Nanoscale engineering of biomimetic surfaces: cues from the extracellular matrix

The ultimate goal in the design of biomimetic materials for use in tissue engineering as permanent or resorbable tissue implants is to generate biocompatible scaffolds with appropriate biomechanical and chemical properties to allow the adhesion, ingrowth, and survival of cells. Recent efforts have therefore focused on the construction and modification of biomimetic surfaces targeted to support tissue-specific cell functions including adhesion, growth, differentiation, motility, and the expression of tissue-specific genes. Four decades of extensive research on the structure and biological influence of the extracellular matrix (ECM) on cell behavior and cell fate have shown that three types of information from the ECM are relevant for the design of biomimetic surfaces: (1) physical properties (elasticity, stiffness, resilience of the cellular environment), (2) specific chemical signals from peptide epitopes contained in a wide variety of extracelluar matrix molecules, and (3) the nanoscale topography of microenvironmental adhesive sites. Initial physical and chemical approaches aimed at improving the adhesiveness of biomaterial surfaces by sandblasting, particle coating, or etching have been supplemented by attempts to increase the bioactivity of biomaterials by coating them with ECM macromolecules, such as fibronectin, elastin, laminin, and collagens, or their integrin-binding epitopes including RGD, YIGSR, and GFOGER. Recently, the development of new nanotechnologies such as photo- or electron-beam nanolithography, polymer demixing, nano-imprinting, compression molding, or the generation of TiO₂ nanotubes of defined diameters (15–200 nm), has opened up the possibility of constructing biomimetic surfaces with a defined nanopattern, eliciting tissue-specific cellular responses by stimulating integrin clustering. This development has provided new input into the design of novel biomaterials. The new technologies allowing the construction of a geometrically defined microenvironment for cells at the nanoscale should facilitate the investigation of nanotopography-dependent mechanisms of integrin-mediated cell signaling.     

Surface modification and chemical surface analysis of biomaterials

The chemical composition of the surface layers of synthetic biomaterials used for human medical devices and in biotechnology plays a key role in determining interfacial interactions between biological media (such as protein solutions, cells, tissue) and the synthetic material. Accordingly, considerable research efforts focus on improving the 'biocompatibility' of biomaterials by applying various surface modification and thin film coating approaches. Here we focus on the patterning of surface chemistries, often designed to exercise spatial control over events such as cell attachment and spreading. Secondly, we review recent developments in chemical characterisation of biomaterials surfaces, which is essential both for verifying the success of intended surface modification strategies and for reliable interpretation of observed biological responses. Biomaterials surface analysis by imaging ToF-SIMS and XPS and compositional depth profiling are discussed, as is the emerging complementary technique of Metastable Induced Electron Spectroscopy.     

Development of proteomic tools to study protein adsorption on a biomaterial, titanium grafted with poly(sodium styrene sulfonate)

It is known that protein adsorption is the initial interaction between implanted biomaterials and biological environment. Generally, a complex protein layer will be formed on material surfaces within a few minutes and the composition of this layer at the interface determines the biological response to the implanted material, and therefore the long-term compatibility of the biomaterial. Despite different techniques exist to observe protein adsorption on biomaterials, none of them led to the identification of adsorbed proteins. In this paper, we report a chromatographic technique coupled to proteomics to analyse and identify proteins from complex biological samples adsorbed on biomaterial surfaces. This approach is based on (1) elaboration of the chromatographic support containing the biomaterial (2) a chromatography step involving adsorption of proteins on the biomaterial (3) the high-resolution separation of eluted proteins by 2-DE gel and (4) the identification of proteins by mass spectrometry. Experiments were performed with proteins from platelets rich plasma (PRP) adsorbed on a biomaterial which consist in titanium bioactivated with PolyNaSS. Our results show that chromatographic approach combined to 2-DE gels and mass spectrometry provides a powerful tool for the analysis and identification of proteins adsorbed on various surfaces.     

