A metal-chelating microscopy tip as a new toolbox for single-molecule experiments by atomic force microscopy

In recent years, the atomic force microscope (AFM) has contributed much to our understanding of the molecular forces involved in various high-affinity receptor-ligand systems. However, a universal anchor system for such measurements is still required. This would open up new possibilities for the study of biological recognition processes and for the establishment of high-throughput screening applications. One such candidate is the N-nitrilo-triacetic acid (NTA)/His-tag system, which is widely used in molecular biology to isolate and purify histidine-tagged fusion proteins. Here the histidine tag acts as a high-affinity recognition site for the NTA chelator. Accordingly, we have investigated the possibility of using this approach in single-molecule force measurements. Using a histidine-peptide as a model system, we have determined the binding force for various metal ions. At a loading rate of 0.5 microm/s, the determined forces varied from 22 +/- 4 to 58 +/- 5 pN. Most importantly, no interaction was detected for Ca(2+) and Mg(2+) up to concentrations of 10 mM. Furthermore, EDTA and a metal ion reloading step demonstrated the reversibility of the approach. Here the molecular interactions were turned off (EDTA) and on (metal reloading) in a switch-like fashion. Our results show that the NTA/His-tag system will expand the "molecular toolboxes" with which receptor-ligand systems can be investigated at the single-molecule level.     

Suitability of immobilized metal affinity chromatography for protein purification from canola

This work demonstrates that proper selection of a metal ion and chelating ligand enables recovery of a his(6)-tagged protein from canola (Brassica napus) extracts by immobilized metal affinity chromatography (IMAC). When using Co(2+) with iminodiacetate (IDA) as the chelating ligand, beta-glucuronidase-his(6) (GUSH6) can be purified from canola protein extract with almost homogeneous purity in a single chromatographic step. The discrimination with which metal ions bound native canola proteins followed the order Cu(2+) < Ni(2+) < Zn(2+) < Co(2+) in regard to elimination of proteins coeluted with the fusion protein. IDA- and nitrilotriacetate (NTA)-immobilized metal ions showed different binding patterns, whose cause is attributed to a more rigid binding orientation of the his(6) in forming a tridentate with Me(2+)-IDA than in forming a bidentate with Me(2+)-NTA. The more flexible binding allows for multisite interactions over the protein.     

Oxygen reduction and lipid peroxidation by iron chelates with special reference to ferric nitrilotriacetate

A certain iron chelate, ferric nitrilotriacetate (Fe3+-NTA) is nephrotoxic and also carcinogenic to the kidney in mice and rats, a distinguishing feature not shared by other iron chelates tested so far. Iron-promoted lipid peroxidation is thought to be responsible for the initial events. We examined its ability to initiate lipid peroxidation in vitro in comparison with that of other ferric chelates. Chelation of Fe2+ by nitrilotriacetate (NTA) enhanced the autoxidation of Fe2+. In the presence of Fe2+-NTA, lipid peroxidation occurred as measured by the formation of conjugated diene in detergent-dispersed linoleate micelles, and by the formation of thiobarbituric acid-reactive substances in the liposomes of rat liver microsomal lipids. Addition of ascorbic acid to Fe3+-NTA solution promoted dose-dependent consumption of dissolved oxygen, which indicates temporary reduction of iron. On reduction, Fe3+-NTA initiated lipid peroxidation both in the linoleate micelles and in the liposomes. Fe3+-NTA also initiated NADPH-dependent lipid peroxidation in rat liver microsomes. Although other chelators used (deferoxamine, EDTA, diethylenetriaminepentaacetic acid, ADP) enhanced autoxidation, reduction by ascorbic acid, or in vitro lipid peroxidation of linoleate micelles or liposomal lipids, NTA was the sole chelator that enhanced all the reactions.     

