Enhancing and inhibiting effects of benzenediols on chemiluminescence of a novel cyclometallated iridium(III) complex

A novel chemiluminescence (CL) system, including the cyclometallated iridium(III) complex {tris[1‐(2,6‐dimethylphenoxy)‐4‐(4‐chlorophenyl)phthalazine]iridium}, potassium permanganate and oxalic acid, is proposed for the determination of benzenediols. This method is based on the fact that hydroquinone and catechol exhibited an inhibiting effect, while resorcinol exhibited an enhancing effect on CL intensity. The optimum conditions for CL emission were investigated. Under optimal conditions, the detection limits of hydroquinone, catechol and resorcinol were 6.4 × 10^?8, 2.7 × 10^?9 and 8.1 × 10^?7 mol/L, respectively. The method has been successfully applied to the determination of benzenediols in different types of water sample. The luminophors of the CL systems were all identified as the metal–ligand charge‐transfer (MLCT) excited state of the iridium complex. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of colloidal β-cyclodextrins-Fe(3) O(4) magnetic nanoparticles on the chemiluminescence enhancement of luminol-Ag(III) complex for rapid and sensitive determination of cysteine in human serum

Colloidals solution of Fe₃O₄ magnetic nanoparticles (MNPs), capped with β‐cyclodextrins (β‐CD) as inclusion complexes, were found to enhance the chemiluminescence (CL) intensity of the luminol–diperiodatoargentate(III) (DPA) system. On injection of cysteine into the luminol–DPA–β‐CD–Fe₃O₄ MNPs inclusion complexes system, the CL intensity is strongly enhanced. The enhanced CL signal is ascribed to the catalytic effect of Fe₃O₄ MNPs capped with β‐CD, which is assumed to stabilize the CL intermediate. Based on these findings, a rapid and sensitive assay was developed for the determination of cysteine in human serum. The effects of analytical variables on the CL signal were studied and optimized. Under the optimum conditions, the CL intensity was directly proportional to the concentration of cysteine in the range 8.0 × 10^–9–1.0 × 10^–6 mol/L. The detection limit was 2.8 × 10^–9 mol/L (3 S_b/m) and the relative standard deviation (RSD) for 10 replicate determinations of 1.0 × 10^–7 mol/L cysteine was 3.5%. The proposed method was applied to the sensitive determination of cysteine in human serum samples, and compared with the Ellman method with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Chemiluminescence determination of sulphite using a cyclometalated iridium complex as chemiluminescence reagent

A simple, fast and accurate chemiluminescence (CL) method for the determination of sulphite has been developed, based on its sensitizing effect on the CL reaction between a novel water‐soluble iridium complex, [(dpci)₂Ir(bvbbi)](PF₆) (dpci = 3,4‐diphenylcinnoline; bvbbi = N,N′‐bivinylester‐¹H,^1′H‐[2,2′] bibenzimidazole) and cerium(IV). Under the optimal experimental conditions, the increased CL response was linear, with the concentration of sulphite over the range 5.0 × 10^–7–5.0 × 10^–4 mol/L. The detection limit of the method was 1.6 × 10^–7 mol/L, with a relative standard deviation (RSD) of 2.7% for nine repetitive determination of 1.0 × 10^–4 mol/L sulphite. The method was successfully applied to the quantitative analysis of sulphite in sugar samples. The possible reaction mechanism of sulphite on the [(dpci)₂Ir(bvbbi)](PF₆)–cerium(IV) system is also briefly discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Electrophoresis–chemiluminescence detection of phenols catalyzed by hemin

Based on the catalytic activity of hemin, an efficient biocatalyst, an indirect capillary electrophoresis–chemiluminescence (CE‐CL) detection method for phenols using a hemin–luminol–hydrogen peroxide system was developed. Through a series of static injection experiments, hemin was found to perform best in a neutral solution rather than an acidic or alkaline medium. Although halide ions such as Br^? and F^? could further enhance the CL signal catalyzed by hemin, it is difficult to apply these conditions to this CE‐CL detection system because of the self‐polymerization of hemin, as it hinders the CE process. The addition of concentrated ammonium hydroxide to an aqueous/dimethyl sulfoxide solution of hemin–luminol afforded a stable CE‐CL baseline. The indirect CE‐CL detection of five phenols using this method gave the following limits of detections: 4.8 × 10^?8 mol/L (o‐sec‐butylphenol), 4.9 × 10^?8 mol/L (o‐cresol), 5.4 × 10^?8 mol/L (m‐cresol), 5.3 × 10^?8 mol/L (2,4‐dichlorophenol) and 7.1 × 10^?8 mol/L (phenol). Copyright © 2013 John Wiley & Sons, Ltd.     

