Conformational changes of enzymes adsorbed at liquid-solid interface: relevance to enzymatic activity

FTIR with attenuated total reflectance spectroscopy was used to study in situ adsorption of enzymes at water-solid interfaces to better understand how conformational changes may monitor enzymatic activity. Because the adsorption process depends on hydrophobic and electrostatic interactions, conformational changes were studied as a function of the nature of the adsorbing substrates, which are hydrophobic or hydrophilic in character. The adsorption kinetics of two examples of serine enzymes, alpha-chymotrypsin (alpha-chym) and Humicola lanuginosa lipase (HLL), were studied. The secondary structure and solvation of the adsorbed enzymes were both compared to the dissolved enzymes. The positively charged alpha-chym was adsorbed on a negatively charged hydrophilic support with minor structural changes, but the negatively charged lipase had no affinity for a similar support. Both enzymes were strongly retained on the hydrophobic support. The secondary and tertiary structures of the alpha-chym adsorbed on the hydrophobic support were strongly altered, which correlates to the inhibition of enzymatic hydrolysis. The specific solvation obtained for the adsorbed HLL is consistent with the existence of the open conformer in relation to the enhanced enzymatic activity at the water-hydrophobic interface.     

Novel thymine-functionalized polystyrenes for applications in biotechnology. 2. Adsorption of model proteins

This paper investigates the adsorption of bovine serum albumin (BSA) and bovine hemoglobin (BHb) model proteins onto novel thymine-functionalized polystyrene (PS-VBT) microspheres, in comparison with polystyrene (PS) microspheres. Maximum adsorption was obtained for both proteins near their corresponding isoelectric points (pI at pH = 4.7 for BSA and 7.1 for BHb). FTIR and adsorption isotherm analysis demonstrated that, although both proteins were physisorbed onto PS through nonspecific hydrophobic interactions, adsorption onto the functionalized copolymers occurred by both physisorption and chemisorption via hydrogen bonding. FTIR analysis also indicated conformational changes in the secondary structure of BSA and BHb adsorbed onto PS, whereas little or no conformation change was seen in the case of adsorption onto PS-VBT. Atomic force microscopy (AFM), consistent with the isotherm results, also demonstrated monolayer adsorption for both proteins. AFM images of BSA adsorbed onto copolymers with 20 mol % surface VBT loading showed exclusively end-on orientation. Adsorption onto copolymers with lower functionality showed mixed end-on and side-on orientation modes of BSA, and only the side-on orientation was observed on PS. The AFM results agreed well with theoretically calculated and experimentally obtained adsorption capacities. AFM together with calculated and observed adsorption capacity data for BHb indicated that this protein might be highly compressed on the copolymer surface. Adsorption from a binary mixture of BSA and BHb onto PS-VBT showed good separation at pH=7.0; approximately 90% of the adsorbed protein was BHb. The novel copolymers have potential applications in biotechnology.     

The density and refractive index of adsorbing protein layers

The structure of the adsorbing layers of native and denatured proteins (fibrinogen, gamma-immunoglobulin, albumin, and lysozyme) was studied on hydrophilic TiO(2) and hydrophobic Teflon-AF surfaces using the quartz crystal microbalance with dissipation and optical waveguide lightmode spectroscopy techniques. The density and the refractive index of the adsorbing protein layers could be determined from the complementary information provided by the two in situ instruments. The observed density and refractive index changes during the protein-adsorption process indicated the presence of conformational changes (e.g., partial unfolding) in general, especially upon contact with the hydrophobic surface. The structure of the formed layers was found to depend on the size of the proteins and on the experimental conditions. On the TiO(2) surface smaller proteins formed a denser layer than larger ones and the layer of unfolded proteins was less dense than that adsorbed from the native conformation. The hydrophobic surface induced denaturation and resulted in the formation of thin compact protein films of albumin and lysozyme. A linear correlation was found between the quartz crystal microbalance measured dissipation factor and the total water content of the layer, suggesting the existence of a dissipative process that is related to the solvent molecules present inside the adsorbed protein layer. Our measurements indicated that water and solvent molecules not only influence the 3D structure of proteins in solution but also play a crucial role in their adsorption onto surfaces.     

