Discovery of novel feruloyl esterase activity of BioH in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21(DE3)

Objectives

To characterize a novel feruloyl esterase from Escherichia coli BL21 DE3.

Results

The gene encoding BioH was cloned and overexpressed in E. coli. The protein was purified and its catalytic activity was assessed. BioH exhibited feruloyl esterase activity toward a broad range of substrates, and the corresponding kinetic constants for the methyl ferulate, ethyl ferulate, and methyl p-coumarate substrates were: K _m values of 0.48, 6.3, and 1.9 mM, respectively, and k _cat /K _m values of 9.3, 3.8, and 3.8 mM^?1 s^?1, respectively.

Conclusions

Feruloyl esterase from E. coli was expressed for the first time. BioH was confirmed to be a feruloyl esterase.

     

Purification and Characterization of a Novel (<Emphasis Type="Italic">R</Emphasis>)-1-Phenylethanol Dehydrogenase from <Emphasis Type="Italic">Lysinibacillus</Emphasis> sp. NUST506

A novel (R)-1-phenylethanol dehydrogenase was successfully purified from Lysinibacillus sp. NUST506 by preparative polyacrylamide gel electrophoresis. The enzyme is a NAD+-dependent oxidoreductase. The molecular weight of the (R)-1-phenylethanol dehydrogenase measured by SDS-PAGE was about 28 kDa. Furthermore, the optimal reaction conditions for the oxidative reaction were 70°C and pH 9.5 and for the reductive reaction were 65°C and pH 6.5. Under the optimal conditions, the K_M and k_cat values with (R)-1-phenylethanol as a substrate were found to be 0.78 mM and 123 s^–1 and with acetophenone they were 0.56 mM and 125 s^–1, respectively. The (R)-1-phenylethanol dehydrogenase became more stable at pH 9.5 in comparison with pH 5.0 and high stability was noticed at 4 and 37°C. Properties of the enzyme place it as a promising candidate for industrial applications.     

Cloning and characterization of two distinct water-forming NADH oxidases from <Emphasis Type="Italic">Lactobacillus pentosus</Emphasis> for the regeneration of NAD

Two uncharacterized nicotinamide adenine dinucleotide (NADH) oxidases (named as LpNox1, LpNox2) from Lactobacillus pentosus ATCC 8041 were cloned and overexpressed in Escherichia coli BL21 (DE3). The sequence analysis revealed that the two enzymes are water-forming Noxs with 64 % and 52 % identity to LbNox from Lactobacillus brevis DSM 20054. The optimal pH and temperature of the purified LpNox1 and LpNox2 were 7.0 and 8.0 and 35 and 40 °C, respectively, with K _M of 99.0 μM (LpNox1) and 27.6 μM (LpNox2), and yielding catalytic efficiency k _cat/K _M of 1.0 and 0.2 μM^?1 s^?1, respectively. Heat inactivation studies revealed that the two enzymes are relatively instable. The application of LpNox1 for the regeneration of NAD⁺ was demonstrated by coupling with a glycerol dehydrogenase-catalyzed oxidation of glycerol to 1,3-dihydroxyacetone. The characteristics of the LpNox1 could prove to be of interest in industrial application such as NAD⁺ regeneration in dehydrogenase-catalyzed oxidations.     

Cloning and characterization of a novel amidase from <Emphasis Type="Italic">Paracoccus</Emphasis> sp. M-1, showing aryl acylamidase and acyl transferase activities

A novel amidase gene, designated pamh, was cloned from Paracoccus sp. M-1. Site-directed mutagenesis and bioinformatic analysis showed that the PamH protein belonged to the amidase signature enzyme family. PamH was expressed in Escherichia coli, purified, and characterized. The molecular mass of PamH was determined to be 52 kDa with an isoelectric point of 5.13. PamH displayed its highest enzymatic activity at 45°C and at pH 8.0 and was stable within a pH range of 5.0–10.0. The PamH enzyme exhibited amidase activity, aryl acylamidase activity, and acyl transferase activity, allowing it to function across a very broad substrate spectrum. PamH was highly active on aromatic and short-chain aliphatic amides (benzamide and propionamide), moderately active on amino acid amides, and possessed weak urease activity. Of the anilides examined, only propanil was a good substrate for PamH. For propanil, the k _cat and K _m were 2.8 s^?1 and 158 μM, respectively, and the catalytic efficiency value (k _cat/K _m) was 0.018 μM^?1 s^?1. In addition, PamH was able to catalyze the acyl transfer reaction to hydroxylamine for both amide and anilide substrates, including acetamide, propanil, and 4-nitroacetanilide; the highest reaction rate was shown with isobutyramide. These characteristics make PamH an excellent candidate for environmental remediation and an important enzyme for the biosynthesis of novel amides.     