Post‐chemiluminescence determination of chloramphenicol based on luminol–potassium periodate system

A post‐chemiluminescence (PCL) phenomenon was observed when chloramphenicol was injected into a mixture of luminol and potassium periodate after the chemiluminescence (CL) reaction of luminol–potassium periodate had finished. The possible reaction mechanism was proposed based on studies of the CL kinetic characteristics, the CL spectra, the fluorescence spectra and the UV‐vis absorption spectra of the related substances. Based on the PCL reaction, a rapid and sensitive method for the determination of chloramphenicol was established. The linear response range was 6.0 × 10^?7–1.0 × 10^?5 mol/L, with a correlation coefficient of 0.9986. The relative standard deviation (RSD) for 5.0 × 10^?6 mol/L chloramphenicol was 2.3% (n = 11). The detection limit was 1.6 × 10^?7 mol/L. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensitive determination of 2‐methoxyestradiol in pharmaceutical preparations and serum samples using flow injection chemiluminescence

A rapid and sensitive flow injection chemiluminescence (FI–CL) method is described for the determination of 2‐methoxyestradiol (2ME) based on enhancement of the CL intensity from a potassium ferricyanide–calcein system in sodium hydroxide medium. The optimum conditions for the CL emission were investigated. Under optimized conditions, a linear calibration graph was obtained over the range 1.0 × 10^‐8 to 1.0 × 10^‐6 mol/L (r = 0.998) 2ME with a detection limit (3σ) of 5.4 × 10^‐9 mol/L. The relative standard deviation (RSD) for 5.0 × 10^‐7 mol/L 2ME was 1.7%. As a preliminary application, the proposed method was successfully applied to the determination of 2ME in injection solutions and serum samples. The possible CL mechanism was also proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel chemiluminescence system for the determination of daidzein and its hydroxyl radical-scavenging capacity

A novel chemiluminescence (CL) system was established for the determinations of daidzein in pharmaceutical preparations and to assess its ability to scavenge hydroxyl radicals. It was shown that a strong CL signal generated when eosin Y was mixed with Fenton reagent was decreased significantly when daidzein was added to the reaction system due to partial scavenging of the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometric relationship with the daidzein concentration. Based on this, we developed a new method for the determination of daidzein, using a flow‐injection chemiluminescence (FI–CL) technique. Under the optimal conditions, the linear range of daidzein concentration was 8.0 × 10^–8–3.0 × 10^–6 mol/L (R = 0.9982), with a detection limit of 9.0 × 10^–9 mol/L (S:N = 3), and the RSD was 5.8% for 1.0 × 10^–6 mol/L daidzein (n = 11). This method was successfully used in the determination of daidzein in tablets and for evaluation of the hydroxyl radical‐scavenging capacity of daidzein. The possible reaction mechanism of the CL system is discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of chloramphenicol based on luminol–sodium periodate order‐transform second‐chemiluminescence reaction

A new chemiluminescence (CL) reaction was observed when chloramphenicol solution was injected into the mixture after the end of the reaction of alkaline luminol and sodium periodate or sodium periodate was injected into the reaction mixture of chloramphenicol and alkaline luminol. This reaction is described as an order‐transform second‐chemiluminescence (OTSCL) reaction. The OTSCL method combined with a flow‐injection technique was applied to the determination of chloramphenicol. The optimum conditions for the order‐transform second‐chemiluminescence emission were investigated. A mechanism for OTSCL has been proposed on the basis of the chemiluminescence kinetic characteristics, the UV‐visible spectra and the chemiluminescent spectra. Under optimal experimental conditions, the CL response is proportional to the concentration of chloramphenicol over the range 5.0 × 10^?7–5.0 × 10^?5 mol/L with a correlation coefficient of 0.9969 and a detection limit of 6.0 × 10^?8 mol/L (3σ). The relative standard deviation (RSD) for 11 repeated determinations of 5.0 × 10^?6 mol/L chloramphenicol is 1.7%. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Cupric oxide nanoparticles‐enhanced chemiluminescence method for measurement of β‐lactam antibiotics

