Protein ligation in living cells using sortase

Sortagging is a versatile method for site‐specific modification of proteins as applied to a variety of in vitro reactions. Here, we explore possibilities of adapting the sortase method for use in living cells. For intracellular sortagging, we employ the Ca²⁺‐independent sortase A transpeptidase (SrtA) from Streptococcus pyogenes. Substrate proteins were equipped with the C‐terminal sortase‐recognition motif (LPXTG); we used proteins with an N‐terminal (oligo)glycine as nucleophiles. We show that sortase‐dependent protein ligation can be achieved in Saccharomyces cerevisiae and in mammalian HEK293T cells, both in the cytosol and in the lumen of the endoplasmic reticulum (ER). ER luminal sortagging enables secretion of the reaction products, among which circular polypeptides. Protein ligation of substrate and nucleophile occurs within 30 min of translation. The versatility of the method is shown by protein ligation of multiple substrates with green fluorescent protein‐based nucleophiles in different intracellular compartments.     

Functional analysis of the sortase YhcS in Bacillus subtilis

Sortases of Gram-positive bacteria catalyze the covalent C-terminal anchoring of proteins to the cell wall. Bacillus subtilis, a well-known host organism for protein production, contains two putative sortases named YhcS and YwpE. The present studies were aimed at investigating the possible sortase function of these proteins in B. subtilis. Proteomics analyses revealed that sortase-mutant cells released elevated levels of the putative sortase substrate YfkN into the culture medium upon phosphate starvation. The results indicate that YfkN required sortase activity of YhcS for retention in the cell wall. To analyze sortase function in more detail, we focused attention on the potential sortase substrate YhcR, which is co-expressed with the sortase YhcS. Our results showed that the sortase recognition and cell-wall-anchoring motif of YhcR is functional when fused to the Bacillus pumilus chitinase ChiS, a readily detectable reporter protein that is normally secreted. The ChiS fusion protein is displayed at the cell wall surface when YhcS is co-expressed. In the absence of YhcS, or when no cell-wall-anchoring motif is fused to ChiS, the ChiS accumulates predominately in the culture medium. Taken together, these novel findings show that B. subtilis has a functional sortase for anchoring proteins to the cell wall.     

Self-assembling protein arrays on DNA chips by auto-labeling fusion proteins with a single DNA address

The high-throughput deposition of recombinant proteins on chips, beads or biosensor devices would be greatly facilitated by the implementation of self-assembly concepts. DNA-directed immobilization via conjugation of proteins to an oligonucleotide would be preeminently suited for this purpose. Here, we present a unique method to attach a single DNA address to proteins in one step during the purification from the E. coli lysate by fusion to human O6-alkylguanine-DNA-alkyltransferase (SNAP-tag) and the Avitag. Use of the conjugates in converting a DNA chip into a protein chip by self assembly is demonstrated.     

A novel sortase, SrtC2, from Streptococcus pyogenes anchors a surface protein containing a QVPTGV motif to the cell wall

The important human pathogen Streptococcus pyogenes (group A streptococcus GAS), requires several surface proteins to interact with its human host. Many of these are covalently linked by a sortase enzyme to the cell wall via a C-terminal LPXTG motif. This motif is followed by a hydrophobic region and charged C terminus, which are thought to retard the protein in the cell membrane to facilitate recognition by the membrane-localized sortase. Previously, we identified two sortase enzymes in GAS. SrtA is found in all GAS strains and anchors most proteins containing LPXTG, while SrtB is present only in some strains and anchors a subset of LPXTG-containing proteins. We now report the presence of a third sortase in most strains of GAS, SrtC. We show that SrtC mediates attachment of a protein with a QVPTGV motif preceding a hydrophobic region and charged tail. We also demonstrate that the QVPTGV sequence is a substrate for anchoring of this protein by SrtC. Furthermore, replacing this motif with LPSTGE, found in the SrtA-anchored M protein of GAS, leads to SrtA-dependent secretion of the protein but does not lead to its anchoring by SrtA. We conclude that srtC encodes a novel sortase that anchors a protein containing a QVPTGV motif to the surface of GAS.     

