Characterization of a Bifidobacterium longum BORI dipeptidase belonging to the U34 family

A dipeptidase was purified from a cell extract of Bifidobacterium longum BORI by ammonium sulfate precipitation and chromatography on DEAE-cellulose and Q-Sepharose columns. The purified dipeptidase had a molecular mass of about 49 kDa and was optimally active at pH 8.0 and 50 degrees C. The enzyme was a strict dipeptidase, being capable of hydrolyzing a range of dipeptides but not tri- and tetrapeptides, p-nitroanilide derivatives of amino acids, or N- or C-terminus-blocked dipeptides. A search of the amino acid sequence of an internal tryptic fragment against protein sequences deduced from the total genome sequence of B. longum NCC2705 revealed that it was identical to an internal sequence of the dipeptidase gene (pepD), which comprised 1,602 nucleotides encoding 533 amino acids with a molecular mass of 60 kDa, and thereby differed considerably from the 49-kDa mass of the purified dipeptidase. To understand this discrepancy, pepD was cloned into an Escherichia coli expression vector (pBAD-TOPO derivative) to generate the recombinant plasmids pBAD-pepD and pBAD-pepD-His (note that His in the plasmid designation stands for a polyhistidine coding region). Both plasmids were successfully expressed in E. coli, and the recombinant protein PepD-His was purified using nickel-chelating affinity chromatography and reconfirmed by internal amino acid sequencing. The PepD sequence was highly homologous to those of the U34 family of peptidases, suggesting that the B. longum BORI dipeptidase is a type of cysteine-type N-terminal nucleophile hydrolase and has a beta-hairpin motif similar to that of penicillin V acylase, which is activated by autoproteolytic processing.     

Isolation and characterization of a novel cyanophycin synthetase from a deep-sea sediment metagenomic library

Cyanophycin is non-ribosomally synthesized protein-like copolymer. Synthesis of cyanophycin is catalyzed by cyanophycin synthetase (CphA). In this study, a novel cyanophycin synthetase CphA49 belonging to NOR5 clade of Gammaproteobacteria was identified with primer-based screening from a deep-sea sediment metagenomic library. The cphA49 gene contained an open reading frame of 2,637 bp and encoded a protein with a predicted molecular mass of 100 kDa. A recombinant CphA49 was obtained by the functional expression of cphA49 in Escherichia coli BL21 (DE3). The biochemical properties of the purified CphA49 were determined. The optimum pH and temperature of the recombinant CphA49 were 9.0 and 40 °C, respectively. The enzyme was stable at temperatures below 40 °C. The recombinant CphA49 exhibited strict primer dependency and broad substrate specificities. Cyanophycin catalyzed by CphA49 exhibited homogenous molecular mass. The amino acid composition of cyanophycin was determined and constitutes arginine, aspartic acid, and lysine.     

Cloning, Sequencing, and Characterization of a Heat- and Alkali-Stable Type I Pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70°C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg′). The N-terminal sequence of purified rPulAg′ was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg′ were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, β-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg′ was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Biochemical and molecular characterization of PepR, a dipeptidase, from Lactobacillus helveticus CNRZ32.

A dipeptidase with prolinase activity from Lactobacillus helveticus CNRZ32, which was designated PepR, was purified to gel electrophoretic homogeneity and characterized. The NH2-terminal amino acid sequence of the purified protein had 96% identity to the deduced NH2-terminal amino acid sequence of the pepR gene, which was previously designated pepPN, from L. helveticus CNRZ32. The purified enzyme hydrolyzed Pro-Met, Thr-Leu, and Ser-Phe as well as dipeptides containing neutral, nonpolar amino acid residues at the amino terminus. Purified PepR was determined to have a molecular mass of 125 kDa with subunits of 33 kDa. The isoelectric point of the enzyme was determined to be 4.5. The optimal reaction conditions, as determined with Pro-Leu as substrate, were pH 6.0 to 6.5 and 45 to 50 degrees C. The purified PepR had a Km of 4.9 to 5.2 mM and a Vmax of 260 to 270 mumol of protein per min/mg at pH 6.5 and 37 degrees C. The activity of purified PepR was inhibited by Zn2+ but not by other cations or cysteine, serine, aspartic, or metal-containing protease inhibitors or reducing agents. Results obtained by site-directed mutagenesis indicated that PepR is a serine-dependent protease. Gene replacement was employed to construct a PepR-deficient derivative of CNRZ32. This mutant did not differ from the wild-type strain in its ability to acidify milk. However, the PepR-deficient construct was determined to have reduced dipeptidase activity compared to the wild-type strain with all dipeptide substrates examined.     

