Characterization of cell structural change,growth, lipid accumulation,and pigment profile of a novel oleaginous microalga, <Emphasis Type="Italic">Vischeria stellata</Emphasis> (Eustigmatophyceae), cultured with different initial nitrate supplies

The appropriate microalgal species and the optimal nitrogen supply in culture medium are vital factors in maximizing biomass and metabolite productivities in microalgae. Vischeria stellata is an edaphic unicellular eustigmatophycean microalga. Cytological and ultrastructural characteristics and the effects of different initial nitrate-nitrogen concentrations on growth, lipid accumulation, fatty acid profile, and pigment composition were investigated in the present study. The cell structures of V. stellata changed with the degree of nutrient utilization and growth phase. The initial nitrate concentration for the optimal growth of V. stellata ranged from 6.0 to 9.0 mM. The maximum total lipid (TLs), neutral lipid (NLs), and total fatty acid (TFAs) contents were 55.9, 51.9, and 44.7 % of dry biomass, respectively. The highest volumetric productivity of TLs, NLs, and TFAs reached 0.28, 0.25, and 0.21 g L^?1 day^?1, respectively. V. stellata had a suitable fatty acid profile for biodiesel production, as well as containing eicosapentaenoic acid (EPA) for nutraceutical applications. In addition, the content β-carotene, increased gradually as culture time was prolonged, resulting in its exclusive production at the end of cultivation. V. stellata is a promising microalgal strain for the production of biofuels and bioproducts.     

Microalgal Biomass and Lipid Production on Dairy Effluent Using a Novel Microalga, <Emphasis Type="Italic">Chlorella</Emphasis> sp. Isolated from Dairy Wastewater

The present study focused on cost-effective production of microalgal biomass and lipid production on dairy effluent. The novel microalga, Chlorella sp. isolated from the dairy effluent showed high growth and lipid production on the undiluted and two-fold diluted dairy effluent which were four to five times higher than those of Chlorella vulgaris (control). The high growth of Chlorella sp. was thought to be possibly due to its heterotrophic growth capacity, high turbidity, COD, nutrients and trace elements. In contrast, C. vulgaris showed poor heterotrophic and photoautotrophic growth under the highly turbid conditions of dairy effluent. Both Chlorella sp. and C. vulgaris showed similar total FAME (mg FAME/g algal cells). The fatty acid composition analysis revealed that both Chlorella sp. and C. vulgaris possessed major C18 and C20 fatty acids which will be used for biodiesel production. Overall, the novel microalga, Chlorella sp. isolated from the dairy effluent showed high potential for cost-effective algal cultivation and lipid production on dairy effluent without any modification of process.     

Effects of carbon source and light intensity on the growth and total lipid production of three microalgae under different culture conditions

We attempted to enhance the growth and total lipid production of three microalgal species, Isochrysis galbana LB987, Nannochloropsis oculata CCAP849/1, and Dunaliella salina, which are capable of accumulating high content of lipid in cells. Low nitrogen concentration under photoautotrophic conditions stimulated total lipid production, but a decreasing total lipid content and an increasing biomass were observed with increasing nitrogen concentration. Among the different carbon sources tested for heterotrophic cultivation, glucose improved the growth of all three strains. The optimal glucose concentration for growth of I. galbana LB987 and N. oculata CCAP849/1 was 0.02 M, and that of D. salina was 0.05 M. Enhanced growth occurred when they were cultivated under heterotrophic or mixotrophic conditions compared with photoautotrophic conditions. Meanwhile, high total lipid accumulation in cells occurred when they were cultivated under photoautotrophic or mixotrophic conditions. During mixotrophic cultivation, biomass production was not affected significantly by light intensity; however, both chlorophyll concentration and total lipid content increased dramatically with increasing light intensity up to 150 µmol/m²/s. The amount and composition ratio of saturated and unsaturated fatty acids in cells were different from each other depending on both species and light intensity. The highest accumulation of total fatty acid (C16–C18) among the three strains was found from cells of N. oculata CCAP849/1, which indicates that this species can be used as a source for production of biodiesel.     

