Single-strand conformational polymorphism markers associated with a major QTL for fusarium head blight resistance in wheat

A major quantitative trait locus (QTL) associated with resistance to Fusarium head blight (FHB) was identified on chromosome 3BS between simple sequence repeat (SSR) markers Xgwm389 and Xgwm493 in wheat “Ning 7840”, a derivative from “Sumai 3”. However, the marker density of SSR in the QTL region was much lower than that required for marker-assisted selection (MAS) and map-based cloning. The objective of this study was to exploit new markers to increase marker density in this QTL region by using single-strand conformational polymorphism (SSCP) markers developed from wheat-expressed sequence tags (ESTs) on 3BS bin 8-0.78-1.0. Sixty-nine out of 85 SSCP primer pairs amplified PCR (polymerase chain reaction) products from the genomic DNA of “Chinese Spring”. Thirty-four primer pairs amplified PCR products that could form clear ssDNA (single strand DNA) bands through denaturation treatment. Ten SSCP markers had polymorphisms between Ning 7840 and “Clark”. Five of the ten polymorphic SSCP markers were located on chromosome 3B by nullitetrasomic analysis. Three SSCP markers (Xsscp6, Xsscp20, and Xsscp21) were mapped into the region between Xgwm493 and Xgwm533 and possessed a higher coefficient of determination (R²) than Xgwm493 and Xgwm533. The SSCP markers, Xsscp6, Xsscp20, and Xsscp21, can be used for map-based cloning of the QTL and for marker-assisted selection in FHB resistance breeding.     

Identification of the di-<Emphasis Type="Italic">n</Emphasis>-butyl phthalate-biodegrading strains and the biodegradation pathway in strain LMB-1

DNA isolated from a greenhouse soil (Nanjing, Jiangsu Province, China) was suitable for PCR amplification of gene segment coding for the 16S rRNA. Diverse PCR products were characterized by cloning and sequencing, and analysis of bacterial colonies showed the presence over 26 phyla. The most bacteria belonged to Proteobacteria, Actinobacteria, Gemmatimonadetes, Acidobacteria and Planctomycetes. Furthermore, after the enrichment procedure of DBP-degrading microorganisms, 4 strains were isolated from the soil sample with di-n-butyl phthalate (DBP) biodegradability, and they were identified to be Rhizobium sp., Streptomyces sp., Pseudomonas sp. and Acinetobacter sp. Analysis of the degradation products by LC-MS led to identification of metabolites of DBP in strain LMB-1 (identified as Rhizobium sp.) which suggests that DBP was degraded through β-oxidation, demethylation, de-esterification and cleavage of aromatic ring.     

High-resolution mapping of genes involved in plant stage-specific partial resistance of barley to leaf rust

Partial resistance quantitative trait loci (QTLs) Rphq11 and rphq16 against Puccinia hordei isolate 1.2.1 were previously mapped in seedlings of the mapping populations Steptoe/Morex and Oregon Wolfe Barleys, respectively. In this study, QTL mapping was performed at adult plant stage for the two mapping populations challenged with the same rust isolate. The results suggest that Rphq11 and rphq16 are effective only at seedling stage, and not at adult plant stage. The cloning of several genes responsible for partial resistance of barley to P. hordei will allow elucidation of the molecular basis of this type of plant defence. A map-based cloning approach requires to fine-map the QTL in a narrow genetic window. In this study, Rphq11 and rphq16 were fine-mapped using an approach aiming at speeding up the development of plant material and simplifying its evaluation. The plant materials for fine-mapping were identified from early plant materials developed to produce QTL-NILs. The material was first selected to carry the targeted QTL in heterozygous condition and susceptibility alleles at other resistance QTLs in homozygous condition. This strategy took four to five generations to obtain fixed QTL recombinants (i.e., homozygous resistant at the Rphq11 or rphq16 QTL alleles, homozygous susceptible at the non-targeted QTL alleles). In less than 2 years, Rphq11 was fine-mapped into a 0.2-cM genetic interval and a 1.4-cM genetic interval for rphq16. The strongest candidate gene for Rphq11 is a phospholipid hydroperoxide glutathione peroxidase. Thus far, no candidate gene was identified for rphq16.     

