Alpha-oxo semicarbazone peptide or oligodeoxynucleotide microarrays

We describe in this paper the preparation and characterization of semicarbazide glass slides and their use for the fabrication of microarrays using site-specific alpha-oxo semicarbazone ligation. The functional density and homogeneity of the semicarbazide glass slides were optimized by analyzing the reactivity of the layer toward a synthetic glyoxylyl fluorescent probe. Oligonucleotide microarrays were prepared by site-specific immobilization of glyoxylyl oligodeoxynucleotides. The slides were directly used in the hybridization assays using fluorescence detection and displayed a significant gain in sensibility as compared to the aldehyde glass slide/amino oligodeoxynucleotide chemistry. Semicarbazide slides were also used for the immobilization of a biotinylated peptide alpha-oxo aldehyde. The peptide microarrays allowed model interaction studies with streptavidin or an anti-biotin antibody.     

An Activated GOPS‐poly‐L‐Lysine‐ Coated Glass Surface for the Immobilization of 60mer Oligonucleotides

To explore a method for enhancing the immobilization and hybridization efficiency of oligonucleotides on DNA microarrays, conventional protocols of poly‐L‐lysine coating were modified by means of surface chemistry, namely, the slides were prepared by the covalently coupling of poly‐L‐lysine to a glycidoxy‐modified glass surface. The modified slides were then used to print microarrays for the detection of the SARS coronavirus by means of 60mer oligonucleotide probes. The characteristics of the modified slides concerning immobilization efficiency, hybridization dynamics, and probe stripping cycles were determined. The improved surface exhibited high immobilization efficiency, a good quality uniformity, and satisfactory hybridization dynamics. The spotting concentration of 10 μmol/L can meet the requirements of detection; the spots were approximately 170 nm in diameter; the mean fluorescence intensity of the SARS spots were between 3.2 × 10⁴ and 5.0 × 10⁴ after hybridization. Furthermore, the microarrays prepared by this method demonstrated more resistance to consecutive probe stripping cycles. The activated GOPS‐PLL slide could undergo hybridization stripping cycles for at least three cycles, and the highest loss in fluorescence intensity was found to be only 11.9 % after the third hybridization. The modified slides using the above‐mentioned method were superior to those slides treated with conventional approaches, which theoretically agrees with the fact that modification by surface chemistry attaches the DNA covalently firmly to the slides. This protocol may have great promise in the future for application in large‐scale manufacture.     

Quantitative aspects of the cytochemical Feulgen-DNA procedure studied on model systems and cell nuclei

Summary Quantitative aspects of DNA losses during fixation and pararosaniline(SO₂)-Feulgen staining of microscopic preparations were studied. The preparation of a new cytochemical model, consisting of DNA-protein layers (with thicknesses between 0.1 and 5.0 m) on microscopic glass slides is described and potentialities and limitations of this model are discussed.Polyacrylamide films into which high molecular weight calf thymus DNA or chicken erythrocyte nuclei had been constrained served as another model. As biological objects chicken erythrocyte nuclei and rat liver nuclei either in suspension or on microscopical glass slides were used.The experimental results indicate a loss of about 5% of the DNA due to the fixation procedure applied. Hydrolysis in 5 N HCl at room temperature, staining with the pararosaniline-Schiff medium and rinsing with sulfurous acid induced losses of DNA too, varying in amount depending on the type of preparation used. About 10% of the original DNA content is lost in total from chicken erythrocyte nuclei and rat liver nuclei dried on microscopical glass slides, from chicken erythrocyte nuclei constrained in polyacrylamide films, and from DNA-protein layers on microscopic glass slides. For nuclei fixed and stained in suspension the total losses amount to about 40%. The differences in losses between various types of preparations are discussed. Biochemically, the content of DNA originally present per chicken eythrocyte nucleus was determined to be 2.52 pg, a value, which is in good accordance with reliable biochemical data published already. It is shown that calibration of cytochemical staining intensities into biochemical units or absolute amounts of material by use of a model system, is only reliable when it is known or to be expected that both the loss of material due to fixation and staining, and the stoichiometric relation between material present and dye molecules is identical. The same holds for the application of internal biological reference systems.Supported by grant no. 28-394 of the Praeventiefonds, The HagueIn receipt of a grant from Het Ministerie van Onderwijs en Wetenschappen, Afdeling Buitenlandse Betrekkingen, The Netherlands     

Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization

A new type of coating for manufacturing DNA chips was constructed of the basis of an organic-inorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm2) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5-1.6 pmol/mm2. Immobilization with a higher density (10-12 pmol/mm2) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing selectively activated terminal phosphate groups. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.     