Cloning,expression, and characterization of a thermostable glucose-6-phosphate dehydrogenase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis>

Glucose-6-phosphate dehydrogenases (G6PDs) are important enzymes widely used in bioassay and biocatalysis. In this study, we reported the cloning, expression, and enzymatic characterization of G6PDs from the thermophilic bacterium Thermoanaerobacter tengcongensis MB4 (TtG6PD). SDS-PAGE showed that purified recombinant enzyme had an apparent subunit molecular weight of 60 kDa. Kinetics assay indicated that TtG6PD preferred NADP⁺ (k _cat/K _m = 2618 mM^?1 s^?1, k _cat = 249 s^?1, K _m = 0.10 ± 0.01 mM) as cofactor, although NAD⁺ (k _cat/K _m = 138 mM^?1 s^?1, k _cat = 604 s^?1, K _m = 4.37 ± 0.56 mM) could also be accepted. The K _m values of glucose-6-phosphate were 0.27 ± 0.07 mM and 5.08 ± 0.68 mM with NADP⁺ and NAD⁺ as cofactors, respectively. The enzyme displayed its optimum activity at pH 6.8–9.0 for NADP⁺ and at pH 7.0–8.6 for NAD⁺ while the optimal temperature was 80 °C for NADP⁺ and 70 °C for NAD⁺. This was the first observation that the NADP⁺-linked optimal temperature of a dual coenzyme-specific G6PD was higher than the NAD⁺-linked and growth (75 °C) optimal temperature, which suggested G6PD might contribute to the thermal resistance of a bacterium. The potential of TtG6PD to measure the activity of another thermophilic enzyme was demonstrated by the coupled assays for a thermophilic glucokinase.     

Single point mutations enhance activity of <Emphasis Type="Italic">cis</Emphasis>-epoxysuccinate hydrolase

Objectives

To enhance activity of cis-epoxysuccinate hydrolase from Klebsiella sp. BK-58 for converting cis-epoxysuccinate to tartrate.

Results

By semi-saturation mutagenesis, all the mutants of the six important conserved residues almost completely lost activity. Then random mutation by error-prone PCR and high throughput screening were further performed to screen higher activity enzyme. We obtained a positive mutant F10D after screening 6000 mutations. Saturation mutagenesis on residues Phe10 showed that most of mutants exhibited higher activity than the wild-type, and the highest mutant was F10Q with activity of 812 U mg^?1 (k _cat /K _m , 9.8 ± 0.1 mM^?1 s^?1), which was 230 % higher than that of wild-type enzyme 355 U mg^?1 (k _cat /K _m , 5.3 ± 0.1 mM^?1 s^?1). However, the thermostability of the mutant F10Q slightly decreased.

Conclusions

The catalytic activity of a cis-epoxysuccinate hydrolase was efficient improved by a single mutation F10Q and Phe10 might play an important role in the catalysis.

     

Overexpression and characterization of a novel cold-adapted and salt-tolerant GH1 β-glucosidase from the marine bacterium <Emphasis Type="Italic">Alteromonas</Emphasis> sp. L82

A novel gene (bgl) encoding a cold-adapted β-glucosidase was cloned from the marine bacterium Alteromonas sp. L82. Based on sequence analysis and its putative catalytic conserved region, Bgl belonged to the glycoside hydrolase family 1. Bgl was overexpressed in E. coli and purified by Ni²⁺ affinity chromatography. The purified recombinant β-glucosidase showed maximum activity at temperatures between 25°C to 45°C and over the pH range 6 to 8. The enzyme lost activity quickly after incubation at 40°C. Therefore, recombinant β-glucosidase appears to be a cold-adapted enzyme. The addition of reducing agent doubled its activity and 2 M NaCl did not influence its activity. Recombinant β-glucosidase was also tolerant of 700 mM glucose and some organic solvents. Bgl had a K_m of 0.55 mM, a V_max of 83.6 U/mg, a k_cat of 74.3 s^-1 and k_cat/K_m of 135.1 at 40°C, pH 7 with 4-nitrophenyl-β-D-glucopyranoside as a substrate. These properties indicate Bgl may be an interesting candidate for biotechnological and industrial applications.     

