Folding and conformational consequences of glycine to alanine replacements at different positions in a collagen model peptide

The collagen model peptide T1-892 includes a C-terminal nucleation domain, (Gly-Pro-Hyp)(4), and an N-terminal (Gly-X-Y)(6) sequence taken from type I collagen. In osteogenesis imperfecta (OI) and other collagen diseases, single base mutations often convert one Gly to a larger residue, and T1-892 homologues modeling such mutations were synthesized with Gly to Ala substitutions in either the (Gly-Pro-Hyp)(4) domain, Gly25Ala, or the (Gly-X-Y)(6) domain, Gly10Ala. CD and NMR studies show the Gly10Ala peptide forms a normal triple-helix at the C-terminal end and propagates from the C- to the N-terminus until the Gly --> Ala substitution is encountered. At this point, triple-helix folding is terminated and cannot be reinitiated, leaving a nonhelical N-terminus. A decreased thermal stability is observed as a result of the shorter length of the triple-helix. In contrast, introduction of the Gly to Ala replacement at position 25, in the nucleation domain, shifts the monomer/trimer equilibrium toward the monomer form. The increased monomer and lower trimer populations are reflected in the dramatic decrease in triple-helix content and stability. Unlike the Ala replacement at position 10, the Ala substitution in the (Gly-Pro-Hyp)(4) region can still be incorporated into a triple-helix, but at a greatly decreased rate of folding, since the original efficient nucleation site is no longer operative. The specific consequences of Gly to Ala replacements in two distinctive sequences in this triple-helical peptide may help clarify the variability in OI clinical severity resulting from mutations at different sites along type I collagen chains.     

Characterization of the nucleation step and folding of a collagen triple-helix peptide

Peptide T1-892 is a triple-helical peptide designed to include two distinct domains: a C-terminal (Gly-Pro-Hyp)(4) sequence, together with an N-terminal 18-residue sequence from the alpha1(I) chain of type I collagen. Folding experiments of T1-892 using CD spectroscopy were carried out at varying concentrations and temperatures, and fitting of kinetic models to the data was used to obtain information about the folding mechanism and to derive rate constants. Proposed models include a heterogeneous population of monomers with respect to cis-trans isomerization and a third-order folding reaction from competent monomer to the triple helix. Fitting results support a nucleation domain composed of all or most of the (Gly-Pro-Hyp)(4) sequence, which must be in trans form before the monomer is competent to initiate triple-helix formation. The folding of competent monomer to a triple helix is best described by an all-or-none third-order reaction. The temperature dependence of the third-order rate constant indicates a negative activation energy and provides information about the thermodynamics of the trimerization step. These CD studies complement NMR studies carried out on the same peptide at high concentrations, illustrating how the rate-limiting folding step is affected by changes in concentration. This sequence preference of repeating Gly-Pro-Hyp units for the initiation of triple-helix formation in peptide T1-892 may be related to features in the triple-helix folding of collagens.     

Site-specific NMR monitoring of cis-trans isomerization in the folding of the proline-rich collagen triple helix

Understanding the folding of the proline-rich collagen triple helix requires consideration of the effects of proline cis-trans isomerization and may shed light on the misfolding of collagen in connective tissue diseases. Folding was monitored in real time by heteronuclear 2D NMR spectroscopy for the (15)N labeled positions in the triple-helical peptide T1-892 [GPAGPAGPVGPAGARGPAGPOGPOGPOGPOGV]. In the equilibrium unfolded monomer form, each labeled residue showed multiple peaks with interconversion rates consistent with cis-trans isomerization of Gly-Pro and Pro-Hyp bonds. Real-time NMR studies on the folding of T1-892 showed slow decay of monomer peaks and a concomitant increase in trimer peaks. Gly25 in the C-terminal rich (Gly-Pro-Hyp)(4) domain folds first, consistent with its being a nucleation domain. Analysis of the kinetics indicates that the folding of Gly25 is biphasic and the slower step represents cis-trans isomerization of imino acids. This illustrates that nucleation is limited by cis-trans isomerization. Monitoring Gly6, Gly10, Ala12, and Gly13 monomer and trimer peaks captures the C- to N-terminal propagation of the triple helix, which is also limited by Gly-Pro cis-trans isomerization events. The zipper-like nature of the propagation process is confirmed by the slower rate of folding of Ala6 compared to Gly13, reflecting the larger number of isomerization events encountered by the more N-terminal Ala6. The cis-trans isomerization events at multiple proline residues is a complex statistical process which can be visualized by these NMR studies.     

