To what extent does a minimal atherosclerotic plaque alter the arterial wall shear stress distribution? A model study by an electrochemical method

An electrochemical surface shear stress measurement was applied to a model of very thin unilateral arterial stenosis (height of 1/8 of the model pipe diameter with very smooth surface). Three dimensional wall shear stress distribution was measured under steady flow field from a relatively low Reynolds number, Re = 270, to a high Reynolds number, Re = 1200. There was a characteristic high and low wall shear distribution pattern around the stenosis. There were also remarkable high shear stress areas on the opposite wall and both side walls of the stenosis. It was clearly shown that three dimensional structure of the flow field, hence, the wall shear stress distribution, is affected by a minimal change on the arterial wall.     

Experimental and numerical study of pulsatile flows through stenosis: wall shear stress analysis.

Different shapes of pulsatile flows through a model of stenosis are experimentally and numerically modeled to validate both methods and to determine the wall shear stress temporal evolution downstream from the stenosis. Two-dimensional velocity measurements are performed in a 75% severity stenosis using a pulsed Doppler ultrasonic velocimeter. Finite element package is employed for the transient numerical simulations. Polynomial method, based on the experimental velocity values, is proposed to determine the wall shear stress temporal evolution. There is a good agreement between the numerical and experimental results. The wall shear stress temporal analysis shows oscillating wall shear stress values during the cycle with high wall shear stress values at the throat of about 120 dyn/cm2, and low values downstream from the stenosis of about - 2.5 dyn/cm2. The key result of the study is that the presence of the stenosis leads the artery to work in a direction which is opposite to the direction of a healthy artery.     

Influence of stenosis on hemodynamic parameters in the realistic left coronary artery under hyperemic conditions

The current study investigates the hyperemic flow effects on heamodynamics parameters such as velocity, wall shear stress in 3D coronary artery models with and without stenosis. The hyperemic flow is used to evaluate the functional significance of stenosis in the current era. Patients CT scan data of having healthy and coronary artery disease was chosen for the reconstruction of 3D coronary artery models. The diseased 3D models of coronary artery shows a narrowing of >50% lumen area. Computational fluid dynamics was performed to simulate the hyperemic flow condition. The results showed that the recirculation zone was observed immediate to the stenosis and highest wall shear stress was observed across the stenosis. The decrease in pressure was found downstream to the stenosis as compared to the coronary artery without stenosis. Our analysis provides an insight into the distribution of wall shear stress and pressure drop, thus improving our understanding of hyperemic flow effect under both conditions.     

Direct numerical simulation of transitional flow in a stenosed carotid bifurcation

The blood flow dynamics of a stenosed, subject-specific, carotid bifurcation were numerically simulated using the spectral element method. Pulsatile inlet conditions were based on in vivo color Doppler ultrasound measurements of blood velocity. The results demonstrated the transitional or weakly turbulent state of the blood flow, which featured rapid velocity and pressure fluctuations in the post-stenotic region of the internal carotid artery (ICA) during systole and laminar flow during diastole. High-frequency vortex shedding was greatest downstream of the stenosis during the deceleration phase of systole. Velocity fluctuations had a frequency within the audible range of 100-300Hz. Instantaneous wall shear stress (WSS) within the stenosis was relatively high during systole ( approximately 25-45Pa) compared to that in a healthy carotid. In addition, high spatial gradients of WSS were present due to flow separation on the inner wall. Oscillatory flow reversal and low pressure were observed distal to the stenosis in the ICA. This study predicts the complex flow field, the turbulence levels and the distribution of the biomechanical stresses present in vivo within a stenosed carotid artery.     

Effects of wall shear stress and fluid recirculation on the localization of circulating monocytes in a three-dimensional flow model

There is a correlation between the location of early atherosclerotic lesions and the hemodynamic characteristics at those sites. Circulating monocytes are key cells in the pathogenesis of atherosclerotic plaques and localize at sites of atherogenesis. The hypothesis that the distribution of monocyte adhesion to the vascular wall is determined in part by hemodynamic factors was addressed by studying monocyte adhesion in an in vitro flow model in the absence of any biological activity in the model wall.

Suspensions of U937 cells were perfused (Re = 200) through an axisymmetric silicone flow model with a stenosis followed by a reverse step. The model provided spatially varying wall shear stress, flow separation and reattachment, and a three-dimensional flow pattern. The cell rolling velocity and adhesion rates were determined by analysis of videomicrographs. Wall shear stress was obtained by numerical solution of the equations of fluid motion. Cell adhesion patterns were also studied in the presence of chemotactic peptide gradients.