Purification and characterization of a β-1,4-glucosidase from a newly isolated strain of <Emphasis Type="Italic">Fomitopsis pinicola</Emphasis>

An efficient ß-1,4-glucosidase (BGL) producing strain, Fomitopsis pinicola KMJ812, was isolated and identified based on morphological features and sequence analysis of internal transcribed spacer rDNA. An extracellular BGL was purified to homogeneity by sequential chromatography of F. pinicola culture supernatants on a DEAE-sepharose column, a gel filtration column, and then on a Mono Q column with fast protein liquid chromatography. The relative molecular weight of F. pinicola BGL was determined to be 105 kDa by sodium dodecylsulfate-polyacrylamide gel electrophoresis, or 110 kDa by size exclusion chromatography, indicating that the enzyme is a monomer. The hydrolytic activity of the BGL had a pH optimum of 4.5 and a temperature optimum of 50°C. The enzyme showed high substrate specificity and high catalytic efficiency (k _cat?=?2,990 s^?1, K _m?=?1.76 mM, k _cat/K _m?=?1,700 mM^?1 s^?1) for p-nitrophenyl-β-d-glucopyranoside. Its internal amino acid sequences showed a significant homology with hydrolases from glycoside hydrolase family 3, indicating that the F. pinicola BGL is a member of glycoside hydrolase family 3. Although BGLs have been purified and characterized from several other sources, F. pinicola BGL is distinguished from other BGLs by its high catalytic efficiency and strict substrate specificity.     

High-yield production of human Dicer by transfection of human HEK293-EBNA1 cells grown in suspension

Background

Dicer is a 219-kDa protein that plays key roles in gene regulation, particularly as the ribonuclease III enzyme responsible for cleaving precursor miRNA substrates. Its enzymatic activity is highly regulated by protein factors, and this regulation can impact on the levels of miRNAs and modulate the behavior of a cell. To better understand the underlying mechanisms of regulation, detailed enzymatic and structural characterization of Dicer are needed. However, these types of studies generally require several milligrams of recombinant protein, and efficient preparation of such quantities of pure human Dicer remains a challenge. To prepare large quantities of human Dicer, we have optimized transfection in HEK293-6E cells grown in suspension and streamlined a purification procedure.

Results

Transfection conditions were first optimized to achieve expression levels between 10 and 18?mg of recombinant Dicer per liter of culture. A three-step purification protocol was then developed that yields 4–9?mg of purified Dicer per liter of culture in a single day. From SEC-MALS/RI analysis and negative stain TEM, we confirmed that the purified protein is monomerically pure ( ≥ 98%) and folds with the characteristic L-shape geometry. Using an electrophoretic mobility shift assay, a dissociation constant (K_d) of 5?nM was measured for Dicer binding to pre-let-7a-1, in agreement with previous reports. However, when probing the cleavage activity of Dicer for pre-let-7a-1, we measured k_cat (7.2?±?0.5?min^??1) and K_M (1.2?±?0.3?μM) values that are much higher than previously reported due to experimental conditions that better respect the steady-state assumption.

Conclusions

The expression and purification protocols described here provide high yields of monomerically pure and active human Dicer. Cleavage studies of a pre-let-7 substrate with this purified Dicer reveal higher k_cat and K_M values than previously reported and support the current view that conformational changes are associated with substrate binding. Large quantities of highly pure Dicer will be valuable for future biochemical, biophysical and structural investigations of this key protein of the miRNA pathway.