Sequence dependence of the folding of collagen-like peptides. Single amino acids affect the rate of triple-helix nucleation

The refolding of thermally denatured model collagen-like peptides was studied for a set of 21 guest triplets embedded in a common host framework: acetyl-(Gly-Pro-Hyp)3-Gly-Xaa-Yaa-(Gly-Pro-Hyp)4-Gly-Gly-amide. The results show a strong dependence of the folding rate on the identity of the guest Gly-Xaa-Yaa triplet, with the half-times for refolding varying from 6 to 110 min (concentration = 1 mg/ml). All triplets of the form Gly-Xaa-Hyp promoted rapid folding, with the rate only marginally dependent on the residue in the Xaa position. In contrast, triplets of the form Gly-Pro-Yaa and Gly-Xaa-Yaa were slower and showed a wide range of half-times, varying with the identity of the residues in the triplet. At low concentrations, the folding can be described by third-order kinetics, suggesting nucleation is rate-limiting. Data on the relative nucleation ability of different Gly-Xaa-Yaa triplets support the favorable nature of imino acids, the importance of hydroxyproline, the varying effects of the same residue in the Xaa position versus the Yaa position, and the difficulties encountered when leucine or aspartic acid are in the Yaa position. Information on the relative propensities of different tripeptide sequences to promote nucleation of the triple-helix in peptides will aid in identification of nucleation sites in collagen sequences.     

Energetic coupling between native-state prolyl isomerization and conformational protein folding

In folded proteins, prolyl peptide bonds are usually thought to be either trans or cis because only one of the isomers can be accommodated in the native folded protein. For the N-terminal domain of the gene-3 protein of the filamentous phage fd (N2 domain), Pro161 resides at the tip of a beta hairpin and was found to be cis in the crystal structure of this protein. Here we show that Pro161 exists in both the cis and the trans conformations in the folded form of the N2 domain. We investigated how conformational folding and prolyl isomerization are coupled in the unfolding and refolding of N2 domain. A combination of single-mixing and double-mixing unfolding and refolding experiments showed that, in unfolded N2 domain, 7% of the molecules contain a cis-Pro161 and 93% of the molecules contain a trans-Pro161. During refolding, the fraction of molecules with a cis-Pro161 increases to 85%. This implies that 10.3 kJ mol(-1) of the folding free energy was used to drive this 75-fold change in the Pro161 cis/trans equilibrium constant during folding. The stabilities of the forms with the cis and the trans isomers of Pro161 and their folding kinetics could be determined separately because their conformational folding is much faster than the prolyl isomerization reactions in the native and the unfolded proteins. The energetic coupling between conformational folding and Pro161 isomerization is already fully established in the transition state of folding, and the two isomeric forms are thus truly native forms. The folding kinetics are well described by a four-species box model, in which the N2 molecules with either isomer of Pro161 can fold to the native state and in which cis/trans isomerization occurs in both the unfolded and the folded proteins.     

