Substitution of the 2'-hydroxyl group at position 2.1 by an amino group interferes with Mg(2+) binding and efficient cleavage by hammerhead ribozyme.

Recently we have demonstrated that hammerhead ribozymes can be fully substituted with 2'-amino pyrimidines without detriment to the catalytic activity, provided that positions 2.2 and/or 2.1 are not modified. We now report on the potential molecular mechanisms by which 2'-amino groups at these positions inhibit the ribozyme cleavage activity. In the presence of Mg(2+), the 2'-amino modification at positions 2.2 and/or 2.1 had no significant effect on substrate binding. Detailed analysis of the ribozyme initial cleavage rates in the presence of various Mg(2+) concentrations indicated that Mg(2+) binding is inhibited by the 2'-amino group at position 2.1. Furthermore, preannealed substrate molecules to the modified ribozyme are not effectively cleaved upon Mg(2+) addition, indicating an alteration of the ribozyme cleavage step. Surprisingly, the cleavage activity of the modified ribozymes was substantially increased when Mg(2+) ions were replaced by the thiophilic Mn(2+) ions, whereas only a moderate cleavage enhancement occurred with its unmodified version. Taken together, our findings indicate that changes in the sugar at position 2.1 alter Mg(2+)-promoting ribozyme cleavage.     

Cross-linking experiments reveal the presence of novel structural features between a hepatitis delta virus ribozyme and its substrate

The kinetic pathway of a trans-acting delta ribozyme includes an essential structural rearrangement involving the P1 stem, a stem that is formed between the substrate and the ribozyme. We performed cross-linking experiments to determine the substrate position within the catalytic center of an antigenomic, trans-acting, delta ribozyme. Substrates that included a 4-thiouridine either in position -1, +4, or +8 (i.e., adjacent to the cleavage site, or located either in the middle of or at the 3'-end of the P1 stem, respectively) were synthesized and shown to be efficiently cleaved. Examination of the cross-linking conditions, the use of various mutated ribozymes, as well as the probing and characterization of the resulting ribozyme-substrate complexes, revealed several new features of the molecular mechanism: (1) the close proximity of several bases between nucleotides of the substrate and ribozyme; (2) the active ribozyme-substrate complex folds in a manner that docks the middle of the P1 stem on the P3 stem, while concomitantly the scissile phosphate is in close proximity to the catalytic cytosine; and, (3) some complexes appear to be compatible with being active intermediates along the folding pathway, while others seem to correspond to misfolded structures. To provide a model representation of these data, a three-dimensional structure of the delta ribozyme was developed using several RNA bioinformatic software packages.     

Diffusely bound Mg2+ ions slightly reorient stems I and II of the hammerhead ribozyme to increase the probability of formation of the catalytic core

The hammerhead ribozyme is one of the best-studied small RNA enzymes, yet is mechanistically still poorly understood. We measured the Mg(2+) dependencies of folding and catalysis for two distinct hammerhead ribozymes, HHL and HH alpha. HHL has three long helical stems and was previously used to characterize Mg(2+)-induced folding. HH alpha has shorter stems and an A.U tandem next to the cleavage site that increases activity approximately 10-fold at 10 mM Mg(2+). We find that both ribozymes cleave with fast rates (5-10 min(-1), at pH 8 and 25 degrees C) at nonphysiologically high Mg(2+) concentrations, but with distinct Mg(2+) dissociation constants for catalysis: 90 mM for HHL and 10 mM for HH alpha. Using time-resolved fluorescence resonance energy transfer, we measured the stem I-stem II distance distribution as a function of Mg(2+) concentration, in the presence and absence of 100 mM Na(+), at 4 and 25 degrees C. Our data show two structural transitions. The larger transition (with Mg(2+) dissociation constants in the physiological range of approximately 1 mM, below the catalytic dissociation constants) brings stems I and II close together and is hindered by Na(+). The second, globally minor, rearrangement coincides with catalytic activation and is not hindered by Na(+). Additionally, the more active HH alpha exhibits a higher flexibility than HHL under all conditions. Finally, both ribozyme-product complexes have a bimodal stem I-stem II distance distribution, suggesting a fast equilibrium between distinct conformers. We propose that the role of diffusely bound Mg(2+) is to increase the probability of formation of a properly aligned catalytic core, thus compensating for the absence of naturally occurring kissing-loop interactions.     

