Characterization of an extracellular lipase and its chaperone from Ralstonia eutropha H16

Lipase enzymes catalyze the reversible hydrolysis of triacylglycerol to fatty acids and glycerol at the lipid–water interface. The metabolically versatile Ralstonia eutropha strain H16 is capable of utilizing various molecules containing long carbon chains such as plant oil, organic acids, or Tween as its sole carbon source for growth. Global gene expression analysis revealed an upregulation of two putative lipase genes during growth on trioleate. Through analysis of growth and activity using strains with gene deletions and complementations, the extracellular lipase (encoded by the lipA gene, locus tag H16_A1322) and lipase-specific chaperone (encoded by the lipB gene, locus tag H16_A1323) produced by R. eutropha H16 was identified. Increase in gene dosage of lipA not only resulted in an increase of the extracellular lipase activity, but also reduced the lag phase during growth on palm oil. LipA is a non-specific lipase that can completely hydrolyze triacylglycerol into its corresponding free fatty acids and glycerol. Although LipA is active over a temperature range from 10 °C to 70 °C, it exhibited optimal activity at 50 °C. While R. eutropha H16 prefers a growth pH of 6.8, its extracellular lipase LipA is most active between pH 7 and 8. Cofactors are not required for lipase activity; however, EDTA and EGTA inhibited LipA activity by 83 %. Metal ions Mg²⁺, Ca²⁺, and Mn²⁺ were found to stimulate LipA activity and relieve chelator inhibition. Certain detergents are found to improve solubility of the lipid substrate or increase lipase-lipid aggregation, as a result SDS and Triton X-100 were able to increase lipase activity by 20 % to 500 %. R. eutropha extracellular LipA activity can be hyper-increased, making the overexpression strain a potential candidate for commercial lipase production or in fermentations using plant oils as the sole carbon source.     

Co-expression of the lipase and foldase of Pseudomonas aeruginosa to a functional lipase in Escherichia coli

The lipA gene, a structural gene encoding for protein of molecular mass 48 kDa, and lipB gene, encoding for a lipase-specific chaperone with molecular mass of 35 kDa, of Pseudomonas aeruginosa B2264 were co-expressed in heterologous host Escherichia coli BL21 (DE3) to obtain in vivo expression of functional lipase. The recombinant lipase was expressed with histidine tag at its N terminus and was purified to homogeneity using nickel affinity chromatography. The amino acid sequence of LipA and LipB of P. aeruginosa B2264 was 99–100% identical with the corresponding sequence of LipA and LipB of P. aeruginosa LST-03 and P. aeruginosa PA01, but it has less identity with Pseudomonas cepacia (Burkholderia cepacia) as it showed only 37.6% and 23.3% identity with the B. cepacia LipA and LipB sequence, respectively. The molecular mass of the recombinant lipase was found to be 48 kDa. The recombinant lipase exhibited optimal activity at pH 8.0 and 37°C, though it was active between pH 5.0 and pH 9.0 and up to 45°C. K _m and V _max values for recombinant P. aeruginosa lipase were found to be 151.5 ± 29 μM and 217 ± 22.5 μmol min⁻¹ mg⁻¹ protein, respectively.     

Gene Cloning and Characterization of a Novel Highly Organic Solvent Tolerant Lipase from Proteus sp. SW1 and its Application for Biodiesel Production

Proteus sp. SW1 was found to produce an extracellular solvent tolerant lipase. The gene, lipA, encoding a bacterial lipase, was cloned from total Proteus sp. SW1 DNA. lipA was predicted to encode a 287 amino acid protein of 31.2?kDa belonging to the Group I proteobacterial lipases. Purified His-tagged LipA exhibited optimal activity at pH 10.0 and 55??C. It was highly stable in organic solvents retaining 112% of its activity in 100% isopropanol after 24?h, and exhibited more than 200% of its initial activity upon exposure to 60% acetone, ethanol, and hexane for 18?h. Biodiesel synthesis reactions, using a single step addition of 13% an acyl acceptor ethanol, showed that LipA was highly effective at converting palm oil into biodiesel.     