Purification and primary structure determination of human lysosomal dipeptidase

The lysosomal metallopeptidase is an enzyme that acts preferentially on dipeptides with unsubstituted N- and C-termini. Its activity is highest in slightly acidic pH. Here we describe the isolation and characterization of lysosomal dipeptidase from human kidney. The isolated enzyme has the amino-terminal sequence DVAKAIINLAVY and is a homodimer with a molecular mass of 100 kDa. So far no amino acid sequence has been determined for this metallopeptidase. The complete primary structure as deduced from the nucleotide sequence revealed that the isolated dipeptidase is similar to blood plasma glutamate carboxypeptidase.     

Escherichia coli signal peptidase recognizes and cleaves the signal sequence of α-amylase originating from Bacillus licheniformis

The gene encoding the α-amylase from Bacillus licheniformis was cloned, with and without the native signal sequence, and expressed in Escherichia coli, resulting in the production of the recombinant protein in the cytoplasm as insoluble but enzymatically active aggregates. Expression with a low concentration of the inducer at low temperature resulted in the production of the recombinant protein in soluble form in a significantly higher amount. The protein produced with signal sequence was exported to the extracellular medium, whereas there was no export of the protein produced from the gene without the signal sequence. Similarly, the α-amylase activity in the culture medium increased with time after induction in case of the protein produced with signal sequence. Molecular mass determinations by MALDI-TOF mass spectrometry and N-terminal amino acid sequencing of the purified recombinant α-amylase from the extracellular medium revealed that the native signal peptide was cleaved by E. coli signal peptidase between Ala28 and Ala29. It seems possible that the signal peptide of α-amylase from B. licheniformis can be used for the secretion of other recombinant proteins produced using the E. coli expression system.     

Characterization of Native and Recombinant Forms of an Unusual Cobalt-Dependent Proline Dipeptidase (Prolidase) from the Hyperthermophilic Archaeon Pyrococcus furiosus

Proline dipeptidase (prolidase) was purified from cell extracts of the proteolytic, hyperthermophilic archaeon Pyrococcus furiosus by multistep chromatography. The enzyme is a homodimer (39.4 kDa per subunit) and as purified contains one cobalt atom per subunit. Its catalytic activity also required the addition of Co²⁺ ions (K_d, 0.24 mM), indicating that the enzyme has a second metal ion binding site. Co²⁺ could be replaced by Mn²⁺ (resulting in a 25% decrease in activity) but not by Mg²⁺, Ca²⁺, Fe²⁺, Zn²⁺, Cu²⁺, or Ni²⁺. The prolidase exhibited a narrow substrate specificity and hydrolyzed only dipeptides with proline at the C terminus and a nonpolar amino acid (Met, Leu, Val, Phe, or Ala) at the N terminus. Optimal prolidase activity with Met-Pro as the substrate occurred at a pH of 7.0 and a temperature of 100°C. The N-terminal amino acid sequence of the purified prolidase was used to identify in the P. furiosus genome database a putative prolidase-encoding gene with a product corresponding to 349 amino acids. This gene was expressed in Escherichia coli and the recombinant protein was purified. Its properties, including molecular mass, metal ion dependence, pH and temperature optima, substrate specificity, and thermostability, were indistinguishable from those of the native prolidase from P. furiosus. Furthermore, the K_m values for the substrate Met-Pro were comparable for the native and recombinant forms, although the recombinant enzyme exhibited a twofold greater V_max value than the native protein. The amino acid sequence of P. furiosus prolidase has significant similarity with those of prolidases from mesophilic organisms, but the enzyme differs from them in its substrate specificity, thermostability, metal dependency, and response to inhibitors. The P. furiosus enzyme appears to be the second Co-containing member (after methionine aminopeptidase) of the binuclear N-terminal exopeptidase family.     