Kinetic and binding analysis of the catalytic involvement of ribose moieties of a trans-acting delta ribozyme

We have identified ribose 2'-hydroxyl groups (2'-OHs) that are critical for the activity of a trans-cleaving delta ribozyme derived from the antigenomic strand of the hepatitis delta virus. Initially, an RNA-DNA mixed ribozyme composed of 26 deoxyribo- (specifically the nucleotides forming the P2 stem and the P4 stem-loop) and 31 ribonucleotides (those forming the catalytic center) was engineered. This mixed ribozyme catalyzed the cleavage of a small substrate with kinetic parameters virtually identical to those of the all-RNA ribozyme. The further substitution of deoxyribose for ribose residues permitted us to investigate the contribution of all 2'-OHs to catalysis. Determination of the kinetic parameters for the cleavage reaction of the resulting ribozymes revealed (i) 10 2'-OH groups appear to be important in supporting the formation of several hydrogen bonds within the catalytic core, (ii) none of the important 2'-OHs seem to coordinate a magnesium cation, and (iii) 1 of the tested RNA-DNA mixed polymers appeared to stabilize the ribozyme-substrate transition-state complex, resulting in an improvement over the all-RNA counterpart. The contribution of the 2'-OHs to the catalytic mechanism is discussed, and differences with the crystal structure of a genomic delta self-cleaved product are explained. Clearly, the 2'-OHs are essential components of the network of interactions involved in the formation of the catalytic center of the delta ribozyme.     

The kinetics and magnesium requirements for the folding of antigenomic delta ribozymes

Using an oligonucleotide hybridization assay to gain insight into the folding of delta ribozymes, we demonstrate a correlation between their folding and catalytic behavior. Together with recent structural information on the crystal structure of self-cleaved genomic delta ribozyme, in which the L3 loop interacts with J1/4 to form the newly proposed stem P1.1, we conclude that it is likely that the P1.1 stem forms only in the presence of Mg(2+). This stem can be detected in both the self-cleaved and trans-acting delta ribozymes. When the trans-acting version of antigenomic delta ribozyme was studied, it is demonstrated that its L3 loop requires magnesium and, apparently, formation of the P1 stem for the subsequently formation of the P1.1 stem. Most importantly, the kinetics were monitored, and provide a significant addition to our understanding of ribozyme tertiary structure formation prior to the chemical cleavage step. Using previous kinetic data and our new findings, we discuss the rate-limiting characteristics of delta ribozyme folding.     

Terbium-mediated footprinting probes a catalytic conformational switch in the antigenomic hepatitis delta virus ribozyme

The two forms of the hepatitis delta virus ribozyme are derived from the genomic and antigenomic RNA strands of the human hepatitis delta virus (HDV), where they serve a crucial role in pathogen replication by catalyzing site-specific self-cleavage reactions. The HDV ribozyme requires divalent metal ions for formation of its tertiary structure, consisting of a tight double-nested pseudoknot, and for efficient self- (or cis-) cleavage. Comparison of recently solved crystal structures of the cleavage precursor and 3' product indicates that a significant conformational switch is required for catalysis by the genomic HDV ribozyme. Here, we have used the lanthanide metal ion terbium(III) to footprint the precursor and product solution structures of the cis-acting antigenomic HDV ribozyme. Inhibitory Tb(3+) binds with high affinity to similar sites on RNA as Mg(2+) and subsequently promotes slow backbone scission. We find subtle, yet significant differences in the terbium(III) footprinting pattern between the precursor and product forms of the antigenomic HDV ribozyme, consistent with differences in conformation as observed in the crystal structures of the genomic ribozyme. In addition, UV melting profiles provide evidence for a less tight tertiary structure in the precursor. In both the precursor and product we observe high-affinity terbium(III) binding sites in joining sequence J4/2 (Tb(1/2) approximately 4 microM) and loop L3, which are key structural components forming the catalytic core of the HDV ribozyme, as well as in several single-stranded regions such as J1/2 and the L4 tetraloop (Tb(1/2) approximately 50 microM). Sensitized luminescence spectroscopy confirms that there are at least two affinity classes of Tb(3+) binding sites. Our results thus demonstrate that a significant conformational change accompanies catalysis in the antigenomic HDV ribozyme in solution, similar to the catalytic conformational switch observed in crystals of the genomic form, and that structural and perhaps catalytic metal ions bind close to the catalytic core.     