A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

A novel lipase/chaperone pair from<Emphasis Type="Italic"> Ralstonia</Emphasis> sp. M1: analysis of the folding interaction and evidence for gene loss in<Emphasis Type="Italic"> R. solanacearum</Emphasis>

A microbial strain (referred to as M1) that produces an extracellular lipase was isolated from a soil sample in Vietnam, and identified as a Ralstonia species by partial sequencing of its 16S rDNA. A genomic library was constructed from Pst I fragments, and a colony showing lipase activity was selected for further analysis. Sequencing of the 4.7-kb insert in this clone (named M1-72) revealed one incomplete and three complete ORFs, predicted to encode a partial hypothetical glutaminyl tRNA synthetase (304 aa), a hypothetical transmembrane protein (500 aa), a lipase (328 aa) and a lipase chaperone (352 aa), respectively. Alignment of the insert sequence with the corresponding region of the genome of R. solanacearum GMI1000 (GenBank Accession No. AL646081) confirmed the presence in the latter of the genes for the hypothetical transmembrane protein and glutaminyl tRNA synthetase, which exhibited 89–91% identity to their counterparts in M1. However, R. solanacearum GMI1000 lacks the complete lipase-encoding gene and the major part of the chaperone-encoding gene, creating a so-called black hole. The deduced amino acid sequences of the products of the lipase gene lipA and chaperone gene lipB from strain M1 shared 49.3–60.3% and 23.9–32.7% identity, respectively, with those of the Burkholderia lipase/chaperone subfamily I.2. lipB is located downstream of lipA, and separated from it by only 9 bp, and each gene has a putative ribosome binding site. The mature lipase LipA, a His-tagged derivative (LipAhis), the tagged full-length chaperone LipBhis and a truncated form (LipBhis) lacking the 56 N-terminal residues were expressed in Escherichia coli BL21. LipA, LipAhis and LipBhis could be expressed at high levels (70, 15 and 12 mg/g wet cells, respectively) and were easily purified. However, LipBhis was expressed at a much lower level which precluded purification. The specific activity of purified LipAhis, expressed on its own, was very low (<52 U/mg). However, after co-incubation with the purified LipBhis in vitro, the specific activity of the enzyme was markedly enhanced, indicating that the chaperone facilitated correct folding of the enzyme. A lipase:chaperone ratio of 1:10 was found to be optimal, yielding an enzyme preparation with a specific activity of 650 U/mg.Communicated by H. Ikeda     

Homologous expression,purification and characterization of a novel high-alkaline and thermal stable lipase from Burkholderia cepacia ATCC 25416

The lipase secreted by Burkholderia cepacia ATCC 25416 was particularly attractive in detergent and leather industry due to its specific characteristics of high alkaline and thermal stability. The lipase gene (lipA), lipase chaperone gene (lipB), and native promoter upstream of lipA were cloned. The lipA was composed of 1095 bp, corresponding to 364 amino acid residues. The lipB located immediately downstream of lipA was composed of 1035 bp, corresponding to 344 amino acid residues. The lipase operon was inserted into broad host vector pBBRMCS1 and electroporated into original strain. The homologous expression of recombinant strain showed a significant increase in the lipase activity. LipA was purified by three-step procedure of ammonium sulfate precipitation, phenyl-sepharose FF and DEAE-sepharose FF. SDS-PAGE showed the molecular mass of the lipase was 33 kDa. The enzyme optimal temperature and pH were 60 °C and 11.0, respectively. The enzyme was stable at 30–70 °C. After incubated in 70 °C for 1 h, enzyme remained 72% of its maximal activity. The enzyme exhibited a good stability at pH 9.0–11.5. The lipase preferentially hydrolyzed medium-chain fatty acid esters. The enzyme was strongly activated by Mg²⁺, Ca²⁺, Cu²⁺, Zn²⁺, Co²⁺, and apparently inhibited by PMSF, EDTA and also DTT with SDS. The enzyme was compatible with various ionic and non-ionic surfactants as well as oxidant H₂O₂. The enzyme had good stability in the low- and non-polar solvents.     

