2-D Crystallization of theRhodococcus20S Proteasome

The 2D crystallization method using a liquid–liquid interface has been applied to theRhodococcus20S proteasome. Two types of ordered arrays were obtained, both large enough for high-resolution analysis. The first one is a hexagonal close-packed array, whereas the second one has fourfold symmetry. By image analysis based on a real space correlation averaging technique, the close-packed array was found to be hexagonally packed but the molecules had complete rotational freedom. The fourfold array is, however, a true crystal with p4 symmetry. Lattice constants area=b= 20.0 nm and the unit cell of this crystal contains two proteasomes. The diffraction pattern computed from the original picture shows the spots up to (4.5) that correspond to 3.1 nm resolution. After applying an unbending procedure, the diffraction pattern shows spots extending to 1.8 nm resolution.     

Electron microscopic studies of carboxysomes of Thiobacillus neapolitanus

The outer part of the carboxysomes of Thiobacillus neapolitanus was examined by electron microscopy using negatively stained, cryo-treated, frozen hydrated and freeze dried specimens. From stereo-micrographs of freeze dried and fixated carboxysomes the three dimensional structure of the carboxysomes was elucidated. The carboxysomes always appear as hexagonal bodies, which possess twelve pentameric planes. This indicates that carboxysomes have the form of a pentagonal dodecahedron. Inside the carboxysomes the ribulose-1,5-bisphosphate carboxylase molecules are arranged in rows and concentric rings. Negatively stained and cryo-treated carboxysomes do not differ significantly in size. The mean size of these carboxysomes is 117.3±6.9 nm (n=782)     

Three-dimensional reconstruction of the hexagonal bilayer hemoglobin of the hydrothermal vent tube worm Riftia pachyptila by cryoelectron microscopy

A frozen-hydrated specimen of the V1 hemoglobin of the hydrothermal vent tube worm Riftia pachyptila was observed in the electron microscope and subjected to three-dimensional reconstruction by the method of random conical tilt series. The 3D volume possesses a D₆ point-group symmetry. When viewed along its 6-fold axis the vertices of its upper hexagonal layer are 16° clockwise rotated compared to those of the lower layer. A central linker complex is decorated by 12 hollow globular substructures. The linker complex comprises (i) a central hexagonal toroid, (ii) two internal bracelets onto which the hollow globular substructures are built, and (iii) six structures connecting the two hexagonal layers. The hollow globular substructures, related to the dodecamers of globin chains resulting from the dissociation of the hexagonal bilayer hemoglobin, have a local pseudo 3-fold symmetry and are composed each of three elongated structures visible when the volume is displayed at high threshold. At a resolution of 36 Å, the 3D volumes of the hexagonal bilayer hemoglobins of Riftia pachyptyla and of the leech Macrobdella decora look almost perfectly identical. © 1996 Wiley-Liss, Inc.     

Disordered Single Crystal Evidence for a Quadruple Helix Formed by Guanosine 5′-Monophosphate

Abstract

The disodium salt of guanosine 5′-monophosphate (5′-GMP) has been crystallized earlier in an orthorhombic array. We have obtained a new crystal form of 5′-GMP at pH 8 which reveals a clear helical nature, with guanine bases stacked perpendicular to the helix axis. Although the X-ray pictures show partial disorder, they can be indexed on a hexagonal net with a = b = 28.6 Å,c = 9.8 Å, V= 6942ų(1Å = 0.1 nm). The probable space group is P6₄, and past experience with ca. 600 ų per base in oligonucleotide crystals suggests that the cell contains 12 GMP molecules. The crystal packing parameters and the intensity distribution agree with a model of three hydrogen-bonded guanine tetrads in the unit cell, stacked so as to build a quadruple helix similar to that proposed earlier from fiber studies (Zimmerman, S.B., J. Mol. Biol. 106, 663–672 (1976)).     

Crystallization and prelilminary X-ray investigation of barster,the intracellular inhibitor of barnase

Crystals of barstar, the intracellular inhibitor of the extracellular ribonuclease produced by Bacillus amyloliquefaciens (barnase), were obtained through vapor phase equilibration using the hanging drop technique. Three crystal forms have been characterized. Forms I and II, crystallized eithr in potetragonal; they exhibit a superstructure along the c-axis. Form III crystals, suitable for a high resolution structure determination, were grown from 55-65% ammomnium sulfate. This crystal form is hexagonal and diffracts to at least 2 Å resolution at a synchrotron radiation source. It belongs to the hexagonal space group P6, with unit cell dimensions a = b = 143.6 Å, c = 35.6 Å. There are four molecules of barstar in the asymmetric unit. X-ray data have been collected to 2.2 Å Bragg sapcing. The structure determination is underway in order to analyze conformational changes of barstar upon complexation with barnas. © 1993 Wiley-Liss, Inc.     