Two distinct catalytic strategies in the hepatitis δ virus ribozyme cleavage reaction

The hepatitis delta virus (HDV) ribozyme and related RNAs are widely dispersed in nature. This RNA is a small nucleolytic ribozyme that self-cleaves to generate products with a 2',3'-cyclic phosphate and a free 5'-hydroxyl. Although small ribozymes are dependent on divalent metal ions under biologically relevant buffer conditions, they function in the absence of divalent metal ions at high ionic strengths. This characteristic suggests that a functional group within the covalent structure of small ribozymes is facilitating catalysis. Structural and mechanistic analyses have demonstrated that the HDV ribozyme active site contains a cytosine with a perturbed pK(a) that serves as a general acid to protonate the leaving group. The reaction of the HDV ribozyme in monovalent cations alone never approaches the velocity of the Mg(2+)-dependent reaction, and there is significant biochemical evidence that a Mg(2+) ion participates directly in catalysis. A recent crystal structure of the HDV ribozyme revealed that there is a metal binding pocket in the HDV ribozyme active site. Modeling of the cleavage site into the structure suggested that this metal ion can interact directly with the scissile phosphate and the nucleophile. In this manner, the Mg(2+) ion can serve as a Lewis acid, facilitating deprotonation of the nucleophile and stabilizing the conformation of the cleavage site for in-line attack of the nucleophile at the scissile phosphate. This catalytic strategy had previously been observed only in much larger ribozymes. Thus, in contrast to most large and small ribozymes, the HDV ribozyme uses two distinct catalytic strategies in its cleavage reaction.     

Effects of cobalt hexammine on folding and self-cleavage of the Neurospora VS ribozyme

We have investigated the effects of Co(NH3)6(3+), an analog of hexahydrated Mg2+, on folding and catalysis of the Neurospora VS ribozyme. Most of the metal ion-induced changes detected by chemical modification structure probing in either metal ion are similar, but occur at approximately 33-fold lower concentrations of Co(NH3)6(3+) than Mg2+. However, Co(NH3)6(3+) is not as effective at inducing two functionally important structural changes: stabilizing the pseudoknot interaction between loops I and V, and rearranging the secondary structure of helix Ib. Comparison of the folding of the precursor and the downstream cleavage product, which lacks helix Ia, shows that helix Ia inhibits stable pseudoknot formation and rearrangement of helix Ib. The VS ribozyme does not self-cleave with Co(NH3)6(3+) as the sole polyvalent cation; however, mixed-metal kinetic experiments show that Co(NH3)6(3+) does not inhibit Mg2+-induced self-cleavage. In contrast, at sub-saturating concentrations of Mg2+, Co(NH3)6(3+) increases the rate of Mg2+-induced self-cleavage, indicating that Co(NH3)6(3+) contributes to the functionally relevant folding of the VS ribozyme.     

Delta ribozyme has the ability to cleave in transan mRNA.

