The structure of cytochrome c3 from Desulfovibrio vulgaris Miyazaki at 2.5 A resolution

The structure of tetraheme cytochrome c3 isolated from Desulfovibrio vulgaris Miyazaki has been determined at 2.5 A resolution by an X-ray diffraction method. Protein phases were computed by the multiple isomorphous replacement method using the native and four heavy atom derivatives, anomalous scattering measurements of the latter being considered. The mean figure of merit was 0.77. Four heme groups are exposed on the surface of the molecule. There are some short helical segments in the polypeptide chain, and hair-pin turns are often observed at glycine and alanine residues.     

Theoretical studies on the redox-Bohr effect in cytochrome c 3 from Desulfovibrio vulgaris Hildenborough

 The pH dependence of the redox potentials in the tetrahemic cytochrome c ₃ from Desulfovibrio vulgaris Hildenborough (redox-Bohr effect) is here investigated using continuum electrostatics methods. The redox-Bohr effect seems to be associated with changes in the protonation state of charged residues in the protein, but the exact residues had not been identified. The global pK _a of this phenomenon is dependent on the redox state of the molecule, and the influence of the pH on the microscopic potential of each heme has been experimentally quantified. The availability of detailed experimental data provides us with important and unique guides to the performance of ab initio pK _a calculations aiming at the identification of the groups involved. These calculations were performed in several redox states along the reduction pathway, with the double objective of finding groups with redox-linked pK _a shifts, and absolute pK _as compatible with the redox-Bohr effect. The group with the largest pK _a shift along the reduction pathway is propionate D from heme I. Its effect on the redox potential of individual hemes, as calculated by electrostatic calculations, correlates very well with the experimental order of influence, making it a likely candidate. Abnormal titration of the same propionate has been experimentally observed on a homologous cytochrome c ₃ from a different strain, thus strengthening the theoretical result. However, its absolute calculated pK _a in the fully oxidised cytochrome is outside the zone where the phenomenon is known to occur, but the calculation shows a strong dependence on small conformational changes, suggesting large uncertainties in the calculated value. A group with a pK _a value within the experimentally observed range is propionate D from heme IV. Its influence on the redox potential of the hemes does not correlate with the experimental order, indicating that, although it may be one of the possible players on the phenomenon, it cannot be solely responsible for it. Mutation of the Lys45 residue is suggested as an indirect way of probing the importance of the propionate D from heme I in the mechanism. Non-heme groups may also be involved in this process; our calculations indicate His67 and the N-terminal as groups that may play a role. Accuracy and applicability of current continuum electrostatic methods are discussed in the context of this system. Received: 27 March 1997 / Accepted: 19 August 1997     

Direct electron transfer reactions of cytochrome c553 from Desulfovibrio vulgaris Hildenborough at indium oxide electrodes

The direct, heterogeneous, electron transfer reactions of cytochrome c553 from Desulfovibrio vulgaris Hildenborough have been studied at indium oxide optically transparent electrodes. These reactions have been studied using cyclic voltammetry and derivative cyclic voltabsorptometry and the kinetics of heterogeneous electron transfer is quasi-reversible. The thermodynamics and kinetics of electron transfer by this molecule can be studied at this electrode surface without the need for surface modification or the addition of surface promoters or mediators.     

Cloning and sequencing of the gene encoding cytochrome c553 from Desulfovibrio vulgaris Hildenborough.

The gene encoding cytochrome c553 from Desulfovibrio vulgaris Hildenborough was cloned by using two synthetic deoxyoligonucleotide probes. The amino acid sequence derived from the sequence of the gene differs from that reported by Bruschi and LeGall (Biochim. Biophys. Acta 271:48-60, 1972). Renewed protein sequencing confirmed the correctness of the DNA-derived sequence. The gene sequence indicates cytochrome c553 to be synthesized as a precursor protein with an NH2-terminal signal sequence of 24 residues.     

Functional expression of Desulfovibrio vulgaris Hildenborough cytochrome c3 in Desulfovibrio desulfuricans G200 after conjugational gene transfer from Escherichia coli.