The cell rolling velocity varied linearly with wall shear stress. The adhesion rate tended to decrease with increasing local wall shear stress, but was also affected by the radial component of velocity and the dynamics of the recirculation region and flow reattachment. Adhesion was increased in the vicinity of chemotactic peptide sources downstream of the expansion site. Results with human monocytes were qualitatively similar to the U937 experiments.

Differences in the adhesion rates of U937 cells occurring solely as a function of the fluid dynamic properties of the flow field were clearly demonstrated in the absence of any biological activity in the model wall.     

Simulation of particle-hemodynamics in a partially occluded artery segment with implications to the initiation of microemboli and secondary stenoses.

Computational results of laminar incompressible blood-particle flow analyses in an axisymmetric artery segment with a smooth local area constriction of 75 percent have been presented. The flow input waveform was sinusoidal with a nonzero average. The non-Newtonian behavior of blood was simulated with a modified Quemada model, platelet concentrations were calculated with a drift-flux model, and monocyte trajectories were described and compared for both Newtonian and Quemada rheologies. Indicators of "disturbed flow" included the time-averaged wall shear stress (WSS), the oscillatory shear index (OSI), and the wall shear stress gradient (WSSG). Implications of the vortical flow patterns behind the primary stenosis to the formation of microemboli and downstream stenoses are as follows. Elevated platelet concentrations due to accumulation in recirculation zones mixed with thrombin and ADP complexes assumed to be released upstream in high wall shear stress regions, could form microemboli, which are convected downstream. Distinct near-wall vortices causing a local increase in the WSSG and OSI as well as blood-particle entrainment with possible wall deposition, indicate sites susceptible to the onset of an additional stenosis proximal to the initial geometric disturbance.     

Computer modeling of fluid dynamics related to a myocardial bridge in a coronary artery

Fluid mechanics associated with blood flows induced by the so-called myocardial bridge (MB) has been studied systematically using a computational fluid dynamic modeling of the Newtonian, incompressible, two-dimensional, unsteady flow in a channel with a time-dependently flushing in/out indentation. During each cycle, a train of vortex wave flow was observed downstream of the phasic stenosis and both upper and lower walls suffer severely from consistently high, oscillating wall shear stresses (WSS). Extensive studies were conducted on the influence of the Reynolds number, the geometry and the Strouhal number of the MB movement on the nature of the vortex flow and the time-dependent wall shear stress distribution. Special attention was drawn to the relationship between the vortex wave and the pressure distribution. It was found that the pressure gradient changed markedly during one cycle, which was apparently dominated by the dynamics of the indentation. A steep, adverse pressure gradient was observed when the indentation was flushing out, which corresponded to the existence of the most developing vortices. It implies the possibility that the MB in a coronary artery can produce an extremely low pressure region immediately downstream of the phasic stenosis, where elastic choking or collapse of the coronary artery might occur.     

A nonlinear axisymmetric model with fluid-wall interactions for steady viscous flow in stenotic elastic tubes.

Arteries with high-grade stenoses may compress under physiologic conditions due to negative transmural pressure caused by high-velocity flow passing through the stenoses. To quantify the compressive conditions near the stenosis, a nonlinear axisymmetric model with fluid-wall interactions is introduced to simulate the viscous flow in a compliant stenotic tube. The nonlinear elastic properties of the tube (tube law) are measured experimentally and used in the model. The model is solved using ADINA (Automatic Dynamic Incremental Nonlinear Analysis), which is a finite element package capable of solving problems with fluid-structure interactions. Our results indicate that severe stenoses cause critical flow conditions such as negative pressure and high and low shear stresses, which may be related to artery compression, plaque cap rupture, platelet activation, and thrombus formation. The pressure filed near a stenosis has a complex pattern not seen in one-dimensional models. Negative transmural pressure as low as -24 mmHg for a 78 percent stenosis by diameter is observed at the throat of the stenosis for a downstream pressure of 30 mmHg. Maximum shear stress as a high as 1860 dyn/cm2 occurs at the throat of the stenoses, while low shear stress with reversed direction is observed right distal to the stenosis. Compressive stresses are observed inside the tube wall. The maximal principal stress and hoop stress in the 78 percent stenosis are 80 percent higher than that from the 50 percent stenosis used in our simulation. Flow rates under different pressure drop conditions are calculated and compared with experimental measurements and reasonable agreement is found for the prebuckling stage.     