Mutanase from a Paenibacillus isolate: Nucleotide sequence of the gene and properties of recombinant enzymes

A mutanase (α-1,3-glucanase)-producing microorganism was isolated from a soil sample and was identified as a relative of Paenibacillus sp. The mutanase was purified to homogeneity from culture, and its molecular mass was around 57 kDa. The gene for the mutanase was cloned by PCR using primers based on the N-terminal amino acid sequence of the purified enzyme. The determined nucleotide sequence of the gene consisted of 3651-bp open reading frame that encoded a predicted 1217-amino acid polypeptide including a 43-amino acid signal peptide. The mature enzyme showed similarity to mutanases RM1 of Bacillus sp. strain RM1 and KA-304 of Bacillus circulans with 65.6% and 62.7% identity, respectively. The predicted molecular mass of the mutanase was 123 kDa. Thus, the enzyme purified from the isolate appears to be truncated by proteolysis. The genes for the full-length and truncated mutanases were expressed in Bacillus subtilis cells, and the corresponding recombinant enzymes were purified to homogeneity. The molecular masses of the two enzymes were 116 and 57 kDa, respectively. The specific activity was 10-fold higher for the full-length enzyme than for the truncated enzyme. The optimal pH and temperature for both recombinant enzymes was pH 6.4 in citrate buffer and 45 °C to 50 °C. Amongst several tested polysaccharides, the recombinant full-length enzyme specifically hydrolyzed mutan.     

Triphenylmethane Reductase from Citrobacter sp. Strain KCTC 18061P: Purification, Characterization, Gene Cloning, and Overexpression of a Functional Protein in Escherichia coli

We purified to homogeneity an enzyme from Citrobacter sp. strain KCTC 18061P capable of decolorizing triphenylmethane dyes. The native form of the enzyme was identified as a homodimer with a subunit molecular mass of about 31 kDa. It catalyzes the NADH-dependent reduction of triphenylmethane dyes, with remarkable substrate specificity related to dye structure. Maximal enzyme activity occurred at pH 9.0 and 60°C. The enzymatic reaction product of the triphenylmethane dye crystal violet was identified as its leuco form by UV-visible spectral changes and thin-layer chromatography. A gene encoding this enzyme was isolated based on its N-terminal and internal amino acid sequences. The nucleotide sequence of the gene has a single open reading frame encoding 287 amino acids with a predicted molecular mass of 30,954 Da. Although the deduced amino acid sequence displays 99% identity to the hypothetical protein from Listeria monocytogenes strain 4b H7858, it shows no overall functional similarity to any known protein in the public databases. At the N terminus, the amino acid sequence has high homology to sequences of NAD(P)H-dependent enzymes containing the dinucleotide-binding motif GXXGXXG. The enzyme was heterologously expressed in Escherichia coli, and the purified recombinant enzyme showed characteristics similar to those of the native enzyme. This is the first report of a triphenylmethane reductase characterized from any organism.     

Thermostable NADP+-Dependent Medium-Chain Alcohol Dehydrogenase from Acinetobacter sp. Strain M-1: Purification and Characterization and Gene Expression in Escherichia coli

NADPH-dependent alkylaldehyde reducing enzyme, which was greatly induced by n-hexadecane, from Acinetobacter sp. strain M-1 was purified and characterized. The purified enzyme had molecular masses of 40 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 160 kDa as determined by gel filtration chromatography. The enzyme, which was shown to be highly thermostable, was most active toward n-heptanal and could use n-alkylaldehydes ranging from C₂ to C₁₄ and several substituted benzaldehydes, including the industrially important compounds cinnamyl aldehyde and anisaldehyde, as substrates. The alrA gene coding for this enzyme was cloned, and its nucleotide sequence was determined. The deduced amino acid sequence encoded by the alrA gene exhibited homology to the amino acid sequences of zinc-containing alcohol dehydrogenases from various sources. The gene could be highly expressed in Escherichia coli, and the product was purified to homogeneity by simpler procedures from the recombinant than from the original host. Our results show that this enzyme can be used for industrial bioconversion of useful alcohols and aldehydes.     