Plasmid pJRDC800-1, containing the cyc gene encoding cytochrome c3 from Desulfovibrio vulgaris subsp. vulgaris Hildenborough, was transferred by conjugation from Escherichia coli DH5 alpha to Desulfovibrio desulfuricans G200. The G200 strain produced an acidic cytochrome c3 (pI = 5.8), which could be readily separated from the Hildenborough cytochrome c3 (pI = 10.5). The latter was indistinguishable from cytochrome c3 produced by D. vulgaris subsp. vulgaris Hildenborough with respect to a number of chemical and physical criteria.     

15N-labelling and preliminary heteronuclear NMR study of Desulfovibrio vulgaris Hildenborough cytochrome c553.

When using heteronuclear NMR, 15N-labelling is necessary for structural analysis, dynamic studies and determination of complex formation. The problems that arise with isotopic labelling of metalloproteins are due to their complex maturation process, which involves a large number of factors. Cytochromes c are poorly expressed in Escherichia coli and the overexpression that is necessary for 15N-labelling, requires an investigation of the expression host and special attention to growth conditions. We have succeeded in the heterologous expression and the complete and uniform isotopic 15N-labelling of the cytochrome c553 from Desulfovibrio vulgaris Hildenborough, in a sulphate-reducing bacterium, D. desulfuricans G200, by using a growth medium combining 15N-ammonium chloride and 15N-Celtone. These conditions allowed us to obtain approximately 0.8 mg x L-1 of pure labelled cytochrome c553. 1H and 15N-assignments for both the oxidized and the reduced states of cytochrome c553 were obtained from two-dimensional heteronuclear experiments. Pseudocontact effects due to the haem Fe3+ have been analysed for the first time through 15N and 1H chemical shifts in a c-type cytochrome.     

Sequential NMR resonance assignment and secondary structure of ferrocytochrome c553 from Desulfovibrio vulgaris Hildenborough.

Two-dimensional nuclear magnetic resonance spectroscopy was used to assign the proton resonances of ferrocytochrome c553 from Desulfovibrio vulgaris Hildenbourough at 37 degrees C and pH = 5.9. Only a few side-chain protons were not identified because of degeneracy or overlap. The spin systems of the 79 amino acids were identified by DQF-COSY and HOHAHA spectra in H2O and D2O. Sequential assignments were obtained from NOESY connectivities between adjacent amide, C alpha H, and C beta H protons. From sequential NH(i)----NH(i + 1) and long-range C alpha H(i)----NH(i + 3) connectivities, four stretches of helices were identified (2----8, 34----46, 53----59, 67----77). Long-range NOE between residues in three different helices provide qualitative information on the tertiary structure, in agreement with the general folding pattern of cytochrome c. The heme protons, including the propionate groups, were assigned, and the identification of Met 57 as sixth heme ligand was established. The dynamical behavior of the ring protons of the six tyrosines was analyzed in detail in terms of steric hindrance. The NMR data for ferrocytochrome c553 are consistent with the X-ray structure for the homologous cytochrome from D. vulgaris Miyazaki. On the basis of the secondary structure element and of observed chemical shift due to the heme ring current, a structural alignment of eukaryotic and prokaryotic cytochromes c is proposed.     

Biochemical and spectroscopic characterization of the high molecular weight cytochrome c from Desulfovibrio vulgaris Hildenborough expressed in Desulfovibrio desulfuricans G200.

The gene of high molecular weight, multiheme cytochrome c (Hmc) from the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough has been overexpressed in Desulfovibrio desulfuricans G200. The recombinant protein has been purified. Its molecular weight (65,600), amino acid composition, and NH2-terminal sequence were found to be identical to those of the wild-type protein. The recombinant protein has been spectroscopically characterized (optical spectrum, EPR, circular dichroism) and compared to the wild-type protein. We have found 16 hemes per molecule by iron analysis and the pyridine hemochrome test. Both high- and low-spin features were observed in the EPR spectrum. A detailed spin quantitation analysis indicates 1 or 2 high-spin hemes and 14 or 15 low-spin hemes per molecule. The redox potentials of the hemes determined by voltammetric techniques gave an average of three different values, 0, -100, and -250 mV (versus NHE), for the wild-type and the recombinant cytochrome. The low potential values are similar to the values observed for the bis(histidinyl) coordinated hemes of cytochrome c3. A comparison of the arrangement of heme binding sites and coordinated histidines in the amino acid sequences of cytochrome c3 and Hmc has shown that the latter contains four domains, three of which are complete c3-like domains, while the fourth represents an incomplete c3-like domain which may contain His-Met coordinated hemes. These data are in agreement with the detailed study of the number and types of hemes reported in this paper.     