Novel recombinant binary vectors harbouring Basta (bar) gene as a plant selectable marker for genetic transformation of plants

Genetic transformation is one of the most widely used technique in crop improvement. However, most of the binary vectors used in this technique, especially cloning based, contain antibiotic genes as selection marker that raise serious consumer and environmental concerns; moreover, they could be transferred to non-target hosts with deleterious effects. Therefore, the goal of this study was reconstruction of the widely used pBI121 binary vector by substituting the harmful antibiotic selection marker gene with a less-harmful selection marker, Basta (herbicide resistance gene). The generated vectors were designated as pBI121NB and pBI121CB, in which Basta gene was expressed under the control of Nos or CaMV 35S promoter, respectively. The successful integration of the new inserts into both the vectors was confirmed by PCR, restriction digestion and sequencing. Both these vectors were used in transforming Arabidopsis, Egyptian wheat and barley varieties using LBA4404 and GV3101 Agrobacterium strains. The surfactant Tween-20 resulted in an efficient transformation and the number of Arabidopsis transformants was about 6–9 %. Soaked seeds of wheat and barley were transformed with Agrobacterium to introduce the bacteria to the growing shoot apices. The percentage of transgenic lines was around 16–17 and 14–15 % for wheat and barley, respectively. The quantitative studies presented in this work showed that both LBA4404 and GV3101 strains were suitable for transforming Egyptian wheat and barley.     

Development and validation of KASP markers for the greenbug resistance gene <Emphasis Type="Italic">Gb7</Emphasis> and the Hessian fly resistance gene <Emphasis Type="Italic">H32</Emphasis> in wheat

Key message

Greenbug and Hessian fly are important pests that decrease wheat production worldwide. We developed and validated breeder-friendly KASP markers for marker-assisted breeding to increase selection efficiency.

Abstract

Greenbug (Schizaphis graminum Rondani) and Hessian fly [Mayetiola destructor (Say)] are two major destructive insect pests of wheat (Triticum aestivum L.) throughout wheat production regions in the USA and worldwide. Greenbug and Hessian fly infestation can significantly reduce grain yield and quality. Breeding for resistance to these two pests using marker-assisted selection (MAS) is the most economical strategy to minimize losses. In this study, doubled haploid lines from the Synthetic W7984 × Opata M85 wheat reference population were used to construct linkage maps for the greenbug resistance gene Gb7 and the Hessian fly resistance gene H32 with genotyping-by-sequencing (GBS) and 90K array-based single nucleotide polymorphism (SNP) marker data. Flanking markers were closely linked to Gb7 and H32 and were located on chromosome 7DL and 3DL, respectively. Gb7-linked markers (synopGBS773 and synopGBS1141) and H32-linked markers (synopGBS901 and IWB65911) were converted into Kompetitive Allele Specific PCR (KASP) assays for MAS in wheat breeding. In addition, comparative mapping identified syntenic regions in Brachypodium distachyon, rice (Oryza sativa), and sorghum (Sorghum bicolor) for Gb7 and H32 that can be used for fine mapping and map-based cloning of the genes. The KASP markers developed in this study are the first set of SNPs tightly linked to Gb7 and H32 and will be very useful for MAS in wheat breeding programs and future genetic studies of greenbug and Hessian fly resistance.

