Capillary zone electrophoresis of collagen type I CNBr peptides in acid buffers

Collagen type-I CNBr peptides were separated under acidic conditions by capillary electrophoresis. Separation conditions were: 100 mM phosphate buffer pH 2.5, 50 cm × 50 μm capillary (placed in a cartridge), 8 kV, running time 30–45 min, detection by UV at 200 nm. The peptides were separated strictly by their molecular mass and the overall pattern was well comparable to RP-HPLC separations of these analytes. It is proposed that the separation mechanism may involve hydrophobic sorptions to the capillary wall.     

Determination of iothalamate in rat urine,plasma, and tubular fluid by capillary electrophoresis

A method for the quantitative determination of iothalamate (IOT) in rat urine, plasma and tubular fluid by capillary zone electrophoresis (CE) has been developed and validated. Samples of urine and tubular fluids were diluted with water and samples of plasma were deproteinized with two volumes of acetonitrile containing the internal standard, p-aminobenzoic acid (PABA). A BioFocus 2000 system (Bio-Rad, Hercules, CA, USA) was used. The UV detector was set at 254 nm. The samples were loaded into uncoated fused-silica capillary (40 cm×50 μm) by pressure injection. A borate buffer [20 mM, pH 12 (pH adjusted with 1.0 M NaOH)] was used as the electrophoretic buffer. The typical analytical conditions were: voltage, 22 kV; injection, 9 psi×s; capillary and carousel temperatures were 20°C and 18°C respectively. The linear relationship was observed between time-corrected peak area of IOT in water and urine or the corrected peak area ratio of IOT to PABA in plasma and the nominal concentration of IOT with correlation coefficient greater than 0.999. The intra- and inter-day coefficients of variation (CV) were less than 8%. The concentration of IOT in plasma, urine and tubular fluid determined by CE can be used for estimation of whole kidney and single nephron clearances.     

Detection of a mixed-backbone oligonucleotide (GEM 231) in liver and tumor tissues by capillary electrophoresis

A simple, rapid and sensitive method has been developed and validated for the analysis of a mixed-backbone oligonucleotide (GEM 231) in tumor tissues. The analysis was performed using a capillary electrophoresis (CE) system with UV detection. An extended light path (bubble cell) capillary column of 64.5 cm (effective length 56 cm)×50 μm I.D. is used as the separation column. The optimized chromatographic conditions were background electrolyte: sodium borate buffer (60 mM, pH 9.1), electrokinetic injection: 10 s, applied voltage: 30 kV, detection at λ=210 nm. A linear relationship was observed between the peak area and the amount of GEM 231 in the range of 1.0–1000 μg/ml. The lower detection limit of the drug was 100 pg with an average recovery of about 75±5%. The inter-day and intra-day relative standard deviations were <10%. Assay validation studies revealed that CE method is reproducible and specific for the determination of GEM 231 in tissue homogenates with a run time of less than 5 min.     

Separation of the eleven priority pollutant phenols by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) provides highly efficient separation of the eleven US EPA priority pollutant phenols. All of these phenols are completely resolved in fewer than 15 min in a 100 cm × 75 μm I.D. uncoated fused-silica capillary at 22.5 kV using a pH 9.8 phosphate-borate buffer. Buffer pH is the most critical parameter controlling resolution and separation time. A simple theoretical treatment greatly simplifies the pH optimization procedure. The effects on the separation of buffer concentration, applied voltage, and sample quantity injected were studied. Good calibration data were obtained for phenol concentrations up to 50 mb/l. Limits of detection for all phenols were less than 1 ppm.     

Effect of polyanions on the refolding of human acidic fibroblast growth factor.