Characterization of the sortase repertoire in Bacillus anthracis

LPXTG proteins, present in most if not all Gram-positive bacteria, are known to be anchored by sortases to the bacterial peptidoglycan. More than one sortase gene is often encoded in a bacterial species, and each sortase is supposed to specifically anchor given LPXTG proteins, depending of the sequence of the C-terminal cell wall sorting signal (cwss), bearing an LPXTG motif or another recognition sequence. B. anthracis possesses three sortase genes. B. anthracis sortase deleted mutant strains are not affected in their virulence. To determine the sortase repertoires, we developed a genetic screen using the property of the gamma phage to lyse bacteria only when its receptor, GamR, an LPXTG protein, is exposed at the surface. We identified 10 proteins that contain a cell wall sorting signal and are covalently anchored to the peptidoglycan. Some chimeric proteins yielded phage lysis in all sortase mutant strains, suggesting that cwss proteins remained surface accessible in absence of their anchoring sortase, probably as a consequence of membrane localization of yet uncleaved precursor proteins. For definite assignment of the sortase repertoires, we consequently relied on a complementary test, using a biochemical approach, namely immunoblot experiments. The sortase anchoring nine of these proteins has thus been determined. The absence of virulence defect of the sortase mutants could be a consequence of the membrane localization of the cwss proteins.     

Protein sorting to the cell wall envelope of Gram-positive bacteria

The covalent anchoring of surface proteins to the cell wall envelope of Gram-positive bacteria occurs by a universal mechanism requiring sortases, extracellular transpeptidases that are positioned in the plasma membrane. Surface protein precursors are first initiated into the secretory pathway of Gram-positive bacteria via N-terminal signal peptides. C-terminal sorting signals of surface proteins, bearing an LPXTG motif or other recognition sequences, provide for sortase-mediated cleavage and acyl enzyme formation, a thioester linkage between the active site cysteine residue of sortase and the C-terminal carboxyl group of cleaved surface proteins. During cell wall anchoring, sortase acyl enzymes are resolved by the nucleophilic attack of peptidoglycan substrates, resulting in amide bond formation between the C-terminal end of surface proteins and peptidoglycan cross-bridges within the bacterial cell wall envelope. The genomes of Gram-positive bacteria encode multiple sortase genes. Recent evidence suggests that sortase enzymes catalyze protein anchoring reactions of multiple different substrate classes with different sorting signal motif sequences, protein linkage to unique cell wall anchor structures as well as protein polymerization leading to the formation of pili on the surface of Gram-positive bacteria.     

Site-specific protein labeling with amine-containing molecules using Lactobacillus plantarum sortase

Modification of proteins with small molecules is a widely used and powerful tool in biological research. Enzymatic approaches are particularly promising because substrate specificity allows for site-specific modification. Sortase A, a transpeptidase from Staphylococcus aureus, cleaves between the T and G residues in the sequence LPXTG, and subsequently links the carboxyl group of the T residue to an amino group of N-terminal glycine oligomers by a native peptide bond. Although Gram-positive bacteria have several kinds of sortases, there are few reports concerning their expression and substrate specificity. Here, we demonstrate site-specific protein modification with primary amine-containing molecules catalyzed by Lactobacillus plantarum sortase. Enhanced green fluorescent protein (EGFP) was employed as a model protein, and an amine-containing biotin molecule was site-specifically conjugated with LPQTSEQ-tagged EGFP. We developed a novel Lactobacillus plantarum sortase that has different substrate specificity compared to Staphylococcus aureus sortase. Amine-directed protein modification was achieved using the Lactobacillus plantarum sortase 'LPQTSEQ' sequence original recognition tag. Our results demonstrate a promising method for expanding the capabilities of site-specific protein-small molecule modification.     