     

Purification and Characterization of Exo-Inulinase from <Emphasis Type="Italic">Paenibacillus</Emphasis> sp. d9 Strain

This study intended to purify and characterise exo-inulinase of diesel-degrading Paenibacillus sp. D9. The whole genome sequencing of Paenibacillus sp. D9 revealed to possess the sacC gene that is encoded as exo-inulinase/levanase. This isolate was capable of producing a maximum of 50.9 IU/mL of exo-inulinase activity within 3 days at 30?°C, 200 rpm and pH of 7.0 on minimal salt medium agar supplemented with 1% (w/v) inulin. An exo-inulinase of 58.5 kDa was purified using ammonium sulphate precipitation, HiTrap QFF column and MMC column chromatographies with a specific activity of 4333 IU/mg, 7.1% recovery and a 4.3-fold increase in purity. The purified D9 exo-inulinase had temperature and pH optimum at 40?°C and pH 4.0, respectively, with the Michaelis constant of 5.5 mM and a maximal velocity of 476.2 IU/mg, respectively. Catalytic constant, k _cat was calculated to be 42.6 s^?1 with a catalytic efficiency (k _cat /K _m ) of 7.6 s^?1 mM^?1. The presence of Ca²⁺ enhanced the activity of D9 exo-inulinase while Hg²⁺ completely inhibited the activity, other compounds such as Fe³⁺ and Cu²⁺ had an inhibitory effect. The results of amino acid alignment and the complete degradation of inulin into fructose by the purified enzyme confirmed that inulinase from Paenibacillus sp. D9 is an exo-form. The phylogenetic tree based on the protein sequences indicates that bacterial exo-inulinases possess a common ancestry.     

Bifunctional recombinant cellulase–xylanase (rBhcell-xyl) from the polyextremophilic bacterium <Emphasis Type="Italic">Bacillus halodurans</Emphasis> TSLV1 and its utility in valorization of renewable agro-residues

The thermostable bifunctional CMCase and xylanase encoding gene (rBhcell-xyl) from Bacillus halodurans TSLV1 has been expressed in Escherichia coli. The recombinant E. coli produced rBhcell-xyl (CMCase 2272 and 910 U L^?1 xylanase). The rBhcell-xyl is a ~62-kDa monomeric protein with temperature and pH optima of 60 °C and 6.0 with T_1/2 of 7.0 and 3.5 h at 80 °C for CMCase and xylanase, respectively. The apparent K _m values (CMC and Birchwood xylan) are 3.8 and 3.2 mg mL^?1. The catalytic efficiency (k _cat/K _m ) values of xylanase and CMCase are 657 and 171 mL mg^?1 min^?1, respectively. End-product analysis confirmed that rBhcell-xyl is a unique endo-acting enzyme with exoglucanase activity. The rBhcell-xyl is a GH5 family enzyme possessing single catalytic module and carbohydrate binding module. The action of rBhcell-xyl on corn cobs and wheat bran liberated reducing sugars, which can be fermented to bioethanol and fine biochemicals.     

Metagenomic mining of feruloyl esterases from termite enteric flora

A metagenome expression library was created from Trinervitermes trinervoides termite hindgut symbionts and subsequently screened for feruloyl esterase (FAE) activities, resulting in seven recombinant fosmids conferring feruloyl esterase phenotypes. The amino acid sequence lengths of the seven FAE encoding open reading frames (ORFs) ranged from 260 to 274 aa and encoded polypeptides of between 28.9 and 31.4 kDa. The highest sequence identity scores for the seven ORFs against the GenBank database were between 45 and 59 % to a number of carboxyl ester hydrolyses. The seven FAE primary structures contained sequence motifs that correspond well with a classical pentapeptide (G-x-S-x-G) serine hydrolyse signature motif which harbours the catalytic serine residue in other FAE families. Six of the seven fae genes were successfully expressed heterologously in Escherichia coli, and the purified enzymes exhibited temperature optima range of 40–70 °C and the pH optima of between 6.5 and 8.0. The k _cat/K _M ratios for the six characterised FAEs showed the following order of substrate preference: methyl sinapate?>?methyl ferulate?>?ethyl ferulate. All six FAEs showed poor conversion rates against methyl p-coumarate and methyl caffeate, both of which lacked the methoxy (O–CH₃) group substituent on the aromatic ring of the ester substrates, emphasising the requirement for at least one methoxy group on the aromatic ring of the hydroxycinnamic acid ester substrate for optimal FAE activity.     