Potential Outdoor Cultivation of Green Microalgae Based on Response to Changing Temperatures and by Combining with Air Temperature Occurrence

In this study, our working hypothesis was to examine whether temperature alters biomass and metabolite production by microalgae according to strain. We also addressed whether it is possible to choose a strain suitable for growing in each season of a given region. A factorial experiment revealed a significant interaction between chlorophylls a and b (Chl a and Chl b), carotenoid/Chl (a?+?b) ratio, biomass and total lipid productivity of six green microalgae (four Chlorella spp., Chlorella sorokiniana and Neochloris oleoabundans) after 15 days at four temperatures. At 39/35 °C, two Chlorella sp. strains (IPR7115 and IPR7117) showed higher total carotenoids/Chl (a?+?b) (0.578 and 0.830), respectively. N. oleoabundans had the highest Chl a (8210 μg L^?1) and Chl b (1909 μg L^?1) at 19/15 °C and highest maximum dry biomass (2900 mg L^?1), specific growth rate (0.538 day^?1) and total lipids (1003 mg L^?1) at 15/8 °C. We applied a method to infer the growth of these six green microalgae in outdoor ponds, as based on their response to changing temperatures and by combining with historical data on day/night air temperature occurrence for a given region. We conclude that the use of regionalized maps based on air temperature is a good strategy for predicting microalgal cultivation in outdoor ponds based on their features and tolerance to changing temperature.     

Microalgae from the Selenastraceae as emerging candidates for biodiesel production: a mini review

Over the years, microalgae have been identified to be a potential source of commercially important products such as pigments, polysaccharides, polyunsaturated fatty acids and in particular, biofuels. Current demands for sustainable fuel sources and bioproducts has led to an extensive search for promising strains of microalgae for large scale cultivation. Prospective strains identified for these purposes were among others, mainly from the genera Hematococcus, Dunaliella, Botryococcus, Chlorella, Scenedesmus and Nannochloropsis. Recently, microalgae from the Selenastraceae emerged as potential candidates for biodiesel production. Strains from the Selenastraceae such as Monoraphidium sp. FXY-10, M. contortum SAG 47.80, Ankistrodesmus sp. SP2-15 and M. minutum were high biomass and lipid producers when cultivated under optimal conditions. A number of Selenastraceae strains were also reported to be suitable for cultivation in wastewater. This review highlights recent reports on potential strains from the Selenastraceae for biodiesel production and contrasts their biomass productivity, lipid productivity as well as fatty acid profile. Cultivation strategies employed to enhance their biomass and lipid productivity as well as to reduce feedstock cost are also discussed in this paper.     

Growth and photosynthetic activity of <Emphasis Type="Italic">Botryococcus braunii</Emphasis> biofilms

Botryococcus braunii is a green microalga capable of producing large amounts of external long-chain hydrocarbons suitable as a source of biofuel. There have been several studies indicating that cultures of B. braunii can reduce the energy and water requirement for mass biofuel production, especially if non-destructive extraction methods for milking hydrocarbons are used. Growing microalgae as a raw material for biofuel using conventional liquid-based cultivation (i.e., raceway ponds) has yet to be shown to be economically successful. An alternative solid growth (biofilm) cultivation method can markedly reduce the energy requirements and costs associated with the harvesting and dewatering processes. We evaluated the growth of biofilms of several strains of B. braunii (from races A, B, L and S) and found that three of the four tested races successfully grew to stationary phase in 10 weeks with no contamination. Among all races, B. braunii BOT22 (race B) reached the highest biomass and lipid yields (3.80 mg dry weight cm^?2 day^?1 and 1.11 mg dry weight cm^?2). Irrespective of the race, almost all photosynthetic parameters (F _V /F ₀ , PI_ABS and the OJIP curve) showed that the biofilm cultures were more stressed during lag and stationary phases than in logarithmic phase. We also studied the Botryococcus biofilm profiles using confocal microscopy and found that this method is suitable for estimating the overall biomass yield when compared with gravimetric measurement. In conclusion, the growth characteristics (biomass and lipid) and photosynthetic performance of all races indicated that B. braunii BOT22 is the most promising strain for biofilm cultivation.     