Two Novel Bacteriophages of Thermophilic Bacteria Isolated from Deep-Sea Hydrothermal Fields

Bacteriophages of thermophiles are of great interest due to their important roles in many biogeochemical and ecological processes. However, no virion has been isolated from deep-sea thermophilic bacteria to date. In this investigation, two lytic bacteriophages (termed Bacillus virus W1 and Geobacillus virus E1) of thermophilic bacteria were purified from deep-sea hydrothermal fields in the Pacific for the first time. Bacillus virus W1 (BVW1) obtained from Bacillus sp. w13, had a long tail (300nm in length and 15 nm in width) and a hexagonal head (70 nm in diameter). Another virus, Geobacillus virus E1 (GVE1) from Geobacillus sp. E26323, was a typical Siphoviridae phage with a hexagonal head (130 nm in diameter) and a tail (180 nm in length and 30 nm in width). The two phages contained double-stranded genomic DNAs. The genomic DNA sizes of BVW1 and GVE1 were estimated to be about 18 and 41 kb, respectively. Based on SDS-PAGE of purified virions, six major proteins were revealed for each of the two phages. The findings in our study will be very helpful to realize the effect of virus on thermophiles as well as the communities in deep-sea hydrothermal fields.     

Two-dimensional crystal packing of matrix porin. A channel forming protein in Escherichia coli outer membranes

Two-dimensional crystalline porin sheets were obtained by reconstitution of monodisperse protein trimers and phospholipids (dimyristoylphosphatidylcholine) by detergent dialysis, analogous to the reconstitution method used for functional tests (Schindler & Rosenbusch, 1981). Three different packing arrangements were observed: two were hexagonal (with p3 symmetry and lattice constants of 9.3 nm and 7.9 nm), and one rectangular (a = 7.9 nm, b = 13.9 nm). The different crystals could be correlated to phospholipid-to-protein weight ratios of 0.16 to 0.72. At the higher ratio, large hexagonal lattices predominated. Higher lipid ratios did not reveal other crystal forms. The packing arrangement of the large hexagonal form appears very similar to the hexagonal habit of three-dimensional crystal forms (Garavito et al., 1983). The shape of the stain-penetrated triplet indentations appeared conserved in the crystal forms to a resolution of 2.2 nm. The mass distribution between triplets, however, were significantly different. They are likely to correspond primarily to lipids. Mass determinations of unstained porin by scanning transmission electron microscopy showed that unit cells consisted of single trimers. The mass found (100,000 daltons) is in good agreement with the value obtained by sedimentation equilibrium analysis.     

Polymorphism of Crystals of Salmonella minnesota Re and Ra Lipopolysaccharides

Salmonella minnesota Re and Ra lipopolysaccharides (LPSs) formed three-dimensional crystals when they were precipitated by the addition of 2 volumes of 95% ethanol containing 375 mM MgCl₂ and incubated in 70% ethanol containing 250 mM MgCl₂ at 4 C. Besides typical shapes of crystals, hexagonal plates and solid columns, which were already reported (J. Bacteriol. 172: 1516–1528 (1990)), the LPSs thus treated formed crystals possessing various shapes such as square or rectangular plate, lozenge plate, discoid, and truncated hexangular pyramid forms. Electron diffraction patterns from all these crystals except square or rectangular plate crystals obtained by electron irradiation from the direction perpendicular to the basal plane were essentially the same as those from hexagonal plate crystals, indicating that they consist of hexagonal lattices with the lattice constant of 4.62 Å. From these results as well as the results of electron microscopic observations of these crystals, it was concluded that all these crystals except square or rectangular plate crystals are composed of hexagonal plate sheets as the basic structural units. Square or rectangular crystals were assumed to correspond to the {1011} planes of solid hexagonal column crystals.     