Engineered fusion molecules at chelator lipid interfaces imaged by reflection interference contrast microscopy (RICM)

In molecular biology, biotechnology, and protein-engineering, the expression of histidine fusion proteins is a very powerful technique for the identification and one-step purification based on the interaction of the histidine stretch with immobilized metal complexes. By synthesis of a novel class of chelator lipids, this technique was combined with the concept of self-assembly leading to interfaces for immobilization and orientation of histidine-tagged biomolecules (Schmitt et al., 1994). Here, these chelator lipid layers were transferred onto solid substrate by vesicle fusion and Langmuir-Blodgett-techniques. Specific binding of a peptide containing an oligohistidine sequence to these functionalized interfaces was demonstrated by reflection interference contrast microscopy (RICM). Due to the phase separation behaviour of lipid mixtures, the chelator lipid interface could be further structured in two dimensions. Binding and organization of histidine-tagged molecules at these two-dimensional recognition arrays was imaged by RICM with a layer thickness resolution of 0·2 nm, and 0·5 μm laterally. Specific docking can be triggered by adding nickel ions and disrupted by EDTA. This concept opens up possibilities for reversible immobilization, enrichment and organization of histidine fusion proteins at interfaces and their application in biosensing.     

NTA-mediated protein capturing strategy in screening experiments for small organic molecules by surface plasmon resonance

Nitrilotriacetate (NTA)-mediated capture of a histidine-tagged protein is widely used as an easy and simple method to reversibly immobilize the protein onto a sensor chip for surface plasmon resonance (SPR). However, in spite of its advantages, the NTA-capturing strategy is rarely employed for ligand screening experiments using SPR, because it was thought to cause substantial errors in binding responses, due to the inevitable protein dissociation during the monitoring period. In this study, as demonstrated in a ligand screening for the histidine-tagged SH3 domain of the human phosphatidylinositol 3-kinase p85alpha subunit, false responses after adhesion of undesirable compounds to a target protein could be minimized with the NTA strategy, while binding responses of a positive control peptide still stayed within a 1%-deviation against the theoretical binding capacity.     

Holographic sensors for the detection of bacterial spores

Holographic sensors for the detection of Bacillus species spore germination and vegetative growth are described. Reflection holograms were fabricated using a diffusion method for the distribution of ultra-fine silver bromide grains into pre-formed polymer films, followed by holographic recording using a frequency doubled Nd:YAG (532 nm) laser. Changes in holographic replay wavelength or diffraction intensity were used to characterise the swelling behaviour or structural integrity of a range of holographic matrices in response to various extracellular products of bacterial spore germination and vegetative metabolism. Divalent metal ion-sensitive holograms containing a methacrylated analogue of nitrilotriacetic acid (NTA) as the chelating monomer were successfully used to monitor Ca2+ ions released during B. subtilis spore germination in real-time, which was within minutes of sample addition; the holographic response manifested as a 16 nm blue-shift in diffraction wavelength over the progress of germination. Similarly, pH-sensitive holograms comprising methacrylic acid (MAA) as the ionisable monomer were responsive to changes in pH associated with early vegetative metabolism following germination of B. megaterium spores; a visually perceptible blue-shift in holographic replay wavelength of 75 nm was observed. Casein and starch-based holographic matrices, prepared by co-polymerisation of the appropriate substrate with acrylamide, were used to detect exo-enzymes released during later stages of B. megaterium and B. subtilis vegetative cell growth; holographic responses of both matrices were visible as a reduction in diffraction intensity due to progressive fringe disruption caused by enzymatic cleavage. The combined monitoring of various germination and growth events using the range of aforementioned holographic sensors provides a novel, comprehensive means for the detection of viable bacterial spores.     

Motility of dimeric ncd on a metal-chelating surfactant: evidence that ncd is not processive