Isolation and screening of euryhaline <Emphasis Type="Italic">Tetraselmis</Emphasis> spp. suitable for large-scale outdoor culture in hypersaline media for biofuels

Natural saline lakes in Western Australia were sampled for microalgae species and strains with potential for large-scale outdoor cultivation over a wide range of salinities for biofuels production. Using a rational isolation and screening process, several Tetraselmis strains (Chlorophyta, Chlorodendrales) with a broad range of salinity tolerance were identified and were characterised further for their potential for biofuels production. Specific growth rates increased from 0.8 to 1.2 days^?1 when the medium salinity was decreased from 11 to 3 % (w/v) NaCl (1.88 to 0.51 M NaCl) in batch cultivation mode, thereby indicating quick adaptation to large salinity changes. In general, ash-free dry weight (AFDW), total lipid, protein and carbohydrate contents per cell were highest in the early stages of growth. Salinity increases led to an increase in cell AFDW, with the highest mean maximum of 2555?±?659 pg AFDW.cell^?1 at 11 % (w/v) NaCl in the strains Tetraselmis MUR 167 and MUR 219 which had been in culture for many years, as compared to the mean maximum of 981?±?141 pg AFDW.cell^?1 the in newly isolated strains MUR 230, 231, 232 and 233. Similar observations on total lipid, protein and carbohydrate content per cell were made between the two groups of strains. Overall, all strains yielded high biomass and total lipid productivities over a very wide range of salinities without large variation in their gross biochemical composition and growth pattern. Based on AFDW and total lipid productivity data, the order of preference for selecting strains for further investigation for large-scale culture was MUR 231?>?MUR 233?>?MUR 219?>?MUR 230?>?MUR 232?>?MUR 167. The Tetraselmis spp. were also very competitive as shown by the outdoor cultivation of diatom, Halamphora coffeaeformis MUR 158, in parallel with Tetraselmis sp. MUR 167 which resulted in the diatom being outcompeted by the green alga. Our results demonstrate the high commercial potential of euryhaline Tetraselmis spp. for cultivation over a broad range of salinity in outdoor cultures.     

Optimization of environmental parameters for <Emphasis Type="Italic">Nannochloropsis salina</Emphasis> growth and lipid content using the response surface method and invading organisms

Algae biofuel has the potential to replace fossil fuels. However, cultivation and productivity of target algae need improvement, while controlling undesired organisms that can lower the efficiency of production systems. A central composite design and response surface model were utilized to predict cultivation optima of marine microalga, Nannochloropsis salina, under a suite of environmental parameters. The effects of salinity, pH, and temperature and their interactions were studied on maximum sustainable yield (MSY, a measure for biomass productivity), lipid content of N. salina, and invading organisms. Five different levels of each environmental predictor variable were tested. The environmental factors were kept within ranges that had previously been determined to allow positive N. salina growth (14.5–45.5 PSU; pH 6.3–9.7; 11–29 °C). The models created for this experiment showed that N. salina’s MSY and lipid content are not strongly affected over the broad range of salinity and temperature values. Calculated optima levels were 28 PSU/20 °C for MSY and 14.5 PSU/20 °C for lipid accumulation, but neither value significantly influenced the model. However, pH was the most important factor to influence algae productivity, and pH optimum was estimated around 8. Both MSY and lipid content were strongly reduced when pH deviated from the optimum. Occurrence of invading organisms seemed stochastic, and none of the environmental factors studied significantly influenced abundance. In conclusion, pH should be kept around 8 for maximum productivity of N. salina. Temperature and salinity should be kept around 20 °C and 28 PSU; however, moderate variations are not too much of a concern and might enhance lipid content of N. salina.     

Enrichment as a screening method for a high-growth-rate microalgal strain under continuous cultivation system

Microalgae are a promising feedstock for renewable biodiesel production. High productivity of biodiesel production from microalgae is directly related to growth rate as well as lipid content of cells. In the present study, an enrichment process in a continuous cultivation system was developed to screen a high-growth-rate microalga from a mixed culture of microalgal species; Chlorella vulgaris, Chlorella protothecoides, and Chlamydomonas reinhardtii were used as test organisms for our experiments. The time-dependent washout of mixed microalgal pool was executed to successfully enrich the C. reinhardtii, which exhibits the higher growth rate than C. vulgaris and C. protothecoides under turbidostat conditions within 75 h. The domination of C. reinhardtii in the mixed culture was validated by on-line monitoring of growth rate and flowcytometric analysis. For the time-efficient production of microalgal biomass, this screening process has a high potential to segregate the fast-growing microalgal strains from the pool of various uncharacterized microalgal species and random mutants.     