We report here the first demonstration of the cleavage of an mRNA in trans by delta ribozyme derived from the antigenomic version of the human hepatitis delta virus (HDV). We characterized potential delta ribozyme cleavage sites within HDV mRNA sequence (i.e. C/UGN6), using oligonucleotide binding shift assays and ribonuclease H hydrolysis. Ribozymes were synthesized based on the structural data and then tested for their ability to cleave the mRNA. Of the nine ribozymes examined, three specifically cleaved a derivative HDV mRNA. All three active ribozymes gave consistent indications that they cleaved single-stranded regions. Kinetic characterization of the ability of ribozymes to cleave both the full-length mRNA and either wild-type or mutant small model substrate suggests: (i) delta ribozyme has turnovers, that is to say, several mRNA molecules can be successively cleaved by one ribozyme molecule; and (ii) the substrate specificity of delta ribozyme cleavage is not restricted to C/UGN6. Specifically, substrates with a higher guanosine residue content upstream of the cleavage site (i.e. positions -4 to -2) were always cleaved more efficiently than wild-type substrate. This work shows that delta ribozyme constitutes a potential catalytic RNA for further gene-inactivation therapy.     

Delta ribozyme benefits from a good stability in vitro that becomes outstanding in vivo

The stability of a trans-acting delta ribozyme was studied under various conditions. Although in vitro (i.e., in the presence of protein extracts) this delta ribozyme appears to be only slightly more stable than a hammerhead ribozyme, in vivo (i.e., after cell transfection) it exhibits an outstanding stability that manifests itself in the calculated half-life of over 100 h regardless of the means of transfection. The P2 stem, which includes both the 5' and 3' ends, is shown to play a critical role in this stability. Direct mutagenesis of the most nuclease susceptible nucleotides failed to generate a more stable ribozyme that retained the same catalytic potential. Clearly, delta ribozyme appears to be well adapted to the human cell environment, and is therefore ideal for the development of a gene-inactivation system.     

A thermodynamic framework and cooperativity in the tertiary folding of a Mg2+-dependent ribozyme

The folding thermodynamics of the catalytic domain from the Bacillus subtilis RNase P RNA is analyzed using circular dichroism and fluorescence spectroscopies, hydroxyl radical protection, and catalytic activity. Folding of this 255-nucleotide ribozyme can be described with three populated species: unfolded (U), intermediate (I), and native (N) states. The U-to-I transition primarily involves secondary structure formation, whereas the I-to-N transition is dominated by tertiary structure formation. The I-to-N transition is highly cooperative as indicated by the coincidence of the four probes applied here. Two isothermal methods are used to determine the stability of the N state relative to the I state at 10 and 37 degrees C. The first method measures the extent of Mg(2+)-induced folding without urea or at constant urea concentrations. The second method measures the extent of urea-induced unfolding at constant Mg(2+) concentrations. Via application of a cooperative binding analysis, the Mg(2+) transition midpoint (K(Mg)), the Hill constant (n), and the urea-dependent surface burial parameter (m value) determined by both methods are identical, indicating that they report the same, reversible folding event. Three conclusions can be drawn from these results. (i) The folding free energy of a Mg(2+)-dependent tertiary RNA structure can be described by the K(Mg) and n parameters according to a cooperative Mg(2+) binding model. (ii) The Hill constant for this tertiary RNA structure probably represents the differential number of Mg(2+) ions bound in the I-to-N transition. (iii) Under physiological conditions, the stability of this large ribozyme is similar to that of small globular proteins.     

Metal binding motif in the active site of the HDV ribozyme binds divalent and monovalent ions

The hepatitis delta virus (HDV) ribozyme uses both metal ion and nucleobase catalysis in its cleavage mechanism. A reverse G·U wobble was observed in a recent crystal structure of the precleaved state. This unusual base pair positions a Mg(2+) ion to participate in catalysis. Herein, we used molecular dynamics (MD) and X-ray crystallography to characterize the conformation and metal binding characteristics of this base pair in product and precleaved forms. Beginning with a crystal structure of the product form, we observed formation of the reverse G·U wobble during MD trajectories. We also demonstrated that this base pair is compatible with the diffraction data for the product-bound state. During MD trajectories of the product form, Na(+) ions interacted with the reverse G·U wobble in the RNA active site, and a Mg(2+) ion, introduced in certain trajectories, remained bound at this site. Beginning with a crystal structure of the precleaved form, the reverse G·U wobble with bound Mg(2+) remained intact during MD simulations. When we removed Mg(2+) from the starting precleaved structure, Na(+) ions interacted with the reverse G·U wobble. In support of the computational results, we observed competition between Na(+) and Mg(2+) in the precleaved ribozyme crystallographically. Nonlinear Poisson-Boltzmann calculations revealed a negatively charged patch near the reverse G·U wobble. This anionic pocket likely serves to bind metal ions and to help shift the pK(a) of the catalytic nucleobase, C75. Thus, the reverse G·U wobble motif serves to organize two catalytic elements, a metal ion and catalytic nucleobase, within the active site of the HDV ribozyme.     