Cloning, sequencing, and expression of the gene encoding the high-molecular-weight cytochrome c from Desulfovibrio vulgaris Hildenborough.

By using a synthetic deoxyoligonucleotide probe designed to recognize the structural gene for cytochrome cc3 from Desulfovibrio vulgaris Hildenborough, a 3.7-kb XhoI genomic DNA fragment containing the cc3 gene was isolated. The gene encodes a precursor polypeptide of 58.9 kDa, with an NH2-terminal signal sequence of 31 residues. The mature polypeptide (55.7 kDa) has 16 heme binding sites of the form C-X-X-C-H. Covalent binding of heme to these 16 sites gives a holoprotein of 65.5 kDa with properties similar to those of the high-molecular-weight cytochrome c (Hmc) isolated from the same strain by Higuchi et al. (Y. Higuchi, K. Inaka, N. Yasuoka, and T. Yagi, Biochim. Biophys. Acta 911:341-348, 1987). Since the data indicate that cytochrome cc3 and Hmc are the same protein, the gene has been named hmc. The Hmc polypeptide contains 31 histidinyl residues, 16 of which are integral to heme binding sites. Thus, only 15 of the 16 hemes can have bis-histidinyl coordination. A comparison of the arrangement of heme binding sites and coordinated histidines in the amino acid sequences of cytochrome c3 and Hmc from D. vulgaris Hildenborough suggests that the latter contains three cytochrome c3-like domains. Cloning of the D. vulgaris Hildenborough hmc gene into the broad-host-range vector pJRD215 and subsequent conjugational transfer of the recombinant plasmid into D. desulfuricans G200 led to expression of a periplasmic Hmc gene product with covalently bound hemes.     

Reduction of uranium by cytochrome c3 of Desulfovibrio vulgaris.

The mechanism for U(VI) reduction by Desulfovibrio vulgaris (Hildenborough) was investigated. The H2-dependent U(VI) reductase activity in the soluble fraction of the cells was lost when the soluble fraction was passed over a cationic exchange column which extracted cytochrome c3. Addition of cytochrome c3 back to the soluble fraction that had been passed over the cationic exchange column restored the U(VI)-reducing capacity. Reduced cytochrome c3 was oxidized by U(VI), as was a c-type cytochrome(s) in whole-cell suspensions. When cytochrome c3 was combined with hydrogenase, its physiological electron donor, U(VI) was reduced in the presence of H2. Hydrogenase alone could not reduce U(VI). Rapid U(VI) reduction was followed by a subsequent slow precipitation of the U(IV) mineral uraninite. Cytochrome c3 reduced U(VI) in a uranium-contaminated surface water and groundwater. Cytochrome c3 provides the first enzyme model for the reduction and biomineralization of uranium in sedimentary environments. Furthermore, the finding that cytochrome c3 can catalyze the reductive precipitation of uranium may aid in the development of fixed-enzyme reactors and/or organisms with enhanced U(VI)-reducing capacity for the bioremediation of uranium-contaminated waters and waste streams.     

Refined structure of cytochrome c3 at 1.8 A resolution

The structure of cytochrome c3 from the sulfate-reducing bacterium Desulfovibrio vulgaris Miyazaki has been successfully refined at 1.8 A resolution. The crystallographic R factor is 0.176 for 9907 significant reflections. The isotropic temperature factors of individual atoms were refined and a total of 47 water molecules located on the difference map were incorporated in the refinement. The four heme groups are closely packed, with adjacent pairs of heme planes being nearly perpendicular to each other. The fifth and the sixth ligands of the heme iron atoms are histidine residues with N epsilon 2-Fe distances ranging from 1.88 A to 2.12 A. The histidine co-ordination to the heme iron is different for each heme group. The heme groups are all highly exposed to solvent, although the actual regions exposed differ among the hemes. The four heme groups are located in different environments, and the heme planes are deformed from planarity. The differences in the heme structures and their environments indicate that the four heme groups are non-equivalent. The chemical as well as the physical properties of cytochrome c3 should be interpreted in terms of the structural non-equivalence of the heme groups. The characteristic secondary structural non-equivalence of the heme groups. The characteristic secondary structures of the polypeptide chain of this molecule are three short alpha-helices, two short beta-strands and ten reverse turns.     