The Putative Lipase,AF1763, from <Emphasis Type="Italic">Archaeoglobus fulgidus</Emphasis>is a Carboxylesterase with a Very High pH Optimum

The open reading frame AF1763, annotated as a putative lipase gene (lipA) of the hyperthermophilic archaeon, Archaeoglobus fulgidus DSM 4304, was cloned and over-expressed in E. coli. A sequence analysis of LipA and the investigation of a truncated enzyme implied a special function of the C-terminal part of LipA. The substrate spectrum of the enzyme suggested that LipA is a carboxylesterase rather than a canonical lipase. The enzyme showed optimal activity at 70 °C and between pH 10 and 11, which is among the most alkaline pH range detected for hydrolases.     

Cloning,characterization and expression of the extracellular lipase gene from <Emphasis Type="Italic">Aureobasidium </Emphasis><Emphasis Type="Italic">pullulans</Emphasis> HN2-3 isolated from sea saltern

The extracellular lipase structural gene was isolated from cDNA of Aureobasidium pullulans HN2-3 by using SMART^TM RACE cDNA amplification kit. The gene had an open reading frame of 1245 bp long encoding a lipase. The coding region of the gene was interrupted by only one intron (55 bp). It encodes 414 amino acid residues of a protein with a putative signal peptide of 26 amino acids. The protein sequence deduced from the extracellular lipase structural gene contained the lipase consensus sequence (G-X-S-X-G) and three conserved putative N-glycosylation sites. According to the phylogenetic tree of the lipases, the lipase from A. pullulans was closely related to that from Aspergillus fumigatus (XP_750543) and Neosartorya fischeri (XP_001257768) and the identities were 50% and 52%, respectively. The mature peptide encoding cDNA was subcloned into pET-24a (+) expression vector. The recombinant plasmid was expressed in Escherichia coli BL21(DE3). The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 47 kDa was found. Enzyme activity assay verified the recombinant protein as a lipase. A maximum activity of 0.96 U/mg was obtained from cellular extract of E. coli BL21(DE3) harboring pET-24a(+)LIP1. Optimal pH and temperature of the crude recombinant lipase were 8.0 and 35 °C, respectively and the crude recombinant lipase had the highest hydrolytic activity towards peanut oil.     

A new alkaline lipase obtained from the metagenome of marine sponge <Emphasis Type="Italic">Ircinia</Emphasis> sp.

Microorganisms associated with marine sponges are potential resources for marine enzymes. In this study, culture-independent metagenomic approach was used to isolate lipases from the complex microbiome of the sponge Ircinia sp. obtained from the South China Sea. A metagenomic library was constructed, containing 6568 clones, and functional screening on 1 % tributyrin agar resulted in the identification of a positive lipase clone (35F4). Following sequence analysis 35F4 clone was found to contain a putative lipase gene lipA. Sequence analysis of the predicted amino acid sequence of LipA revealed that it is a member of subfamily I.1 of lipases, with 63 % amino acid similarity to the lactonizing lipase from Aeromonas veronii (WP_021231793). Based on the predicted secondary structure, LipA was predicted to be an alkaline enzyme by sequence/structure analysis. Heterologous expression of lipA in E. coli BL21 (DE3) was performed and the characterization of the recombinant enzyme LipA showed that it is an alkaline enzyme with high tolerance to organic solvents. The isolated lipase LipA was active in the broad alkaline range, with the highest activity at pH 9.0, and had a high level of stability over a pH range of 7.0–12.0. The activity of LipA was increased in the presence of 5 mM Ca²⁺ and some organic solvents, e.g. methanol, acetone and isopropanol. The optimum temperature for the activity of LipA is 40 °C and the molecular weight of LipA was determined to be ~30 kDa by SDS-PAGE. LipA is an alkaline lipase and shows good tolerance to some organic solvents, which make it of potential utility in the detergent industry and enzyme mediated organic synthesis. The result of this study has broadened the diversity of known lipolytic genes and demonstrated that marine sponges are an important source for new enzymes.     