Osteogenesis Imperfecta Model Peptides: Incorporation of Residues Replacing Gly within a Triple Helix Achieved by Renucleation and Local Flexibility

Missense mutations, which replace one Gly with a larger residue in the repeating sequence of the type I collagen triple helix, lead to the hereditary bone disorder osteogenesis imperfecta (OI). Previous studies suggest that these mutations may interfere with triple-helix folding. NMR was used to investigate triple-helix formation in a series of model peptides where the residue replacing Gly, as well as the local sequence environment, was varied. NMR measurement of translational diffusion coefficients allowed the identification of partially folded species. When Gly was replaced by Ala, the Ala residue was incorporated into a fully folded triple helix, whereas replacement of Gly by Ser or Arg resulted in the presence of some partially folded species, suggesting a folding barrier. Increasing the triple-helix stability of the sequence N-terminal to a Gly-to-Ser replacement allowed complete triple-helix folding, whereas with the substitution of Arg, with its large side chain, the peptide achieved full folding only after flexible residues were introduced N-terminal to the mutation site. These studies shed light on the factors important for accommodation of Gly mutations within the triple helix and may relate to the varying severity of OI.     

Contribution of tertiary amides to the conformational stability of collagen triple helices

The collagen triple helix is composed of three polypeptide strands, each with a sequence of repeating (Xaa-Yaa-Gly) triplets. In these triplets, Xaa and Yaa are often tertiary amides: L-proline (Pro) and 4(R)-hydroxy-L-proline (Hyp). To determine the contribution of tertiary amides to triple-helical stability, Pro and Hyp were replaced in synthetic collagen mimics with a non-natural acyclic tertiary amide: N-methyl-L-alanine (meAla). Replacing a Pro or Hyp residue with meAla decreases triple-helical stability. Ramachandran analysis indicates that meAla residues prefer to adopt straight phi and psi angles that are dissimilar from those of the Pro and Hyp residues in the collagen triple helix. Replacement with meAla decreases triple-helical stability more than does replacement with Ala. All of the peptide bonds in triple-helical collagen are in the trans conformation. Although an Ala residue greatly prefers the trans conformation, a meAla residue exists as a nearly equimolar mixture of trans and cis conformers. These findings indicate that the favorable contribution of Pro and Hyp to the conformational stability of collagen triple helices arises from factors other than their being tertiary amides.     

Collagen model peptides: Sequence dependence of triple-helix stability

The triple helix is a specialized protein motif, found in all collagens as well as in noncollagenous proteins involved in host defense. Peptides will adopt a triple-helical conformation if the sequence contains its characteristic features of Gly as every third residue and a high content of Pro and Hyp residues. Such model peptides have proved amenable to structural studies by x-ray crystallography and NMR spectroscopy, suitable for thermodynamic and kinetic analysis, and a valuable tool in characterizing the binding activities of the collagen triple helix. A systematic approach to understanding the amino acid sequence dependence of the collagen triple helix has been initiated, based on a set of host-guest peptides of the form, (Gly-Pro-Hyp)(3)-Gly-X-Y-(Gly-Pro-Hyp)(4). Comparison of their thermal stabilities has led to a propensity scale for the X and Y positions, and the additivity of contributions of individual residues is now under investigation. The local and global stability of the collagen triple helix is normally modulated by the residues in the X and Y positions, with every third position occupied by Gly in fibril-forming collagens. However, in collagen diseases, such as osteogenesis imperfecta, a single Gly may be substituted by another residue. Host-guest studies where the Gly is replaced by various amino acids suggest that the identity of the residue in the Gly position affects the degree of destabilization and the clinical severity of the disease.     

Sweet is stable: glycosylation stabilizes collagen

For most collagens, the melting temperature (T(m)) of the triple-helical structure of collagen correlates with the total content of proline (Pro) and 4-trans-hydroxyproline (Hyp) in the Xaa and Yaa positions of the -Gly-Xaa-Yaa- triplet repeat. The cuticle collagen of the deep-sea hydrothermal vent worm Riftia pachyptila, despite a very low content of Pro and Hyp, has a relatively high thermal stability. Rather than Hyp occupying the Yaa position, as is normally found in mammalian collagens, this position is occupied by threonine (Thr) which is O-glycosylated. We compare the triple-helix forming propensities in water of two model peptides, Ac-(Gly-Pro-Thr)(10)-NH(2) and Ac-(Gly-Pro-Thr(Galbeta))(10)-NH(2), and show that a collagen triple-helix structure is only achieved after glycosylation of Thr. Thus, we show for the first time that glycosylation is required for the formation of a stable tertiary structure and that this modification represents an alternative way of stabilizing the collagen triple-helix that is independent of the presence of Hyp.     