     

An ATP-Binding Cassette Transporter Gene from <Emphasis Type="Italic">Cucumis sativus</Emphasis> L., <Emphasis Type="Italic">CsABC19</Emphasis>, Is Involved in Propamocarb Stress in <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>

A propamocarb-responsive gene named CsABC19 was isolated from a cucumber cultivar ‘D0351’ using a homologous cloning strategy. The full-length cDNA of CsABC19 was 921 bp with a complete ORF encoding 306 amino acids. Quantitative real-time PCR analysis revealed that CsABC19 was induced in the root, stem, leaf, and fruit by propamocarb and the expression levels of CsABC19 seemed to be different in different tissues. Further functional analysis showed that CsABC19 transgenic Arabidopsis plants appeared better growth performance under propamocarb stress and lower propamocarb residues. Our findings suggest that CsABC19 plays a crucial role in plant responses to propamocarb stress and also provide new clues for the mechanism regulation of the responses to propamocarb stress in cucumber.     

Construction of a thermo-sensitive pRI857 vector for efficient DNA capturing in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objectives

To establish a positive cloning system with a zero background for high-throughput DNA cloning purpose.

Results

The cloning vector, pRI857, and the genomic-library construction vector, pRI857-BAC, were constructed based on the mechanism of expression of the thermo-sensitive cI857 repressor gene that can stringently repress the P_R promoter and kanamycin resistance gene (P_R-kan ^R ) at 30 °C, but have no effect on P_R-kan ^R gene at 37 °C or at higher temperatures. When the pRI857 vectors were transformed into E. coli with or without a target foreign DNA fragment inserted at the BfrBI site of the cI857 gene, only colonies with the foreign DNA fragment survive. We extended this method to construct a pRI857-BAC vector for genomic library cloning which displays an efficiency of ~10⁷ cfu per µg of genomic DNA, with no empty vectors detected.

Conclusions

Cloning by indirect activation of resistance marker gene represents a novel DNA-capturing system, which can be widely applied for high-throughput DNA cloning.

     

Identification and Mutational Analysis of <Emphasis Type="Italic">Escherichia coli</Emphasis> Sorbitol-Enhanced Glucose-Repressed <Emphasis Type="Italic">srlA</Emphasis> Promoter Expressed in LB Medium by Using Homologous Recombination and One-Round PCR Products

Escherichia coli has been used for recombinant protein production for many years. However, no native E. coli promoters have been found for constitutive expression in LB medium. To obtain high-expression E. coli promoters active in LB medium, we inserted various promoter regions upstream of eEmRFP that encodes a red fluorescent protein. Among the selected promoters, only colonies of srlA promoter transformants turned red on LB plate. srlA is a gene that regulates sorbitol utilization. The addition of sorbitol enhanced eEmRFP expression but glucose and other sugars repressed, indicating that srlAp is a sorbitol-enhanced glucose-repressed promoter. To analyze the srlAp sequence, a novel site-directed mutagenesis method was developed. Since we demonstrated that homologous recombination in E. coli could occur between 12-bp sequences, 12-bp overlapping sequences were attached to the set of primers that were designed to produce a full-length plasmid, denoted “one-round PCR product.” Using this method, we identified that the srlA promoter region was 100 bp. Further, the sequence adjacent to the start codon was found to be essential for high expression, suggesting that the traditionally used restriction enzyme sites for cloning in the promoter region have hindered expression. The srlA-driven expression system and DNA manipulation with one-round PCR products are useful tools in E. coli genetic engineering.     

Direct cloning and transplanting of large DNA fragments from Escherichia coli chromosome

We applied a resistance split-fusion strategy to increase the in vivo direct cloning efficiency mediated by Red recombination. The cat cassette was divided into two parts: cma (which has a homologous sequence with cmb) and cmb, each of which has no resistance separately unless the two parts are fused together. The cmb sequence was integrated into one flank of a target cloning region in the chromosome, and a linear vector containing the cma sequence was electroporated into the cells to directly capture the target region. Based on this strategy, we successfully cloned an approximately 48 kb DNA fragment from the E. coli DH1-Z chromosome with a positive frequency of approximately 80%. Combined with double-strand breakage-stimulated homologous recombination, we applied this strategy to successfully replace the corresponding region of the E. coli DH36 chromosome and knock out four non-essential genomic regions in one step. This strategy could provide a powerful tool for the heterologous expression of microbial natural product biosynthetic pathways for genome assembly and for the functional study of DNA sequences dozens of kilobases in length.     

