expression of recombinant protein is problematic. The method can be easily automated and integrated into existing HTS systems.     

Effect of storage and processing on plasmid, yeast and plant genomic DNA stability in juice from genetically modified oranges

Recombinant DNA technology is an important tool in the development of plant varieties with new favourable features. There is strong opposition towards this technology due to the potential risk of horizontal gene transfer between genetically modified plant material and food-associated bacteria, especially if genes for antibiotic resistance are involved. Since horizontal transfer efficiency depends on size and length of homologous sequences, we investigated the effect of conditions required for orange juice processing on the stability of DNA from three different origins: plasmid DNA, yeast genomic DNA and endogenous genomic DNA from transgenic sweet orange (C. sinensis L. Osb.). Acidic orange juice matrix had a strong degrading effect on plasmid DNA which becomes apparent in a conformation change from supercoiled structure to nicked, linear structure within 5h of storage at 4 degrees C. Genomic yeast DNA was degraded during exposure to acidic orange juice matrix within 4 days, and also the genomic DNA of C. sinensis suffered degradation within 2 days of storage as indicated by amplification results from transgene markers. Standard pasteurization procedures affected DNA integrity depending on the method and time used. Our data show that the current standard industrial procedures to pasteurize orange juice as well as its acidic nature causes a strong degradation of both yeast and endogenous genomic DNA below sizes reported to be suitable for horizontal gene transfer.     

PCR amplification and analysis of yeast artificial chromosomes

A strategy for the analysis of yeast artificial chromosome (YAC) clones that relies on polymerase chain reaction (PCR) amplification of small restriction fragments from isolated YACs following adapter ligation was developed. Using this method, termed YACadapt, we have amplified several YACs from a human Xq24-qter library and have used the PCR products for physical mapping by somatic cell hybrid deletion analysis and fluorescent in situ hybridization. One YAC, RS46, was mapped to band Xq27.3, near the fragile X mutation. The PCR product is an excellent renewable source of YAC DNA for analyses involving hybridization of YAC inserts to a variety of DNA/RNA sources.     

High frequency excision of Ty elements during transformation of yeast.

Yeast (Saccharomyces cerevisiae) transposons (Ty elements) are excised from up to 20% of supercoiled plasmids during transformation of yeast cells. The excision occurs by homologous recombination across the direct terminal repeats (deltas) of the Ty element, leaving behind a single delta in the transforming plasmid. Only the initial transforming plasmid is susceptible to excision, and no high frequency excision is observed in plasmids that have become established in transformed cells or in plasmids that are resident in cells undergoing transformation. High frequency excision from plasmids during yeast transformation is not specific for Ty elements and can be observed with other segments of plasmid DNA bounded by direct repeats. The frequency of Ty excision from supercoiled plasmids is greatly reduced when the host yeast cells contain the rad52 mutation, a defect in double-strand DNA repair. When linear or ligated-linear plasmid DNAs containing a Ty element are used for transformation, few or no excision plasmids are found among the transformant colonies. These results suggest that when a yeast cell is transformed with a supercoiled plasmid, the plasmid DNA is highly susceptible to homologous recombination for a short period of time.     

A linear shuttle vector for yeast and the hypotrichous ciliate Stylonychia

A linear plasmid was constructed in vitro using the telomeres of the rDNA of Tetrahymena pyriformis. These telomeres were added to a yeast circular vector containing an ARS sequence from Dictyostelium, the LEU2 gene of yeast and the neo gene from Escherichia coli Tn5 fused with a eukaryotic promoter. The resulting plasmid was used to transform yeast. During the replication of the linear plasmid in yeast it was spontaneously modified at the extremity by the addition of 300 bp of yeast telomeric sequence for each end. Total DNA prepared from yeast transformants was used to transform the hypotrichous ciliate Stylonychia lemnae. The same plasmid isolated from Stylonychia can again be replicated in yeast.     

Gene amplification in human cells may involve interchromosomal transposition and persistence of the original DNA region.

In tumor cells in vivo and in vitro the amplification of large DNA sequences is a spontaneous and frequently occurring genetic event. We have used human cells to study independent events leading to a low level of amplification of a single copy of an integrated plasmid. Fluorescence in situ hybridization, chromosome banding, and chromosome painting revealed that the new amplified DNA sequences can become located on chromosomes that are totally unrelated to the chromosome that harbors the original DNA sequences, indicating that the transposition of amplified DNA sequences is interchromosomal. In cells containing amplified DNA sequences the integrated single-copy plasmid remained at its original location. The unit of amplification contained a DNA fragment of at least a 800 kb and the same fragment was also present in the parental single-copy cell clone. The data suggest that a doubling of the DNA region at the original location precedes or is coupled to gene amplification.     