Purification and identification of a novel primitive secretory enzyme catalyzing the hydrolysis of imidazole-related dipeptides in the jawless vertebrate Lethenteron reissneri

Imidazole-related dipeptides, such as carnosine and anserine, occur widely in skeletal muscles of jawed vertebrates. All of the known enzymes that catalyze the hydrolysis of these dipeptides belong to the M20A metallopeptidase subfamily; two secretory enzymes, serum carnosinase (EC 3.4.13.20) and anserinase (EC 3.4.13.5), and one non-secretory enzyme, cytosolic nonspecific dipeptidase (EC 3.4.13.18). Here we report the enzymatic characterization and molecular identification of an unidentified enzyme, which catalyzes the hydrolysis of these dipeptides, from the skeletal muscle of Far Eastern brook lamprey (Lethenteron reissneri). A 60-kDa subunit protein of the enzyme was purified to near homogeneity. We cloned two M20A genes from the skeletal muscle of Far Eastern brook lamprey; one was a secretory-type gene encoding for the 60-kD protein, and another was a non-secretory-type gene presumably encoding for cytosolic nonspecific dipeptidase. Our findings indicate that the purified enzyme is a N-glycosylated secretory M20A dipeptidase distributed specifically in the jawless vertebrate group, and may be derived from a common ancestor gene between serum carnosinase and anserinase. We propose that this dipeptidase is a novel secretory M20A enzyme and is classified as neither serum carnosinase nor anserinase.     

Polysaccharide Lyase: Molecular Cloning, Sequencing, and Overexpression of the Xanthan Lyase Gene of Bacillus sp. Strain GL1

When grown on xanthan as a carbon source, the bacterium Bacillus sp. strain GL1 produces extracellular xanthan lyase (75 kDa), catalyzing the first step of xanthan depolymerization (H. Nankai, W. Hashimoto, H. Miki, S. Kawai, and K. Murata, Appl. Environ. Microbiol. 65:2520–2526, 1999). A gene for the lyase was cloned, and its nucleotide sequence was determined. The gene contained an open reading frame consisting of 2,793 bp coding for a polypeptide with a molecular weight of 99,308. The polypeptide had a signal peptide (2 kDa) consisting of 25 amino acid residues preceding the N-terminal amino acid sequence of the enzyme and exhibited significant homology with hyaluronidase of Streptomyces griseus (identity score, 37.7%). Escherichia coli transformed with the gene without the signal peptide sequence showed a xanthan lyase activity and produced intracellularly a large amount of the enzyme (400 mg/liter of culture) with a molecular mass of 97 kDa. During storage at 4°C, the purified enzyme (97 kDa) from E. coli was converted to a low-molecular-mass (75-kDa) enzyme with properties closely similar to those of the enzyme (75 kDa) from Bacillus sp. strain GL1, specifically in optimum pH and temperature for activity, substrate specificity, and mode of action. Logarithmically growing cells of Bacillus sp. strain GL1 on the medium with xanthan were also found to secrete not only xanthan lyase (75 kDa) but also a 97-kDa protein with the same N-terminal amino acid sequence as that of xanthan lyase (75 kDa). These results suggest that, in Bacillus sp. strain GL1, xanthan lyase is first synthesized as a preproform (99 kDa), secreted as a precursor (97 kDa) by a signal peptide-dependent mechanism, and then processed into a mature form (75 kDa) through excision of a C-terminal protein fragment with a molecular mass of 22 kDa.     

LmxMPK4, an essential mitogen-activated protein kinase of Leishmania mexicana is phosphorylated and activated by the STE7-like protein kinase LmxMKK5

The essential mitogen-activated protein kinase (MAP kinase), LmxMPK4, of Leishmania mexicana is minimally active when purified following recombinant expression in Escherichia coli and was therefore unsuitable for drug screening until now. Using an E. coli protein co-expression system we identified LmxMKK5, a STE7-like protein kinase from L. mexicana, which phosphorylates and activates recombinant LmxMPK4 in vitro. LmxMKK5 is comprised of 525 amino acids and has a calculated molecular mass of 55.9 kDa. The co-expressed, purified LmxMPK4 showed strong phosphotransferase activity in radiometric kinase assays and was confirmed by immunoblot and tandem mass spectrometry analyses to be phosphorylated on threonine 190 and tyrosine 192 of the typical TXY MAP kinase activation motif. The universal protein kinase inhibitor staurosporine reduced the phosphotransferase activity of co-expressed and activated LmxMPK4 in a dose-dependent manner. To our knowledge this is the first time that an in vitro activator of an essential Leishmania MAP kinase was identified and our findings form the basis for the development of drug screening assays to identify small molecule inhibitors of LmxMPK4 in the search for new therapeutic drugs against leishmaniasis.     