Amino acid propensities for the collagen triple-helix

Determination of the tendencies of amino acids to form alpha-helical and beta-sheet structures has been important in clarifying stabilizing interactions, protein design, and the protein folding problem. In this study, we have determined for the first time a complete scale of amino acid propensities for another important protein motif: the collagen triple-helix conformation with its Gly-X-Y repeating sequence. Guest triplets of the form Gly-X-Hyp and Gly-Pro-Y are used to quantitate the conformational propensities of all 20 amino acids for the X and Y positions in the context of a (Gly-Pro-Hyp)(8) host peptide. The rankings for both the X and Y positions show the highly stabilizing nature of imino acids and the destabilizing effects of Gly and aromatic residues. Many residues show differing propensities in the X versus Y position, related to the nonequivalence of these positions in terms of interchain interactions and solvent exposure. The propensity of amino acids to adopt a polyproline II-like conformation plays a role in their triple-helix rankings, as shown by a moderate correlation of triple-helix propensity with frequency of occurrence in polyproline II-like regions. The high propensity of ionizable residues in the X position suggests the importance of interchain hydrogen bonding directly or through water to backbone carbonyls or hydroxyprolines. The low propensity of side chains with branching at the C(delta) in the Y position supports models suggesting these groups block solvent access to backbone C=O groups. These data provide a first step in defining sequence-dependent variations in local triple-helix stability and binding, and are important for a general understanding of side chain interactions in all proteins.     

Electrostatic interactions involving lysine make major contributions to collagen triple-helix stability

Important stabilizing features for the collagen triple helix include the presence of Gly as every third residue, a high content of imino acids, and interchain hydrogen bonds. Host-guest peptides have been used previously to characterize triple-helix propensities of individual residues and Gly-X-Y triplets. Here, comparison of the thermal stabilities of host-guest peptides of the form (Gly-Pro-Hyp)3-Gly-X-Y-Gly-X'-Y'-(Gly-Pro-Hyp)3 extends the study to adjacent tripeptide sequences, to encompass the major classes of potential direct intramolecular interactions. Favorable hydrophobic interactions were observed, as well as stabilizing intrachain interactions between residues of opposite charge in the i and i + 3 positions. However, the greatest gain in triple-helix stability was achieved in the presence of Gly-Pro-Lys-Gly-Asp/Glu-Hyp sequences, leading to a T(m) value equal to that seen for a Gly-Pro-Hyp-Gly-Pro-Hyp sequence. This stabilization is seen for Lys but not for Arg and can be assigned to interchain ion pairs, as shown by molecular modeling. Computational analysis shows that Lys-Gly-Asp/Glu sequences are present at a frequency much greater than expected in collagen, suggesting this interaction is biologically important. These results add significantly to the understanding of which surface ion pairs can contribute to protein stability.     

Location of glycine mutations within a bacterial collagen protein affects degree of disruption of triple-helix folding and conformation