Crystal structure of the leadzyme at 1.8 A resolution: metal ion binding and the implications for catalytic mechanism and allo site ion regulation

The leadzyme is a small ribozyme, derived from in vitro selection, which catalyzes site specific, Pb(2+)-dependent RNA cleavage. Pb(2+) is required for activity; Mg(2+) inhibits activity, while many divalent and trivalent ions enhance it. The leadzyme structure consists of an RNA duplex interrupted by a trinucleotide bulge. Here, crystal structures determined to 1.8 A resolution, both with Mg(2+) as the sole divalent counterion and with Mg(2+) and Sr(2+) (which mimics Pb(2+) with respect to binding but not catalysis), reveal the metal ion interactions with both the ground state and precatalytic conformations of the leadzyme. Mg(H(2)O)(6)(2+) ions bridge complementary strands of the duplex at multiple locations by binding tandem purines of one RNA strand in the major groove. At one site, Mg(H(2)O)(6)(2+) ligates the phosphodiester backbone of the trinucleotide bulge in the ground state conformation, but not in the precatalytic conformation, suggesting (a) Mg(2+) may inhibit leadzyme activity by stabilizing the ground state and (b) metal ions which displace Mg(2+) from this site may activate the leadzyme. Binding of Sr(2+) to the presumed catalytic Pb(2+) site in the precatalytic leadzyme induces local structural changes in a manner that would facilitate alignment of the catalytic ribose 2'-hydroxyl with the scissile bond for cleavage. These data support a model wherein binding of a catalytic ion to a precatalytic conformation of the leadzyme, in conjunction with the flexibility of the trinucleotide bulge, may facilitate structural rearrangements around the scissle phosphodiester bond favoring configurations that allow bond cleavage.     

Mutational analysis of the antigenomic trans-acting delta ribozyme: the alterations of the middle nucleotides located on the P1 stem

Our previous report on delta ribozyme cleavage using a trans -acting antigenomic delta ribozyme and a collection of short substrates showed that the middle nucleotides of the P1 stem, the substrate binding site, are essential for the cleavage activity. Here we have further investigated the effect of alterations in the P1 stem on the kinetic and thermodynamic parameters of delta ribozyme cleavage using various ribozyme variants carrying single base mutations at putative positions reported. The kinetic and thermodynamic values obtained in mutational studies of the two middle nucleotides of the P1 stem suggest that the binding and active sites of the delta ribozyme are uniquely formed. Firstly, the substrate and the ribozyme are engaged in the formation of a helix, known as the P1 stem, which may contain a weak hydrogen bond(s) or a bulge. Secondly, a tertiary interaction involving the base moieties in the middle of the P1 stem likely plays a role in defining the chemical environment. As a con-sequence, the active site might form simultaneously or subsequently to the binding site during later steps of the pathway.     