A sweet new role for LCP enzymes in protein glycosylation

The peptidoglycan that surrounds Gram‐positive bacteria is affixed with a range of macromolecules that enable the microbe to effectively interact with its environment. Distinct enzymes decorate the cell wall with proteins and glycopolymers. Sortase enzymes covalently attach proteins to the peptidoglycan, while LytR‐CpsA‐Psr (LCP) proteins are thought to attach teichoic acid polymers and capsular polysaccharides. Ton‐That and colleagues have discovered a new glycosylation pathway in the oral bacterium Actinomyces oris in which sortase and LCP enzymes operate on the same protein substrate. The A. oris LCP protein has a novel function, acting on the cell surface to transfer glycan macromolecules to a protein, which is then attached to the cell wall by a sortase. The reactions are tightly coupled, as elimination of the sortase causes the lethal accumulation of glycosylated protein in the membrane. Since sortase enzymes are attractive drug targets, this novel finding may provide a convenient cell‐based tool to discover inhibitors of this important enzyme family.     

Anchoring of surface proteins to the cell wall of Staphylococcus aureus. Sortase catalyzed in vitro transpeptidation reaction using LPXTG peptide and NH(2)-Gly(3) substrates

Staphylococcus aureus sortase anchors surface proteins to the cell wall envelope by cleaving polypeptides at the LPXTG motif. Surface proteins are linked to the peptidoglycan by an amide bond between the C-terminal carboxyl and the amino group of the pentaglycine cross-bridge. We find that purified recombinant sortase hydrolyzed peptides bearing an LPXTG motif at the peptide bond between threonine and glycine. In the presence of NH(2)-Gly(3), sortase catalyzed exclusively a transpeptidation reaction, linking the carboxyl group of threonine to the amino group of NH(2)-Gly(3). In the presence of amino group donors the rate of sortase mediated cleavage at the LPXTG motif was increased. Hydrolysis and transpeptidation required the sulfhydryl of cysteine 184, suggesting that sortase catalyzed the transpeptidation reaction of surface protein anchoring via the formation of a thioester acyl-enzyme intermediate.     

Differential recognition of surface proteins in Streptococcus pyogenes by two sortase gene homologs

The interaction of Streptococcus pyogenes (group A streptococcus [GAS]) with its human host requires several surface proteins. In this study, we isolated mutations in a gene required for the surface localization of protein F by transposon mutagenesis of the M6 strain JRS4. This gene (srtA) encodes a protein homologous to Staphylococcus aureus sortase, which covalently links proteins containing an LPXTG motif to the cell wall. The GAS srtA mutant was defective in anchoring the LPXTG-containing proteins M6, protein F, ScpA, and GRAB to the cell surface. This phenotype was complemented when a wild-type srtA gene was provided in trans. The surface localization of T6, however, was unaffected by the srtA mutation. The M1 genome sequence contains a second open reading frame with a motif characteristic of sortase proteins. Inactivation of this gene (designated srtB) in strain JRS4 affected the surface localization of T6 but not M6, protein F, ScpA, or GRAB. This phenotype was complemented by srtB in trans. An srtA probe hybridized with DNA from all GAS strains tested (M types 1, 3, 4, 5, 6, 18, 22, and 50 and nontypeable strain 64/14) and from streptococcal groups C and G, while srtB hybridized with DNA from only a few GAS strains. We conclude that srtA and srtB encode sortase enzymes required for anchoring different subsets of proteins to the cell wall. It seems likely that the multiple sortase homologs in the genomes of other gram-positive bacteria have a similar substrate-specific role.     