Ammonia plasma treatment of polystyrene surfaces enhances proliferation of primary human mesenchymal stem cells and human endothelial cells

The control of surface properties is a substantial step in the development and improvement of biomaterials for clinical applications as well as for their use in tissue engineering. Interaction of the substrate surface with the biochemical or biological environment is crucial for the outcome of the applied biomaterial and therefore should meet specific requirements regarding the chemical composition, wettability, elasticity, and charge. In this study, we examined the effect of chemical groups introduced by low pressure plasma treatments of polystyrene surfaces on the cell behavior of primary human mesenchymal stem cells (hMSCs) and dermal microvascular endothelial cells (hDMECs). X-ray photoelectron spectroscopy analysis and contact angle measurements were employed to evaluate ammonia-, carbon dioxide-, and acrylic acid-plasma modifications to substrate surfaces. HMSCs and hDMECs were analyzed simultaneously to identify the most suitable surface functionalization for each cell type. Significantly higher cell proliferation was detected on ammonia plasma-treated surfaces. Cell-material interaction could be shown on all created interfaces as well as the expression of typical cell markers. Hence, the applied plasma treatment presents a suitable tool to improve culture condition on polystyrene for two important cell types (hMSCs and hDMECs) in the field of tissue engineering.     

Efficient surface modification of biomaterial to prevent biofilm formation and the attachment of microorganisms

Biomaterials play a fundamental role in disease management and the improvement of health care. In recent years, there has been a significant growth in the diversity, function, and number of biomaterials used worldwide. Yet, attachment of pathogenic microorganisms onto biomaterial surfaces remains a significant challenge that substantially undermines their clinical applicability, limiting the advancement of these systems. The emergence and escalating pervasiveness of antibiotic-resistant bacterial strains makes the management of biomaterial-associated nosocomial infections increasingly difficult. The conventional post-operative treatment of implant-caused infections using systemic antibiotics is often marginally effective, further accelerating the extent of antimicrobial resistance. Methods by which the initial stages of bacterial attachment and biofilm formation can be restricted or prevented are therefore sought. The surface modification of biomaterials has the potential to alleviate pathogenic biofouling, therefore preventing the need for conventional antibiotics to be applied.     

The role played by modified bioinspired surfaces in interfacial properties of biomaterials

The success of a biomaterial relies on an appropriate interaction between the surface of that biomaterial and the surrounding environment; more specifically, the success of a biomaterial depends on how fluids, proteins, and cells interact with the foreign material. For this reason, the surface properties of biomaterial, such as composition, charge, wettability, and roughness, must be optimized for a desired application to be achieved. In this review we highlight different bioinspired approaches that are used to manipulate and fine-tune the interfacial properties of biomaterials. Inspired by noteworthy natural processes, researchers have developed materials with a functional anatomy that range from hierarchical hybrid structures to self-cleaning interfaces. In this review we focus on (1) the creation of particles and modified surfaces inspired by the structure and composition of biogenic mineralized tissues, (2) the development of biofunctional coatings, (3) materials inspired by biomembranes and proteins, and (4) the design of superwettable materials. Our intention is to point out different bioinspired methodologies that have been used to design materials for biomedical applications and to discuss how interfacial properties modified by manipulation of these materials determine their final biological response. Our objective is to present future research directions and to highlight the potential of bioinspired materials. We hope this review will provide an understanding of the interplay between interfacial properties and biological response so that successful biomaterials can be achieved.     

Modern Approaches to Chemical Modification of Proteins in Biological Tissues: Consequences and Application