Fine mapping and candidate gene screening of the downy mildew resistance gene <Emphasis Type="Italic">RPF1</Emphasis> in Spinach

Key message

A SLAF-BSA approach was used to locate the RPF1 locus. The three most likely candidate genes were identified which provide a basic for cloning the resistance gene at the RPF1 locus.

Abstract

Spinach downy mildew is a globally devastating oomycete disease. The use of downy mildew resistance genes constitutes the most effective approach for disease management. Hence, the objective of the present study was to fine map the first-reported resistance locus RPF1. The resistance allele at this resistance locus was effective against races 1–7, 9, 11, 13, and 15 of Peronospora farinosa f. sp. spinaciae (P. effusa). The approach fine mapped RPF1 using specific-locus amplified fragment sequencing (SLAF-Seq) technology combined with bulked segregant analysis. A 1.72 Mb region localized on chromosome 3 was found to contain RPF1 based on association analysis. After screening recombinants with the SLAF markers within the region, the region was narrowed down to 0.89 Mb. Within this region, 14 R genes were identified based on the annotation information. To identify the genes involved in resistance, resequencing of two resistant inbred lines (12S2 and 12S3) and three susceptible inbred lines (12S1, 12S4, and 10S2) was performed. The three most likely candidate genes were identified via amino acid sequence analysis and conserved domain analysis between resistant and susceptible inbred lines. These included Spo12729, encoding a receptor-like protein, and Spo12784 and Spo12903, encoding a nucleotide-binding site and leucine-rich repeat domains. Additionally, based on the sequence variation in the three genes between the resistant and susceptible lines, molecular markers were developed for marker-assisted selection. The results could be valuable in cloning the RPF1 alleles and improving our understanding of the interaction between the host and pathogen.

     

Diversity of anaerobic arsenite-oxidizing bacteria in low-salt environments analyzed with a newly developed PCR-based method

Anaerobic arsenite oxidation is potentially important but the least understood process in the arsenic cycle. The catalytic subunit of the key enzyme for anaerobic arsenite oxidation is encoded by the arxA gene. In this study, a novel primer pair for the arxA gene was designed to detect diverse sequences of this notable gene. Further modification of the designed primer was made by adding extra bases to its 5′- end. This modification made it possible to analyze the PCR products with TA cloning, which provides higher throughput of investigations. With the combination of modified primer pair and TA cloning, diverse arxA gene sequences were effectively obtained from samples of lake water, spring water, and hot spring microbial mat. The sequences detected in the samples characterized by low salinity and nearly neutral pH were phylogenetically distinct from the majority of previously known arxA genes, found in the genome of alkaliphiles and halophiles.     

Expression of <Emphasis Type="Italic">GNA</Emphasis> and biting site-restricted <Emphasis Type="Italic">cry1Ac</Emphasis> in cotton; an efficient attribution to insect pest management strategies

Insect-resistant transgenic cotton has been commercialized for two decades. Most of the introduced cultivars express Bt gene(s) constitutively under the control of 35S promoter in whole-plant tissues. However, there have been other promoters considered by researchers to confine the toxin expression to targeted organ and tissues. We developed a triple-gene construct including GNA, cry1Ac and cp4 epsps genes. We attempted to confine cry1Ac expression to insect biting sites by cloning it to downstream of a wound-inducible promoter isolated from Asparagus officinalis (AoPR1). Moreover, to broaden the range of resistance, GNA was driven by the 35S promoter to target the sap-sucking insects like aphids which impose large losses in cotton production. To select the transformants in selection medium and for glyphosate tolerance, GNA and cry1Ac genes were accompanied with cp4 epsps gene. Two binary vectors harboring desired genes were constructed and utilized in the study (pGTGNAoC1AC and pGTGN35C1AC). Transformation of cultivar GSN-12 was carried out by employing Agrobacterium tumefaciens strain EHA105. Plantlets were primarily screened under glyphosate (N-phosphonomethyl glycine) selection pressure and subsequently subjected to molecular and biotoxicity assays. Introduction of cry1Ac and GNA to cotton plant conferred resistance to Spodoptera littoralis and Aphis gossypii Glover. Restriction of cry1Ac toxin protein to insect biting sites along with a plant lectin attributes significantly to insect pest management strategies.     