The surface immobilization methods that allowed single-molecule motility experiments with native kinesin have not worked with the ncd motor protein and other kinesin-related motors. To solve this problem, a surfactant (Pluronic F108) was chemically modified with the metal-chelating group nitrilotriacetic acid (NTA) to allow surface immobilization of histidine-tagged microtubule motors. The chelating surfactant provided a convenient and effective method for immobilization and subsequent motility experiments with a dimeric H-tagged ncd protein (H-N195). In experiments with the absorption of H-N195 to polystyrene (PS) beads coated with F108-NTA, a monolayer of H-N195 bound in the presence of Ni2+, while in the absence of Ni2+, the extent of adsorption of H-N195 to PS beads was greatly reduced. In motility experiments with H-N195 immobilized on F108-NTA-coated surfaces, microtubules moved smoothly and consistently at an average speed of 0.16 +/- 0.01 micrometer/s in the presence of Ni2+, while without Ni2+, no microtubules landed on the F108-NTA-coated surfaces. Investigation of H-N195 motility on the F108-NTA surfaces provided several indications that ncd, unlike kinesin, is not processive. First, a critical H-N195 surface density for microtubule motility of approximately 250 molecules/micrometer(2) was observed. Second, microtubule landing rates as a function of H-N195 surface density in the presence of MgATP suggested that several H-N195 molecules must cooperate in microtubule landing. Third, the ATP KM in motility assays (235 microM) was substantially higher than the ATP KM of dimeric ncd in solution (23 microM) [Foster, K. A., Correia, J. J., and Gilbert, S. P. (1998) J. Biol. Chem. 273, 35307-35318].     

Bioelectrocatalytic application of titania nanotube array for molecule detection

A bioelectrocatalysis system based on titania nanotube electrode has been developed for the quantitative detection application. Highly ordered titania nanotube array with inner diameter of 60 nm and total length of 540 nm was formed by anodizing titanium foils. The functionalization modification was achieved by embedding glucose oxidases inside tubule channels and electropolymerizing pyrrole for interfacial immobilization. Morphology and microstructure characterization, electrochemical properties and bioelectrocatalytic reactivities of this composite were fully investigated. The direct detection of hydrogen peroxide by electrocatalytic reduction reaction was fulfilled on pure titania nanotube array with a detection limit up to 2.0 × 10⁻⁴ mM. A biosensor based on the glucose oxidase–titania/titanium electrode was constructed for amperometric detection and quantitative determination of glucose in a phosphate buffer solution (pH 6.8) under a potentiostatic condition (−0.4 V versus SCE). The resulting glucose biosensor showed an excellent performance with a response time below 5.6 s and a detection limit of 2.0 × 10⁻³ mM. The corresponding detection sensitivity was 45.5 μA mM⁻¹ cm⁻². A good operational reliability was also achieved with relative standard deviations below 3.0%. This novel biosensor exhibited quite high response sensitivity and low detection limit for potential applications.     

Micelles based on biodegradable poly(L-glutamic acid)-b-polylactide with paramagnetic Gd ions chelated to the shell layer as a potential nanoscale MRI-visible delivery system

There is much interest in the development of a nanoscale drug delivery system with MRI visibility to optimize the delivery efficiency and therapeutic efficacy under image guidance. Here we report on the successful fabrication of nanoscale micelles based on biodegradable poly( L-glutamic acid)- b-polylactide (PG- b-PLA) block copolymer with paramagnetic Gd3+ ions chelated to their shell. PG- b-PLA was synthesized by sequential polymerization reactions: anionic polymerization of L-lactide followed by ring-opening polymerization of benzyl glutamate N-carboxylic anhydride. The metal chelator p-aminobenzyldiethylenetriaminepenta(acetic acid) (DTPA) was readily conjugated to the side chain carboxylic acids of poly( L-glutamic acid). The resulting copolymer formed spherical micelles in aqueous solution with an average diameter of 230 nm at pH 7.4. The size of PG(DTPA)- b-PLA micelles decreased with increasing pH value. DTPA-Gd chelated to the shell layer of the micelles exhibited significantly higher spin-lattice relaxivity (r1) than a small-molecular-weight MRI contrast agent, indicating that water molecules could readily access the Gd ions in the micelles. Because of the presence of multiple carboxylic acid functional groups in the shell layer, polymeric micelles based on biodegradable PG(DTPA-Gd)- b-PLA may be a suitable platform for the development of MRI-visible, targeted nanoscale drug delivery systems.     

