以SecA蛋白为“动力泵”的细菌Sec蛋白转运途径

细菌细胞中,三分之一的蛋白质是在合成后被转运到细胞质外才发挥功能的.其中大多数蛋白是通过Sec途径(即分泌途径secretion pathway)进行跨膜运动的.Sec转运酶是一个多组分的蛋白质复合体,膜蛋白三聚体SecYEG及水解ATP的动力蛋白SecA构成了Sec转运酶的核心.整合膜蛋白SecD,SecF和vajC形成了一个复合体亚单位,可与SecYEG相连并稳定SecA蛋白的膜结合形式.SecB是蛋白质转运中的伴侣分子,可以和很多蛋白质前体结合.SecM是由位于secA基因上游的secM基因编码的,可调节SecA蛋白的合成量,维持细胞在不同环境条件下的正常生长.新生肽链的信号肽被高度保守的SRP特异性识别.伴侣分子SecB通过与细胞膜上的SecA二聚体特异性结合将蛋白质前体引导至Sec转运途径,起始转运过程.结合蛋白质前体的SecA与组成转运通道的SecYEG复合体具有较高的亲和性.SecA经历插入和脱离细胞内膜SecYEG通道的循环,为转运提供所需的能量,每一次循环可推动20多个氨基酸的连续跨膜运动.     

Characterization of the supporting role of SecE in protein translocation

SecYEG functions as a membrane channel for protein export. SecY constitutes the protein-conducting pore, which is enwrapped by SecE in a V-shaped manner. In its minimal form SecE consists of a single transmembrane segment that is connected to a surface-exposed amphipathic α-helix via a flexible hinge. These two domains are the major sites of interaction between SecE and SecY. Specific cleavage of SecE at the hinge region, which destroys the interaction between the two SecE domains, reduced translocation. When SecE and SecY were disulfide bonded at the two sites of interaction, protein translocation was not affected. This suggests that the SecY and SecE interactions are static, while the hinge region provides flexibility to allow the SecY pore to open.     

Multiple SecA molecules drive protein translocation across a single translocon with SecG inversion

SecA is a translocation ATPase that drives protein translocation. D209N SecA, a dominant-negative mutant, binds ATP but is unable to hydrolyze it. This mutant was inactive to proOmpA translocation. However, it generated a translocation intermediate of 18 kDa. Further addition of wild-type SecA caused its translocation into either mature OmpA or another intermediate of 28 kDa that can be translocated into mature by a proton motive force. The addition of excess D209N SecA during translocation caused a topology inversion of SecG. Moreover, an intermediate of SecG inversion was identified when wild-type and D209N SecA were used in the same amounts. These results indicate that multiple SecA molecules drive translocation across a single translocon with SecG inversion. Here, we propose a revised model of proOmpA translocation in which a single catalytic cycle of SecA causes translocation of 10-13 kDa with ATP binding and hydrolysis, and SecG inversion is required when the next SecA cycle begins with additional ATP hydrolysis.     

以SecA为靶点的新型抗绿脓杆菌药物细胞水平筛选模型的建立和应用

Sec途径(即分泌途径secretion pathway)是蛋白质转运的主要途径.其中,最为关键的组分之一是SecAATP酶,是蛋白质转运途径中的"动力泵",通过ATP的水解循环驱使蛋白质前体穿过细菌内膜,在细菌中是不可缺少的.我们推测抑制SecAATP酶活性的化合物.必然会在一定程度上抑制蛋白质的转运和分泌.通过绿脓杆菌与大肠杆菌SecA蛋白的互补作用,利用本实验室构建的高效表达SecA蛋白的基因工程菌,建立了SecA蛋白ATP酶活性抑制剂的细胞水平筛选模型.利用所纯化的绿脓杆菌SecA蛋白的ATP酶活测定体系,验证了所建立的细胞水平筛选模型具有一定的特异性.研究结果表明其中两个酯相组分在细胞水平和蛋白水平均具有活性,值得进行深入的研究.     

SecA alone can promote protein translocation and ion channel activity: SecYEG increases efficiency and signal peptide specificity

SecA is an essential component of the Sec-dependent protein translocation pathway across cytoplasmic membranes in bacteria. Escherichia coli SecA binds to cytoplasmic membranes at SecYEG high affinity sites and at phospholipid low affinity sites. It has been widely viewed that SecYEG functions as the essential protein-conducting channel through which precursors cross the membranes in bacterial Sec-dependent pathways, and that SecA functions as a motor to hydrolyze ATP in translocating precursors through SecYEG channels. We have now found that SecA alone can promote precursor translocation into phospholiposomes. Moreover, SecA-liposomes elicit ionic currents in Xenopus oocytes. Patch-clamp recordings further show that SecA alone promotes signal peptide- or precursor-dependent single channel activity. These activities were observed with the functional SecA at about 1-2 μM. The results show that SecA alone is sufficient to promote protein translocation into liposomes and to elicit ionic channel activity at the phospholipids low affinity binding sites, thus indicating that SecA is able to form the protein-conducting channels. Even so, such SecA-liposomes are less efficient than those with a full complement of Sec proteins, and lose the signal-peptide proofreading function, resembling the effects of PrlA mutations. Addition of purified SecYEG restores the signal peptide specificity and increases protein translocation and ion channel activities. These data show that SecA can promote protein translocation and ion channel activities both when it is bound to lipids at low affinity sites and when it is bound to SecYEG with high affinity. The latter of the two interactions confers high efficiency and specificity.     

