Functional importance of conserved nucleotides at the histone RNA 3' processing site.

Histone pre-mRNA 3' processing is controlled by a hairpin element preceding the processing site that interacts with a hairpin-binding protein (HBP) and a downstream spacer element that serves as anchoring site for the U7 snRNP. In addition, the nucleotides following the hairpin and surrounding the processing site (ACCCA'CA) are conserved among vertebrate histone genes. Single to triple nucleotide mutations of this sequence were tested for their ability to be processed in nuclear extract from animal cells. Changing the first four nucleotides had no qualitative and little if any quantitative effects on histone RNA 3' processing in mouse K21 cell extract, where processing of this gene is virtually independent of the HBP. A gel mobility shift assay revealing HBP interactions and a processing assay in HeLa cell extract (where the contribution of HBP to efficient processing is more important) showed that only one of these mutations, predicted to extend the hairpin by one base pair, affected the interaction with HBP. Mutations in the next three nucleotides affected both the cleavage efficiency and the choice of processing sites. Analysis of these novel sites indicated a preference for the nucleotide 5' of the cleavage site in the order A > C > U > G. Moreover, a guanosine in the 3' position inhibited cleavage. The preference for an A is shared with the cleavage/polyadenylation reaction, but the preference order for the other nucleotides is different [Chen F, MacDonald CC, Wilusz J, 1995, Nucleic Acids Res 23:2614-2620].     

Assembly of a polyadenylation-specific 25S ribonucleoprotein complex in vitro.

Extracts from HeLa cell nuclei assemble RNAs containing the adenovirus type 2 L3 polyadenylation site into a number of rapidly sedimenting heterodisperse complexes. Briefly treating reaction mixtures prior to sedimentation with heparin reveals a core 25S assembly formed with substrate RNA but not an inactive RNA containing a U----C mutation in the AAUAAA hexanucleotide sequence. The requirements for assembly of this heparin-stable core complex parallel those for cleavage and polyadenylation in vitro, including a functional hexanucleotide, ATP, and a uridylate-rich tract downstream of the cleavage site. The AAUAAA and a downstream U-rich element are resistant in the assembly to attack by RNase H. The poly(A) site between the two protected elements is accessible, but is attacked more slowly than in naked RNA, suggesting that a specific factor or secondary structure is located nearby. The presence of a factor bound to the AAUAAA in the complex is independently demonstrated by immunoprecipitation of a specific T1 oligonucleotide containing the element from the 25S fraction. Precipitation of this fragment from reaction mixtures is blocked by the U----C mutation. However, neither ATP nor the downstream sequence element is required for binding of this factor in the nuclear extract, suggesting that recognition of the AAUAAA is an initial event in complex assembly.     

Functionally significant secondary structure of the simian virus 40 late polyadenylation signal

The structure of the highly efficient simian virus 40 late polyadenylation signal (LPA signal) is more complex than those of most known mammalian polyadenylation signals. It contains efficiency elements both upstream and downstream of the AAUAAA region, and the downstream region contains three defined elements (two U-rich elements and one G-rich element) instead of the single U- or GU-rich element found in most polyadenylation signals. Since many reports have indicated that the secondary structure in RNA may play a significant role in RNA processing, we have used nuclease structure analysis techniques to determine the secondary structure of the LPA signal. We find that the LPA signal has a functionally significant secondary structure. Much of the region upstream of AAUAAA is sensitive to single-strand-specific nucleases. The region downstream of AAUAAA has both double- and single-stranded characteristics. Both U-rich elements are predominately sensitive to the double-strand-specific nuclease RNase V(1), while the G-rich element is primarily single stranded. The U-rich element closest to AAUAAA contains four distinct RNase V(1)-sensitive regions, which we have designated structural region 1 (SR1), SR2, SR3, and SR4. Linker scanning mutants in the downstream region were analyzed both for structure and for function by in vitro cleavage analyses. These data show that the ability of the downstream region, particularly SR3, to form double-stranded structures correlates with efficient in vitro cleavage. We discuss the possibility that secondary structure downstream of the AAUAAA may be important for the functions of polyadenylation signals in general.     

Sequence and position requirements for uridylate-rich downstream elements of polyadenylation signals.

We have defined the positional and sequence requirements of U-rich downstream elements using a simian virus 40 late polyadenylation signal containing a substituted downstream region. A UUUUU element will significantly increase the efficiency of 3' end processing when placed between 6 and 25 bases downstream from the cleavage site. Positions in this interval closer than 15 bases from the cleavage site, however, were noticeably less efficient. Placement of the UUUUU element between +20 and +25 caused a partial shift in cleavage site usage to a CA motif at +4. Mutational analysis indicated that the sequence requirements at individual positions of the UUUUU element were somewhat flexible. Changing more than one base of the UUUUU sequence, however, severely diminished the ability of the element to mediate efficient 3' end processing. Finally, although hnRNP C proteins specifically interact with U-rich sequences, this protein--RNA interaction is not required for efficient in vitro polyadenylation.     

Upstream and downstream cis-acting elements for cleavage at the L4 polyadenylation site of adenovirus-2.