Efficient genetic analysis of fungal samples

We present a method for rapid genetic analysis of small amounts of fungal material. Sterile glass slides, sufficiently small to fit in a standard PCR tube, were placed on agar inside a Petri dish. After a few days, fungal cultures start to overgrow the glass slides. Glass slides with attached mycelium were harvested, analysed microscopically, and placed into a standard PCR tube. Conserved primers flanking the ITS regions of rDNA repeat were used in a direct PCR with the fungal material. Sequence data were generated to be included in phylogenetic analyses to investigate the relationships of the studied mycorrhizal fungi from orchids. The mycelium attached to glass slides was also used for an in situ hybridization experiment using fluorescent labelled oligonucleotides as probes. Fluorescent signal was found throughout the cytoplasm when a probe specific to a site in the nuclear small subunit rRNA is used.     

Oligonucleotide derivatives in the hybridization analysis of nucleic acids. I. Covalent immobilization of oligonucleotide probes on nylon

The characteristics of the UV-induced immobilization of oligonucleotides on nylon membranes and the efficiency of the enzymatic labeling of immobilized probes in heterophase identifying specific DNA sequences were studied. Oligonucleotides bound to short terminal oligothymidylates (up to 10 nt) through a flexible linker based on diethylene glycol phosphodiester are proposed as probes for immobilization on nylon. The presence of this fragment allows one to enhance the immobilization efficiency and reduce the UV-dependent degradation of the sequence-specific part of the probe by decreasing the irradiation dose needed for DNA immobilization. The optimal dose of UV irradiation is evaluated to be ∼0.4 J/cm² at 254 nm, which provides a high level of the hybridization signal for immobilized probes of various nucleotide sequences. It was found that nylon amide groups play a key role in the photoinduced fixation of oligonucleotides to the polymer surface, while its primary amino groups were not as responsible for the covalent binding of DNA as previously thought. Various additives in the membrane wetting solution were demonstrated to influence both the efficiency of the UV-induced immobilization and the functional integrity of immobilized probes. Other radical generating systems alternative to UV irradiation are shown to provide the immobilization of oligonucleotides on nylon membranes.     

Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization

A new type of coating for manufacturing DNA chips was constructed on the basis of an organicinorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm²) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5–1.6 pmol/mm². Immobilization with a higher density (10–12 pmol/mm²) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing a selectively activated terminal phosphate group. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.     

DNA Microarray for Rapid Detection of Mitochondrial DNA Haplotypes of Chum Salmon

For use in genetic stock identification, we developed an oligonucleotide (DNA) microarray hybridization method for rapid and accurate detection of nucleotide sequence variations in 20 previously identified variable nucleotide sites in about 500 bp within the 5 half of the control region of mitochondrial DNA of chum salmon (Oncorhynchus keta). The method includes immobilization of synthesized oligonucleotides containing respective polymorphic sites on a glass slide precoated with polycarbodiimide resin, a 2-hour hybridization with DNA microarray of biotinylated polymerase chain reaction fragments spanning the 5 variable portion followed by short washing, and visualization of hybridization signals by conventional ABC method and scanner-assisted computation of signal intensity on a computer. The entire process of hybridization and detection was completed within 4 hours. The resulting DNA microarray could detect all of the single nucleotide mutations and therefore could be used to identity the sequence variations defining 30 mtDNA haplotypes of chum salmon as revealed previously by nucleotide sequence analysis.     