Enzymatic activity of circular sortase A under denaturing conditions: An advanced tool for protein ligation

Staphylococcus aureus sortase A is a transpeptidase that is extensively used in various protein research applications. Sortase A is highly selective and does not require any cofactors for the catalysis of protein ligation and, importantly, can be produced in high yields. However, the primary disadvantage of this transpeptidase is its inability to access the recognition site within the highly structured regions of folded substrates. To overcome this problem, we developed an Escherichia coli expression system that produces milligram quantities of circularly closed sortase A; efficient enzyme cyclization was achieved by Synechocystis sp. PCC6803 intein-mediated post-translational splicing. The structural integrity of circular sortase A and its biochemical characteristics were compared to those of the linear enzyme analog and were found to be similar under native conditions. Additionally, the modified sortase was active at concentrations of urea up to 3 M and was capable of efficient catalytic protein–protein coupling, as shown by the ligation of purified glutathione-S-transferase and green fluorescence protein. In contrast to the circular enzyme, linear sortase A was unable to mediate the ligation of substrate proteins under the same conditions. Therefore, the proposed circular sortase A has improved enzymatic properties and has applications in advanced protein engineering and design.     

Sugar Chips immobilized with synthetic sulfated disaccharides of heparin/heparan sulfate partial structure

Carbohydrate chip technology has a great potential for the high-throughput evaluation of carbohydrate-protein interactions. Herein, we report syntheses of novel sulfated oligosaccharides possessing heparin and heparan sulfate partial disaccharide structures, their immobilization on gold-coated chips to prepare array-type Sugar Chips, and evaluation of binding potencies of proteins by surface plasmon resonance (SPR) imaging technology. Sulfated oligosaccharides were efficiently synthesized from glucosamine and uronic acid moieties. Synthesized sulfated oligosaccharides were then easily immobilized on gold-coated chips using previously reported methods. The effectiveness of this analytical method was confirmed in binding experiments between the chips and heparin binding proteins, fibronectin and recombinant human von Willebrand factor A1 domain (rh-vWf-A1), where specific partial structures of heparin or heparan sulfate responsible for binding were identified.     

Analysis of the substrate specificity of the Staphylococcus aureus sortase transpeptidase SrtA

The Staphylococcus aureus sortase transpeptidase SrtA isoform is responsible for the covalent attachment of virulence and colonization-associated proteins to the bacterial peptidoglycan. SrtA utilizes two substrates, undecaprenol-pyrophosphoryl-MurNAc(GlcNAc)-Ala-D-isoGlu-Lys(epsilon-Gly(5))-D-Ala-D-Ala (branched Lipid II) and secreted proteins containing a highly conserved C-terminal LPXTG sequence. SrtA simultaneously cleaves the Thr-Gly bond of the LPXTG-containing protein and forms a new amide bond with the nucleophilic amino group of the Gly(5) portion of branched Lipid II, anchoring the protein to this key intermediate that is subsequently polymerized into peptidoglycan. Here we describe the development of a general in vitro method for elucidating the substrate specificity of sortase enzymes. In addition, using immunofluorescence, cell adhesion assays, and transmission electron microscopy, we establish links between in vitro substrate specificity and in vivo function of the S. aureus sortase isoforms. Results from these studies provide strong supporting evidence of a primary role of the SrtA isoform in S. aureus adhesion and host colonization, illustrate a lack of specificity cross talk between SrtA and SrtB isoforms, and highlight the potential of SrtA as a target for the development of antivirulence chemotherapeutics against Gram-positive bacterial pathogens.     

Domain selective labeling for NMR studies of multidomain proteins by domain ligation using highly active sortase A

Structural study of multidomain proteins using NMR is an emerging issue for understanding biological functions. To this end, domain-specific labeling is expected to be a key technology for facilitating the NMR-assignment process and for collecting distance information via spin labeling. To obtain domain-specific labeled samples, use of sortase A as a protein ligation tool is a viable approach. Sortase A enables ligation of separately expressed proteins (domains) through the Leu-Pro-X-Thr-Gly linker. However, the ligation reaction mediated by sortase A is not efficient. Poor yield and long reaction times hamper large-scale preparation using sortase A. Here we report the application of highly active sortases to NMR analyses. Optimal yields can be achieved within several hours when the ligation reaction are mediated by highly active sortases at 4 °C. We propose that this protocol can contribute to structural analyses of multidomain proteins by NMR.     