A revisit to the three-dimensional structure of B-type starch

A new three-dimensional structure of B-starch is proposed in which the unit cell contains 12 glucose residues located in two left-handed, parallel-stranded double helices packed in a parallel register; 36 water molecules are located between these helices. Chains are crystallized in the hexagonal space group P6₁, with lattice parameters a = b = 1.85 nm, c = 1.04 nm. The space group symmetry was derived from an exhaustive analysis of the large body of structural studies published so far. Diffraction data used in this work were taken from the previously reported x-ray fiber diffractogram [H.C. Wu and A. Sarko (1978), Carbohydrate Research, 61 , 7–25] after adequate reindexing. The final R factor is 0.145 for the three-dimensional data. The repeating unit consists of a maltose molecule where the glucose residues have the ⁴C₁ pyranose conformation and are α(1 → 4) linked. The conformation of the glycosidic linkage is characterized by torsion angles (Φ, Ψ) that take the values (83.8°, ?144.6°) and (84.3°, ?144.1°), whereas the valence angles at the glycosidic bridge have a magnitude of 115.8° and 116.5°, respectively. The primary hydroxyl groups exist in a gauche–gauche conformation. There is no intramolecular hydrogen bond. Within the double helix, interstrand stabilization is achieved without any steric conflict and through the occurrence of O(2)…O(6) type of hydrogen bonds. The model presented here, with an hydration around 27% w/w, corresponds to a well-ordered crystalline sample, since all the water molecules could be located with no apparent sign of a disorder. Half of the water molecules are tightly bound to the double helices; the remainder forms a complex network centered around the sixfold screw axis of the unit cell. The consistency of the present structural model, with both physicochemical and biochemical aspects of the crystalline component of tuber starch granules, is analyzed.     

Crystalline sheets of tropomyosin

In the presence of spermine tropomyosin forms sheets having two-dimensional crystallinity and tactoids. The most common form of sheet has cmm symmetry with a = 80 nm and b = 5 nm. The structure of this sheet has been solved in projection to a nominal resolution of 1.5 nm by combining data from electron diffraction and electron microscopy. Analysis of this pattern and that of rarely observed sheets having p2 symmetry (a = 40 nm, b = 5 nm and γ = 80 °) indicated that the cmm structure was formed by superposition of two p2 sheets. The tropomyosin molecules in each p2 sheet were arranged in rows directed along the p2 (0, 1) lattice lines, with all the molecules in one row having the same polarity and lying antiparallel to the molecules in adjacent rows. These rows associated in pairs, possibly by the supercoiling of the molecules in one row about those in the neighbouring row.     

In vitro assembly of gap junctions

Gap junction structures were assembled in vitro from octyl-β- -glucopyranoside-solubilized components of lens fiber cell membranes. Individual pore structures (connexons), short double-membrane structures, and other amorphous material were evident in the solubilized mixture. Following the removal of the detergent by dialysis, these connexons associated to form single- and double-layered, two-dimensional hexagonal arrays (unit cell size a = B = 8.5 nm). The formation of larger arrays was dependent on the lipid-to-protein ratio and the presence of Mg²⁺ ions. Crystallographic analysis of electron micrographs revealed that lens junctional connexons consisted of six subunits surrounding a stain-filled channel. Upon further detergent treatment, in vitro assembled gap junctions were insoluble and formed three-dimensional stacks while other components were solubilized. SDS-PAGE and mass data from scanning transmission electron microscopy strongly suggest that a 38-kDa polypeptide, which is a processed form of the lens specific gap junction protein MP70, is a major component of the arrays. The in vitro assembly of gap junctions opens new avenues for the structural analysis of gap junctions and for the study of the intermolecular interactions of connexons during junctional assembly.     

Refined structure of basic phospholipase A2 from venom of Agkistrodon halys Pallas in orthorhombic crystal form I at 0.25 nm resolution

The basic phospholipase A2 from the venom of Agkistrodon halys Pallas is a potent hemolytic toxin and anticoagulant. The accurate rotation and translation parameters of the molecules in orthorhombic crystal form I were successfully obtained using the fitting refinement technique. The structure was refined in the resolution range of 0. 6-0.25 nm using least square refinement with non-crystallographic two fold symmetry restraint, and resulted in the final R factor of 20.1 % , and the rms deviations from ideal stereochemistry were 0. 001 3 nm for bond lengths and 1. 32° for bond angles. The overall architecture of the present structure was similar to that of the determined structure of the orthorhombic crystal form Ⅱ, with a few differences in the regions of the β-wing and Ca²⁺-binding loop. The dimers formed by the two molecules in the asymmetric unit in both crystal forms were also similar. However, one of the monomers showed an orientational difference of 5.5° along the dimer interface in the two crystal forms, suggesting the flexibility of the interface of the dimer to some degree. The molecular packing of the dimer in crystal form I was much more compact than that in crystal form Ⅱ.     