用氨基修饰的载玻片制作cDNA微阵列

cDNA微阵列已在基因差异表达、寻找新基因等研究方面获得广泛应用,但有关cDNA微阵列的制作,目前多采用多聚赖氨酸修饰的载玻片为探针固定载体,固定效果较差.用氨基硅烷处理的载玻片为载体制作cDNA微阵列,然后考察其固定效率、检测灵敏度、稳定性、实用性等指标.结果表明,用氨基硅烷处理的载玻片具有比多聚赖氨酸更令人满意的核酸固定效率、检测灵敏度,且稳定实用.因此,用氨基硅烷修饰的载玻片为探针固定载体制作cDNA微阵列较为理想.     

A novel method for depositing erythroid cells onto glass slides for fetal cell analysis.

BACKGROUND: We have developed a method for selecting erythroblasts from blood, the first step toward identifying fetal cells in maternal blood for diagnostic purposes. Because the selection method results in a large number of positive cells, we needed to develop new methods to deposit the cells onto slides and to modify in situ hybridization procedures to enable detection of fetal cells. METHODS: We utilized Nunc flaskettes to increase the slide surface area available for cell deposition. The ability of erythroid lineage cells to adhere to several surface modifications was examined. In situ hybridization methods were tested to find the best approach that is compatible with these cell preparations. RESULTS: The best glass slide coating for erythroid cells was found to be an antibody to glycophorin A, a red cell surface antigen. We were able to get excellent in situ hybridization signals in cells on flaskettes by modifying fixation and pretreatment parameters. CONCLUSIONS: The methods described here appear to be the best way of attaching a large number of erythroid lineage cells to slides and of detecting them by in situ hybridization.     

用于寡核苷酸芯片制备载体的醛基载玻片的制备方法优化及性质研究

优化了醛基载玻片的制备方法 ,探讨了醛基修饰载玻片固定寡核苷酸探针的性质。研究发现氨基硅烷试剂的浓度是影响载玻片荧光背景的主要因素 ;2 %氨基化试剂处理 16min、戊二醛处理 30min可以得到荧光背景较低、固定效果较好的醛基载玻片。寡核苷酸固定过程中 ,末端氨基修饰没有明显的特异性 ,但是可以提高被固定探针的杂交容量。在较低的浓度 (小于 10 μmol L)时 ,探针的浓度与杂交信号趋近线性关系 ,浓度为 2 0 μmol L时杂交信号达到饱和     

Efficient surface patterning of oligonucleotides inside a glass capillary through oxime bond formation

The efficient surface patterning of oligonucleotides was accomplished onto the inner wall of fused-silica capillary tubes as well as on the surface of glass slides through oxime bond formation. The robustness of the method was demonstrated by achieving the surface immobilization of up to three different oligonucleotide sequences inside the same capillary tube. The method involves the preparation of surfaces grafted with reactive aminooxy functionalities masked with the photocleavable protecting group, 2-(2-nitrophenyl) propyloxycarbonyl group (NPPOC). Briefly, NPPOC-aminooxy silane 1 was prepared and used to silanize the glass surfaces. The NPPOC group was cleaved under brief irradiation to unmask the reactive aminooxy group on surfaces. These reactive aminooxy groups were allowed to react with aldehyde-containing oligonucleotides to achieve an efficient surface immobilization. The advantage associated with the present approach is that it combines the high-coupling efficiency of oxime bond formation with the convenience associated with the use of photolabile groups. The present strategy thus offers an alternative approach for the immobilization of biomolecules in the microchannels of "labs on a chip" devices.     

Hydrogel drop microchips with immobilized DNA: properties and methods for large-scale production

Although gel-based microchips offer significant advantages over two-dimensional arrays, their use has been impeded by the lack of an efficient manufacturing procedure. Here we describe two simple, fast, and reproducible methods of fabrication of DNA gel drop microchips. In the first, copolymerization method, unsaturated groups are chemically attached to immobilized molecules, which are then mixed with gel-forming monomers. In the second, simpler polymerization-mediated immobilization method, aminated DNA without prior modification is added to a polymerization mixture. Droplets of polymerization mixtures are spotted by a robot onto glass slides and the slides are illuminated with UV light to induce copolymerization of DNA with gel-forming monomers. This results in immobilization of DNA within the whole volume of semispherical gel drops. The first method can be better controlled while the second one is less expensive, faster, and better suited to large-scale production. The microchips manufactured by both methods are similar in properties. Gel elements of the chip are porous enough to allow penetration of DNA up to 500 nucleotides long and its hybridization with immobilized oligonucleotides. As shown with confocal microscope studies, DNA is hybridized uniformly in the whole volume of gel drops. The gels are mechanically and thermally stable and withstand 20 subsequent hybridizations or 30-40 PCR cycles without decrease in hybridization signal. A method for quality control of the chips by staining with fluorescence dye is proposed. Applications of hydrogel microchips in research and clinical diagnostics are summarized.     