Chaperone-mediated activation in vivo of a Pseudomonas cepacia lipase

An extracellular Pseudomonas cepacia lipase, LipA, is inactive when expressed in the absence of the product of the limA gene. Evidence has been presented that LimA is a molecular chaperone. The lipA and limA genes have been cloned in separate and independently inducible expression systems in Escherichia coli. These systems were used to test the molecular chaperone hypothesis by investigating whether LimA could activate presynthesized prelipase and whether presynthesized LimA could activate newly synthesized prelipase. The results show that LimA cannot activate presynthesized prelipase and that presynthesized LimA can activate only a limited number of de novo synthesized prelipase molecules. Co-immunoprecipitation of prelipase/lipase with LimA generated a 1:1 complex of prelipase/lipase and LimA. The results suggest that a 1:1 complex of LipA and LimA is required for prelipase processing and secretion of active lipase.     

Development of a Lipase Fermentation Process That Uses a Recombinant Pseudomonas alcaligenes Strain

Pseudomonas alcaligenes M-1 secretes an alkaline lipase, which has excellent characteristics for the removal of fatty stains under modern washing conditions. A fed-batch fermentation process based on the secretion of the alkaline lipase from P. alcaligenes was developed. Due to the inability of P. alcaligenes to grow on glucose, citric acid and soybean oil were applied as substrates in the batch phase and feed phase, respectively. The gene encoding the high-alkaline lipase from P. alcaligenes was isolated and characterized. Amplification of lipase gene copies in P. alcaligenes with the aid of low- and high-copy-number plasmids resulted in an increase of lipase expression that was apparently colinear with the gene copy number. It was found that overexpression of the lipase helper gene, lipB, produced a stimulating effect in strains with high copy numbers (>20) of the lipase structural gene, lipA. In strains with lipA on a low-copy-number vector, the lipB gene did not show any effect, suggesting that LipB is required in a low ratio to LipA only. During scaling up of the fermentation process to 100 m³, severe losses in lipase productivity were observed. Simulations have identified an increased level of dissolved carbon dioxide as the most probable cause for the scale-up losses. A large-scale fermentation protocol with a reduced dissolved carbon dioxide concentration resulted in a substantial elimination of the scale-up loss.     

Purification, characterization, and molecular cloning of organic-solvent-tolerant cholesterol esterase from cyclohexane-tolerant Burkholderia cepacia strain ST-200

Extracellular cholesterol esterase of Burkholderia cepacia strain ST-200 was purified from the culture supernatant. Its molecular mass was 37 kDa. The enzyme was stable at pH 5.5–12 and active at pH 5.5–6, showing optimal activity at pH 7.0 at 45°C. Relative to the commercially available cholesterol esterases, the purified enzyme was highly stable in the presence of various water-miscible organic solvents. The enzyme preferentially hydrolyzed long-chain fatty acid esters of cholesterol, except for that of cholesteryl palmitate. The enzyme exhibited lipolytic activity toward various p-nitrophenyl esters. The hydrolysis rate of p-nitrophenyl caprylate was enhanced 3.5- to 7.2-fold in the presence of 5–20% (vol/vol) water-miscible organic solvents relative to that in the absence of organic solvents. The structural gene encoding the cholesterol esterase was cloned and sequenced. The primary translation product was predicted to be 365 amino acid residues. The mature product is composed of 325 amino acid residues. The amino acid sequence of the product showed the highest similarity to the lipase LipA (87%) from B. cepacia DSM3959.     

Cloning of a novel lipase gene, <Emphasis Type="Italic">lipJ08,</Emphasis> from <Emphasis Type="Italic">Candida rugosa</Emphasis> and expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by codon optimization

A novel lipase gene, lipJ08, was cloned from Candida rugosa ATCC14830, along with the already reported five lipase genes (lip1–lip5). Nucleotide sequencing indicated that the lipJ08 gene contains a 1650 bp open reading frame (ORF) without introns. The deduced amino acid sequence corresponds to 534 amino acid residues, including a putative signal sequence of 15 amino acid residues. Seventeen of the non-universal serine codons (CTG) of lipJ08 were converted into universal serine codons (TCT) by PCR-based mutagenesis. The native and codon-optimized lipJ08 genes were expressed in Pichia pastoris. The hydrolytic activity of the recombinant LIPJ08 was 4.7 U/ml, whereas the activity of the recombinant wild-type lipase could not be detected.     