Reduced hybrid cluster proteins (HCP) from Desulfovibrio desulfuricans ATCC 27774 and Desulfovibrio vulgaris (Hildenborough): X-ray structures at high resolution using synchrotron radiation

The hybrid cluster proteins from the sulfate reducing bacteria Desulfovibrio desulfuricans ATCC 27774 ( Dd) and Desulfovibrio vulgaris strain Hildenborough ( Dv) have been isolated and crystallized anaerobically. In each case, the protein has been reduced with dithionite and the crystal structure of the reduced form elucidated using X-ray synchrotron radiation techniques at 1.25 A and 1.55 A resolution for Dd and Dv, respectively. Although the overall structures of the proteins are unchanged upon reduction, there are significant changes at the hybrid cluster centres. These include significant movements in the position of the iron atom linked to the persulfide moiety in the oxidized as-isolated proteins and the sulfur atom of the persulfide itself. The nature of these changes is described and the implications with respect to the function of hybrid cluster proteins are discussed.     

Molecular dynamics simulations of the cytochrome c3-rubredoxin complex from Desulfovibrio vulgaris.

Molecular dynamics simulations have been carried out on the complex formed between the tetraheme cytochrome c3 and the iron protein rubredoxin from the sulfate-reducing bacterium Desulfovibrio vulgaris. These simulations were performed both with explicit solvent water molecules included, and without solvent molecules using a distance-dependent dielectric constant to approximate the screening effects of solvent. The results of both simulations are strikingly different, indicating that the representation of environmental effects is important in such simulations. For example, a striking adaptation of the two proteins seen in the nonsolvated simulation is not seen when explicit solvent water is included; in fact, the complex appears to become weaker in the solvated simulation. Nonetheless, the iron-iron distance decreases more significantly in the solvated simulation than in the nonsolvated simulation. It was found that in both cases molecular dynamics optimized the structures further than energy minimization alone.     

Structure of rubredoxin from Desulfovibrio vulgaris at 1.5 A resolution

The X-ray model of rubredoxin from Desulfovibrio vulgaris has been refined against 1.5 A X-ray diffraction data collected on a diffractometer. The final model comprises 395 non-hydrogen protein atoms, and 180 solvent O atoms. The final R-value for the model with calculated H atom positions included as fixed contributions is 0.098 over all reflections greater than 2 sigma I from infinity to 1.5 A. The error in co-ordinates is estimated to be 0.08 A. The solvent model was twice redetermined during the later stages of refinement and was instrumental in its success. One sequence error has been detected and corrected (Thr21----Asp). The iron-sulfur site bond angles are distorted from true tetrahedral symmetry, as found in other rubredoxin structures. A significant deviation from tetrahedral angles is seen at C alpha atoms 9, 10, 42 and 43, interior angles of the loops binding the iron atom. The planes of two aromatic groups, Tyr4 and Trp37, are nearly parallel to, and lie under, an extended system of atoms that includes the peptide bonds preceding the first cysteine residue of each cysteine loop as well as the cysteine side-chain, the iron, and the cysteine side-chain of the opposite loop, forming a previously unrecognized extended system that may function in electron transfer.     

Preliminary X-ray studies of the tetra-heme cytochrome c3 and the octa-heme cytochrome c3 from Desulfovibrio gigas

A tetra-heme and an octa-heme cytochrome c3 from the sulfate bacterium Desulfovibrio gigas have been crystallized. Diffraction quality crystals of the tetra-heme cytochrome are obtained from solution by the addition of polyethylene glycol at pH 6.5. The crystals are orthorhombic, space group P2(1)2(1)2 with unit cell parameters a = 42.27 A, b = 52.54 A and c = 52.83 A. The octa-heme cytochrome crystals develop from low ionic strength solutions of phosphate or Tris-Cl in the pH range 6.2-7.6. The crystals belong to the trigonal system, space group P3(1) or the enantiomorph P3(2), with unit cell parameters a = b = 57.4 A, c = 97.3 A, gamma = 120 degrees. Single crystal diffraction studies of the structures of these two low-potential cytochromes are in progress.