The hereditary bone disorder osteogenesis imperfecta is often caused by missense mutations in type I collagen that change one Gly residue to a larger residue and that break the typical (Gly-Xaa-Yaa)(n) sequence pattern. Site-directed mutagenesis in a recombinant bacterial collagen system was used to explore the effects of the Gly mutation position and of the identity of the residue replacing Gly in a homogeneous collagen molecular population. Homotrimeric bacterial collagen proteins with a Gly-to-Arg or Gly-to-Ser replacement formed stable triple-helix molecules with a reproducible 2 °C decrease in stability. All Gly replacements led to a significant delay in triple-helix folding, but a more dramatic delay was observed when the mutation was located near the N terminus of the triple-helix domain. This highly disruptive mutation, close to the globular N-terminal trimerization domain where folding is initiated, is likely to interfere with triple-helix nucleation. A positional effect of mutations was also suggested by trypsin sensitivity for a Gly-to-Arg replacement close to the triple-helix N terminus but not for the same replacement near the center of the molecule. The significant impact of the location of a mutation on triple-helix folding and conformation could relate to the severe consequences of mutations located near the C terminus of type I and type III collagens, where trimerization occurs and triple-helix folding is initiated.     

Mechanism of stabilization of a bacterial collagen triple helix in the absence of hydroxyproline

The Streptococcus pyogenes cell-surface protein Scl2 contains a globular N-terminal domain and a collagen-like domain, (Gly-Xaa-X'aa)(79), which forms a triple helix with a thermal stability close to that seen for mammalian collagens. Hyp is a major contributor to triple-helix stability in animal collagens, but is not present in bacteria, which lack prolyl hydroxylase. To explore the basis of bacterial collagen triple-helix stability in the absence of Hyp, biophysical studies were carried out on recombinant Scl2 protein, the isolated collagen-like domain from Scl2, and a set of peptides modeling the Scl2 highly charged repetitive (Gly-Xaa-X'aa)(n) sequences. At pH 7, CD spectroscopy, dynamic light scattering, and differential scanning calorimetry of the Scl2 protein all showed a very sharp thermal transition near 36 degrees C, indicating a highly cooperative unfolding of both the globular and triple-helix domains. The collagen-like domain isolated by trypsin digestion showed a sharp transition at the same temperature, with an enthalpy of 12.5 kJ/mol of tripeptide. At low pH, Scl2 and its isolated collagen-like domain showed substantial destabilization from the neutral pH value, with two thermal transitions at 24 and 27 degrees C. A similar destabilization at low pH was seen for Scl2 charged model peptides, and the degree of destabilization was consistent with the strong pH dependence arising from the GKD tripeptide unit. The Scl2 protein contained twice as much charge as human fibril-forming collagens, and the degree of electrostatic stabilization observed for Scl2 was similar to the contribution Hyp makes to the stability of mammalian collagens. The high enthalpic contribution to the stability of the Scl2 collagenous domain supports the presence of a hydration network in the absence of Hyp.     

Triple-helical peptides: an approach to collagen conformation, stability, and self-association

Peptides have been an integral part of the collagen triple-helix structure story, and have continued to serve as useful models for biophysical studies and for establishing biologically important sequence-structure-function relationships. High resolution structures of triple-helical peptides have confirmed the basic Ramachandran triple-helix model and provided new insights into the hydration, hydrogen bonding, and sequence dependent helical parameters in collagen. The dependence of collagen triple-helix stability on the residues in its (Gly-X-Y)(n) repeating sequence has been investigated by measuring melting temperatures of host-guest peptides and an on-line collagen stability calculator is now available. Although the presence of Gly as every third residue is essential for an undistorted structure, interruptions in the repeating (Gly-X-Y)(n) amino acid sequence pattern are found in the triple-helical domains of all nonfibrillar collagens, and are likely to play a role in collagen binding and degradation. Peptide models indicate that small interruptions can be incorporated into a rod-like triple-helix with a highly localized effect, which perturbs hydrogen bonds and places the standard triple-helices on both ends out of register. In contrast to natural interruptions, missense mutations which replace one Gly in a triple-helix domain by a larger residue have pathological consequences, and studies on peptides containing such Gly substitutions clarify their effect on conformation, stability, and folding. Recent studies suggest peptides may also be useful in defining the basic principles of collagen self-association to the supramolecular structures found in tissues.     