A simple, sensitive cupric oxide nanoparticles (CuO NPs) enhanced chemiluminescence (CL) method was developed for the measurement of β‐lactam antibiotics, including amoxicillin and cefazolin sodium. The method was based on suppression of the CuO NPs–luminol–H₂O₂ CL reaction by β‐lactam antibiotics. Experimental parameters that influenced the inhibitory effect of the antibiotic drugs on the CL system, such as NaOH (mol/L), luminol (µmol/L), H₂O₂ (mol/L) and CuO NPs (mg/L) concentrations, were optimized. Calibration graphs were linear and had dynamic ranges of 1.0 × 10^–6 to 8.0 × 10^–6 mol/L and 3.0 × 10^–5 to 5.0 × 10^–3 mol/L for amoxicillin and cefazolin sodium, respectively, with corresponding detection limits of 7.9 × 10^–7 mol/L and 1.8 × 10^–5 mol/L. The relative standard deviations of five replicate measurements of 5.0 × 10^–6 amoxicillin and 5 × 10^–4 cefazolin sodium were 5.43 and 5.01%, respectively. The synthesized CuO NPs were characterized by X‐ray diffraction (XRD) and transmission electronmicroscopy (TEM). The developed approach was exploited successfully to measure antibiotics in pharmaceutical preparations. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of ampicillin sodium using the cupric oxide nanoparticles–luminol–H2O2 chemiluminescence reaction

A simple and sensitive chemiluminescence (CL) method has been developed for the determination of ampicillin sodium at submicromolar levels. The method is based on the inhibitory effect of ampicillin sodium on the cupric oxide nanoparticles (CuO NPs)–luminol–H₂O₂ CL reaction. Experimental parameters affecting CL inhibition including concentrations of CuO NPs, luminol, H₂O₂ and NaOH were optimized. Under optimum conditions, the calibration plot was linear in the analyte concentration range 4.0 × 10^‐7–4.0 × 10^‐6 mol/L. The limit of detection was 2.6 × 10^‐7 mol/L and the relative standard deviation (RSD) for six replicate determinations of 1 × 10^‐6 mol/L ampicillin sodium was 4.71%. Also, X–ray diffraction (XRD) and transmission electron microscopy (TEM) analysis were employed to characterize the CuO NPs. The utility of the proposed method was demonstrated by determining ampicillin sodium in pharmaceutical preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of trace amounts of dopamine by flow‐injection analysis coupled with luminol–Ag(III) complex chemiluminescence detection

A novel flow injection analysis‐direct chemiluminescence (FI‐CL) method has been developed for determination of trace amounts of dopamine (DA) based on the enhancing effect of DA on the CL reaction of luminol with an Ag(III) complex in alkaline solution. Under optimum conditions, CL intensities are proportional to the concentration of DA in the range of 1.0 × 10^?10 to 4.0 × 10^?8 mol L^?1. The detection limit is 3.0 × 10^?11 mol L^?1 for DA (3s), with a relative standard deviation (n = 13) of 2.3% for 1.0 × 10^?8 mol L^?1 DA. This method has also been applied for the determination of DA in commercial pharmaceutical injection samples. On the basis of the CL spectra and the results of the free‐radical trapping experiment of this work, a reaction mechanism for this CL reaction is proposed and discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence detection of trace iodide with flow injection analysis of KMnO4‐carbon dots system

Ultra‐weak chemiluminescence (CL) from the reaction of iodide and KMnO₄ was strongly enhanced by carbon nanodots (CNDs) in an acidic medium. The CL intensity was directly proportional to the concentration of iodide in the solution. Therefore, a flow‐injection CL system with high sensitivity, selectivity and reproducibility is proposed for the determination of iodide. The proposed method exhibited advantages over a linear range of 3.0 × 10^?6–1.0 × 10^?4 mol/L and had a detection limit of 3.5 × 10^?7 mol/L. The method was successfully applied to the evaluation of iodide in food samples with recoveries of between 96 and 103%. The relative standard deviations were 2.1 and 4.1% for intra‐ and inter‐assay precision, respectively.     