The effect of gradual increase in salinity on the biomass productivity and biochemical composition of several marine,halotolerant<Emphasis Type="Bold">,</Emphasis> and halophilic microalgae

Open ponds are the preferred cultivation system for large-scale microalgal biomass production. To be more sustainable, commercial scale biomass production should rely on seawater, as freshwater is a limiting resource, especially in places with high irradiance. If seawater is used for both pond fill and evaporative volume makeup, salinity of the growth media will rise over time. It is not possible for any species to achieve optimum growth over the whole saline spectrum (from seawater salinity level up to salt saturation state). In this study, we investigated the effects of gradual salinity increase (between 35 and 233 ppt) on biomass productivity and biochemical composition (lipid and carbohydrate) of six marine, two halotolerant, and a halophilic microalgae. A gradual and slow stepped salinity increase was found to expand the salinity tolerance range of tested species. A gradual reduction in biomass productivity and maximum photochemical efficiency was observed as a consequence of increased salinity in all tested species. Among the marine microalgae, Tetraselmis showed highest biomass productivity (32 mg L^?1 day^?1) with widest salinity tolerance range (35 to 109 ppt). Halotolerant Amphora and Navicula were able to grow from 35 ppt to 129 ppt salinity. Halophilic Dunaliella was the only species capable of growing between 35 and 233 ppt and showed highest lipid content (56.2%) among all tested species. This study showed that it should be possible to maintain high biomass in open outdoor cultivation utilizing seawater by growing Tetraselmis, Amphora, and Dunaliella one after another as salinity increases in the cultivation system.     

Salinity tolerance of four freshwater microalgal species and the effects of salinity and nutrient limitation on biochemical profiles

Microalgae are ideal candidates for bioremediation and biotechnological applications. However, salinity and nutrient resource availability vary seasonally and between cultivation sites, potentially impacting on biomass productivity. The aim of this study was to screen pollutant-tolerant freshwater microalgae (Desmodesmus armatus, Mesotaenium sp., Scenedesmus quadricauda and Tetraedron sp.), isolated from Tarong power station ash-dam water, for their tolerance to cultivation at a range of salinities. To determine if biochemical composition could be manipulated, the effects of 4-day nutrient limitation were also determined. Microalgae were cultured at 2, 8, 11 and 18 ppt salinity, and nutrient uptake was monitored daily. Growth, total lipid, fatty acid (FA), and amino acid contents were quantified in biomass harvested while nutrient-replete and, after 4 days, nutrient-deplete. D. armatus showed the highest salinity tolerance actively growing in up to 18 ppt while Mesotaenium sp. was the least halotolerant with decreasing growth rates from 11 ppt. However, Mesotaenium sp. at 2 and 8 ppt had the highest biomass productivity and nutrient requirements of the four species, making it ideal for nutrient remediation of eutrophic freshwater effluents. Salinity and nutrient status had minimal influence on total lipid and FA contents in D. armatus and Mesotaenium sp., while nutrient depletion induced an increase of total lipid and FAs in S. quadricauda and Tetraedron sp., which was further increased with increasing salinity. As none of the growth conditions affected amino acid profiles of the species, these findings provide a basis for species selection based on site-specific salinity conditions and nutrient resource availability.     

Mixotrophic cultivation of <Emphasis Type="Italic">Chlorococcum</Emphasis> sp. under non-controlled conditions using a digestate from pig manure within a biorefinery

A number of business opportunities may arise from microalgae and wastewater treatment becoming an integrated system, as biofuels and high-added value products could be obtained simultaneously. This study, performed under controlled and non-controlled conditions, aimed at cultivating Chlorococcum sp. using a digestate from pig manure as culture medium and assessing its growth and biochemical composition for further applications. Under controlled conditions, cultures of Chlorococcum sp. were established testing various digestate dilutions (v/v). It was found that all tested dilutions (up to 8% v/v) promoted a higher biomass density, compared to the control culture in modified Bold’s Basal Medium (modified BBM). Under non-controlled conditions, it was found that the biomass productivity using the digestate diluted 5.6% v/v (23.4 mg L^?1 day^?1) was statistically similar to the one obtained using modified BBM (26.4 mg L^?1 day^?1). The volatile fatty acids contained in the digestate might have allowed mixotrophic growth for Chlorococcum sp. The intracellular lipid content in Chlorococcum sp. remained constant throughout the experiments in both, treatment and control cultures, while carbohydrates increased from 20 to 45% of the cell dry weight in the treatment and from 20 to 42% in the control one. It was concluded that conditions of nitrogen starvation and fluctuating irradiance and temperature benefit carbohydrate accumulation in this strain, since intracellular carbohydrate content increased nearly two-fold during this period. Additionally, the obtained biomass has the potential to be used as feedstock for bioethanol production. This system can meet the concept of a microalgae-based biorefinery, in which biofuels and high-added value products are produced from microalgae and wastewater.     