Acidic fibroblast growth factor (aFGF) is unstable at physiological temperatures in the absence of polyanions such as heparin. Therefore, the effect of temperature on the kinetics of refolding of aFGF has been examined in the presence and absence of several polyanions. The protein folds into its native state at temperatures up to 30 degrees C without polyanions with an activation energy of approximately 14 kcal/mol, but does not acquire native structure above this temperature. When heparin, inositol hexasulfate, or sulfate ion are present, aFGF refolds below 30 degrees C with a slightly reduced activation energy (10-11 kcal/mol). In addition, the protein now also renatures between 30 and 50 degrees C with activation energies of 1-2 (heparin), 16 (inositol hexasulfate), and 7 (sulfate) kcal/mol. Trace heavy metals appear to inhibit the refolding process, but a molecular chaperone (bovine 70-kDa heat shock cognate protein) and a peptidylprolyl isomerase (the FK506-binding protein) have no effect. It is concluded that the rate of refolding of aFGF at physiological temperatures is probably controlled by the interaction of a native-like state of the protein with an unknown polyanionic species.     

Lipase of Pseudomonas cepacia for biotechnological purposes: purification,crystallization and characterization

Commercial lipase (triacylglycerol lipase, EC 3.1.1.3) of Pseudomonas cepacia (Amano) has been purified to homogeneity by a single chromatography on phenyl Sepharose. The eluted lipase crystallized spontaneously at 4°C in the eluent, containing 58–69% 2-propanol. The yield of the lipase was 87–100% and the specific activity during the hydrolysis of triolein 5800 U/mg protein. This protein has a molecular weight of 34.1 kDa as analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Its purity was determined by SDS-Page and capillary zone electrophoresis to be ≥ 99%. Immobilization on Sepharose increased its stability in organic solvents. This lipase of P. cepacia differs from that of other Pseudomonas strains in respect of substrate specificity and during crystallization. It exhibits a high stability in organic solvents and supercritical carbon dioxide.     

Establishment and Evaluation of the Novel Tetramethylammonium‐L‐Hydroxyproline Chiral Ionic Liquid Synergistic System Based on Clindamycin Phosphate for Enantioseparation by Capillary Electrophoresis

Much attention has been paid to chiral ionic liquids (ILs) in analytical chemistry, especially its application in capillary electrophoresis (CE) enantioseparation. However, the investigation of chiral ionic liquids synergistic systems based on antibiotic chiral selectors has been reported in only one article. In this work, a novel chiral ionic liquid, tetramethylammonium‐L‐hydroxyproline (TMA‐L‐Hyp), was applied for the first time in CE chiral separation to evaluate its potential synergistic effect with clindamycin phosphate (CP) as the chiral selector. As observed, significantly improved separation was obtained in this TMA‐L‐Hyp/CP synergistic system compared to TMA‐L‐Hyp or a CP single system. Several primary factors that might influence the separation were investigated, including CP concentration, TMA‐L‐Hyp concentration, buffer pH, types and concentrations of organic modifier, applied voltage, and capillary temperature. The best results were obtained with a 40 mM borax buffer (pH 7.6) containing 30 mM TMA‐L‐Hyp, 80 mM CP, and 20% (v/v) methanol, while the applied voltage and temperature were set at 20 kV and 20°C, respectively. Chirality 27:598–604, 2015. © 2015 Wiley Periodicals, Inc.     

The fibroblast growth factor family: Structural and biological properties

This article sumarizes the structural and biological properties of the family of fibroblast growth factors (FGF). Basic FGF (bFGF) and acidic FGF (aFGF) are the best characterized members of this family. bFGF and aFGF are potent modulators of cell proliferation, motility and differentiation. They are also potent angiogenesis factors in vivo. Some of the important biological characteristics of bFGF and aFGF discussed in the review include the affinity of bFGF and aFGF for heparin, their lack of secretion in culture and their association with extracellular matrix. Recently, several oncogenes, 40–50% homologous in sequence to bFGF and aFGF have been identified. These include int-2, hst, K-fgf and FGF-5. The structural and biological properties of these FGF-related oncogenes are also discussed.     