A study of the cis-acting elements involved in the 3' end formation of the RNAs from the major late L4 family of adenovirus-2 was undertaken. Series of 5' or 3' end deletion mutants and mutants harboring either internal deletions or substitutions were prepared and assayed for in vitro cleavage. This first allowed the demonstration of a sequence, located at -6 to -29, relative to AAUAAA, whose deletion or substitution reduces cleavage efficiency at the L4 polyadenylation site two to three fold. This upstream efficiency element 5' AUCUUUGUUGUC/AUCUCUGUGCUG 3' is constituted of a partially repeated 12 nucleotide long, UCG rich sequence. The activities of the 2 sequence elements in cleavage are additive. We also searched for regulatory sequences downstream of the L4 polyadenylation site. We found that the deletion or substitution of a 30 nucleotide long UCG rich sequence, between nucleotides +7 and +35 relative to the cleavage site and harboring a UCCUGU repeat reduces cleavage efficiency at least ten fold. A GUUUUU sequence, starting at +35 had no influence. Thus, the usage of the L4 polyadenylation site requires down-stream sequences different from the canonical GU or U boxes and is regulated by upstream sequence elements.     

Influence of the three nucleotides upstream of the initiation codon on expression of the Escherichia coli lacZ gene in Saccharomyces cerevisiae.

By introducing synthetic oligonucleotides into a lacZ-yeast expression vector a set of 47 plasmids (out of 64 possible) was generated, differing only in the three bases immediately upstream of the AUG initiation codon of the Escherichia coli lacZ gene. Expression of the beta-galactosidase fusion protein encoded by the different plasmids was determined in Saccharomyces cerevisiae by immunogel electrophoresis. Among the clones tested we found a factor 3 difference in expression. A slight nucleotide preference was found in positions -3(A > G > C = U) and -2 (G > C = U > A). The choice of the nucleotide at position -1 immediately 5' of the AUG did not effect translation efficiency. Increasing homology to the yeast consensus sequence (AAAAAAAUGUCU) was not concomitant with an increased translation efficiency. Our results indicate that the choice of nucleotides immediately preceding the initiation codon in yeast does not dramatically influence translation efficiency, as in prokaryotes or higher eukaryotes.     

Position-dependent sequence elements downstream of AAUAAA are required for efficient rabbit beta-globin mRNA 3' end formation

We previously demonstrated that a critical 35 bp region 3' of the AAUAAA is required for rabbit beta-globin mRNA 3' end formation. Recently, we synthesized and tested sequence elements derived from this region. Here, we report that a GU-rich and a U-rich sequence element are both required for efficient rabbit beta-globin mRNA 3' end formation. The efficiency of processing is restored to the wild-type level when the two elements are placed together and is greatly diminished when only one element is present. The level of 3' end formation is also decreased when the distance between the two elements is expanded. These results demonstrate that the GU-rich and U-rich elements function synergistically to restore efficient mRNA 3' end formation and that they most likely form a single requisite sequence 3' of the AAUAAA. Furthermore, we show that the effect of the GU-rich and U-rich sequence elements is position-dependent.     

The 64-kilodalton subunit of the CstF polyadenylation factor binds to pre-mRNAs downstream of the cleavage site and influences cleavage site location.

The CstF polyadenylation factor is a multisubunit complex required for efficient cleavage and polyadenylation of pre-mRNAs. Using an RNase H-mediated mapping technique, we show that the 64-kDa subunit of CstF can be photo cross-linked to pre-mRNAs at U-rich regions located downstream of the cleavage site of the simian virus 40 late and adenovirus L3 pre-mRNAs. This positional specificity of cross-linking is a consequence of CstF interaction with the polyadenylation complex, since the 64-kDa protein by itself is cross-linked at multiple positions on a pre-mRNA template. During polyadenylation, four consecutive U residues can substitute for the native downstream U-rich sequence on the simian virus 40 pre-mRNA, mediating efficient 64-kDa protein cross-linking at the downstream position. Furthermore, the position of the U stretch not only enables the 64-kDa polypeptide to be cross-linked to the pre-mRNA but also influences the site of cleavage. A search of the GenBank database revealed that a substantial portion of mammalian polyadenylation sites carried four or more consecutive U residues positioned so that they should function as sites for interaction with the 64-kDa protein downstream of the cleavage site. Our results indicate that the polyadenylation machinery physically spans the cleavage site, directing cleavage factors to a position located between the upstream AAUAAA motif, where the cleavage and polyadenylation specificity factor is thought to interact, and the downstream U-rich binding site for the 64-kDa subunit of CstF.     

Spatial constraints on polyadenylation signal function

Efficient cleavage and polyadenylation of eukaryotic messenger RNAs require at least two signal elements: an AAUAAA or closely related sequence located 7-30 base pairs (bp) upstream of the site of processing, and a G/U- or U-rich sequence located 3' to the cleavage site. The herpes simplex virus type 1 thymidine kinase (tk) gene contains two copies of the AATAAA hexanucleotide and a GT-rich region. We have shown that the first AATAAA and the GT-rich region are essential for efficient processing, both in vivo and in vitro, whereas the second AATAAA does not appear to play any role in the formation of tk mRNA 3' ends. The failure of a signal containing only the second AATAAA and the GT-rich element to signal cleavage and polyadenylation suggested that these two elements might be too close together to constitute a functional polyadenylation signal. The experiments described in this report were directed at determining the effects on mRNA 3' end formation of alterations in spacing between signal elements. Wild-type tk contains 19 bp between these two elements. Constructs were made in which an AATAAA and the GT-rich region were separated by various distances ranging from 7 to 43 bp. The quantity and location of 3' ends of the tk mRNA produced by these constructs in Cos-1 cells were measured by S1 nuclease protection analysis. Signal efficiency was gradually reduced as the separation between the two signal elements was increased; with a separation of 43 bp, the signal functioned at approximately one-eighth the efficiency of the parental construction. Bringing the two signals closer together resulted in decreased signal efficiency; with a separation of 7 or 9 bp, no tk mRNA polyadenylated within the normal region was produced. Altering the sequences between these two elements without changing the distance had small effects on processing efficiency.