Effect of salts and Triton X-100 on ultrafiltration purification and properties of extracellular glucose oxidase from <Emphasis Type="Italic">Penicillium adametzii</Emphasis> LF F-2044.1

We compared the effectiveness of glucose oxidase isolation from the culture fluid of Penicillium adametzii LF F-2044.1 in the presence of ammonium sulfate, ammonium chloride, and Triton X-100. Ammonium chloride inhibited glucose oxidase in the culture fluid. This compound increased K _M (by 1.2–1.3 times), but decreased V _max for D-glucose oxidation (by 1.7–1.8 times). Ammonium sulfate had little effect on kinetic parameters. Combined treatment with salts and Triton X-100 was followed by a significant increase in the effectiveness of ultrafiltration purification of the culture fluid. The samples of glucose oxidase were electrophoretically characterized. The dependence of kinetic parameters on glucose oxidase concentration during oxidation of D-glucose was evaluated. The catalytic constant and k _cat/K _M ratio for glucose oxidase samples from the culture fluid isolated in the presence of additives significantly surpassed those for enzyme samples, which were obtained by ultrafiltration of the culture fluid with no additives and chromatography on aluminum oxide. The activity of glucose oxidase isolated from the culture fluid in the presence of ammonium chloride was lower compared to that of the enzyme obtained in the presence of ammonium sulfate. This agent is preferable for ultrafiltration of the culture fluid.     

Kinetics of the exchange reaction catalyzed by 2-amino-3-ketobutyrate CoA ligase

2-Amino-3-ketobutyrate CoA ligase (KBL) of Escherichia coli is a member of the α-oxoamine synthase family; it catalyzes the condensation reaction between glycine and acetyl CoA to yield 2-amino-3-ketobutyrate.We have previously shown that KBL catalyzes the exchange of pro-R hydrogen of glycine with protons in the medium; however, the kinetics of this reaction has never been determined. In this study, we calculated the kinetic parameters of this exchange reaction by using different concentrations of [2RS- ³H₂: 2-¹⁴C] glycine. The rate of the exchange reaction was determined by measuring the ³H/¹⁴C ratio in recovered [2S- ³H: 2-¹⁴C]glycine. The Lineweaver-Burk plot showed that K _m and k _cat of this reaction were 3.8 × 10^-3 M and 0.22 S^-1, respectively. On the other hand, K _m and k _cat values of the overall KBL-mediated catalysis were correspondingly 1.23 × 10^-2M and 1.19 S^-1. Thus, the rate of the exchange reaction was almost five times lower than that of overall KBL catalysis.     

A chimeric α-amylase engineered from <Emphasis Type="Italic">Bacillus acidicola</Emphasis> and G<Emphasis Type="Italic">eobacillus thermoleovorans</Emphasis> with improved thermostability and catalytic efficiency

The α-amylase (Ba-amy) of Bacillus acidicola was fused with DNA fragments encoding partial N- and C-terminal region of thermostable α-amylase gene of Geobacillus thermoleovorans (Gt-amy). The chimeric enzyme (Ba-Gt-amy) expressed in Escherichia coli displays marked increase in catalytic efficiency [K _cat: 4 × 10⁴ s^?1 and K _cat/K _m: 5 × 10⁴ mL^?1 mg^?1 s^?1] and higher thermostability than Ba-amy. The melting temperature (T _m) of Ba-Gt-amy (73.8 °C) is also higher than Ba-amy (62 °C), and the CD spectrum analysis revealed the stability of the former, despite minor alteration in secondary structure. Langmuir–Hinshelwood kinetic analysis suggests that the adsorption of Ba-Gt-amy onto raw starch is more favourable than Ba-amy. Ba-Gt-amy is thus a suitable biocatalyst for raw starch saccharification at sub-gelatinization temperatures because of its acid stability, thermostability and Ca²⁺ independence, and better than the other known bacterial acidic α-amylases.     