Determination of Enantiomeric Impurity of Levamlodipine Besylate Bulk Drug by Capillary Electrophoresis Using Carboxymethyl-β-Cyclodextrin

A rapid capillary electrophoresis method using carboxymethyl-β-cyclodextrin (CM-β-CD) as chiral selector was developed and validated for the enantiomeric purity determination of levamlodipine besylate bulk drug. Several parameters for were optimized for a satisfactory enantioresolution, including pH of background electrolyte, the concentration of chiral selector, buffer concentration, capillary temperature and voltage. The highest resolution (Rs = 9.8) was obtained with 4 mM CM-β-CD dissolved in 40 mM phosphate buffer (pH 3.5), at temperature 25 °C and voltage 30 kV, normal polarity. This method was fully validated for the enantiomeric purity determination of the R-amlodipine at the 0.2 % level. The established method was validated in terms of selectivity, LOD and LOQ (0.001 and 0.003 mg mL^?1), linearity (y = 2.8943x + 0.1386, r ² = 0.9991), precision and accuracy (95–104 %). Finally, the method was further applied to investigate the enantiomeric purity of levamlodipine in bulk samples.     

Basic and acidic fibroblast growth factors modulate the epidermal growth factor receptor by a protein kinase C-independent pathway

Human acidic and basic fibroblast growth factors (aFGF and bFGF) inhibit epidermal growth factor (EGF) receptor binding in mouse Swiss 3T3 cells. Scatchard analysis indicates that aFGF and bFGF cause a decrease in the high affinity EGF receptor population, similar to that observed for activators of protein kinase C such as phorbol esters, platelet-derived growth factor (PDGF) and bombesin. However, unlike phorbol esters, aFGF and bFGF inhibit EGF binding in protein kinase C-deficient cells. The time course and dose response of inhibition of EGF binding by both aFGF and bFGF are very similar, with an ID50 of approximately 0.10 ng/ml. In contrast to bombesin but like PDGF, neither aFGF nor bFGF act on the EGF receptor through a pertussis toxin-sensitive G protein. These results indicate that both acidic and basic FGF depress high affinity EGF binding in Swiss 3T3 cells with similar potency through a protein kinase C/Gi-independent pathway.     

Investigation of enantioselective ligand–protein binding and displacement interactions using capillary electrophoresis

When a protein such as human serum albumin is added to the separation buffer in capillary electrophoresis, the mobility of solutes which bind to that protein may be altered. The change in mobility of the solute is a function both of the strength of the binding interaction, and the difference in mobility between the free solute and protein additive. By adding other ligands which themselves bind to the protein, the strength of the solute–protein binding may be modified, leading to a measurable change in the mobility of the solute. These effects are particularly striking for chiral compounds, where enantioselectivity may be completely lost on addition of a competitive ligand. Capillary electrophoresis with human serum ablumin as a buffer additive was used to separate the enantiomers of benzoin and three phenothiazine derivatives. A comparison of the binding of (S)-benzoin to human serum albumin as determined by capillary electrophoresis and by ultrafiltration was made. A variety of other ligands were then added to the buffer along with the protein, and the effects on mobility and enantioselectivity were studied. The displacers included (R)- and (S)-oxazepam hemisuccinate, (R)- and (S)-warfarin, nitrazepam, phenylbutazone, and octanoic acid. From the results obtained, it seems that capillary electrophoresis may be a useful, rapid method to screen for drug–drug interactions. There are some advantages of using this technique to study protein–ligand interactions: Only very small amounts of ligand are needed (useful when dealing with metabolites); for chiral compounds, if protein binding is stereoselective, then the method is also stereoselective, so single enantiomers are not needed; finally, measurements are obtained in solution, without the need for immobilization of the protein. A disadvantage is that the ligand and protein must have significantly different electrophoretic mobilities. © 1994 Wiley-Liss, Inc.     