Effects of protein conformational changes on separation performance in electrostatic interaction chromatography: unfolded proteins and PEGylated proteins

As it is important to understand how protein conformational changes affect the separation performance in ion exchange chromatography (IEC), we investigated two model systems, unfolded proteins (lysozyme and bovine serum albumin) with urea and dithiothreitol, and PEGylated proteins (lysozyme attached with polyethyleneglycol molecular weight 5000). Linear gradient elution IEC experiments were carried out and the data were analysed by our model previously presented in order to obtain the binding site value B and the peak salt concentration I(R). Unfolded proteins (bovine serum albumin and lysozyme) with urea and dithiothreitol showed weaker retention and larger binding site values compared with the values for native proteins. Multiple PEGylated lysozyme peaks were separated, and eluted earlier than the native peak appeared. There is a good correlation between B and I(R) for PEGylated lysozymes.     

Conformation,orientation, and adsorption kinetics of dermaseptin B2 onto synthetic supports at aqueous/solid interface

The antimicrobial activity of cationic amphipathic peptides is due mainly to the adsorption of peptides onto target membranes, which can be modulated by such physicochemical parameters as charge and hydrophobicity. We investigated the structure of dermaseptin B2 (Drs B2) at the aqueous/synthetic solid support interface and its adsorption kinetics using attenuated total reflection Fourier transform infrared spectroscopy and surface plasmon resonance. We determined the conformation and affinity of Drs B2 adsorbed onto negatively charged (silica or dextran) and hydrophobic supports. Synthetic supports of differing hydrophobicity were obtained by modifying silica or gold with omega-functionalized alkylsilanes (bromo, vinyl, phenyl, methyl) or alkylthiols. The peptide molecules adsorbed onto negatively charged supports mostly had a beta-type conformation. In contrast, a monolayer of Drs B2, mainly in the alpha-helical conformation, was adsorbed irreversibly onto the hydrophobic synthetic supports. The conformational changes during formation of the adsorbed monolayer were monitored by two-dimensional Fourier transform infrared spectroscopy correlation; they showed the influence of peptide-peptide interactions on alpha-helix folding on the most hydrophobic support. The orientation of the alpha-helical Drs B2 with respect to the hydrophobic support was determined by polarized attenuated total reflection; it was around 15 +/- 5 degrees. This orientation was confirmed and illustrated by a molecular dynamics study. These combined data demonstrate that specific chemical environments influence the structure of Drs B2, which could explain the many functions of antimicrobial peptides.     

血清白蛋白在多聚阳离子－壳聚糖共混材料表面的构象变化及其与细胞生长的关系

用L-多聚赖氨酸、聚乙烯亚胺及L-多聚鸟氨酸三种多聚阳离子对壳聚糖进行共混修饰,制备了三种共混材料.在这些材料表面吸附了血清白蛋白,并利用圆二色(CD)光谱研究了白蛋白吸附到材料表面后的构象变化.结果显示,与天然状态相比,白蛋白吸附到共混材料表面后,其α-螺旋、β-折叠及无规则卷曲的含量均发生了明显改变.通过研究MC3T3-E1细胞在这些材料表面的生长情况,发现细胞的增殖与血清白蛋白的构象变化有一定关系,在吸附的白蛋白构象与天然构象最接近的共混材料表面,MC3T3-E1细胞增殖水平最高.     