A comparative hybridization analysis of yeast DNA with Paramecium parafusin- and different phosphoglucomutase-specific probes.

Molecular probes designed for the parafusin (PFUS), the Paramecium exocytic-sensitive phosphoglycoprotein, gave distinct hybridization patterns in Saccharomyces cerevisiae genomic DNA when compared with different phosphoglucomutase specific probes. These include two probes identical to segments of yeast phosphoglucomutase (PGM) genes 1 and 2. Neither of the PGM probes revealed the 7.4 and 5.9 kb fragments in Bgl II-cut yeast DNA digest detected with the 1.6 kb cloned PFUS cDNA and oligonucleotide constructed to the PFUS region (insertion 3--I-3) not found in other species. PCR amplification with PFUS-specific primers generated yeast DNA-species of the predicted molecular size which hybridized to the I-3 probe. A search of the yeast genome database produced an unassigned nucleotide sequence that showed 55% identity to parafusin gene and 37% identity to PGM2 (the major isoform of yeast phosphoglucomutase) within the amplified region.     

Plasmid construction by homologous recombination in yeast

We describe a convenient method for constructing new plasmids that relies on interchanging parts of plasmids by homologous recombination in Saccharomyces cerevisiae. A circular recombinant plasmid of a desired structure is regenerated after transformation of yeast with a linearized plasmid and a DNA restriction fragment containing appropriate homology to serve as a substrate for recombinational repair. The free ends of the input DNA molecules need not be homologous in order for efficient recombination between internal homologous regions to occur. The method is particularly useful for incorporating into or removing from plasmids selectable markers, centromere or replication elements, or particular alleles of a gene of interest. Plasmids constructed in yeast can subsequently be recovered in an Escherichia coli host. Using this method, we have constructed an extended series of new yeast centromere, episomal and replicating (YCp, YEp, and YRp) plasmids containing, in various combinations, the selectable yeast markers LEU2, HIS3, LYS2, URA3 and TRP1.     

Recombination-mediated PCR-directed plasmid construction in vivo in yeast.

We have extended the technique of PCR-directed recombination in Saccharomyces cerevisiae to develop a simple method for plasmid or gene construction in the absence of suitable restriction sites. The DNA to be cloned is PCR-amplified with 30-40 bp of homology to a linearized yeast plasmid. Co-transformation into yeast results in homologous recombination at a position directed by the PCR oligonucleotides.     

Transformation of yeast with linearized plasmid DNA. Formation of inverted dimers and recombinant plasmid products

The molecular products of DNA double strand break repair were investigated after transformation of yeast (Saccharomyces cerevisiae) with linearized plasmid DNA. DNA of an autonomous yeast plasmid cleaved to generate free ends lacking homology with the yeast genome, when used in transformation along with sonicated non-homologous carrier DNA, gave rise to transformants with high frequency. Most of these transformants were found to harbor a head-to-head (inverted) dimer of the linearized plasmid. This outcome of transformation contrasts with that observed when the carrier DNA is not present. Transformants occur at a much reduced frequency and harbor either the parent plasmid or a plasmid with deletion at the site of the cleavage. When the linearized plasmid is introduced along with sonicated carrier DNA and a homologous DNA restriction fragment that spans the site of plasmid cleavage, homologous recombination restores the plasmid to its original circular form. Inverted dimer plasmids are not detected. This relationship between homologous recombination and a novel DNA transaction that yields rearrangement could be important to the cell, as the latter could lead to a loss of gene function and lethality.     

Transformation of intact yeast cells treated with alkali cations

Intact yeast cells treated with alkali cations took up plasmid DNA. Li+, Cs+, Rb+, K+, and Na+ were effective in inducing competence. Conditions for the transformation of Saccharomyces cerevisiae D13-1A with plasmid YRp7 were studied in detail with CsCl. The optimum incubation time was 1 h, and the optimum cell concentration was 5 x 10(7) cells per ml. The optimum concentration of Cs+ was 1.0 M. Transformation efficiency increased with increasing concentrations of plasmid DNA. Polyethylene glycol was absolutely required. Heat pulse and various polyamines or basic proteins stimulated the uptake of plasmid DNA. Besides circular DNA, linear plasmid DNA was also taken up by Cs+-treated yeast cells, although the uptake efficiency was considerably reduced. The transformation efficiency with Cs+ or Li+ was comparable with that of conventional protoplast methods for a plasmid containing ars1, although not for plasmids containing a 2 microns origin replication.