Cloning and expression of <Emphasis Type="Italic">nlpA</Emphasis> gene as DNA vaccine candidate against <Emphasis Type="Italic">Acinetobacter baumannii</Emphasis>

Acinetobacter baumannii is one of the highly antibiotic-resistant bacteria that cause infections with high rate of death. This bacterium is one the common causes of infection worldwide leading to endemic and epidemic nosocomial infections. Despite many efforts, there is no effective vaccine against A. baumannii. As NlpA is one of the important antigenic factors in biogenesis of outer membrane vesicles, and OMV-based reported vaccines in A. baumannii stimulated the immune responses, this study was aimed to clone and express nlpA gene in eukaryotic HDF cells and evaluate the induced immunization following the administration of resulting construct as DNA vaccine in BALB/c mice. The nlpA gene of A. baumannii was amplified using PCR. The PCR product was then cloned and subcloned into the pTZ57R/T and pEGFP-C2 vectors respectively. The cloning was confirmed by PCR, restriction enzyme digestion and DNA sequencing. The pEGFP-C2-nlpA recombinant plasmid was transferred into the HDF cells using electroporation and the expression of target gene was validated by RT-PCR. The recombinant construct was injected to BALB/c mice through three IM injections and the levels of IgG, IgM, INF-γ, IL-2, IL-4, and IL-12 were determined using ELISA assay. The A. baumannii nlpA gene was amplified during PCR as 867 bp band which was successfully cloned in pEGFP-C2-nlpA vector. Obtained data from RT-PCR and presence of the 867 bp fragment in transformed HDF cells confirmed the nlpA gene expression. Following the injection of pEGFP-C2-nlpA showed the increased level of IgG, IgM, INF-γ, IL-2, IL-4, and IL-12 in serum of immunized mice. Overall, through this study recombinant pEGFP-C2-nlpA was generated and successfully expressed the A. baumannii nlpA gene in eukaryotic cells. Additionally, our in vivo study confirmed that the recombinant construct capable to induce the immune response in immunized mice. These findings suggest the pEGFP-C2-nlpA may be considered as DNA vaccine candidate against A. baumannii.     

Cloning of <Emphasis Type="Italic">rec</Emphasis>A gene of <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> and phenotypic complementation of <Emphasis Type="Italic">Escherichia coli</Emphasis> recombinant deficient strain

Nucleotide and amino acid sequences of Corynebacterium glutamicum recA genes, from GenBank, were compared in silico. On the basis of the identity found between sequences, two degenerate primers were designed on the two sides of the deduced open reading frame (ORF) of the recA gene. PCR experiments, for amplifying the recA ORF region, were done. pGEM^®-T Easy vector was selected to be used for cloning PCR products. Then recA ORF was placed under the control of Escherichia coli hybrid trc promoter, in pKK388-1 vector. pKK388-1 vector, containing recA ORF, was transformed to E. coli DH5α ΔrecA (recombinant deficient strain), in an attempt to phenotypically complement it. Ultraviolet (u.v.) exposure experiments of the transformed and non-transformed E. coli DH5α ΔrecA cells revealed tolerance of transformed cells up to dose 0.24 J/cm², while non-transformed cells tolerated only up to dose 0.08 J/cm². It is concluded that phenotypic complementation of E. coli DH5α ΔrecA with recA ORF of C. glutamicum, could be achieved and RecA activity could be restored.     

<Emphasis Type="Italic">In situ</Emphasis>transduction of target cells on solid surfaces by immobilized viral vectors

Background

For both in vitro and in vivo gene transfer applications, recombinant viral vectors have almost always been used free in solution. Some site-specificity of the delivery of viral vectors can be achieved by applying a solution containing viral particles specifically to the site of interest. However, such site-specificity is seriously limited since viral vectors can diffuse freely in solution after application.