The crystal structure of the collagen-like polypeptide (glycyl-4(R)-hydroxyprolyl-4(R)-hydroxyprolyl)9 at 1.55 A resolution shows up-puckering of the proline ring in the Xaa position

The collagen triple helix is characterized by the repeating sequence motif Gly-Xaa-Yaa, where Xaa and Yaa are typically proline and (2S,4R)-4-hydroxyproline (4(R)Hyp), respectively. Previous analyses have revealed that H-(Pro-4(R)Hyp-Gly)(10)-OH forms a stable triple helix, whereas H-(4(R)Hyp-Pro-Gly)(10)-OH does not. Several theories have been put forth to explain the importance of proline puckering and conformation in triple helix formation; however, the details of how they affect triple helix stability are unknown. Underscoring this, we recently demonstrated that the polypeptide Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) forms a triple helix that is more stable than Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2). Here we report crystal the structure of the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH peptide at 1.55 A resolution. The puckering of the Yaa position 4(R)Hyp in this structure is up (Cgamma exo), as has been found in other collagen peptide structures. Notably, however, the 4(R)Hyp in the Xaa position also takes the up pucker, which is distinct from all other collagen structures. Regardless of the notable difference in the Xaa proline puckering, our structure still adopts a 7/2 superhelical symmetry similar to that observed in other collagen structures. Thus, the basis for the observed differences in the thermodynamic data of the triple helix<--> coil transition between our peptide and other triple helical peptides likely results from contributions from the unfolded state. Indeed, the unfolded state of the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH peptide seems to be stabilized by a preformed polyproline II helix in each strand, which could be explained by the presence of a unique repeating intra-strand water-mediated bridge observed in the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH structure, as well as a higher amount of trans peptide bonds.     

UV damage of collagen: insights from model collagen peptides

Fibrils of Type I collagen in the skin are exposed to ultraviolet (UV) light and there have been claims that collagen photo-degradation leads to wrinkles and may contribute to skin cancers. To understand the effects of UV radiation on collagen, Type I collagen solutions were exposed to the UV-C wavelength of 254 nm for defined lengths of time at 4°C. Circular dichroism (CD) experiments show that irradiation of collagen leads to high loss of triple helical content with a new lower thermal stability peak and SDS-gel electrophoresis indicates breakdown of collagen chains. To better define the effects of UV radiation on the collagen triple-helix, the studies were extended to peptides which model the collagen sequence and conformation. CD studies showed irradiation for days led to lower magnitudes of the triple-helix maximum at 225 nm and lower thermal stabilities for two peptides containing multiple Gly-Pro-Hyp triplets. In contrast, the highest radiation exposure led to little change in the T(m) values of (Gly-Pro-Pro)(10) and (Ala-Hyp-Gly)(10) , although (Gly-Pro-Pro)(10) did show a significant decrease in triple helix intensity. Mass spectroscopy indicated preferential cleavage sites within the peptides, and identification of some of the most susceptible sites of cleavage. The effect of radiation on these well defined peptides gives insight into the sequence and conformational specificity of photo-degradation of collagen.     

Heterotrimeric collagen peptides containing functional epitopes. Synthesis of single‐stranded collagen type I peptides related to the collagenase cleavage site

Synthetic collagen peptides containing larger numbers of Gly‐Pro‐Hyp repeats are difficult to purify by standard chromatographic procedures. Therefore, efficient strategies are required for the synthesis of higher molecular weight collagen‐type peptides. Applying the Fmoc/tBu chemistry, a comparative analysis of the standard stepwise chain elongation procedure on solid support with the procedure based on the use of the synthons Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH and Fmoc‐Pro‐Hyp‐Gly‐OH was performed. The crude products resulting from the stepwise elongation procedure and from the use of Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH clearly revealed large amounts of microheterogeneities that result from incomplete imino acid acylation as well as from diketopiperazine formation with cleavage of Gly‐Pro units from the growing peptide chain. Conversely, by the use of the Fmoc‐Pro‐Hyp‐Gly‐OH synthon, the quality of the crude products was significantly improved; moreover, protection of the Hyp side chain hydroxyl function is not required using the Fmoc/tBu strategy. With this optimized synthetic procedure, relatively large collagen‐type peptides were obtained in satisfactory yields as highly homogeneous compounds. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of heterotrimeric collagen models containing Arg residues in Y-positions and analysis of their conformational stability