Products made of biomaterials, such as heart valve prostheses, vascular grafts, and patches for vascular and intracardiac plastics, are currently used in cardiovascular surgery. The biological tissue used for prosthetics is the alternation of transverse and longitudinal layers of collagen fibers consisting of type I collagen (75%), elastin (<5%), cell elements, as well as glycoproteins, glycosaminoglycans, and other components of the cell matrix. Chemical modifications of components of a biological tissue allow for retention of its natural architectonics and stability of collagen structure over time, while simultaneously increasing the collagen resistance to enzymatic and mechanical destruction and preventing cellular and immune effects on the part of the recipient organism. Proteins in biological tissues are chemically modified (preserved) by the formation of intramolecular and intermolecular cross-links between the amino groups of amino acid residues in collagen molecules. However, cross-linking increases the calcification of biomaterial, making the tissue more rigid and leading to the rupture of the valve flaps, stenosis (reduced clearance), or insufficiency (a decrease in the closure function) of the heart valves. Calcification can also result from specific physiological features of recipient (the patient who received the artificial organ), the nature of the preserving agent, components of the dead cells, defects of collagen structure, cavities in tissues, and the presence of lipids, elastin fibers, glycosaminoglycans, and so on. The factors that induce calcification of the materials used for prosthetic repair and the corresponding methods for its prevention are reviewed. All methods are conventionally divided into three groups: chemical pretreatment of tissues, modification of the preservation method, and posttreatment of preserved tissues with chemical agents. The mechanisms of the processes underlying the effect of chemical agents on the structures of biological tissues are described. The results of their use in clinical practice and prospects for methods still under development and in preclinical trials are discussed, as well as the reasons why some methods have failed. The advantages and disadvantages of various types of treatments are considered. Variants of new methods for chemical modification of biological materials potentially effective in reducing the risk of calcification are proposed.     

Development of advanced antimicrobial and sterilized plasma polypropylene grafted muga (antheraea assama) silk as suture biomaterial

Surface modification of silk fibroin (SF) materials using environmentally friendly and non‐hazardous process to tailor them for specific application as biomaterials has drawn a great deal of interest in the field of biomedical research. To further explore this area of research, in this report, polypropylene (PP) grafted muga (Antheraea assama) SF (PP‐AASF) suture is developed using plasma treatment and plasma graft polymerization process. For this purpose, AASF is first sterilized in argon (Ar) plasma treatment followed by grafting PP onto its surface. AASF is a non‐mulberry variety having superior qualities to mulberry SF and is still unexplored in the context of suture biomaterial. AASF, Ar plasma treated AASF (AASF_Ar) and PP‐AASF are subjected to various characterization techniques for better comparison and the results are attempted to correlate with their observed properties. Excellent mechanical strength, hydrophobicity, antibacterial behavior, and remarkable wound healing activity of PP‐AASF over AASF and AASF_Ar make it a promising candidate for application as sterilized suture biomaterial. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 355–365, 2014.     

Preparation of 3D fibrin scaffolds for stem cell culture applications

Stem cells are found in naturally occurring 3D microenvironments in vivo, which are often referred to as the stem cell niche. Culturing stem cells inside of 3D biomaterial scaffolds provides a way to accurately mimic these microenvironments, providing an advantage over traditional 2D culture methods using polystyrene as well as a method for engineering replacement tissues. While 2D tissue culture polystrene has been used for the majority of cell culture experiments, 3D biomaterial scaffolds can more closely replicate the microenvironments found in vivo by enabling more accurate establishment of cell polarity in the environment and possessing biochemical and mechanical properties similar to soft tissue. A variety of naturally derived and synthetic biomaterial scaffolds have been investigated as 3D environments for supporting stem cell growth. While synthetic scaffolds can be synthesized to have a greater range of mechanical and chemical properties and often have greater reproducibility, natural biomaterials are often composed of proteins and polysaccharides found in the extracelluar matrix and as a result contain binding sites for cell adhesion and readily support cell culture. Fibrin scaffolds, produced by polymerizing the protein fibrinogen obtained from plasma, have been widely investigated for a variety of tissue engineering applications both in vitro and in vivo. Such scaffolds can be modified using a variety of methods to incorporate controlled release systems for delivering therapeutic factors. Previous work has shown that such scaffolds can be used to successfully culture embryonic stem cells and this scaffold-based culture system can be used to screen the effects of various growth factors on the differentiation of the stem cells seeded inside. This protocol details the process of polymerizing fibrin scaffolds from fibrinogen solutions using the enzymatic activity of thrombin. The process takes 2 days to complete, including an overnight dialysis step for the fibrinogen solution to remove citrates that inhibit polymerization. These detailed methods rely on fibrinogen concentrations determined to be optimal for embryonic and induced pluripotent stem cell culture. Other groups have further investigated fibrin scaffolds for a wide range of cell types and applications - demonstrating the versatility of this approach.     