Numerical 3D-simulation of pulsatile wall shear stress in an arterial T-bifurcation model

The structure of pulsatile blood flow and wall shear stress in a 90° T-bifurcation model is analysed numerically. The nonlinear Navier-Stokes equations for time-dependent incompressible Newtonian fluid flow are approximated using a newly developed pressure correction, finite element method. The wall shear stress is calculated from the finite element velocity field. The investigation shows viscous flow phenomena such as flow separation and stagnation and the distribution of high and low wall shear stress during the pulse cycle. Furthermore, the effect of a sharp corner the bifurcation edge on the wall shear stress is analysed. Detailed local flow investigation is required to examine fluid dynamic contribution to the development of arterial diseases such as atherosclerosis and thrombosis.     

Computational study of the effect of geometric and flow parameters on the steady flow field at the rabbit aorto-celiac bifurcation

Arterial hemodynamic forces may play a role in the localization of early atherosclerotic lesions. We have been developing numerical techniques based on overset or "Chimera" type formulations to solve the Navier-Stokes equations in complex geometries simulating arterial bifurcations. This paper presents three-dimensional steady flow computations in a model of the rabbit aorto-celiac bifurcation. The computational methods were validated by comparing the numerical results to previously-obtained flow visualization data. Once validated, the numerical algorithms were used to investigate the sensitivity of the computed flow field and resulting wall shear stress distribution to various geometric and hemodynamic parameters. The results demonstrated that a decrease in the extent of aortic taper downstream of the celiac artery induced looping fluid motion along the lateral walls of the aorta and shifted the peak wall shear stress from downstream of the celiac artery to upstream. Increasing the flow Reynolds number led to a sharp increase in spatial gradients of wall shear stress. The flow field was highly sensitive to the flow division ratio, i.e., the fraction of total flow rate that enters the celiac artery, with larger values of this ratio leading to the occurrence of flow separation along the dorsal wall of the aorta. Finally, skewness of the inlet velocity profile had a profound impact on the wall shear stress distribution near the celiac artery. While not physiological due to the assumption of steady flow, these results provide valuable insight into the fluid physics at geometries simulating arterial bifurcations.     

Turbulence modeling in three-dimensional stenosed arterial bifurcations

Under normal healthy conditions, blood flow in the carotid artery bifurcation is laminar. However, in the presence of a stenosis, the flow can become turbulent at the higher Reynolds numbers during systole. There is growing consensus that the transitional k-omega model is the best suited Reynolds averaged turbulence model for such flows. Further confirmation of this opinion is presented here by a comparison with the RNG k-epsilon model for the flow through a straight, nonbifurcating tube. Unlike similar validation studies elsewhere, no assumptions are made about the inlet profile since the full length of the experimental tube is simulated. Additionally, variations in the inflow turbulence quantities are shown to have no noticeable affect on downstream turbulence intensity, turbulent viscosity, or velocity in the k-epsilon model, whereas the velocity profiles in the transitional k-omega model show some differences due to large variations in the downstream turbulence quantities. Following this validation study, the transitional k-omega model is applied in a three-dimensional parametrically defined computer model of the carotid artery bifurcation in which the sinus bulb is manipulated to produce mild, moderate, and severe stenosis. The parametric geometry definition facilitates a powerful means for investigating the effect of local shape variation while keeping the global shape fixed. While turbulence levels are generally low in all cases considered, the mild stenosis model produces higher levels of turbulent viscosity and this is linked to relatively high values of turbulent kinetic energy and low values of the specific dissipation rate. The severe stenosis model displays stronger recirculation in the flow field with higher values of vorticity, helicity, and negative wall shear stress. The mild and moderate stenosis configurations produce similar lower levels of vorticity and helicity.     

Numerical analysis of flow through a severely stenotic carotid artery bifurcation

The results of computational simulations may supplement MR and other in vivo diagnostic techniques to provide an accurate picture of the hemodynamics in particular vessels, which may help demonstrate the risks of embolism or plaque rupture posed by particular plaque deposits. In this study, a model based on an endarterectomy specimen of the plaque in a carotid bifurcation was examined. The flow conditions include steady flow at Reynolds numbers of 300, 600, and 900 as well as unsteady pulsatile flow. Both dynamic pressure and wall shear stress are very high, with shear values up to 70 N/m2, proximal to the stenosis throat in the internal carotid artery, and both vary significantly through the flow cycle. The wall shear stress gradient is also strong along the throat. Vortex shedding is observed downstream of the most severe occlusion. Two turbulence models, the Chien and Goldberg varieties of k-epsilon, are tested and evaluated for their relevance in this geometry. The Chien model better captures phenomena such as vortex shedding. The flow distal to stenosis is likely transitional, so a model that captures both laminar and turbulent behavior is needed.     