Monitoring solution‐phase combinatorial library synthesis by capillary electrophoresis

Capillary electrophoresis has been applied to monitor model reactions in solution‐phase combinatorial chemistry. In particular, the simultaneous alkylation reactions of secondary amines with a series of benzyl halides has been investigated. Reactant and product concentrations were monitored using capillary electrophoresis in a non‐aqueous buffer system. The simplified sample preparation was a key feature making this an attractive method of analysis. The results demonstrate that capillary electrophoresis is a useful tool for monitoring reactions to determine initial rates, rate constants, and extinction correlation coefficients for quantitative analysis in combinatorial chemistry, and is a broadly applicable technique for the analysis of a variety of organic and bioorganic transformations. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng (Comb Chem) 61:169–177, 1998/1999.     

Determination of tamoxifen and metabolites in serum by capillary electrophoresis using a nonaqueous buffer system

Tamoxifen (TAM), an antiestrogen, is widely used to treat hormone-dependent breast cancer in post-menopausal women. TAM may be used as a chemopreventive agent in women of child-bearing age; however, few data exist describing potential TAM-induced fetal toxicity. In support of the National Toxicology Program's characterization of reproductive and developmental effects of TAM, this work describes an analytical technique utilizing capillary electrophoresis (CE) for the detection of circulating levels of TAM, N-desmethyltamoxifen (DMT), and 4-hydroxytamoxifen (4-HT) in maternal rodent serum. Greater than 90% of ³H-labeled TAM was extractable from serum using 98:2 hexane–isoamyl alcohol. Optimum separation of TAM, DMT, and 4-HT was obtained on a 57 cm×50 μm capillary using a nonaqueous buffer system of 1:1 methanol–acetonitrile containing 50 mM ammonium acetate and 1% acetic acid. 4-Dimethylaminopyridine was used as internal standard. Temperature and voltage were optimized at 40°C and 15 kV, respectively. The limit of detection of TAM by UV detection at 214 nm was approximately 800 amol. TAM and DMT were confirmed in serum of female rats 4 h following a single oral dose of 120 mg/kg. Transplacental exposure of TAM to fetal tissue will be evaluated using this technique.     

Thrombin inactivates acidic fibroblast growth factor but not basic fibroblast growth factor

Incubation of bovine brain derived acidic fibroblast growth factor (aFGF) with bovine or human thrombin, 0.5 NIH unit/mL, for 24 h at 37 degrees C results in cleavage of the mitogen, generating a 14-kilodalton fragment which has significantly reduced affinity for immobilized heparin as compared to aFGF, and is at least 50-fold less potent at stimulating mitogenesis. In addition, an 18 amino acid peptide, aFGF(123-140), is generated, identifying one of the thrombin cleavage sites as the Arg-122/Thr-123 bond. The peptide, aFGF(123-140), is neither mitogenic itself nor an inhibitor of the mitogenic activity of aFGF. The cleavage of aFGF by thrombin is inhibited by heparin (50 micrograms/mL) and is completely blocked by the irreversible thrombin inhibitors D-Phe-Pro-Arg chloromethyl ketone and hirudin. Incubation of aFGF with 50 units/mL thrombin at 37 degrees C results in rapid cleavage of the mitogen into several fragments. In contrast, incubation of bovine brain derived basic fibroblast growth factor with 1 unit/mL thrombin for 24 h, or 50 units/mL thrombin for 6 h, does not result in significant cleavage of mitogen. The results show that the C-terminal region of aFGF is of functional importance in both mitogenesis and heparin binding. Most importantly, a novel role for anionic heparin-binding growth factors and their fragments is indicated in physiologic and pathologic situations associated with thrombin generation.     

High-level synthesis in Escherichia coli of shortened and full-length human acidic fibroblast growth factor and purification in a form stable in aqueous solutions.