Crystal structure of the translocation ATPase SecA from Thermus thermophilus reveals a parallel, head-to-head dimer

The mechanism of pre-protein export through the bacterial cytoplasmic membrane, in which the SecA ATPase plays a crucial role as an "energy supplier", is poorly understood. In particular, biochemical and structural studies provide contradictory data as to the oligomeric state of SecA when it is integrated into the active trans-membrane translocase. Here, we report the 2.8 A resolution crystal structure of the Thermus thermophilus SecA protein (TtSecA). Whereas the structure of the TtSecA monomer closely resembles that from other bacteria, the oligomeric state of TtSecA is strikingly distinct. In contrast to the antiparallel (head-to-tail) dimerization reported previously for the other bacterial systems, TtSecA forms parallel (head-to-head) dimers that are reminiscent of open scissors. The dimer interface is abundant in bulky Arg and Lys side-chains from both subunits, which stack on one another to form an unusual "basic zipper" that is highly conserved, as revealed by homology modeling and sequence analysis. The basic zipper is sealed on both ends by two pairs of the salt bridges formed between the basic side-chains from the zipper and two invariant acidic residues. The organization of the dimers, in which the two pre-protein binding domains are located proximal to each other at the tip of the "scissors", might allow a concerted mode of substrate recognition while the opening/closing of the scissors might facilitate translocation.     

Evolution of the prokaryotic protein translocation complex: a comparison of archaeal and bacterial versions of SecDF

Protein translocation across the prokaryotic plasma membrane occurs at the translocon, an evolutionarily conserved membrane-embedded proteinaceous complex. Together with the core components SecYE, prokaryotic translocons also contain auxilliary proteins, such as SecDF. Alignment of bacterial and archaeal SecDF protein sequences reveals the presence of a similar number of homologous regions within each protein. Moreover, the conserved sequence domains in the archaeal proteins are located in similar positions as their bacterial counterparts. When these domains are, however, compared along Bacteria-Archaea lines, a much lower degree of similarity is detected. In Bacteria, SecDF are thought to modulate the membrane association of SecA, the ATPase that provides the driving force for bacterial protein secretion. As no archaeal version of SecA has been detected, the sequence differences reported here may reflect functional differences between bacterial and archaeal SecDF proteins, and by extension, between the bacterial and archaeal protein translocation processes. Moreover, the apparent absence of SecDF in several completed archaeal genomes suggests that differences may exist in the process of protein translocation within the archaeal domain itself.     

Covalently dimerized SecA is functional in protein translocation

The ATPase SecA provides the driving force for the transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. SecA exists as a dimer in solution, but the exact oligomeric state of SecA during membrane binding and preprotein translocation is a topic of debate. To study the requirements of oligomeric changes in SecA during protein translocation, a non-dissociable SecA dimer was formed by oxidation of the carboxyl-terminal cysteines. The cross-linked SecA dimer interacts with the SecYEG complex with a similar stoichiometry as non-cross-linked SecA. Cross-linking reversibly disrupts the SecB binding site on SecA. However, in the absence of SecB, the activity of the disulfide-bonded SecA dimer is indistinguishable from wild-type SecA. Moreover, SecYEG binding stabilizes a cold sodium dodecylsulfate-resistant dimeric state of SecA. The results demonstrate that dissociation of the SecA dimer is not an essential feature of the protein translocation reaction.     

The dispensability and requirement of SecA N-terminal aminoacyl residues for complementation,membrane binding,lipid-specific domains and channel activities

SecA is an essential multifunctional protein for the translocation of proteins across bacterial membranes. Though SecA is known to function in the membrane, the detailed mechanism for this process remains unclear. In this study we constructed a series of SecA N-terminal deletions and identified two specific domains crucial for initial SecA/membrane interactions. The first small helix, the linker and part of the second helix (Δ2-22) were found to be dispensable for SecA activity in complementing the growth of a SecA ts mutant. However, deletions of N-terminal aminoacyl residues 23–25 resulted in severe progressive retardation of growth. Moreover, a decrease of SecA activity caused by N-terminal deletions correlated to the loss of SecA membrane binding, formation of lipid-specific domains and channel activity. All together, the results indicate that the N-terminal aminoacyl residues 23–25 play a critical role for SecA binding to membranes and that the N-terminal limit of SecA for activity is at the 25th amino acid.     