Cloning,expression and characterization of a new lipase from <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Bioinformatic analysis of the Yarrowia lipolytica CLIB122 genome has revealed 18 putative lipase genes all of which were expressed in Escherichia coli and screened for hydrolyzing activities against p-nitrophenyl-palmitate. One positive transformant containing an ORF of 1,098 bp encoding a protein of 365 amino acids was obtained. To characterize its enzymatic properties, the lipase gene was functionally expressed in Pichia pastoris. The resulting lipase exhibited the highest activity towards p-NP-decanoate at pH 7 and 35°C. In addition, the new lipase had a lower optimal temperature and pH compared to other Y. lipolytica lipases. It was noticeably enhanced by Ca²⁺, but was inhibited by PMSF, Hg²⁺ and Ni²⁺. The new lipase displayed the 1,3-specificity for triolein.     

An acid and highly thermostable xylanase from <Emphasis Type="Italic">Phialophora</Emphasis> sp. G5

An endo-β-1,4-xylanase gene, designated xyn10G5, was cloned from Phialophora sp. G5 and expressed in Pichia pastoris. The 1,197-bp full-length gene encodes a polypeptide of 399 amino acids consisting of a putative signal peptide at residues 1–20, a family 10 glycoside hydrolase domain, a short Gly/Thr-rich linker and a family 1 carbohydrate-binding module (CBM). The deduced amino acid sequence of XYN10G5 shares the highest identity (53.4%) with a putative xylanase precursor from Aspergillus terreus NIH2624. The purified recombinant XYN10G5 exhibited the optimal activity at pH 4.0 and 70 °C, remained stable at pH 3.0–9.0 (>70% of the maximal activity), and was highly thermostable at 70 °C (retaining ~90% of the initial activity for 1 h). Substrate specificity studies have shown that XYN10G5 had the highest activity on soluble wheat arabinoxylan (350.6 U mg⁻¹), and moderate activity to various heteroxylans, and low activity on different types of cellulosic substrates. Under simulated gastric conditions, XYN10G5 was stable and released more reducing sugars from soluble wheat arabinoxylan; when combined with a glucanase (CelA4), the viscosity of barley–soybean feed was significantly reduced. These favorable enzymatic properties make XYN10G5 a good candidate for application in the animal feed industry.     

<Emphasis Type="Italic">Bacillus deserti</Emphasis> sp. nov., a novel bacterium isolated from the desert of Xinjiang,China

A Gram-positive, rod-shaped, motile and spore-forming bacterium, designated ZLD-8^T, was isolated from a desert soil sample collected from Xinjiang Province in north-west China, and subjected to a polyphasic taxonomic analysis. This isolate grew optimally at 30°C and pH 7.0. It grew with 0–4% NaCl (optimum, 0–1%). Comparative 16S rRNA gene sequence analysis showed that strain ZLD-8^T was closely related to members of the genus Bacillus, exhibiting the highest 16S rRNA gene sequence similarity to Bacillus kribbensis DSM 17871^T (98.0%). The levels of 16S rRNA gene sequence similarity with respect to other Bacillus species with validly published names were less than 96.3%. The DNA G + C content of strain ZLD-8^T was 40.1 mol%. The strain contained MK-7 as the predominant menaquinone. The diagnostic diamino acid in the cell-wall peptidoglycan was meso-diaminopimelic acid. The major polar lipids were diphosphatidylglycerol, phosphatidylglycerol and phosphatidylethanolamine. The major fatty acids (>5% of total fatty acids) were anteiso-C15:0 (39.56%), iso-C14:0 (25.69%), C16:1 ω7c alcohol (10.13%) and iso-C15:0 (5.27%). These chemotaxonomic results supported the affiliation of strain ZLD-8^T to the genus Bacillus. However, low DNA–DNA relatedness values and distinguishing phenotypic characteristics allowed genotypic and phenotypic differentiation of strain ZLD-8^T from recognized Bacillus species. On the basis of the polyphasic evidence presented, strain ZLD-8^T is considered to represent a novel species of the genus Bacillus, for which the name Bacillus deserti sp. nov. is proposed. The type strain is ZLD-8^T (=CCTCC AB 207173^T = KCTC 13246^T).     