Detergent-induced conformational changes of Humicola lanuginosa lipase studied by fluorescence spectroscopy

Detergent (pentaoxyethylene octyl ether, C(8)E(5))-induced conformational changes of Humicola lanuginosa lipase (HLL) were investigated by stationary and time-resolved fluorescence intensity and anisotropy measurements. Activation of HLL is characterized by opening of a surface loop (the "lid") residing directly over the enzyme active site. The interaction of HLL with C(8)E(5) increases fluorescence intensities, prolongs fluorescence lifetimes, and decreases the values of steady-state anisotropy, residual anisotropy, and the short rotational correlation time. Based on these data, we propose the following model. Already below critical micellar concentration (CMC) the detergent can intercalate into the active site accommodating cleft, while the lid remains closed. Occupation of the cleft by C(8)E(5) also blocks the entry of the monomeric substrate, and inhibition of catalytic activity at [C(8)E(5)] less than or equal to CMC is evident. At a threshold concentration close to CMC the cooperativity of the hydrophobicity-driven binding of C(8)E(5) to the lipase increases because of an increase in the number of C(8)E(5) molecules present in the premicellar nucleates on the hydrophobic surface of HLL. These aggregates contacting the lipase should have long enough residence times to allow the lid to open completely and expose the hydrophobic cleft. Concomitantly, the cleft becomes filled with C(8)E(5) and the "open" conformation of HLL becomes stable.     

Poly(carboxybetaine methacrylamide)-modified nanoparticles: a model system for studying the effect of chain chemistry on film properties, adsorbed protein conformation, and clot formation kinetics

Nonfouling polymer architectures are considered important to the successful implementation of many biomaterials. It is thought that how these polymers induce conformational changes in proteins upon adsorption may dictate the fate of the device being utilized. Herein, oxidized silicon nanoparticles (SiNP) were modified with various forms of poly(carboxybetaine methacrylamide) (PCBMA) for the express purpose of understanding how polymer chemistry affects film hydration, adsorbed protein conformation, and clot formation kinetics. To this end, carboxybetaine monomers differing in intercharge separating spacer groups were synthesized, and nitroxide-mediated free radical polymerization (NMP) was conducted using alkoxyamine initiators with hydrophobic (TEMPO) and hydrophilic (β-phosphonate) terminal groups. The physical properties (surface composition, thickness, grafting density, etc.) of the resulting polymer-SiNP conjugates were quantified using several techniques, including Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), and thermogravimetric analysis (TGA). The effect of spacer group on the surface charge density was determined using zeta potential measurements. Three proteins, viz., lysozyme, bovine α-lactalbumin, and human serum albumin, were used to evaluate the effect film properties (charge, hydration, end-group) have on adsorbed protein conformation, as determined by circular dichroism (CD), fluorescence spectroscopy, and fluorescence quenching techniques. Hemocompatibility of these surfaces was observed by measuring clot formation kinetics using the plasma recalcification time assay. It was found that chain chemistry, as opposed to end-group chemistry, was a major determiner for water structure, adsorbed protein conformation, and clotting kinetics. It is thought that the systematic evaluation of how both chain (internal) and end-group (external) polymer properties affect film hydration, protein conformation, and clot formation will provide valuable insight that can be applied to all engineered surfaces for biomedical applications.     

The antibody–antigen interaction at an aqueous–solid interface: A study by means of polarized infrared ATR spectroscopy

The determination of structural changes in antibodies due to their specific interaction with antigenic proteins is an important problem in understanding immunological responses. The method of polarized ATR infrared spectroscopy applied to protein films adsorbed on an appropriate solid surface can give information about the conformation of the polypeptide chains, as well as their orientation with respect to the surface. The adsorption of anti-rabbit serum albumin onto monomolecular films of rabbit serum albumin, bovine serum albumin, and ovalbumin, and of anti-ovalbumin onto films of rabbit serum albumin and ovalbumin at a Ge-aqueous interface have been studied by this technique. The intensity of the amide I absorption indicates that the strengths of binding of these three albumin proteins with anti-rabbit serum albumin is, under appropriate conditions, in the order rabbit > bovine ? ovalbumin; with anti-ovalbumin, it is ovalbumin ? rabbit. Since the frequencies of the amide I band appear near 1655 cm^?1 for all the proteins and protein complexes studied, the major contributions to their conformation comes from α-helix and random-coil structures. The average orientation of the transition moments of the amide I and A bands has been shown to be about 75° with respect to the surface normal. This indicates that the polypeptides chains are on the average approximately parallel to the surface for all the systems studied. Consequently, the effect of the specific antibody-antigen interaction on the conformation and orientation of the former seems negligible in these films.     