A highly efficient expression for human acidic fibroblast growth factor (aFGF) has been assembled to direct the synthesis of both shortened and native full-length aFGF. The full-length aFGF-154 form of the protein had not been produced before in Escherichia coli by genetic engineering, and is obtained with its initiator methionine removed. The high production of the aFGF allows one to circumvent the use of reversed-phase chromatography (RPC) during the purification procedure. Here, it is shown that RPC, routinely used to obtain pure preparations of recombinant aFGF, modifies its chemical and physical properties in an unfavorable manner.     

Investigation of maltodextrin‐based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium‐L‐arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin‐based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris‐H₃PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium‐L‐arginine. In addition, the chiral configuration of tetramethylammonium‐L‐arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.     

Determination of bromhexine and ambroxol in pharmaceutical dosage forms,urine and blood serum

Data presented in this paper show that bromhexine and its pharmacologically active metabolite can easily be determined by capillary zone electrophoresis. The composition of the running buffer had a significant effect on the reproducibility of the migration time for which a carrier solution containing 30 mM phosphate buffer (pH 3.0), 5 M urea and 10% (v/v) acetonitrile was used. The method was validated with respect to its response linearity and reproducibility. The method is suitable for the determination of bromhexine and ambroxol in several samples such as pharmaceuticals, urine and serum. Photodiode-array detection permitted the rapid identification of both drugs in the sample analyzed.     

Discrimination of granulocyte colony-stimulating factor isoforms by high-performance capillary electrophoresis

Granulocyte colony-stimulating factor (G-CSF) is a glycoprotein which acts primarily to stimulate the proliferation, differentiation and activation of committed progenitor cells of the neutrophil–granulocyte lineage into functionally mature neutrophils. The traditional biological assays employed to detect G-CSF are a myeloid bone marrow colony assay, a factor-dependent cell line specific for G-CSF and commercially available immunoassays. However, these methods will not distinguish between glycosylated and non-glycosylated forms of the molecule. In this study high-performance capillary electrophoresis (HPCE) was used to analyse glycosylated and non-glycosylated recombinant human granulocyte colony-stimulating factor (r-met-hG-CSF). Glycosylated G-CSF preparations contained human serum albumin (HSA), added as a protein carrier. Glycosylated and non-glycosylated G-CSFs were prepared in 40 mM Na₂HPO₄ buffer, pH 2.5, containing hydroxypropylmethylcellulose (HPMC) or 50 mM Na₂HPO₄ buffer, pH 9.0. Glycosylated G-CSF could be separated into two distinct glycoform populations at the lower pH studied. Differences in migration time and peak shape between glycosylated and non-glycosylated G-CSF were demonstrated. HPCE analysis of G-CSF produced using a baculovirus expression vector system revealed a further distinct G-CSF glycoform and demonstrated the resolving power of the technique.     

Capillary zone electrophoretic determination of the four vitamin C esters l-ascorbyl-2-phosphate,l-ascorbyl-2-sulfate,l-ascorbyl-2-diphosphate and l-ascorbyl-2-triphosphate in fish feed,plasma and tissue

A new and fast method for the determination of l-ascorbyl-2-phosphate, the 2-diphosphate, 2-triphosphate and the 2-sulfate ester in feed, fish plasma and tissue samples by capillary zone electrophoresis is described. The substances were extracted with a 200 mM potassium phosphate buffer pH 4.0. Separation was achieved using a 50 μm uncoated fused-silica bubble capillary of 40 cm length to the detector, which was set at 254 nm, and a 80 mM tricine buffer at pH 9.2. Repeatability checked on a trout feed sample revealed a migration time variation of 1.2% (n=24) and an area calculation variation of 2.8% (n=24). Detector response for l-ascorbyl-2-phosphate was linear up to at least 100 μg ml⁻¹. After administration of a high dose of l-ascorbyl-2-phosphate to rainbow trout, the compound was found in the stomach and intestine but not in plasma, proving a fast conversion to vitamin C.