Architects at the bacterial surface - sortases and the assembly of pili with isopeptide bonds

The cell wall envelope of Gram-positive bacteria can be thought of as a surface organelle for the assembly of macromolecular structures that enable the unique lifestyle of each microorganism. Sortases - enzymes that cleave the sorting signals of secreted proteins to form isopeptide (amide) bonds between the secreted proteins and peptidoglycan or polypeptides - function as the principal architects of the bacterial surface. Acting alone or with other sortase enzymes, sortase construction leads to the anchoring of surface proteins at specific sites in the envelope or to the assembly of pili, which are fibrous structures formed from many protein subunits. The catalysis of intermolecular isopeptide bonds between pilin subunits is intertwined with the assembly of intramolecular isopeptide bonds within pilin subunits. Together, these isopeptide bonds endow these sortase products with adhesive properties and resistance to host proteases.     

Sortase A mediated site‐specific immobilization for identification of protein interactions in affinity purification–mass spectrometry experiments

Proteomics approaches using MS in combination with affinity purification have emerged as powerful tools to study protein‐protein interactions. Here we make use of the specificity of sortase A transpeptidation reaction to prepare affinity matrices in which a protein bait is covalently linked to the matrix via a short C‐terminal linker region. As a result of this site‐directed immobilization, the bait remains functionally accessible to protein interactions. To apply this approach, we performed SILAC‐based pull‐down experiments and demonstrate the suitability of the approach.     

Observing selected domains in multi-domain proteins via sortase-mediated ligation and NMR spectroscopy

NMR spectroscopy has distinct advantages for providing insight into protein structures, but faces significant resolution challenges as protein size increases. To alleviate such resonance overlap issues, the ability to produce segmentally labeled proteins is beneficial. Here we show that the S. aureus transpeptidase sortase A can be used to catalyze the ligation of two separately expressed domains of the same protein, MecA (B. subtilis). The yield of purified, segmentally labeled MecA protein conjugate is ~40%. The resultant HSQC spectrum obtained from this domain-labeled conjugate demonstrates successful application of sortase A for segmental labeling of multi-domain proteins for solution NMR study.     

Cell immobilization studies using a cellulose-binding domain fused to PrtP in Lactococcus lactis

The cellulose-binding domain (CBD) of XylA was fused with PrtP, NisP and AcmA anchors derived from Lactococcus lactis under P45 promoter and Usp45 secretion signal. The fusion construct with the anchor PrtP (334 aa) was shown to exhibit the most efficient immobilization. The CBD-PrtP construct on the other hand was not efficiently attached to the cell wall and as such was found mainly in the supernatant. Results also showed that expression of the CBD-NisP anchor fusion led to a similar result. This raised the question if more efficient binding of the anchor to the cell wall by sortase could enhance the efficiency of cell immobilization to the cellulosic material. However, expressing sortase with the CBD-PrtP fusion did not improve the immobilization of the cells to cellulose.     

An embarrassment of sortases - a richness of substrates?

A range of surface proteins is anchored to the cell walls of Gram-positive pathogens such as Staphylococcus aureus by the transpeptidase sortase. Until now, sortase-like proteins and their substrates appeared to be limited mainly to such pathogens. However, by searching for sortase homologues among complete and incomplete genome sequences, we have found them to be present in almost all Gram-positives, a single Gram-negative bacterium and an archaean. There is usually more than one sortase-like protein encoded in each Gram-positive genome, and the genes encoding the sortase-like proteins are often clustered with genes encoding their likely substrates.     

蛋白质芯片构建技术进展

蛋白质芯片是一项实现蛋白质高通量分析和检测的新型技术,在生命科学的各个领域具有重要的应用前景。但是由于蛋白质本身的敏感性质和芯片的独特结构,蛋白质芯片技术的发展面临许多难点,这些正是蛋白质芯片研究者需要共同讨论的问题。本文从芯片构造、探针的固定方法和检测方法三个方面对芯片的构造进行分析和讨论,并对其相关技术的进展进行综述。