Investigation of Bovine Serum Albumin (BSA) Attachment onto Self-Assembled Monolayers (SAMs) Using Combinatorial Quartz Crystal Microbalance with Dissipation (QCM-D) and Spectroscopic Ellipsometry (SE)

Understanding protein adsorption kinetics to surfaces is of importance for various environmental and biomedical applications. Adsorption of bovine serum albumin to various self-assembled monolayer surfaces including neutral and charged hydrophilic and hydrophobic surfaces was investigated using in-situ combinatorial quartz crystal microbalance with dissipation and spectroscopic ellipsometry. Adsorption of bovine serum albumin varied as a function of surface properties, bovine serum albumin concentration and pH value. Charged surfaces exhibited a greater quantity of bovine serum albumin adsorption, a larger bovine serum albumin layer thickness, and increased density of bovine serum albumin protein compared to neutral surfaces at neutral pH value. The quantity of adsorbed bovine serum albumin protein increased with increasing bovine serum albumin concentration. After equilibrium sorption was reached at pH 7.0, desorption of bovine serum albumin occurred when pH was lowered to 2.0, which is below the isoelectric point of bovine serum albumin. Our data provide further evidence that combinatorial quartz crystal microbalance with dissipation and spectroscopic ellipsometry is a sensitive analytical tool to evaluate attachment and detachment of adsorbed proteins in systems with environmental implications.     

Adsorption equilibrium of proteins on a dye-ligand adsorbent

Summary The effects of pH and ionic strength on adsorption of lysozyme and bovine serum albumin to Blue Sepharose have been studied. Isotherms for both proteins obey the Freundlich model. Lysozyme binding involves both hydrophobic and cation exchange interactions with the adsorbent, while binding of albumin is due primarily to cation exchange. Protein properties will be discussed in relation to the binding patterns.     

Preparation of a novel hydrophobic affinity cryogel for adsorption of lipase and its utilization as a chromatographic adsorbent for fast protein liquid chromatography

In this study, we have prepared a hydrophobic cryogel for the chromatographic separation of lipase from its aqueous solutions including single protein and protein mixture and also Yarrowia lipolytica cell extract. N‐methacryloyl‐(l )‐phenylalanine methyl ester was used as a monomer to provide the hydrophobic character to the prepared cryogels. The highest adsorption capacity was observed at pH 5.0 at 0.5 mL min^?1 flow rate. The chromatographic separation of lipase was achieved from a binary mixture of lipase:bovine serum albumin (BSA) and lipase:lysozyme, and was also achieved from triple‐mixture of lipase:lysozyme:BSA by using fast protein liquid chromatography. Finally, lipase purification was performed from Yarrowia lipolytica cell extract used as a natural source. These studies have shown that the hydrophobic cryogel has good chromatographic performance for the separation and purification of lipase not only from aqueous solution, but also from cell extract as a natural source of lipase. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:376–382, 2014     

Ellipsometry as a tool to study the adsorption behavior of synthetic and biopolymers at the air–water interface

The application of ellipsometry of the study of the adsorption behavior of proteins and synthetic macromolecules at the air-water interface has been investigated. It is shown that for macromolecules the amount adsorbed per unit area, Γ, as determined by ellipsometry, only has a well-defined physical meaning if the refractive-index increment remains constant up to high concentrations present in the adsorbed layer. It has been found experimentally that this conditioned is fulfilled for proteins. The ellipsometric Γ values of some protein agree satisfactorily with those obtained by two independent techniques has been used to investigate the adsorption from solution of κ-casein, bovine serum albumin, and polyvinyl alcohol. For bovine serum albumin, Γ reaches a plateau value of 2.9 mg/m² for concentrations ≥ 0.05 wt%. The thickness of the adsorbed molecules. For κ-casein, Γ steadily increases with increasing centration and multilayers are formed. The technique provides interesting information on conformational changes in adsorbed macromolecules, on the rate of the process, and on the conditions under which these occur.     