A metal-chelating piezoelectric sensor chip for direct detection and oriented immobilization of polyHis-tagged proteins

A metal-chelating piezoelectric (PZ) chip for direct detection and controlled immobilization of polyHis-tagged proteins has been demonstrated. The chip was prepared by covalently binding a hydrogel matrix complex of oxidized dextran and nitrilotriacetic acid (NTA) ligand onto an activated alkanethiol-modified PZ crystal. The resulting chip effectively captured Ni2+ ions onto its NTA surface, as disclosed by the resonant frequency shift of the crystal and an X-ray photoelectron spectroscopy analysis. The real-time frequency analysis revealed that the bare NTA chip was nonfouling, regenerable, and highly reusable during continuous repetitive injections of ion solutions and binding proteins. In addition, the chip displayed good long-term reusability and storage stability. The individual binding studies of a polyHis-tagged glutathione-S-transferase and its native untagged form on various metal-charged chips revealed that Co2+, Cu2+, and Ni2+ ions each had different immobilization ability on the NTA surface, as well as their binding ability and selectivity with the tagged protein. As a result, the tagged protein immobilized on the Ni2+-charged chip can actively be bound with its antibody and substrate. Further, the quantitative analyses of the tagged protein in crude cell lysate with a single Ni2+-charged chip and of its substrate with a protein-coated chip were also successfully demonstrated. Therefore, this study initiates the possibilities of oriented, reversible, and universal immobilization of any polyHis-tagged protein and its functional study using a real-time PZ biosensor.     

Metal ion chelating peptoids with potential as anti-oxidants: complexation studies with cupric ions

The cupric ion binding characteristics of the chelator EDTA bis (ethyl tyrosinate) are reported. Potentiometric studies in aqueous solutions over the pH range of 2.0-12.0 allowed identification and quantification of the species in solution. The principal species CuA predominates over the physiological pH range of 4.0-8.0 pH units. The logarithm of the stability constant (log beta(pqr)) for this species is 16.43. The cupric ion binding characteristics were further assessed using electronic absorption spectroscopic investigations. These results support the use of this chelator as a metal binding anti-oxidant.     

Isothermal titration calorimetric procedure to determine protein-metal ion binding parameters in the presence of excess metal ion or chelator

Determination of binding parameters for metal ion binding to proteins usually requires preceding steps to remove protein-bound metal ions. Removal of bound metal ions from protein is often associated with decreased stability and inactivation. We present two simple isothermal titration calorimetric procedures that eliminate separate metal ion removal steps and directly monitor the exchange of metal ions between buffer, protein, and chelator. The concept is to add either excess chelator or metal ion to the protein under investigation and subsequently titrate with metal ion or chelator, respectively. It is thereby possible in the same experimental trial to obtain both chelator-metal ion and protein-metal ion binding parameters due to the different thermodynamic "fingerprints" of chelator and protein. The binding models and regression routines necessary to analyze the corresponding binding isotherms have been constructed. Verifications of the models have been done by titrations of mixtures of calcium chelators (BAPTA, HEDTA, and EGTA) and calcium ions and they were both able to account satisfactorily for the observed binding isotherms. Therefore, it was possible to determine stoichiometric and thermodynamic binding parameters. In addition, the concept has been tested on a recombinant alpha-amylase from Bacillus halmapalus where it proved to be a consistent procedure to obtain calcium binding parameters.     

Growth of thin processable films of poly(pyrrole) using phosphomolybdate clusters

Facile control over the chemical polymerization of pyrrole from solutions of pyrrole-phosphomolybdic acid has allowed processibility of conducting poly(pyrrole). This approach has allowed thin conducting films of poly(pyrrole) to be deposited in a single step, and in contrast to electrochemical polymerization methods, is not limited to electrically conducting substrates. For example, 40–100 nm thick poly(pyrrole) films with conducivities in the range of 15 to 30 S cm⁻¹ have been spin coated onto insulating glass substrates. Insight into the mechanism of polymerization has been obtained with cyclic voltammetry and UV-Vis spectroscopy.     