Development of an atmospheric plasma jet device for versatile treatment of electron microscope sample grids

Atmospheric-pressure plasmas have been widely applied for surface modification and biomedical treatment because of their ability to generate highly reactive radicals and charged particles. In negative-stain electron microscopy (Neg-EM) and cryogenic electron microscopy (cryo-EM), plasmas have been used to generate hydrophilic surfaces and eliminate surface contaminants to embed specimens onto grids. In addition, plasma treatment is a prerequisite for negative-stain and Quantifoil grids, whose surfaces are coated with hydrophobic amorphous carbon. Although the conventional glow discharge system has been used successfully in this purpose, there has been no further effort to take an advantage from the recent progress in the plasma field. Here, we developed a nonthermal atmospheric plasma jet system as an alternative tool for treatment of surfaces. The low-temperature plasma is a nonequilibrium system that has been widely used in biomedical area. Unlike conventional glow discharge systems, the plasma jet system successfully cleans and introduces hydrophilicity on the grid surface in the ambient environment without a vacuum. Therefore, we anticipate that the plasma jet system will have numerous benefits, such as convenience and versatility, as well as having potential applications in surface modification for both negative-stain and cryo-EM grid treatment.     

Chemiluminescence-based detection and comparison of protein amounts adsorbed on differently modified silica surfaces

The biological consequences of protein adsorption on biomaterial surfaces are considered to be of utmost importance for their biocompatibility. A new method based on amino group-labeling coupled to a chemiluminescence reaction for direct determination of proteins adsorbed on material surfaces was employed. This method was used to explore the effects of surface chemistry and surface roughness on protein adsorption in a silicon oxide model system. Corundum sandblasting was applied to silicon wafers to create roughened surfaces while immobilization of fluorocarbon-, hydrocarbon-, and poly(ethylene glycol)-containing silanes produced surfaces of varying wettability. The adsorption behavior of two complex body fluids, human serum and saliva, and of two purified components, human serum albumin and fibronectin, was strongly influenced by the surface parameters. A general tendency to higher amounts of adsorbed protein was found on roughened surfaces and modification with poly(ethylene glycol) or with fluorocarbon moieties reduced protein adsorption. The values obtained with the new method could be confirmed by a colorimetric determination of protein amounts adsorbed on identically modified silica beads and were in accordance with those previously reported utilizing established methods for protein quantification. The presented method, which was methodically simple to perform and allowed the simultaneous measurement of a large number of samples, may be of future value for high-throughput surveying of the protein adsorption characteristics of biomaterials.     

组织工程生物支架材料

组织工程支架材料表面的微观和亚微观结构对细胞的黏附与生长有很重要的影响,纳米结构材料的应用为该结构展现了较广阔的前景。另外,组织工程支架材料的表面修饰及孔径调控对生物材料的改进有很重要的作用。介绍了生物材料的基本要求和分类,纳米结构材料在组织工程中的应用及生物材料表面修饰,以及以泡沫支架为例介绍材料孔径调控。     

Reproducible Biofilm Cultivation of Chemostat-Grown Escherichia coli and Investigation of Bacterial Adhesion on Biomaterials Using a Non-Constant-Depth Film Fermenter

Biomaterials-associated infections are primarily initiated by the adhesion of microorganisms on the biomaterial surfaces and subsequent biofilm formation. Understanding the fundamental microbial adhesion mechanisms and biofilm development is crucial for developing strategies to prevent such infections. Suitable in vitro systems for biofilm cultivation and bacterial adhesion at controllable, constant and reproducible conditions are indispensable. This study aimed (i) to modify the previously described constant-depth film fermenter for the reproducible cultivation of biofilms at non-depth-restricted, constant and low shear conditions and (ii) to use this system to elucidate bacterial adhesion kinetics on different biomaterials, focusing on biomaterials surface nanoroughness and hydrophobicity. Chemostat-grown Escherichia coli were used for biofilm cultivation on titanium oxide and investigating bacterial adhesion over time on titanium oxide, poly(styrene), poly(tetrafluoroethylene) and glass. Using chemostat-grown microbial cells (single-species continuous culture) minimized variations between the biofilms cultivated during different experimental runs. Bacterial adhesion on biomaterials comprised an initial lag-phase I followed by a fast adhesion phase II and a phase of saturation III. With increasing biomaterials surface nanoroughness and increasing hydrophobicity, adhesion rates increased during phases I and II. The influence of materials surface hydrophobicity seemed to exceed that of nanoroughness during the lag-phase I, whereas it was vice versa during adhesion phase II. This study introduces the non-constant-depth film fermenter in combination with a chemostat culture to allow for a controlled approach to reproducibly cultivate biofilms and to investigate bacterial adhesion kinetics at constant and low shear conditions. The findings will support developing and adequate testing of biomaterials surface modifications eventually preventing biomaterial-associated infections.     