PM-IRRAS investigation of the interaction of serum albumin and fibrinogen with a biomedical-grade stainless steel 316LVM surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.     

Reduced protein adsorption at solid interfaces by sugar excipients

Sugar excipients are shown to reduce the adsorption of ribonuclease A, bovine serum albumin, and hen egg white lysozyme at the liquid-solid interface. The amount of protein adsorbed decreased as the concentration of the sugar increased. At the same sugar concentration, the ability of sugars to reduce protein adsorption followed the trend: trisaccharides > disaccharides > 6-carbon polyols > monosaccharides. This trend in adsorbed protein amounts among sugars was explained by stabilization of the protein native state in solution by the sugar excipients. The heat of solution of the amorphous saccharide was found to correlate with the amount of protein adsorbed.     

Adsorption of avidin on microfabricated surfaces for protein biochip applications

The adsorption of the protein avidin from hen egg white on patterns of silicon dioxide and platinum surfaces on a microchip and the use of fluorescent microscopy to detect binding of biotin are described. A silicon dioxide microchip was formed using plasma-enhanced chemical vapor deposition while platinum was deposited using radiofrequency sputtering. After cleaning using a plasma arc, the chips were placed into solutions containing avidin or bovine serum albumin. The avidin was adsorbed onto the microchips from phosphate-buffered saline (PBS) or from PBS to which ammonium sulfate had been added. Avidin was also adsorbed onto bovine serum albumin (BSA)-coated surfaces of oxide and platinum. Fluorescence microscopy was used to confirm adsorption of labeled protein, or the binding of fluorescently labeled biotin onto previously adsorbed, unlabeled avidin. When labeled biotin in PBS was presented to avidin adsorbed onto a BSA-coated microchip, the fluorescence signal was significantly higher than for avidin adsorbed onto the biochip alone. The results show that a simple, low-cost adsorption process can deposit active protein onto a chip in an approach that has potential application in the development of protein biochips for the detection of biological species.     

Real-time analysis of protein adsorption to a variety of thin films

The ability of a fluorescence-based array biosensor to screen surfaces for the adsorption of biomolecules in real-time is demonstrated. Glass microscope slides were coated with silanes, including 3-mercaptopropyl-triethoxysilane, 3-glycidyloxypropyltrimethoxysilane, 3-aminopropyltrimethoxy-silane, octadecyl-trichlorosilane, and 2-methoxy((polyethylenoxy)propyl)tri-methoxysilane, or with polymer thin films, including polystyrene, polyimide, sol-gel, poly(dimethylsiloxane), and agarose. The adsorption of Cy5-labeled proteins, bovine serum albumin, fibrinogen, and lysozyme onto these surfaces was measured using total internal reflection spectroscopy over a period of 50 min. The majority of the modified surfaces, apart from notable exceptions including the thiol silane and PDMS, behaved as expected upon protein adsorption, and the observations could be related to the properties of both the individual surfaces and proteins. This study highlights the complex nature of the mechanisms involved when a protein interacts at a solid-liquid interface. However, it also demonstrates a comparatively generic method with which to screen surfaces for their protein resistant properties and to measure surface interactions in real time. Furthermore, since the array biosensor can perform multiple measurements simultaneously, the interactions of a variety of proteins with a single surface can be monitored.     