SecA protein: Autoregulated initiator of secretory precursor protein translocation across theE. coli plasma membrane

Several classes ofsecA mutants have been isolated which reveal the essential role of this gene product forE. coli cell envelope protein secretion. SecA-dependent,in vitro protein translocation systems have been utilized to show that SecA is an essential, plasma membrane-associated, protein translocation factor, and that SecA's ATPase activity appears to play an essential but as yet undefined role in this process. Cell fractionation studies suggested that SecA protein is in a dynamic state within the cell, occurring in soluble, peripheral, and integral membraneous states. These data have been used to argue that SecA is likely to promote the initial insertion of secretory precursor proteins into the plasma membrane in a manner dependent on ATP hydrolysis. The protein secretion capability of the cell has been shown to translationally regulatesecA expression with SecA protein serving as an autogenous repressor, although the exact mechanism and purpose of this regulation need to be defined further.     

SecA is plastid-encoded in a red alga: implications for the evolution of plastid genomes and the thylakoid protein import apparatus

Summary Partial sequence analysis of the plastid DNA (ptDNA) from a red alga, Antithamnion sp., revealed the presence of a homologue to the Escherichia coli SecA gene as well as two open reading frames (ORF 510, ORF 179). In addition a sec Y homologue has been detected on the plastid genome by heterologous hybridization. None of these genes has been found in completely sequenced chlorophytic plastid genomes. SecA and secY gene copies were also detected in the ptDNA of a chromophytic alga, indicating that secAY may be ubiquitous in rhodophytes and chromophytes. The significance of these findings for the evolution of plastid genomes and the thylakoid protein import mechanism is discussed.     

The bacterial protein-translocation complex: SecYEG dimers associate with one or two SecA molecules

In bacteria, the Sec-protein transport complex facilitates the passage of most secretory and membrane proteins across and into the plasma membrane. The core complex SecYEG forms the protein channel and engages either ribosomes or the ATPase SecA, which drive translocation of unfolded polypeptide chains through the complex and into the periplasmic space. Escherichia coli SecYEG forms dimers in membranes, but in detergent solution the population of these dimers is low. However, we find that stable dimers can be assembled by the addition of a monoclonal antibody. Normally, a stable SecYEG-SecA complex can only form on isolated membranes or on reconstituted proteo-liposomes. The antibody-stabilised SecYEG dimer binds one SecA molecule in detergent solution. In the presence of AMPPNP, a non-hydrolysable analogue of ATP, a complex forms containing one antibody and two each of SecYEG and SecA. SecYEG monomers or tetramers do not associate to a significant degree with SecA. The observed variability in the stoichiometry of SecYEG and SecA association and its nucleotide modulation may be important and necessary for the protein translocation reaction.     

SecA-dependence of the translocation of a large periplasmic loop in the Escherichia coli MalF inner membrane protein is a function of sequence context

We have analysed the translocation of a large periplasmic loop in the Escherichia coli MalF Inner membrane protein when placed in different sequence contexts and under conditions when the function of the SecA protein is Inhibited. The results show that the degree of SecA-dependence varies with sequence context: while translocation of the large loop In its normal context Is only minimally affected by SecA Inhibition, translocation is much more sensitive to SecA inhibition when the loop is placed in the context of other inner membrane proteins. Conversely, when the large MalF loop is replaced by segments from other proteins, translocation of those segments is again very sensitive to SecA inhibition. Thus, SecA-dependence is not an all-or-none phenomenon and Is not only a simple function of, e.g. the length of a translocated segment or the hydrophobicity of the flanking transmembrane segments.     

Structural determinants of protein translocation in bacteria: conformational flexibility of SecA IRA1 loop region

Bacteria employ the SecA motor protein to push unfolded proteins across the cytoplasmic membrane through the SecY protein‐conducting channel complex. The crystal structure of the SecA–SecY complex shows that the intramolecular regulator of ATPase1 (IRA1) SecA domain, made up of two helices and the loop between them, is partly inserted into the SecY conducting channel, with the loop between the helices as the main functional region. A computational analysis suggested that the entire IRA1 domain is structurally autonomous, and was the basis to synthesize peptide analogs of the SecA IRA1 loop region, to the aim of investigating its conformational preferences. Our study indicates that the loop region populates a predominantly flexible state, even in the presence of structuring agent. This provides indirect evidence that the SecA loop–SecY receptor docking involves loop‐mediated opening of the SecY channel. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

A Specific interaction between SecA2 and a region of the preprotein adjacent to the signal peptide occurs during transport via the accessory Sec system