Results

We have developed a novel strategy for in situ transduction of target cells on solid surfaces by viral vectors. In this strategy, adenoviral vectors are attached stably to solid surfaces by using the extremely tight interaction between (strept)avidin and biotin, while maintaining the infectivity of the viral vectors. Target cells are cultured directly on such virus-coated solid surfaces, resulting in the transduction of the cells, in situ, on the solid surface. When compared using an equal number of viral particles present in each well (either immobilized or free), the efficiencies of such in situ transduction on solid surfaces were equivalent to those seen with the adenoviral vectors used free in solution. Since viral particles can be attached at desired locations on solid surfaces in any sizes, shapes, and patterns, the ultimate spatial arrangements of transduced cells on solid surfaces can be predetermined at the time of the preparation of the virus-coated solid surfaces.

Conclusions

We have devised a method of immobilizing adenoviral vectors, tightly and stably, on solid surfaces, while maintaining their ability to infect cells. Such immobilized viral vectors can infect target cells, in situ, on solid surfaces. This strategy should be very useful for the development of a variety of both in vitro and in vivo applications, including the creation of cell-based expression arrays for proteomics and drug discovery and highly site-specific delivery of transgenes for gene therapy and tissue engineering.

     

Zn finger-based direct detection system for PCR products of <Emphasis Type="Italic">Salmonella</Emphasis> spp. and the Influenza A virus

We have detected PCR products from Salmonella spp. and Influenza A virus using Zn finger protein Zif268 and Sp1, respectively. Previously, we demonstrated a novel method of rapid and specific detection of PCR products from Legionella pneumophila genome using Zn finger protein Sp1. In principle, this methodology might be applied to the detection of most bacteria and viruses using various Zn finger proteins. Here, to demonstrate the wider applicability of our method, we detected PCR products from Salmonella spp. and the Influenza A virus. BLAST data indicated the Zif268 and Sp1 recognition sequence were located on the gyrB gene of Salmonella spp. and the nucleoprotein gene of Influenza A virus, respectively. The PCR products from the oligonucleotide corresponding to the gyrB gene of Salmonella spp. or the nucleoprotein gene of the Influenza A virus could be specifically detected by ELISA or fluorescence depolarization measurement using Zif268 or Sp1. These results indicate the wide applicability of our novel methodology.     

PCR-diagnosis of <Emphasis Type="Italic">Anaplasma marginale</Emphasis> in cattle populations of Ecuador and its molecular identification through sequencing of ribosomal 16S fragments

Background

Bovine anaplasmosis is an endemic disease in tropical and subtropical areas. It is caused by a bacterium named Anaplasma marginale, and represents an economic problem for cattle farmers due to the losses it generates, such as: mortalities, reduced production, quarantine measures, treatments and control of vectors. The method most often used to diagnose this haemotrophic bacterium is direct examination on blood smear, which sensitivity and specificity are limited compared to other methods such as PCR. The present study aimed at investigating the presence of A. marginale in dairy cattle of Luz de América commune, province of Santo Domingo de los Tsachilas. Two PCRs were used to amplify specific regions of the Rickettsia for its molecular identification.

Results

At first, 151 blood samples were tested: msp5 specific gene of A. marginale was identified in 130 samples, meaning 86.1% of them were infected by the rickettsia. Two positive samples were further randomly selected to confirm the presence of A. marginale through amplification, cloning and sequencing of the conserved region of gene 16S rRNA. The analysis of sequences obtained through cloning revealed a 100% identity between both samples and those registered in GenBank for A. marginale.

Conclusion

This is the first report and molecular identification of A. marginale in the bovine population of Ecuador and its prevalence was high at the level of farms and animals. These results demonstrate the importance of proceeding to evaluate and characterize bovine Anaplasmosis in Ecuador in order to establish control measures and reduce their impact.