Molecular dimensions of the SS and FF phenotypes of human placental alkaline phosphatase: Rotary shadowing and negative staining electron microscope measurements

The two most common homologous phenotypes (SS and FF) of human placental alkaline phosphatase were purified and observed in the electron microscope by rotary shadowing and negative staining techniques. In the rotary shadowing technique, the molecules of the two phenotypes appeared to be approximately elliptical with slit-like structures in the center of the molecules, suggestive of the groove between two subunits. The dimensions of the rotary-shadowed molecules were calculated as 10.1 nm × 5.7 nm for SS and 10.1 nm × 5.6 nm for FF phenotypes. The negative staining technique delivered more fine detail of the molecules than rotary shadowing. The predominant shape of the molecules in this method appeared to be rectangular, with a longitudinal stain-filled groove and with each of the half molecules (presumably 65,000 M_r subunit) very often appearing bi-lobed. This accounts for the molecules which appear to have four pronounced electron-transparent regions. The dimensions of the negatively stained rectangular-shaped molecules were measured as 7.5 nm × 5.5 nm for SS and 7.0 nm × 5.4 nm for FF phenotypes. No significant difference in electron microscopic appearance between the SS and FF phenotypes were observed.     

Lumbricus terrestris hemoglobin: A comparison of small-angle X-ray scattering and cryoelectron microscopy data

The quaternary structure of Lumbricus terrestris hemoglobin was investigated by small-angle x-ray scattering (SAXS). Based on the SAXS data from several independent experiments, a three-dimensional (3D) consensus model was established to simulate the solution structure of this complex protein at low resolution (about 3 nm) and to yield the particle dimensions. The model is built up from a large number of small spheres of different weights, a result of the two-step procedure used to calculate the SAXS model. It accounts for the arrangement of 12 subunits in a hexagonal bilayer structure and for an additional central unit of cylinder-like shape. This model provides an excellent fit of the experimental scattering curve of the protein up to h = 1 nm⁻¹ and a nearly perfect fit of the experimental distance distribution function p(r) in the whole range. Scattering curves and p(r) functions were also calculated for low-resolution models based on 3D reconstructions obtained by cryoelectron microscopy (EM). The calculated functions of these models also provide a very good fit of the experimental scattering curve (even at h > 1 nm⁻¹) and p(r) function, if hydration is taken into account and the original model coordinates are slightly rescaled. The comparison of models reveals that both the SAXS-based and the EM-based model lead to a similar simulation of the protein structure and to similar particle dimensions. The essential differences between the models concern the hexagonal bilayer arrangement (eclipsed in the SAXS model, one layer slightly rotated in the EM model), and the mass distribution, mainly on the surface and in the central part of the protein complex. © John Wiley & Sons, Inc. Biopoly 45: 289–298, 1998     

X-ray diffraction studies on the structure of hydrated collagen

The temperature dependence of the humidity-sensitive spacing, d, related to the lateral packing of collagen molecules was measured for fully hydrated collagen. In the vicinity of 0°C, a sudden change in d was observed, which was reversible with temperature. In the diffraction profile, below 0°C, a set of diffraction peaks identified with the hexagonal crystalline form of ice was observed. With the reduction in water content, the intensity of the set of diffraction peaks decreased and was found to be zero at a water content of 0.38 g/g collagen. These results were considered to be caused by the frozen water in collagen fibril below 0°C. According to the water content dependence of d, it was considered that up to a certain water content water absorbed would be stowed in the intermolecular space of collagen and above that water content water molecules would aggregate to make pools, i. e., extrafibrillar spaces. The unfreezable bound water was considered to be located in the intermolecular space of collagen. Size of the extrafibrillar space, determined from the intensity analysis of a smallangle x-ray scattering pattern, corroborates the speculation that the water showed in the extrafibrillar space is freezable and free. The formation of the hexagonal crystalline form of ice in the extrafibrillar space was considered to cause the sudden change in d at 0°C.     