Allosteric inhibition of rat liver and kidney arginase by copper and mercury ions

Two isozyme forms of arginase are found in the rat. All arginases are metalloenzymes which require manganese for activity. Many arginases are activated by cobalt and nickel ions and inhibited by heavy metal ions. The purpose of this study was to compare the effect of other heavy metal ions on the rat liver isozyme (arginase I) and the rat kidney isozyme (arginase II). The activation and inhibition of arginase I and II by metal ions were different. However, both isozymes were strongly inhibited by cupric and mercuric ions. The inhibition of arginase I by cupric and mercuric ions was increased greatly by preincubation of the enzyme with the metal ions. However, preincubation of arginase II by cupric and mercuric ions had little effect on the inhibition of the enzyme. Under certain conditions the kinetics of the inhibition of both arginases I and II by cupric and mercuric ions was nonlinear allosteric.     

Synthesis of tentacle-type magnetic beads as immobilized metal-chelate affinity support for cytochrome c adsorption

Magnetic poly(2-hydroxyethylmethacrylate) (mPHEMA) beads with an average diameter of 100-140 microm were produced by suspension polymerization in the presence of magnetite particles (i.e. Fe3O4). Specific surface area and average pore size of the magnetic beads was found to be 50 m2/g and 819 nm, respectively. Ester groups in the mPHEMA structure were converted to imine groups by reacting with poly(ethyleneimine) (PEI) in the presence of NaH. Amino (-NH2) content of PEI-attached mPHEMA beads was determined as 102 mg PEI/g. Then, Cu2+ ions were chelated on the magnetic beads in the range of 20-793 micromol Cu2+/g. Cytochrome c (cyt c) adsorption was performed on the metal chelating beads from aqueous solutions containing different amounts of cyt c at different pHs, Cu2+ loadings and temperatures. Cyt c adsorption on the mPHEMA/PEI beads was 4.6 mg/g. Cu2+ chelation increased the cyt c adsorption significantly (40.1 mg/g). Adsorption capacity increased with Cu2+ loading and then reached a saturation value. Cyt c adsorption decreased with increasing temperature. Cyt c molecules could be reversibly adsorbed and eluted ten times with the magnetic adsorbents without noticeable loss in their cyt c adsorption capacity. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. In the last part of this article, cyt c adsorption experiments were performed in a magnetically stabilized fluidized bed (MSFB) system at optimum conditions determined from the batch experiments. The adsorption capacity decreased significantly from 46.8 to 15.4 mg/g polymer with the increase of the flow-rate from 0.5 to 4.0 ml/min. The resulting magnetic chelator beads possessed excellent long-term storage stability.     

Anion exchange in human serum transferrin N-lobe: a model study with variant His249Ala

The removal of Fe(III) from human serum transferrin by chelators is thought to proceed through intermediate species in which the chelator becomes associated with the metal center of the protein. The visible spectral shifts associated with the formation of such intermediates in the wild-type (WT) protein are too small for reliable kinetic data to be obtained. Therefore, studies were undertaken with the recombinant N-terminal lobe variant H249A, a variant showing more pronounced spectral changes. The kinetics of the synergistic anion-exchange reaction between nitrilotriacetate (NTA) and carbonate in variant H249A was studied by stopped-flow spectrophotometry as a model for this process in the WT protein. Anion exchange occurs by two pathways at pH 7.4 and 25 degrees C: an NTA-independent dissociative pathway to form a carbonate-free intermediate Fe-H249A (Eq. 1) that subsequently reacts with NTA (Eq. 2):and an NTA-dependent associative pathway (the major pathway) in which a quaternary Fe-H249A-(CO(3))(NTA) intermediate is formed (Eq. 3), which then decays to product (Eq. 4):The reverse reaction, where HCO(3)(-) exchanges for NTA, likewise follows these two pathways. The overall apparent equilibrium constant for formation of Fe-H249A-NTA from Fe-H249A-CO(3) is K'=442 at pH 7.4. The NTA complex is favored over the carbonate complex both kinetically and thermodynamically in the pH range 7.4-8.2.     

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.     

Examination of the protein binding behaviour of immobilised copper (II)-2,6-diaminomethylpyridine and its application in the immobilised metal ion affinity chromatographic separation of several human serum proteins.