Immunocytochemistry of 5-bromo-2′-deoxyuridine labelled oligonucleotide probes

Summary A synthetic oligonucleotide probe, complementary to oxytocin m-RNA was labelled enzymatically with 5-bromo-2-deoxyuridine (5-BrdU) and, with [-³²P]-ATP. The labelled probes were used for in situ, hybridization of histological sections of the mouse hypothalamus. A monoclonal antibody to 5-BrdU and the streptavidine-peroxidase technique were used in order to visualize hybridization with the 5-BrdU labelled probe. In situ hybridization with [³²P] labelling was detected autoradiographically. With both methods hybridized neurons were visible in the magnocellular hypothalamic nuclei. While immunostaining and radio-labelling provided similar localization of oxytocin m-RNA, only the immunocytochemical technique showed clear cellular resolution of the reaction product. In situ hybridization with 5-BrdU labelled probes followed by 5-BrdU immunocytochemistry seems to be a powerful alternative to common autoradiographic techniques.     

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5' overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.     

Peptide-protein microarrays for the simultaneous detection of pathogen infections

We describe novel peptide-protein microarrays, which were fabricated using semicarbazide glass slides that permitted the immobilization of glyoxylyl peptides by site-specific ligation and the immobilization of proteins by physisorption. The arrays permitted the simultaneous serodetection of antibodies directed against hepatitis C virus (HCV core p21 15-45 peptide, NS4 1925-1947 peptide, core, NS3, NS4, and mixture of core, NS3, NS4, and NS5 antigens), hepatitis B virus (HBc, HBe, and HBs), human immunodeficiency virus (Gp41 and Gp120 for HIV-I and Gp36 for HIV-II), Epstein-Barr virus (VCAp18 153-176 peptide), and syphilis (rTpN47 and rTpN17) antigens using an immunofluorescence assay. Peptide-protein microarrays displayed high signal-to-noise ratios, sensitivities, and specificities for the detection of antibodies as revealed by the analysis of a collection of human sera referenced against these five pathogens.     

Quantitative aspects of the cytochemical Feulgen-DNA procedure studied on model systems and cell nuclei

Quantitative aspects of DNA losses during fixation and pararosaniline(SO2)-Feulgen staining of microscopic preparations were studied. The preparation of a new cytochemical model, consisting of DNA-protein layers (with thicknesses between 0.1 and 5.0 micrometer) on microscopic glass slides is described and potentialities and limitations of this model are discussed. Polyacrylamide films into which high molecular weight calf thymus DNA or chicken erythrocyte nuclei had been constrained served as another model. As biological objects chicken erythrocyte nuclei and rat liver nuclei either in suspension or on microscopical glass slides were used. The experimental results indicate a loss of about 5% of the DNA due to the fixation procedure applied. Hydrolysis in 5 N HCl at room temperature, staining with the pararosaniline-Schiff medium and rinsing with sulfurous acid induced losses of DNA too, varying in amount depending on the type of preparation used. About 10% of the original DNA content is lost in total from chicken erythrocyte nuclei and rat liver nuclei dried on microscopical glass slides, from chicken erythrocyte nuclei constrained in polyacrylamide films, and from DNA-protein layers on microscopic glass slides. For nuclei fixed and stained in suspension the total losses amount to about 40%. The differences in losses between various types of preparations are discussed. Biochemically, the content of DNA originally present per chicken erythrocyte nucleus was determined to be 2.52 pg, a value, which is in good accordance with reliable biochemical data published already. It is shown that calibration of cytochemical staining intensities into biochemical units or absolute amounts of material by use of a model system, is only reliable when it is known or to be expected that both the loss of material due to fixation and staining, and the stoichiometric relation between material present and dye molecules is identical. The same holds for the application of internal biological reference systems.     