scsB,a cDNA encoding the hydrogenosomal β subunit of succinyl-CoA synthetase from the anaerobic fungus Neocallimastix frontalis

A clone containing a Neocallimastix frontalis cDNA assumed to encode the β subunit of succinyl-CoA synthetase (SCSB) was identified by sequence homology with prokaryotic and eukaryotic counterparts. An open reading frame of 1311?bp was found. The deduced 437 amino acid sequence showed a high degree of identity to the β-succinyl-CoA synthetase of Escherichia coli (46%), the mitochondrial β-succinyl-CoA synthetase from pig (48%) and the hydrogenosomal β-succinyl-CoA synthetase from Trichomonas vaginalis (49%). The G+C content of the succinyl-CoA synthetase coding sequence (43.8%) was considerably higher than that of the 5′ (14.8%) and 3′ (13.3%) non-translated flanking sequences, as has been observed for other genes from N. frontalis. The codon usage pattern was biased, with only 34 codons used and a strong preference for a pyrimidine (T) in the third positions of the codons. The coding sequence of the β-succinyl-CoA synthetase cDNA was cloned in an E. coli expression vector encoding a 6(His) tag. The recombinant protein was purified by affinity binding and used to produce polyclonal antibodies. The anti-succinyl-CoA synthetase serum recognized a 45?kDa protein from a N. frontalis fraction enriched for hydrogenosomes and similar polypeptides in two related anaerobic fungi, Piromyces rhizinflata (45?kDa) and Caecomyces communis (47?kDa). Immunocytochemical experiments suggest that succinyl-CoA synthetase is located in the hydrogenosomal matrix. Staining for SCS activity in native electrophoretic gels revealed a band with an apparent molecular weight of approximately 330?kDa. The C-terminus of the succinyl-CoA synthetase sequence was devoid of the typical targeting signals identified so far in microbody proteins, indicating that N. frontalis uses a different signal for sorting SCSB into hydrogenosomes. Based on comparisons with other proteins we propose a putative N-terminal targeting signal for succinyl-CoA synthetase of N. frontalis that shows some of the features of mitochondrial targeting sequences.     

Gene Cloning,Expression, and Substrate Specificity of an Imidase from the Strain <Emphasis Type="Italic">Pseudomonas putida</Emphasis> YZ-26

A gene-encoding imidase was isolated from Pseudomonas putdia YZ-26 genomic DNA using a combination of polymerase chain reaction and activity screening the recombinant. Analysis of the nucleotide sequence revealed that an open reading frame (ORF) of 879 bp encoded a protein of 293 amino acids with a calculated molecular weight of 33712.6 kDa. The deduced amino-acid sequence showed 78% identity with the imidase from Alcaligenes eutrophus 112R4 and 80% identity with N-terminal 20 amino-acid imidase from Blastobacter sp. A17p-4. Next, the ORF was subcloned into vector pET32a to form recombinant plasmid pEI. The enzyme was overexpressed in Escherichia coli and purified to homogeneity by Ni²⁺–NTA column, with 75% activity recovery. The subunit molecular mass of the recombinant imidase as estimated by sodium dodecyl sulfate–polyacrylamide gel electrophoresis was approximately 36 kDa, whereas its functional unit was approximately 141 kDa with four identical subunits determined by size-exclusion chromatography. The purified enzyme showed the highest activity and affinity toward succinimide, and some other substrates, such as dihydrouracil, hydantoin, succinimide, and maleimde, were investigated.     

Mechanism of lysosome rupture by dipeptides

Low concentrations of some neutral dipeptides, such as L -Ala-L -Ala, rapidly disrupt rat liver lysosmes. The phenomenon has been attributed to an osmotic imbalance generated by the production of amino acids in the lysosme by lysosomal dipeptidase activity. This hypothesis is challenged by testing several pairs of dipeptides available in both D - and L -forms and a range of dipeptides whose susceptibility to lysosomal dipeptidase activity is known. A good correlation was found between the lytic ability of dipeptides and their capacity to cross the lysosome membrane and be hydrolysed by lysosomal dipeptidase. The osmotic-imbalance hypothesis is critically evaluated in the light of the results and of recent information concerning the carrier-mediated transport of amino acids and dipeptides across the lysosome membrane. It is concluded that intralysosomal generation of amino acids remains the most plausible explanation of the lytic activity of dipeptides, and that the dipeptide proter(s) in the lysosome membrane must have higher K_m than the amino acid porters.     