Circular dichroism studies on conformational changes in protein molecules upon adsorption on ultrafine polystyrene particles

The conformational changes in well-characterized model proteins [bovine ribonuclease A (RNase A), horseradish peroxidase, sperm-whole myoglobin, human hemoglobin, and bovine serum albumin (BSA)] upon adsorption on ultrafine polystyrene (PS) particles have been studied using circular dichroism (CD) spectroscopy. These proteins were chosen with special attention to molecular flexibility. The ultrafine PS particles were negatively charged and have average diameters of 20 or 30 nm. Utilization of these ultrafine PS particles makes it possible to apply the CD technique to determine the secondary structure of proteins adsorbed on the PS surface. Effects of protein properties and adsorption conditions on the extent of the changes in the secondary structure of protein molecules upon adsorption on ultrafine PS particles were studied. The CD spectrum changes upon adsorption were significant in the "soft" protein molecules (myoglobin, hemoglobin, and BSA), while they were insingnificant in the "rigid" proteins (RNase A and peroxidase). The soft proteins sustained a marked decrease in alpha-helix content upon adsorption. Moreover, the native alpha-helix content, which is given as the percentage of the alpha-helix content in the free proteins, of adsorbed BSA was found to decrease with decreasing pH and increase with increasing adsorbed amount. These observations confirm some well-known hypotheses for the confirmational chages in protein molecules upon adsorption. (c) 1992 John Wiley & Sons, Inc.     

Protein interactions with nanosized hydrotalcites of different composition

Nanosized hydrotalcite-like compounds (HTlc) with different chemical composition were prepared and used to study protein adsorption. Two soft proteins, myoglobin (Mb) and bovine serum albumin (BSA), were chosen to investigate the nature of the forces controlling the adsorption and how these depend on the chemical composition of the support. Both proteins strongly interact with HTlc exhibiting in most cases a Langmuir-type adsorption. Mb showed a higher affinity for Nickel Chromium (NiCr-HTlc) than for Nickel Aluminum (NiAl-HTlc), while for BSA no significant differences between supports were found. Adsorption experiments in the presence of additives showed that proteins exhibited different types of interactions onto the same HTlc surface and that the adsorption was strongly suppressed by the addition of disodium hydrogen phosphate (Na₂HPO₄). Atomic force microscopy images showed that the adsorption of both proteins onto nanoparticles was followed by the aggregation of biocomposites, with a more disordered structure for BSA. Fluorescence measurements for adsorbed Mb showed that the inorganic nanoparticles induced conformational changes in the biomolecules; in particular, the interactions with HTlc surface quenched the tryptophan fluorescence and this process was particularly efficient for NiCr-HTlc. The adsorption of BSA onto the HTlc nanoparticles induced a selective quenching of the exposed fluorescent residues, as indicated by the blue-shift of the emission spectra of tryptophan residues and by the shortening of the fluorescence decay times.     

Comparison of the adsorbed conformation of barley lipid transfer protein at the decane-water and vacuum-water interface: a molecular dynamics simulation

Molecular dynamics simulation is used to model the adsorption of the barley lipid transfer protein (LTP) at the decane-water and vacuum-water interfaces. Adsorption at both surfaces is driven by displacement of water molecules from the interfacial region. LTP adsorbed at the decane surface exhibits significant changes in its tertiary structure, and penetrates a considerable distance into the decane phase. At the vacuum-water interface LTP shows small conformational changes away from its native structure and does not penetrate into the vacuum space. Modification of the conformational stability of LTP by reduction of its four disulphide bonds leads to an increase in conformational entropy of the molecules, which reduces the driving force for adsorption. Evidence for changes in the secondary structure are also observed for native LTP at the decane-water interface and reduced LTP at the vacuum-water interface. In particular, intermittent formation of short (six-residue) regions of beta-sheet is found in these two systems. Formation of interfacial beta-sheet in adsorbed proteins has been observed experimentally, notably in the globular milk protein beta-lactoglobulin and lysozyme.