Biomaterials surfaces capable of resisting fungal attachment and biofilm formation

Microbial attachment onto biomedical devices and implants leads to biofilm formation and infection; such biofilms can be bacterial, fungal, or mixed. In the past 15 years, there has been an increasing research effort into antimicrobial surfaces but the great majority of these publications present research on bacteria, with some reports also testing resistance to fungi. Very few studies have focused exclusively on antifungal surfaces. However, with increasing recognition of the importance of fungal infections to human health, particularly related to infections at biomaterials, it would seem that the interest in antifungal surfaces is disproportionately low. In studies of both bacteria and fungi, fungi tend to be the minor focus with hypothesized antibacterial mechanisms of action often generalized to also explain the antifungal effect. Yet bacteria and fungi represent two Distinct biological Domains and possess substantially different cellular physiology and structure. Thus it is questionable whether these generalizations are valid. Here we review the scientific literature focusing on surface coatings prepared with antifungal agents covalently attached to the biomaterial surface. We present a critical analysis of generalizations and their evidence. This review should be of interest to researchers of “antimicrobial” surfaces by addressing specific issues that are key to designing and understanding antifungal biomaterials surfaces and their putative mechanisms of action.     

Development of a Standardized and Safe Airborne Antibacterial Assay,and Its Evaluation on Antibacterial Biomimetic Model Surfaces

Bacterial infection of biomaterials is a major concern in medicine, and different kinds of antimicrobial biomaterial have been developed to deal with this problem. To test the antimicrobial performance of these biomaterials, the airborne bacterial assay is used, which involves the formation of biohazardous bacterial aerosols. We here describe a new experimental set-up which allows safe handling of such pathogenic aerosols, and standardizes critical parameters of this otherwise intractable and strongly user-dependent assay. With this new method, reproducible, thorough antimicrobial data (number of colony forming units and live-dead-stain) was obtained. Poly(oxonorbornene)-based Synthetic Mimics of Antimicrobial Peptides (SMAMPs) were used as antimicrobial test samples. The assay was able to differentiate even between subtle sample differences, such as different sample thicknesses. With this new set-up, the airborne bacterial assay was thus established as a useful, reliable, and realistic experimental method to simulate the contamination of biomaterials with bacteria, for example in an intraoperative setting.     

Biomaterial films of Bombyx mori silk fibroin with poly(ethylene oxide)

Phase separation into controllable patterned microstructures was observed for Bombyx mori silkworm silk and poly(ethylene oxide) (PEO) (900000 g/mol) blends cast from solution. The evolution of the microstructures with increasing PEO volume fraction is strikingly similar to the progression of phases and microstructures observed with surfactants. The chemically patterned materials obtained provide engineerable biomaterial surfaces with predictable microscale features which can be used to create topographically patterned or chemically functionalized biomaterials. Solution blending was used to incorporate water-soluble PEO into silk to enhance elasticity and hydrophilicity. The sizes of the globule fibroin phase ranged from 2.1 +/- 0.5 to 18.2 +/- 2.1 microm depending on the ratio of silk/PEO. Optical microscopy and SEM analysis confirmed the micro-phase separation between PEO and silk. Surface properties were determined by XPS and contact angle. Methanol can be used to control the conformational transition of silk fibroin to the insoluble beta-sheet state. Subsequentially, the PEO can be easily extracted from the films with water to generate silk matrixes with definable porosity and enhanced surface roughness. These blend films formed from two biocompatible polymers provide potential new biomaterials for tissue engineering scaffolds.     