The accessory Sec systems of streptococci and staphylococci mediate the transport of a family of large, serine-rich glycoproteins to the bacterial cell surface. These systems are comprised of SecA2, SecY2, and three core accessory Sec proteins (Asp1-3). In Streptococcus gordonii, transport of the serine-rich glycoprotein GspB requires both a unique 90-residue N-terminal signal peptide and an adjacent 24-residue segment (the AST domain). We used in vivo site-specific photo-cross-linking to identify proteins that interact with the AST domain during transport. To facilitate this analysis, the entire accessory Sec system of S. gordonii was expressed in Escherichia coli. The determinants of GspB trafficking to the accessory Sec system in E. coli matched those in S. gordonii, establishing the validity of this approach. When the photo-cross-linker was placed within the AST domain, the preprotein was found to cross-link to SecA2. Importantly, no cross-linking to SecA was detected. Cross-linking of the N-terminal end of the AST domain to SecA2 occurred regardless of whether Asp1-3 were present. However, cross-linking to the C-terminal end was dependent on the Asps. The combined results indicate that full engagement of the AST domain by SecA2 is modulated by one or more of the Asps, and suggest that this process is important for initiating transport.     

Analysis of yeast prp20 mutations and functional complementation by the human homologue RCC1, a protein involved in the control of chromosome condensation

Summary A DNA fragment that codes for the 364 amino-terminal amino acid residues of a putative Bacillus subtilis SecA homologue has been cloned using the Escherichia coli SecA gene as a probe. The deduced amino acid sequence showed 58% identity to the aminoterminus of the E. coli SecA protein. A DNA fragment which codes for 275 amino-terminal amino acid residues of the B. subtilis SecA homologue was expressed in E. coli and the corresponding gene product was shown to be recognized by anti-E. coli SecA antibodies. This polypeptide, although only about 30% the size of the E. coli SecA protein, also restored growth of E. coli MM52 (secA ^ts) at the non-permissive temperature and the translocation defect of proOmpA in this mutant was relieved to a substantial extent.     

Electron microscopic visualization of asymmetric precursor translocation intermediates: SecA functions as a dimer

SecA, the ATPase of Sec translocase, mediates the post-translational translocation of preprotein through the protein-conducting channel SecYEG in the bacterial inner membrane. Here we report the structures of Escherichia coli Sec intermediates during preprotein translocation as visualized by electron microscopy to probe the oligomeric states of SecA during this process. We found that the translocase holoenzyme is symmetrically assembled by SecA and SecYEG on proteoliposomes, whereas the translocation intermediate 31 (I₃₁) becomes asymmetric because of the presence of preprotein. Moreover, SecA is a dimer in these two translocation complexes. This work also shows surface topological changes in the components of translocation intermediates by immunogold labeling. The channel entry for preprotein translocation was found at the center of the I₃₁ structures. Our results indicate that the presence of preprotein introduces asymmetry into translocation intermediates, while SecA remains dimeric during the translocation process.     

Oligomeric states of the SecA and SecYEG core components of the bacterial Sec translocon

Many proteins synthesized in the cytoplasm ultimately function in non-cytoplasmic locations. In Escherichia coli, the general secretory (Sec) pathway transports the vast majority of these proteins. Two fundamental components of the Sec transport pathway are the SecYEG heterotrimeric complex that forms the channel through the cytoplasmic membrane, and SecA, the ATPase that drives the preprotein to and across the membrane. This review focuses on what is known about the oligomeric states of these core Sec components and how the oligomeric state might change during the course of the translocation of a preprotein.     

SecA dimer cross-linked at its subunit interface is functional for protein translocation

SecA facilitates protein transport across the eubacterial plasma membrane by its association with cargo proteins and the SecYEG translocon, followed by ATP-driven conformational changes that promote protein translocation in a stepwise manner. Whether SecA functions as a monomer or a dimer during this process has been the subject of considerable controversy. Here we utilize cysteine-directed mutagenesis along with the crystal structure of the SecA dimer to create a cross-linked dimer at its subunit interface, which was normally active for in vitro protein translocation.     

The twin-arginine translocation system and its capability for protein secretion in biotechnological protein production

The biotechnological production of recombinant proteins is challenged by processes that decrease the yield, such as protease action, aggregation, or misfolding. Today, the variation of strains and vector systems or the modulation of inducible promoter activities is commonly used to optimize expression systems. Alternatively, aggregation to inclusion bodies may be a desired starting point for protein isolation and refolding. The discovery of the twin-arginine translocation (Tat) system for folded proteins now opens new perspectives because in most cases, the Tat machinery does not allow the passage of unfolded proteins. This feature of the Tat system can be exploited for biotechnological purposes, as expression systems may be developed that ensure a virtually complete folding of a recombinant protein before purification. This review focuses on the characteristics that make recombinant Tat systems attractive for biotechnology and discusses problems and possible solutions for an efficient translocation of folded proteins.