Metal-phosphate interactions in the hammerhead ribozyme observed by 31P NMR and phosphorothioate substitutions

The hammerhead ribozyme is a catalytic RNA that requires divalent metal cations for activity under moderate ionic strength. Two important sites that are proposed to bind metal ions in the hammerhead ribozyme are the A9/G10.1 site, located at the junction between stem II and the conserved core, and the scissile phosphate (P1.1). (31)P NMR spectroscopy in conjunction with phosphorothioate substitutions is used in this study to investigate these putative metal sites. The (31)P NMR feature of a phosphorothioate appears in a unique spectral window and can be monitored for changes upon addition of metals. Addition of 1-2 equiv of Cd(2+) to the hammerhead with an A9-S(Rp) or A9-S(S)(Rp) substitution results in a 2-3 ppm upfield shift of the (31)P NMR resonance. In contrast, the P1.1-S(Rp) and P1.1-S(Sp) (31)P NMR features shift slightly and in opposite directions, with a total change in delta of 相似文献   

Magnesium dependence of the amplified conformational switch in the trans-acting hepatitis delta virus ribozyme

The ability of divalent metal ions to participate in both structure formation and catalytic chemistry of RNA enzymes (ribozymes) has made it difficult to separate their cause and effect in ribozyme function. For example, the recently solved crystal structures of precursor and product forms of the cis-cleaving genomic hepatitis delta virus (HDV) ribozyme show a divalent metal ion bound in the active site that is released upon catalysis due to an RNA conformational change. This conformational switch is associated with a repositioning of the catalytically involved base C75 in the active-site cleft, thus controlling catalysis. These findings confirm previous data from fluorescence resonance energy transfer (FRET) on a trans-acting form of the HDV ribozyme that found a global conformational change to accompany catalysis. Here, we further test the conformational switch model by measuring the Mg(2+) dependence of the global conformational change of the trans-acting HDV ribozyme, using circular dichroism and time-resolved FRET as complementary probes of secondary and tertiary structure formation, respectively. We observe significant differences in both structure and Mg(2+) affinity of the precursor and product forms, in the presence and absence of 300 mM Na(+) background. The precursor shortens while the product extends with increasing Mg(2+) concentration, essentially amplifying the structural differences observed in the crystal structures. In addition, the precursor has an approximately 2-fold and approximately 13-fold lower Mg(2+) affinity than the product in secondary and tertiary structure formation, respectively. We also have compared the C75 wild-type with the catalytically inactive C75U mutant and find significant differences in global structure and Mg(2+) affinity for both their precursor and product forms. Significantly, the Mg(2+) affinity of the C75 wild-type is 1.7-2.1-fold lower than that of the C75U mutant, in accord with the notion that C75 is essential for a catalytic conformational change that leads to a decrease in the local divalent metal ion affinity and release of a catalytic metal. Thus, a consistent picture emerges in which divalent metal ions and RNA functional groups are intimately intertwined in affecting structural dynamics and catalysis in the HDV ribozyme.     

Mechanistic characterization of the HDV genomic ribozyme: assessing the catalytic and structural contributions of divalent metal ions within a multichannel reaction mechanism

Hepatitis delta virus (HDV) uses genomic and antigenomic ribozymes in its replication cycle. We examined ribozyme self-cleavage over eight orders of magnitude of Mg(2+) concentration, from approximately 10(-9) to 10(-1) M. These experiments were carried out in 1 M NaCl to aid folding of the ribozyme and to control the ionic strength. The concentration of free Mg(2+) ions was established using an EDTA-Mg(2+) buffered system. Over the pH range of 5-9, the rate was independent of Mg(2+) concentration up to 10(-7) M, and of the addition of a large excess of EDTA. This suggests that in the presence of 1 M NaCl, the ribozyme can fold and cleave without using divalent metal ions. Br?nsted analysis under these reaction conditions suggests that solvent and hydroxide ions may play important roles as general base and specific base catalysts. The observed rate constant displayed a log-linear dependence on intermediate Mg(2+) concentration from approximately 10(-7) to 10(-4) M. These data combined with the shape of the pH profile under these conditions are consistent with the binding of at least one structural divalent metal ion that does not participate in catalysis and binds tighter at lower pH. No evidence for a catalytic role for Mg(2+) was found at low or intermediate Mg(2+) concentrations. Addition of Mg(2+) to physiological and higher concentrations, from 10(-3) to 10(-1) M, revealed a second saturable divalent metal ion which binds tighter at high pH. The shape of the pH profile is inverted relative to that at low Mg(2+) concentrations, consistent with a general acid-base catalysis mechanism in which a cytosine (C75) acts as the general acid and a hydroxide ion from the divalent metal ion, or possibly from solvent, acts as the base. Overall, the data support a model in which the HDV ribozyme can self-cleave by multiple divalent ion-independent and -dependent channels, and in which the contribution of Mg(2+) to catalysis is modest at approximately 25-fold. Surface electrostatic potential maps were calculated on the self-cleaved form of the ribozyme using the nonlinear Poisson-Boltzmann equation. These calculations revealed several patches of high negative potential, one of which is present in a cleft near N4 of C75. These calculations suggest that distinct catalytic and structural metal ion sites exist on the ribozyme, and that the negative potential at the active site may help shift the pK(a) for N3 of C75 toward neutrality.     