Chaperone-mediated activation in vivo of a Pseudomonas cepacia lipase

An extracellular Pseudomonas cepacia lipase, LipA, is inactive when expressed in the absence of the product of the limA gene. Evidence has been presented that LimA is a molecular chaperone. The lipA and limA genes have been cloned in separate and independently inducible expression systems in Escherichia coli. These systems were used to test the molecular chaperone hypothesis by investigating whether LimA could activate presynthesized prelipase and whether presynthesized LimA could activate newly synthesized prelipase. The results show that LimA cannot activate presynthesized prelipase and that presynthesized LimA can activate only a limited number of de novo synthesized prelipase molecules. Co-immunoprecipitation of prelipase/lipase with LimA generated a 1:1 complex of prelipase/lipase and LimA. The results suggest that a 1:1 complex of LipA and LimA is required for prelipase processing and secretion of active lipase.     

Cloning, purification, and characterization of chitosanase from Bacillus sp. DAU101

A chitosanase-producing Bacillus sp. DAU101 was isolated from Korean traditional food. This strain was identified on the basis of phylogenetic analysis of the 16S rDNA sequence, gyrA gene, and phenotypic analysis. The gene encoding chitosanase (csn) was cloned and sequenced. The csn gene consisted of an open reading frame of 837 nucleotides and encodes 279 amino acids with a deduced molecular weight of 31,420 Da. The deduced amino acid sequence of the chitosanase from Bacillus sp. DAU101 exhibits 88 and 30 % similarity to those from Bacillus subtilis and Pseudomonas sp., respectively. The chitosanase was purified by glutathione S-transferase fusion purification system. The molecular weight of purified enzyme was about 27 kDa, which suggests the deletion of a signal peptide by sodium dodecyl sulfate–polyacrylamide gel electrophoresis. The pH and temperature optima of the enzyme were 7.5 and 50 °C, respectively. The enzyme activity was increased by about 1.6-fold by the addition of 5 or 10 mM Ca²⁺. However, Hg²⁺ and Ni⁺ ions strongly inhibited the enzyme. The enzyme produced, GlcN_2–4, were the major products from a soluble chitosan.     

<Emphasis Type="Italic">Geobacillus zalihae</Emphasis> sp. nov., a thermophilic lipolytic bacterium isolated from palm oil mill effluent in Malaysia

Background  

Thermophilic Bacillus strains of phylogenetic Bacillus rRNA group 5 were described as a new genus Geobacillus. Their geographical distribution included oilfields, hay compost, hydrothermal vent or soils. The members from the genus Geobacillus have a growth temperatures ranging from 35 to 78°C and contained iso-branched saturated fatty acids (iso-15:0, iso-16:0 and iso-17:0) as the major fatty acids. The members of Geobacillus have similarity in their 16S rRNA gene sequences (96.5–99.2%). Thermophiles harboring intrinsically stable enzymes are suitable for industrial applications. The quest for intrinsically thermostable lipases from thermophiles is a prominent task due to the laborious processes via genetic modification.     

Engineering of <Emphasis Type="Italic">Bacillus</Emphasis> lipase by directed evolution for enhanced thermal stability: effect of isoleucine to threonine mutation at protein surface

A lip gene from a Bacillus isolate was cloned and expressed in E. coli. By thermal denaturation analysis, T_1/2 of lipase was observed to be 7 min at 50°C with less than 10% activity after 1 h incubation at 50°C. To expand the functionality of cloned lipase, attempts have been made to create thermostable variants of lip gene. A lipase variant with an isoleucine to threonine amino acid substitution at the protein surface was isolated that demonstrated higher thermostability than its wild type predecessor. To explore the structure–function relationship, the lip gene product of wild type (WT) and mutant was characterized in detail. The mutation enhanced the specific activity of enzyme by 2-folds when compared with WT. The mutant enzyme showed enhanced T_1/2 of 21 min at 50°C. The kinetic parameters of the mutant enzyme were significantly altered. The mutant enzyme displayed higher affinity for substrate (decreased K _m ) in comparison to the wild type. The k _cat and catalytic efficiency (k _cat/K _m ) of mutant were also enhanced by two and five times, respectively, as compared with the WT. The mutation resides on the part of helix which is exposed to the solvent and away from the catalytic triad. The replacement of a solvent exposed hydrophobic residue (Ile) in WT with a hydrophilic residue (Thr) in mutant might impart thermostability to the protein structure.