An Arg residue incorporated into the Y-position of collagenous host-guest peptide Ac-(Gly-Pro-Hyp)(3)-Gly-Pro-Y-(Gly-Pro-Hyp)(4)-Gly-Gly-NH(2) is reported to stabilize the triple helical structure as well as a 4(R)-hydroxyproline (Hyp) residue. Here, we synthesized heterotrimeric collagen models containing Arg in Y-positions utilizing the cystine knot strategy. Analysis of their thermal transition temperatures using circular dichroism spectrometry demonstrated unexpected decrease in the triple helical stability as the number of Arg increased. The obtained results indicated that an Arg residue in a Y-position is not always an equivalent of a Hyp residue, and that it possesses a potential helix destabilizing effect.     

Transformation of the mechanism of triple-helix peptide folding in the absence of a C-terminal nucleation domain and its implications for mutations in collagen disorders

Folding abnormalities of the triple helix have been demonstrated in collagen diseases such as osteogenesis imperfecta in which the mutation leads to the substitution of a single Gly in the (Gly-X-Y)n sequence pattern by a larger residue. Model peptides can be used to clarify the details of normal collagen folding and the consequences of the interruption of that folding by a Gly substitution. NMR and CD studies show that placement of a (GPO)4 nucleation domain at the N terminus rather than the C terminus of a native collagen sequence allows the formation of a stable triple helix but alters the folding mechanism. Although C- to N-terminal directional folding occurs when the nucleation domain is at the C terminus, there is no preferential folding direction when the nucleation domain is at the N terminus. The lack of zipper-like directional folding does not interfere with triple-helix formation, and when a Gly residue is replaced by Ser to model an osteogenesis imperfecta mutation, the peptide with the N-terminal (GPO)4 domain can still form a good triple helix N-terminal to the mutation site. These peptide studies raise the possibility that mutant collagen could fold in a C to N direction in a zipper-like manner up to the mutation site and that completion of the triple helix N-terminal to the mutation would involve an alternative mechanism.     

Substrate specificity of beta-collagenase from Clostridium histolyticum

The substrate specificity of beta-collagenase from Clostridium histolyticum has been investigated by measuring the rate of hydrolysis of more than 50 tri-, tetra-, penta-, and hexapeptides covering the P3 to P3' subsites of the substrate. The choice of peptides was patterned after sequences found in the alpha 1 and alpha 2 chains of type I collagen. Each peptide contained either a 2-furanacryloyl (FA) or cinnamoyl (CN) group in subsite P2 or the 4-nitrophenylalanine (Nph) residue in subsite P1. Hydrolysis of the P1-P1' bond produces an absorbance change in these chromophoric peptides that has been used to quantitate the rates of their hydrolysis under first order conditions ([S] much less than KM) from kcat/KM values have been obtained. The identity of the amino acids in all six subsites (P3-P3') markedly influences the hydrolysis rates. In general, the best substrates have Gly in subsites P3 and P1', Pro or Ala in subsite P2', and Hyp, Arg, or Ala in subsite P3'. This corresponds well with the frequency of occurrence of these residues in the Gly-X-Y triplets of collagen. In contrast, the most rapidly hydrolyzed substrates do not have residues from collagen-like sequences in subsites P2 and P1. For example, CN-Nph-Gly-Pro-Ala is the best known substrate for beta-collagenase with a kcat/KM value of 4.4 X 10(7) M-1 min-1, in spite of the fact that there is neither Pro nor Ala in P2 or Hyp nor Ala in P1. These results indicate that the previously established rules for the substrate specificity of the enzyme require modification.