Ultrathin functional star PEG coatings for DNA microarrays

In this study, star PEG coatings on glass substrates have been used as support material for oligonucleotide microarrays. These coatings are prepared from solutions of six armed star shaped prepolymers that carry reactive isocyanate endgroups. As described earlier, such films prevent the adsorption of proteins and the adhesion of cells but can easily be functionalized for specific biological recognition. Here we used the high functionality of these coatings for the covalent immobilization of amino terminated 20mer oligonucleotides, both by microcontact printing and spotting techniques. The permanent immobilization of fluorescently labeled DNA as well as hybridization of 20mer oligonucleotides have been monitored by fluorescence microscopy. The hybridization efficiency as determined by fluorescence intensity varied from 30% to 80% depending on the way of layer preparation. The direct spotting without additional activation and blocking steps of the surface demonstrates the potential of star PEG coatings as ultrathin surface modification for microarrays.     

Immobilization of oligonucleotides on glass surface using an efficient heterobifunctional reagent through maleimide-thiol combination chemistry

An efficient heterobifunctional reagent, N-(3-triethoxysilylpropyl)-4-(N'-maleimidylmethyl) cyclohexanamide (TPMC), was developed for the immobilization of thiol-modified oligonucleotides on an unmodified glass surface. The heterobifunctionality of the reagent was used for the construction of a DNA microarray in which the triethoxysilyl functionality has specificity toward a glass surface, whereas the maleimide functionality has thiol-modified oligonucleotides via a stable thioether linkage. Immobilization of DNA was achieved by two alternative approaches. In the first approach, the reagent TPMC was treated with oligonucleotides to get triethoxysilyl-oligonucleotide conjugate, which was then covalently attached via specific triethoxysilyl functionality to an unmodified glass surface. In the second approach, the reagent was first covalently linked with an unmodified glass surface to get maleimide functionality on a glass surface, which was then used for the immobilization of oligonucleotides via a stable thioether linkage. The applicability of the reagent was explored by hybridization studies with the fluorescein-labeled complementary DNA strand and in mismatch discrimination.     

The search for an optimal DNA, RNA, and protein detection by in situ hybridization, immunohistochemistry, and solution-based methods

Clinical trials and correlative laboratory research are increasingly reliant upon archived paraffin-embedded samples. Therefore, the proper processing of biological samples is an important step to sample preservation and for downstream analyses like the detection of a wide variety of targets including micro RNA, DNA and proteins. This paper analyzed the question whether routine fixation of cells and tissues in 10% buffered formalin is optimal for in situ and solution phase analyses by comparing this fixative to a variety of cross linking and alcohol (denaturing) fixatives. We examined the ability of nine commonly used fixative regimens to preserve cell morphology and DNA/RNA/protein quality for these applications. Epstein-Barr virus (EBV) and bovine papillomavirus (BPV)-infected tissues and cells were used as our model systems. Our evaluation showed that the optimal fixative in cell preparations for molecular hybridization techniques was "gentle" fixative with a cross-linker such as paraformaldehyde or a short incubation in 10% buffered formalin. The optimal fixatives for tissue were either paraformaldehyde or low concentration of formalin (5% of formalin). Methanol was the best of the non cross-linking fixatives for in situ hybridization and immunohistochemistry. For PCR-based detection of DNA or RNA, some denaturing fixatives like acetone and methanol as well as "gentle" cross-linking fixatives like paraformaldehyde out-performed other fixatives. Long term fixation was not proposed for DNA/RNA-based assays. The typical long-term fixation of cells and tissues in 10% buffered formalin is not optimal for combined analyses by in situ hybridization, immunohistochemistry, or--if one does not have unfixed tissues--solution phase PCR. Rather, we recommend short term less intense cross linking fixation if one wishes to use the same cells/tissue for in situ hybridization, immunohistochemistry, and solution phase PCR.