Three-dimensional reconstruction of maltoporin from electron microscopy and image processing.

Two dimensional crystals of maltoporin (or phage lambda receptor) were obtained by reconstitution of purified maltoporin trimers and Escherichia coli phospholipids by detergent dialysis. Two different trimer packing forms were observed. One was hexagonal (a = 7.8 nm) and one rectangular (a = 7.8 nm, b = 13.6 nm). In this paper we describe the three-dimensional structure of maltoporin, deduced from the study of the rectangular form by electron microscopy and image processing. At a resolution of approximately 2.5 nm, maltoporin trimers form aqueous channel triplets which appear to merge into a single outlet at the periplasmic surface of the outer membrane. The pore defined by maltoporin has a similar structure to that outlined by the matrix protein. From the results of functional studies by conductance measurement, it is concluded that the three channels defined by maltoporin act, contrary to those formed by the porin (OmpF protein), as a single conducting unit. A tentative outline of the maltoporin promoter is given. Maltoporin appears to be constituted by three different domains: a major rod-like domain spanning the membrane, a minor domain located near the periplasmic surface of the membrane and finally a central domain responsible for the splitting of the channel.     

Toxicological Aspects of the Essential Oil from Cinnamodendron dinisii

The objective of this study was to determine cytotoxic activity, hemolytic activity, and to evaluate the ability of the essential oil from Cinnamodendron dinisii to induce DNA fragmentation of human lymphocytes. The essential oil was obtained by hydrodistillation. Cytotoxic activity was determined by the MTT method. Hemolytic activity was evaluated by spectrophotometric quantification of hemoglobin released by erythrocytes. Damage to lymphocyte DNA molecules was assessed by the Comet assay. The essential oil under study showed high cytotoxic activity on Vero cells (CC₅₀ = 35.72 μg/mL) and induced hemolysis in both hematocrits, besides leading to the oxidation of hemoglobin released. The genotoxic activity of C. dinisii essential oil was also observed, which induced concentration‐dependent DNA fragmentation of human lymphocytes and, at 50 μL/mL, it was more active than the positive control. The essential oil from C. dinisii has a toxic action, suggesting a special attention in the application of this oil to health‐promoting activities; however, among its components, there are molecules with potential for future application in anticancer therapies.     

The molecular architecture of extracellular hemoglobin of Eophila tellinii

The molecular shape of the extracellular hemoglobin of the annelid worm Eophila tellinii was investigated by electron microscopy of negatively stained single molecules and of two-dimensional crystalline arrays. While the single molecules show the characteristic double hexagons, approx 28 nm in diameter and 19 nm in height, the molecules in the crystals are only 7–8 nm in height according to the 3D reconstruction. This is attributed to a dissociation of the hemoglobin complex; we present evidence that dissociation may proceed to the level of the main subunit from which half-molecules are reassembled. 3D reconstructions of two different crystal forms yield almost identical results and provide some information about the mass distribution within the main subunit. The presence or absence of the “central subunit” is tentatively interpreted in terms of a gross conformational change which entails a redistribution of mass also in the main subunit.     

Crystallization and preliminary crystallographic studies of the precursor and mature forms of a neutral lipase from the fungus Rhizopus delemar

A neutral lipase from the filamentous fungus Rhizopus delemar has been crystallized in both its proenzyme and mature forms. Although the latter crystallizes readily and produces a variety of crystal forms, only one was found to be suitable for X-ray studies. It is monoclinic (C2, a = 92.8 Å, b = 128.9 Å, c = 78.3 Å, β = 135.8) with two molecules in the asymmetric unit related by a noncrystallographic diad. The prolipase crystals are orthorhombic (P2₁2₁2₁, with a = 79.8 Å, b = 115.2 Å, c = 73.0 Å) and also contain a pair of molecules in the asymmetric unit. Initial results of molecular replacement calculations using the refined coordinates of the related lipase from Rhizomucor miehei identified the correct orientations and positions of the protein molecules in the unit cells of crystals of both proenzyme and the mature form. © 1994 John Wiley & Sons, Inc.     

Fiber-Structured Material in a Fraction of Bacillus subtilis

The paracrystal fractions of two species of Bacillus contain similarly structured fibrous material whose unit cell is hexagonal, with cell dimensions of a = 0.719 nm and c = 0.963 nm.