Gene cloning and characterization of thermostable peptidyl prolyl cis-trans isomerase (PPIase) from Bacillus stearothermophilus SIC1

The peptidyl prolyl cis-trans isomerase (PPIase, EC 5.2.1.8) gene (ppiT) from Bacillus stearothermophilus SIC1 was cloned on the basis of a partial amino acid sequence of the purified enzyme. ppiT was found as an open reading frame (501 bases) which coded for a protein consisting of 167 amino acid residues (molecular weight, 18,349) (GenBank accession number D42050). The cloned ppiT was overexpressed in Escherichia coli cells using pET-8c as an expression vector. The enzyme was purified by heat treatment and column chromatography on DEAE-Sepharose CL-6B. Purification was about 148-fold and the molecular weight of the enzyme was estimated to be about 18.0 kDa by SDS-PAGE. PPIase activity was determined using synthetic peptide as a substrate in a 2-step reaction coupled with chymotrypsin treatment. The enzyme was stable at pH 7.5–8.0. No heat denaturation was observed when the enzyme was treated at 60°C for 30 min. The PPIase purified from recombinant E. coli has almost the same characteristics as that from B. stearothermophilus SIC1. In refolding solution, the PPIase enhanced the isomerization rate of unfolded RNase T1.     

Sequence Analysis of Two Cryptic Plasmids from Bifidobacterium longum DJO10A and Construction of a Shuttle Cloning Vector

Bifidobacterium longum DJO10A is a recent human isolate with probiotic characteristics and contains two plasmids, designated pDOJH10L and pDOJH10S. The complete sequences of both these plasmids have now been determined and consist of two circular DNA molecules of 10,073 and 3,661 bp, with G+C contents of 62.2% and 66.2%, respectively. Plasmid pDOJH10L is a cointegrate plasmid consisting of DNA regions exhibiting very high sequence identity to two other B. longum plasmids, pNAC2 (98%) and pKJ50 (96%), together with another region. Interestingly, the rolling circular replication (RCR) regions of both the pNAC2- and pKJ50-like plasmids were disrupted during the recombination event leading to a further recombination event to acquire a functional replicon. This consists of a new fused rep gene and an RCR-type ori consisting of a conserved DnaA box in an AT-rich region followed by four contiguous repeated sequences consistent with an iteron structure and an inverted repeat. The smaller pDOJH10S had no sequence similarity to any other characterized plasmid from bifidobacteria. In addition, it did not contain any features consistent with RCR, which is the replication mechanism proposed for all the bifidobacteria plasmids characterized to date. It did exhibit sequence similarity with several theta replication-related replication proteins from other gram-positive, high-G+C bacteria, with the closest match from a Rhodococcus rhodochrous plasmid, suggesting a theta mechanism of replication. S1 nuclease analysis of both plasmids in B. longum DJO10A revealed single-strand DNA intermediates for pDOJH10L, which is consistent for RCR, but none were detected for pDOJH10S. As the G+C content of pDOJH10S is similar to that of Rhodococcus rhodochrous (67%) and significantly higher than that of B. longum (60.1%), it may have been acquired through horizontal gene transfer from a Rhodococcus species, as both genera are members of the Actinomycetes and are intestinal inhabitants. An Escherichia coli-B. longum shuttle cloning vector was constructed from pDOJH10S and the E. coli ori region of p15A, a lacZ gene with a multiple cloning site of pUC18, and a chloramphenicol resistance gene (CAT) of pCI372 and was transformed successfully into E. coli and B. longum. It could not be introduced into lactic acid bacteria (Lactococcus and Lactobacillus), showing it was not very promiscuous. It was stably maintained in B. longum in the absence of antibiotic pressure for 92 generations, which is consistent with the segregational stability of theta-replicating plasmids in gram-positive bacteria. This is the first cloning vector for bifidobacteria that does not utilize RCR and should be useful for the stable introduction of heterologous genes into these dominant inhabitants of the large intestine.