Biomass composition of <Emphasis Type="Italic">Arthrospira platensis</Emphasis> during cultivation on industrial process water and harvesting

Microalgae have the ability to utilize nutrients from wastewater and use it for biomass production. The effluent from a biogas process was tested as a nutrient source for blue-green microalga Arthrospira platensis cultivation and compared with conventional synthetic medium. Cultivation was carried out in four different concentrations of industrial process water (25, 50, 75, and 100%). The biomass was then harvested by microfiltration, and centrifugation followed by freeze drying. Variations in biomass composition were studied, in order to investigate effects of industrial process water on A. platensis over 30 days of cultivation. Applied harvesting techniques were evaluated for their effect on physiochemical properties of the biomass. Arthrospira platensis was able to grow in all tested wastewater concentrations except 100%, however, increase of wastewater concentration in medium resulted in a decreased growth rate. Partial substitution of synthetic Zarrouk medium with 25% of wastewater showed no adverse effect on chemical composition of the biomass including high protein content (45–58% dry weight) and favorable fatty acid composition (42–45% PUFAs of total fatty acids). Evaluation by optical microscopy showed that microfiltration caused cell rupture at the moderate level while centrifugation had more severe effect on A. platensis. Effect of centrifugal forces and shear stress on A. platensis cells was confirmed by detecting lower lipid content in samples after applying both microfiltration and centrifugation due to cell content leakage.     

High biomass production and CO<Subscript>2</Subscript> fixation from biogas by <Emphasis Type="Italic">Chlorella</Emphasis> and <Emphasis Type="Italic">Scenedesmus</Emphasis> microalgae using tequila vinasses as culture medium

Tequila vinasses (TVs) generated during Tequila production are brown liquid residues rich in nutrients. The nutrient content of agro-industrial effluents represents an excellent resource to support low-cost biomass production of microalgae; nonetheless, it is crucial to select the suitable microalgal strain to attain the highest biomass production in each residue used. In this study, biomass production, CO₂ fixation from biogas, and cell compound accumulation by Chlorella vulgaris U162, Chlorella sp., Scenedesmus obliquus U169, and Scenedesmus sp. using biodigested and filtered TVs as culture medium were evaluated and compared with the conventional microalgal culture media, C30, BG-11, Bold 3N, and Bristol. The four microalgae evaluated attained the highest biomass production and CO₂ fixation rate cultured in both residues, accumulating mainly carbohydrates and proteins although the most appropriate microalga to be cultured in TVs was Chlorella sp., recording 2.30 g L^?1. Moreover, the nutrient ratio of filtered TVs was ideal to support biomass production while biodigested TVs need to be supplemented with nitrogen. Overall, these results demonstrated that tequila vinasses are an excellent resource to support high and quick biomass production of microalgae, which can be used to obtain biofuels as ethanol, biogas, and supplement food depicting an extra benefit during the appropriate disposal of this residue.     

An efficient method for the sequential production of lipid and carotenoids from the Chlorella Growth Factor-extracted biomass of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis>

Efficient methodology for simultaneous extraction of multiple bioactive compounds from microalgae still remains a major challenge. The present study provides a method for the sequential production of three major products: Chlorella Growth Factor (CGF, a nucleotide-peptide complex enriched with vitamins, minerals, and carbohydrates), lipid, and carotenoids from Chlorella vulgaris biomass in an economically feasible manner. After protein-rich CGF was extracted, the spent biomass was found to contain 12% lipid and 3% carotenoids when extracted individually, compared to that of the un-utilized (fresh) biomass (lipid, 14%; carotenoids, 4%). When extracted simultaneously using conventional methods, the yield of lipid from “CGF and carotenoids-extracted biomass,” and carotenoids from “CGF and lipid-extracted biomass” were significantly reduced (50%). However, simultaneous extraction using different solvent mixtures such as hexane:methanol:water and pentane:methanol:water mixture-augmented lipid yield by 38.5% and carotenoids by 14%, and additionally retained chlorophyll and its derivatives. Column chromatographic approach yielded sequential production of lipid (18%), lutein (9%) with better yields as well as without chlorophyll interference. Different geometric isomers of lutein all-E-(trans)-(3R,3′R,6′R)-β,ε-carotene-3,3′diol, 9Z(cis)-(3R,3′R,6′R)-β,ε-carotene-3,3′diol, and 13Z(cis)-(3R,3′R,6′R)-β,ε-carotene-3,3′diol were purified by HPLC and elucidated by CD, UV, NMR, FT-IR, and Mass spectra. In conclusion, the study provides an efficient and economically viable methodology for sequential production of lipid and lutein along with its geometrical isomers without chlorophyll influence and yield loss from the protein-rich CGF-extracted spent biomass of marine microalga, Chlorella vulgaris.     