Wall shear stress distribution in the human carotid siphon during pulsatile flow

Wall shear stress distribution in the carotid siphon, which is a multiple curved segment of the internal carotid artery, is investigated numerically under physiological flow conditions. The computer simulation of flow through the model segment is based on the time-dependent, three-dimensional Navier-Stokes equations, solved numerically with a finite element method. The study shows the behavior of the wall shear stress-vector field and identifies the zones of high and low wall shear stress values during the cardiac cycle.     

Numerical modeling of pulsatile turbulent flow in stenotic vessels

Pulsatile turbulent flow in stenotic vessels has been numerically modeled using the Reynolds-averaged Navier-Stokes equation approach. The commercially available computational fluid dynamics code (CFD), FLUENT, has been used for these studies. Two different experiments were modeled involving pulsatile flow through axisymmetric stenoses. Four different turbulence models were employed to study their influence on the results. It was found that the low Reynolds number k-omega turbulence model was in much better agreement with previous experimental measurements than both the low and high Reynolds number versions of the RNG (renormalization-group theory) k-epsilon turbulence model and the standard k-epsilon model, with regard to predicting the mean flow distal to the stenosis including aspects of the vortex shedding process and the turbulent flow field. All models predicted a wall shear stress peak at the throat of the stenosis with minimum values observed distal to the stenosis where flow separation occurred.     

Large deforming buoyant embolus passing through a stenotic common carotid artery: a computational simulation

Arterial embolism is responsible for the death of lots of people who suffers from heart diseases. The major risk of embolism in upper limbs is that the ruptured particles are brought into the brain, thus stimulating neurological symptoms or causing the stroke. We presented a computational model using fluid-structure interactions (FSI) to investigate the physical motion of a blood clot inside the human common carotid artery. We simulated transportation of a buoyant embolus in an unsteady flow within a finite length tube having stenosis. Effects of stenosis severity and embolus size on arterial hemodynamics were investigated. To fulfill realistic nonlinear property of a blood clot, a rubber/foam model was used. The arbitrary Lagrangian-Eulerian formulation (ALE) and adaptive mesh method were used inside fluid domain to capture the large structural interfacial movements. The problem was solved by simultaneous solution of the fluid and the structure equations. Stress distribution and deformation of the clot were analyzed and hence, the regions of the embolus prone to lysis were localized. The maximum magnitude of arterial wall shear stress during embolism occurred at a short distance proximal to the throat of the stenosis. Through embolism, arterial maximum wall shear stress is more sensitive to stenosis severity than the embolus size whereas role of embolus size is more significant than the effect of stenosis severity on spatial and temporal gradients of wall shear stress downstream of the stenosis and on probability of clot lysis due to clot stresses while passing through the stenosis.     

Effect of geometrical assumptions on numerical modeling of coronary blood flow under normal and disease conditions

Shear stress plays a pivotal role in pathogenesis of coronary heart disease. The spatial and temporal variation in hemodynamics of blood flow, especially shear stress, is dominated by the vessel geometry. The goal of the present study was to investigate the effect of 2D and 3D geometries on the numerical modeling of coronary blood flow and shear stress distribution. We developed physiologically realistic 2D and 3D models (with similar geometries) of the human left coronary artery under normal and stenosis conditions (30%, 60%, and 80%) using PROE (WF 3). Transient blood flows in these models were solved using laminar and turbulent (k-ω) models using a computational fluid dynamics solver, FLUENT (v6.3.26). As the stenosis severity increased, both models predicted a similar pattern of increased shear stress at the stenosis throat, and in recirculation zones formed downstream of the stenosis. The 2D model estimated a peak shear stress value of 0.91, 2.58, 5.21, and 10.09 Pa at the throat location under normal, 30%, 60%, and 80% stenosis severity. The peak shear stress values at the same location estimated by the 3D model were 1.41, 2.56, 3.15, and 13.31 Pa, respectively. The 2D model underestimated the shear stress distribution inside the recirculation zone compared with that of 3D model. The shear stress estimation between the models diverged as the stenosis severity increased. Hence, the 2D model could be sufficient for analyzing coronary blood flow under normal conditions, but under disease conditions (especially 80% stenosis) the 3D model was more suitable.     

Distribution of mass transfer rate and wall shear stress behind simple rectangular stenosis in pulsating flow

The distributions of mass transfer rate and wall shear stress in sinusoidal laminar pulsating flow through a two-dimensional asymmetric stenosed channel have been studied experimentally and numerically. The distributions are measured by the electrochemical method. The measurement is conducted at a Reynolds number of about 150, a Schmidt number of about 1000, a nondimensional pulsating frequency of 3.40, and a nondimensional flow amplitude of 0.3. It is suggested that the deterioration of an arterial wall distal to stenosis may be greatly enhanced by fluid dynamic effects.     