A new metal ion chelator has been developed for use in the immobilised metal ion affinity chromatography (IMAC) of proteins. The aromatic tridentate ligand 2,6-diaminomethylpyridine (bisampyr), 1, was prepared as the dihydrochloride salt, via a two step synthesis from 2,6-pyridinedimethanol, 2, and immobilised onto Sepharose CL-4B through an epoxide coupling procedure. The resulting sorbent was chelated with Cu2+ ions to a density of 420 micromol Cu2+ ions per g gel and then characterised by frontal analysis using the protein, horse heart myoglobin (HMYO), at pH 7.0 and 9.0. From the resulting adsorption isotherms, the adsorption capacity, qm, for HMYO at pH 7.0 and pH 9.0 with the immobilised Cu2+-bisampyr Sepharose sorbent was found to be 1.27 micromol protein/g gel and 1.43 micromol protein/g gel, whilst the corresponding dissociation constants, K(D)s, were 18.0 x 10(-6) M and 16.0 x 10(-6) M respectively. The results confirm that the HMYO-Cu2+-bisampyr complex had similar stability at these pH values. This finding is in contrast with the situation observed with some other commonly used IMAC chelating ligates such as Cu2+-iminodiacetic acid (Cu2+-IDA) or Cu2+-nitrilotriacetic acid (Cu2+-NTA). Using human serum proteins, the interactive properties of the immobilised Cu2+-bisampyr Sepharose sorbent were further characterised at pH 5.0, 7.0 and 9.0 with specific reference to the binding behaviour of albumin, transferrin, and alpha2-macroglobulin.     

Reversible major histocompatibility complex I-peptide multimers containing Ni(2+)-nitrilotriacetic acid peptides and histidine tags improve analysis and sorting of CD8(+) T cells

MHC-peptide multimers containing biotinylated MHC-peptide complexes bound to phycoerythrin (PE) streptavidin (SA) are widely used for analyzing and sorting antigen-specific T cells. Here we describe alternative T cell-staining reagents that are superior to conventional reagents. They are built on reversible chelate complexes of Ni(2+)-nitrilotriacetic acid (NTA) with oligohistidines. We synthesized biotinylated linear mono-, di-, and tetra-NTA compounds using conventional solid phase peptide chemistry and studied their interaction with HLA-A*0201-peptide complexes containing a His(6), His(12), or 2×His(6) tag by surface plasmon resonance on SA-coated sensor chips and equilibrium dialysis. The binding avidity increased in the order His(6) < His(12) < 2×His(6) and NTA(1) < NTA(2) < NTA(4), respectively, depending on the configuration of the NTA moieties and increased to picomolar K(D) for the combination of a 2×His(6) tag and a 2×Ni(2+)-NTA(2). We demonstrate that HLA-A2-2×His(6)-peptide multimers containing either Ni(2+)-NTA(4)-biotin and PE-SA- or PE-NTA(4)-stained influenza and Melan A-specific CD8+ T cells equal or better than conventional multimers. Although these complexes were highly stable, they very rapidly dissociated in the presence of imidazole, which allowed sorting of bona fide antigen-specific CD8+ T cells without inducing T cell death as well as assessment of HLA-A2-peptide monomer dissociation kinetics on CD8+ T cells.     

Immobilized metal ion affinity partitioning of cells in aqueous two-phase systems: erythrocytes as a model

Immobilized metal ion affinity partitioning of erythrocytes from different species is described. We have explored the affinity between transition metal chelates and metal-binding sites situated on the cell surface by partitioning in aqueous two-phase system composed of poly(ethylene glycol) and dextran. Soluble metal-chelate-poly(ethylene glycol) was prepared by fixing metal ions to poly(ethylene glycol) via the covalently bonded chelator, iminodiacetic acid. The partitioning behaviour of erythrocytes in systems at different concentrations of the ligand was tested. The copper-chelate-poly(ethylene glycol) was quite effective in the affinity extraction of human and rabbit erythrocytes, while the zinc-chelate-poly(ethylene glycol) displayed significant affinity only to the rabbit cells. Furthermore, the influence of various effectors such as imidazole, sialic acid on immobilized metal ion affinity partitioning of erythrocytes was examined.