The P5abc peripheral element facilitates preorganization of the tetrahymena group I ribozyme for catalysis

Phylogenetic comparisons and site-directed mutagenesis indicate that group I introns are composed of a catalytic core that is universally conserved and peripheral elements that are conserved only within intron subclasses. Despite this low overall conservation, peripheral elements are essential for efficient splicing of their parent introns. We have undertaken an in-depth structure-function analysis to investigate the role of one of these elements, P5abc, using the well-characterized ribozyme derived from the Tetrahymena group I intron. Structural comparisons using solution-based free radical cleavage revealed that a ribozyme lacking P5abc (E(DeltaP5abc)) and E(DeltaP5abc) with P5abc added in trans (E(DeltaP5abc).P5abc) adopt a similar global tertiary structure at Mg(2+) concentrations greater than 20 mM [Doherty, E. A., et al. (1999) Biochemistry 38, 2982-90]. However, free E(DeltaP5abc) is greatly compromised in overall oligonucleotide cleavage activity, even at Mg(2+) concentrations as high as 100 mM. Further characterization of E(DeltaP5abc) via DMS modification revealed local structural differences at several positions in the conserved core that cluster around the substrate binding sites. Kinetic and thermodynamic dissection of individual reaction steps identified defects in binding of both substrates to E(DeltaP5abc), with > or =25-fold weaker binding of a guanosine nucleophile and > or =350-fold weaker docking of the oligonucleotide substrate into its tertiary interactions with the ribozyme core. These defects in binding of the substrates account for essentially all of the 10(4)-fold decrease in overall activity of the deletion mutant. Together, the structural and functional observations suggest that the P5abc peripheral element not only provides stability but also positions active site residues through indirect interactions, thereby preferentially stabilizing the active ribozyme structure relative to alternative less active states. This is consistent with the view that peripheral elements engage in a network of mutually reinforcing interactions that together ensure cooperative folding of the ribozyme to its active structure.     

Ribozyme cleavage of a 2,5-phosphodiester linkage: mechanism and a restricted divalent metal-ion requirement.

The natural substrate cleaved by the hepatitis delta virus (HDV) ribozyme contains a 3',5'-phosphodiester linkage at the cleavage site; however, a 2',5'-linked ribose-phosphate backbone can also be cleaved by both trans-acting and self-cleaving forms of the HDV ribozyme. With substrates containing either linkage, the HDV ribozyme generated 2',3'-cyclic phosphate and 5'-hydroxyl groups suggesting that the mechanisms of cleavage in both cases were by a nucleophilic attack on the phosphorus center by the adjacent hydroxyl group. Divalent metal ion was required for cleavage of either linkage. However, although the 3',5'-linkage was cleaved slightly faster in Ca2+ than in Mg2+, the 2',5'-linkage was cleaved in Mg2+ (or Mn2+) but not Ca2+. This dramatic difference in metal-ion specificity is strongly suggestive of a crucial metal-ion interaction at the active site. In contrast to the HDV ribozymes, cleavage at a 2',5'-phosphodiester bond was not efficiently catalyzed by the hammerhead ribozyme. The relaxed linkage specificity of the HDV ribozymes may be due in part to lack of a rigid binding site for sequences 5' to the cleavage site.