Contribution of different arbuscular mycorrhizal fungal inoculum to <Emphasis Type="Italic">Elymus nutans</Emphasis> under nitrogen addition

Arbuscular mycorrhizal (AM) fungi are known to promote plant growth and nutrient uptake, but their role in nitrogen (N) uptake still remains unclear. Therefore, a pot experiment was set up to evaluate the impacts of N addition and AM inoculation (Diversispora eburnea, Claroideoglomus etunicatum, Paraglomus occultum, and their mixture) on AM root colonization, plant biomass, N and P nutrition in Elymus nutans. Our results showed that AM root colonization was unaffected by N addition but was significantly affected by different AM fungal species. D. eburnea and C. etunicatum showed significant higher root colonization than P. occultum. The E. nutans exhibited the highest biomass when inoculated with D. eburnea and significantly higher than non-mycorrhizal (the control) regardless of N addition. Under N addition treatment, D. eburnea significantly enhanced P content of roots, N content of shoots and roots, while AM mixture significantly enhanced shoot P content compared with non-mycorrhizal. However, N and P content in shoots and roots did not significantly vary among treatments when no N was added. In addition, inoculation with C. etunicatum and P. occultum showed no significant effect on plant biomass, N and P content regardless of N addition. In conclusion, this study revealed that the plant response to N addition depends on AM fungal species and also confirmed that significant functional diversity exists among AM fungal species.     

Lipid production by microalgae <Emphasis Type="Italic">Chlorella protothecoides</Emphasis> with volatile fatty acids (VFAs) as carbon sources in heterotrophic cultivation and its economic assessment

Volatile fatty acids (VFAs) that can be derived from food wastes were used for microbial lipid production by Chlorella protothecoides in heterotrophic cultures. The usage of VFAs as carbon sources for lipid accumulation was investigated in batch cultures. Culture medium, culture temperature, and nitrogen sources were explored for lipid production in the heterotrophic cultivation. The concentration and the ratio of VFAs exhibited significant influence on cell growth and lipid accumulation. The highest lipid yield coefficient and lipid content of C. protothecoides grown on VFAs were 0.187 g/g and 48.7 %, respectively. The lipid content and fatty acids produced using VFAs as carbon sources were similar to those seen on growth and production using glucose. The techno-economic analysis indicates that the biodiesel derived from the lipids produced by heterotrophic C. protothecoides with VFAs as carbon sources is very promising and competitive with other biofuels and fossil fuels.     

Phylogenetic characterization and morphological and physiological aspects of a novel acidotolerant and halotolerant microalga <Emphasis Type="Italic">Coccomyxa onubensis</Emphasis> sp. nov. (Chlorophyta,Trebouxiophyceae)

The genus Coccomyxa comprises green microalgae, which can be found worldwide in remarkably versatile aquatic and terrestrial ecosystems including symbiotic associations with a number of different hosts. In this study, we describe a new species, Coccomyxa onubensis, based on 18S and ITS ribosomal DNA (rDNA) sequence data. Coccomyxa onubensis was isolated from acidic water, and its ability to adapt to a wide range of acidic and alkaline pH values and to high salinity was analyzed. The long-term adaptation capacity of the microalga to such extreme conditions was evaluated by performing continuous repeated batches at selected salt concentrations and pH values. Adapted cultures of C. onubensis were found to yield high biomass productivities from pH 2.5 to 9, with maximum yields at acidic pH between 2.5 and 4.5. Moreover, C. onubensis was also found to adapt to salinities as high as 0.5 M NaCl, reaching biomass productivities that were similar to those of control cultures. Ultrastructural analysis by transmission electron microscopy of C. onubensis cells adapted to high salinity showed a robust response to hyperosmotic shock. Thus, C. onubensis was found to be acidotolerant and halotolerant. High biomass productivity over a wide range of pH and salinities denotes C. onubensis as an interesting candidate for various biotechnological applications including outdoor biomass production.