Competitive protein adsorption on micro patterned polymeric biomaterials, and viscoelastic properties of tailor made extracellular matrices

Cell adhesion on biomaterial surfaces and the vitality of anchorage dependent cells is affected by several parameters of an adsorbate layer which is intentionally or spontaneously formed. Surface pre-treatments and several conditioning steps prior and during to the cell/biomaterial contact affect the composition, orientation, quantity and viscoelasticity of the interfacing layer between cells and biomaterial. This work was performed to elucidate the response of cells on two modified biomaterial surfaces based on protein or carbohydrate adsorbates: (a) Masked UV irradiations opened a simple route to obtain chemically patterned substrates controlling serum protein adsorption and cell adhesion. It is possible to achieve structures of subcellular size and to produce immobilized gradients. In order to examine the protein matrix deposited on these substrates we applied a quartz microbalance technique (QCM-D) capable to extract viscoelastic data in addition to the mass uptake during plasma protein deposition. It was found that the quantity and viscosity of surface bound albumin is lowered when the surface is modified (patterned) by UV exposure. Hence, the UV modification promotes the competitive adsorption of cell adhesion proteins from the media or upon secretion by the cells and yields to the observed cell patterns. (b) Another tissue engineering technique, using immobilized, modified and/or cross linked hyaluronic acid (HA), an important extra cellular matrix component in vivo, is also examined by QCM-D. Our data demonstrate that HA can be modified by an activation with a carbodiimide, followed by the application of an alpha,omega-bisamino polyethyleneglycol. The QCM-D data can be interpreted as a stiffening of the HA layer combined with the release of hydration water. Further, the hydration state and the viscoelastic behaviour of surface bound ultrathin HA hydrogels was examined. Quantification of viscoelastic parameters of thin films of ECM by QCM-D is valuable for the interpretation of durotaxis, describing effects of mechanical substrate parameters on the adhesion and motility of cells.     

Transmission FT-IR microspectroscopy of mineral phases in calcified tissues

Fourier-transform infrared microspectroscopy (FT-IRM) was used to study bone mineralization processes in an in vivo model and in enamel in osteogenesis imperfecta. Finally, the ability of FT-IRM to map new bone formed in implanted macroporous calcium phosphate biomaterial from sections was reported for the first time. FTIRM allowed the correlation of the microstructure of bone formation in the in vivo model with modifications in carbonate and phosphate environments of the mineral phases during maturation. FT-IRM analysis on enamel sections revealed changes in the mineral environment of carbonate and phosphate ions and probably in the size of enamel crystals. These modifications contributed to the fragility of enamel in osteogenesis imperfecta. The infrared functional group imaging of a part of implanted biomaterial and the bone ingrowth provided the visualization of chemical modifications occurring in biomaterial implants at 20 μm spatial resolution. The use of FT-IRM, in conjunction with appropriate sampling methods and data analysis should provide further insight into the molecular structure of mineral phases of calcified tissues and help to elucidate mineralization processes, skeletal disorders and properties of the biomaterials used as bone substitute.     

Influence of slime production and adhesion of Candida sp. on biofilm formation

The increase of fungal infections in recent years is connected with the progress in medicine. The vast usage of biomaterials is an inseparable element of contemporary medicine but it also leads to development of infections. Yeast-like fungi Candida albicans are still the main pathogen of candidiasis. The ability to slime production and adhesion to polystyrene of Candida sp. on different surfaces can cause to form biofilm on surfaces of biomaterials used in production of catheters, drains and prosthesis. The aim of the study was to evaluate the influence of slime production and adhesion to polystyrene, of Candida sp. on biofilm formation on different biomaterials. 50 strains of Candida sp. were examined. They isolated from ill to Clinics of Anesthesiology and Intensive Therapy University Hospital No 1 of dr. A. Jurasza in Bydgoszcz. The ability to slime production was evaluated by Christensen method in modification Davenport and Branchini methods. The adhesion to polystyrene was evaluated by Richards et el method. The ability to produce biofilm biomaterials by the studied fungi was measured after 72 hours of incubation at 37 degrees C on different biomaterials. Yeast-like fungi Candida sp. fabricating slime and adhesion forming frequently biofilm on surface researched of biomaterials. Influence of chosen biological specificity ascertain on the ability to produce biofilm on surfaces of siliconized latex and polyvinylchloride.