Production,characteristics and applications of phytase from a rhizosphere isolated <Emphasis Type="Italic">Enterobacter</Emphasis> sp. ACSS

Optimization of process parameters for phytase production by Enterobacter sp. ACSS led to a 4.6-fold improvement in submerged fermentation, which was enhanced further in fed-batch fermentation. The purified 62 kDa monomeric phytase was optimally active at pH 2.5 and 60 °C and retained activity over a wide range of temperature (40–80 °C) and pH (2.0–6.0) with a half-life of 11.3 min at 80 °C. The kinetic parameters K _m, V _max, K _cat, and K _cat/K _m of the pure phytase were 0.21 mM, 131.58 nmol mg^?1 s^?1, 1.64 × 10³ s^?1, and 7.81 × 10⁶ M^?1 s^?1, respectively. The enzyme was fairly stable in the presence of pepsin under physiological conditions. It was stimulated by Ca⁺², Mg⁺² and Mn⁺², but inhibited by Zn⁺², Cu⁺², Fe⁺², Pb⁺², Ba⁺² and surfactants. The enzyme can be applied in dephytinizing animal feeds, and the baking industry.     

Fusion of Carbohydrate Binding Modules to Bifunctional Cellulase to Enhance Binding Affinity and Cellulolytic Activity

Bifunctional cellulase (glycoside hydrolase 5, GH5) from Bacillus sp. D04 having both endo- and exoglucanase activities was fused with two types of carbohydrate binding modules (CBMs). CBM3 from Bacillus sp. D04 and CBM9 from Thermotoga maritima Xyn10A were added to GH5 to hydrolyze microcrystalline cellulose (Avicel) as well as water-soluble cellulose (carboxymethyl cellulose, CMC). The optimum temperature of GH5 was 50oC, while it increased to 60oC for the fusion GH5-CBM3 and GH5-CBM9, indicating that addition of CBM increased the thermostability of the enzyme. Addition of CBM3 and CBM9 enhanced the GH5 affinity (K_M), for which K_M decreased from 104 to 33.9 ~ 35.1 mg/mL for CMC, and from 115 to 55.5 ~ 80.3 mg/mL for Avicel, respectively. The catalytic efficiency (k_cat/K_M) also increased from 4.80 to 5.36 ~ 6.46 (mL/mg)/sec for CMC, and from 1.77 to 2.40 ~ 4.45 (mL/mg)/sec for Avicel, respectively, by addition of CBM3 and CBM9.     

The nitrite reductase activity of horse heart carboxymethylated-cytochrome <Emphasis Type="Italic">c</Emphasis> is modulated by cardiolipin

Horse heart carboxymethylated cytc (CM-cytc) displays myoglobin-like properties. Here, the effect of cardiolipin (CL) liposomes on the nitrite reductase activity of ferrous CM-cytc [CM-cytc-Fe(II)], in the presence of sodium dithionite, is reported between pH 5.5 and 7.6, at 20.0 °C. Cytc-Fe(II) displays a very low value of the apparent second-order rate constant for the NO₂ ^?-mediated conversion of cytc-Fe(II) to cytc-Fe(II)-NO [k _on = (7.3 ± 0.7) × 10^?2 M^?1 s^?1; at pH 7.4], whereas the value of k _on for NO₂ ^? reduction by CM-cytc-Fe(II) is 1.1 ± 0.2 M^?1 s^?1 (at pH 7.4). CL facilitates the NO₂ ^?-mediated nitrosylation of CM-cytc-Fe(II) in a dose-dependent manner, the value of k _on for the NO₂ ^?-mediated conversion of CL–CM-cytc-Fe(II) to CL–CM-cytc-Fe(II)-NO (5.6 ± 0.6 M^?1 s^?1; at pH 7.4) being slightly higher than that for the NO₂ ^?-mediated conversion of CL–cytc-Fe(II) to CL–cytc-Fe(II)-NO (2.6 ± 0.3 M^?1 s^?1; at pH 7.4). The apparent affinity of CL for CM-cytc-Fe(II) is essentially pH independent, the average value of B being (1.3 ± 0.3) × 10^?6 M. In the absence and presence of CL liposomes, the nitrite reductase activity of CM-cytc-Fe(II) increases linearly on lowering pH and the values of the slope of the linear fittings of Log k _on versus pH are ?1.05 ± 0.07 and ?1.03 ± 0.03, respectively, reflecting the involvement of one proton for the formation of the transient ferric form, NO, and OH^?. These results indicate that Met80 carboxymethylation and CL binding cooperate in the stabilization of the highly reactive heme-Fe atom of CL–CM-cytc.