Wall shear stress in backward-facing step flow of a red blood cell suspension.

An experimental investigation of the wall shear stress distribution downstream of a backward-facing step is carried out. The wall shear stress distribution was determined by measuring the deformation of a gel layer, attached to the wall downstream of the step. Speckle pattern interferometry was applied to measure the deformation of the gel layer. The measured deformation, combined with the properties of the gel layer, served as an input for a finite element solid mechanics computation to determine the stress distribution in the gel layer. The wall shear stress, required to generate the measured deformation of the gel layer, was determined from these computations. A Newtonian buffer solution and a non-Newtonian red blood cell suspension were used as measuring fluids. The deformation of the gel layer was determined for a Newtonian buffer solution to evaluate the method and to obtain the properties of the gel layer. Subsequently, the wall shear stress distribution for the non-Newtonian red blood cell suspension was determined for three different flow rates. The inelastic non-Newtonian Carreau-Yasuda model served as constitutive model for the red blood cell suspension. Using this model, the velocity and wall shear stress distribution were computed by means of a finite element fluid mechanics computation. From the comparison between the numerical and the experimental results, it can be concluded that wall shear stresses, induced by the red blood cell suspension, can be modeled accurately by employing a Carreau-Yasuda model.     

Flow pattern analysis in a highly stenotic patient-specific carotid bifurcation model using a turbulence model

The aim of this study is to investigate the blood flow pattern in carotid bifurcation with a high degree of luminal stenosis, combining in vivo magnetic resonance imaging (MRI) and computational fluid dynamics (CFD). A newly developed two-equation transitional model was employed to evaluate wall shear stress (WSS) distribution and pressure drop across the stenosis, which are closely related to plaque vulnerability. A patient with an 80% left carotid stenosis was imaged using high resolution MRI, from which a patient-specific geometry was reconstructed and flow boundary conditions were acquired for CFD simulation. A transitional model was implemented to investigate the flow velocity and WSS distribution in the patient-specific model. The peak time-averaged WSS value of approximately 73 Pa was predicted by the transitional flow model, and the regions of high WSS occurred at the throat of the stenosis. High oscillatory shear index values up to 0.50 were present in a helical flow pattern from the outer wall of the internal carotid artery immediately after the throat. This study shows the potential suitability of a transitional turbulent flow model in capturing the flow phenomena in severely stenosed carotid arteries using patient-specific MRI data and provides the basis for further investigation of the links between haemodynamic variables and plaque vulnerability. It may be useful in the future for risk assessment of patients with carotid disease.     

Dependence of adhesive behavior of neutrophils on local fluid dynamics in a region with recirculating flow

We have recently described patterns of adhesion of different types of leukocytes downstream of a backward facing step. Here the predicted fluid dynamics in channels incorporating backward facing steps are described, and related to the measured velocities of flowing cells, patterns of attachment and characteristics of rolling adhesion for neutrophils perfused over P-selectin. Deeper (upstream depth 300 microm, downstream depth 600 microm, maximum wall shear stress approximately 0.1 Pa) and shallower (upstream depth 260 microm, downstream depth 450 microm, maximum wall shear stress approximately 0.3 Pa) channels were compared. Computational fluid dynamics (CFD) predicted the presence of vortices downstream of the steps, distances to reattachment of flow, local wall shear stresses and components of velocity parallel and perpendicular to the wall. Measurements of velocities of perfused neutrophils agreed well with predictions, and suggested that adhesion to P-selectin should be possible in the regions of recirculating flow, but not downstream in re-established flow in the high shear channel. When channels were coated with a P-selectin-Fc chimaera, neutrophils were captured from flow and immobilised. Capture showed local maxima around the reattachment points, but was absent elsewhere in the high shear chamber. In the low shear chamber there was depression of adhesion just beyond the reattachment point because of expansion of flow and depletion of neutrophils near the wall. Inside the recirculation zones, adhesion decreased approaching the step because of an increasing, vertically upward velocity component. When channels were coated with P-selectin, neutrophils rolled in all regions, but lifted off the surface as they rolled backwards into low shear regions near the step. Rolling velocity in the recirculation zone was independent of shear stress, possibly because of the effects of vertical lift. We conclude that while local wall shear stress influences adhesive behavior, delivery of cells to the wall and their behavior after capture also depend on components of flow perpendicular to the wall.