Flow‐injection chemiluminescence determination of diazepam by oxidation with N‐bromosuccinimide

A rapid and sensitive flow‐injection chemiluminescence (FI–CL) method is described for the determination of diazepam based on its reaction with N‐bromosuccinimide (NBS) in alkaline medium in the presence of dichlorofluorescein (DCF) as an effective energy‐transfer agent. Under optimum conditions, the proposed method allowed the measurement of diazepam over the range of 2.0 × 10^?6 to 2.0 × 10^?4 mol/L with a detection limit of 5.0 × 10^?7 mol/L. The relative standard deviation for 11 parallel measurements of 2.0 × 10^?5 mol/L diazepam was 2.1%. The method was applied satisfactorily for the determination of diazepam in pharmaceutical preparations, and the results agree well with those obtained by spectrophotometry. The use of the proposed system for the determination of diazepam in urine and plasma samples was also tested. The possible mechanism of the chemiluminescence reaction is discussed briefly. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemiluminescence method for the determination of piroxicam by the enhancement of the tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–cerium(IV) system and its application

A simple, rapid chemiluminescence (CL) method was described for the determination of piroxicam, a commonly used analgesic agent drug. A strong CL signal was detected when cerium(IV) sulphate was injected into tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–piroxicam solution. The CL signal was proportional to the concentration of piroxicam in the range 2.8 × 10^–8–1.2 × 10^–5 mol/L. The detection limit was 2 × 10^–8 mol/L and the relative standard deviation (RSD) was 3.7% (c = 7.0 × 10^–7 mol/L piroxicam; n = 11). The proposed method was applied to the determination of piroxicam in pharmaceutical preparations in capsules, spiked serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

Utility of gold nanoparticles in luminescence determination of trovafloxacin: comparison of chemiluminescence and fluorescence detection

Two novel sensitive sequential injection chemiluminescence analysis and fluorescence methods for trovafloxacin mesylate detection have been developed. The methods were based on the enhancement effect of gold nanoparticles on luminol–ferricyanide–trovafloxacin and europium(III)–trovafloxacin complex systems. The optimum conditions for both detection methods were investigated. The chemiluminescence signal was emitted due to the enhanced effect of gold nanoparticles on the reaction of luminol–ferricyanide–trovafloxacin in an alkaline medium. The response was linear over a concentration range of 1.0 × 10^–9 to 1.0 × 10^–2 mol/L (%RSD = 1.3), (n = 9, r = 0.9991) with a detection limit of 1.7 × 10^–10 mol/L (S/N = 3). The weak fluorescence intensity signal of the oxidation complex of europium(III)–trovafloxacin was strongly enhanced by gold nanoparticles and detected at λ_ex = 330 and λ_em = 540 nm. Fluorescence detection enabled the determination of trovafloxacin mesylate over a linear range of 1.0 × 10^–8 to 1.0 × 10^–3 mol/L (%RSD = 1.2), (n = 6, r = 0.9993) with a detection limit of 3.3 × 10^–9 mol/L. The proposed methods were successfully applied to the determination of the studied drug in its bulk form and in pharmaceutical preparations. The results were treated statistically and compared with those obtained from other reported methods. Copyright © 2015 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of haemoglobin in the blood

In this study, a sensitive and simple flow‐injection chemiluminescence (CL) method was developed for the quantitative analysis of haemoglobin. The method is based on the ability of haemoglobin to enhance the CL signal generated by a H₂O₂–K₄Fe(CN)₆–fluorescein alkaline system enhanced by CdTe quantum dots. Under the optimized conditions, haemoglobin can be detected in concentration range 7.35 × 10^–9–2.5 × 10^–6 mol/L, with a detection limit (3σ) of 1.8 × 10^–9 mol/L and a relative standard deviation (RSD; for 5 × 10^–7 mol/L haemoglobin) of 2.06% (n = 11). The present CL method was successfully applied for the determination of haemoglobin in three kinds of blood samples taken from an infant, an adult man, an adult woman and two reference samples. Compared with previous reports, the CL method described in this work is simple and rapid, with high sensitivity. Copyright © 2012 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of ofloxacin using the Ru(bpy)2(CIP)2+−Ce(IV) system and its application

This paper reports a flow‐injection chemiluminescence method for the determination of ofloxacin (OFLX) using the Ru(bpy)₂(CIP)²⁺–Ce(IV) system. Under the optimum conditions, the relative CL intensity was proportional to the concentration of OFLX in the range 3.0 × 10^–8–1.0 × 10^–5 mol/L and the detection limit was 4.2 × 10^–9 mol/L. The proposed method has been successfully applied to the determination of ofloxacin in pharmaceuticals and human urine. The chemiluminescence mechanism of the system is also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Flow‐injection determination of cysteine in pharmaceuticals based on luminol–persulphate chemiluminescence detection

A flow injection (FI) method is reported for the determination of l‐ cysteine, based on its enhancement on chemiluminescence (CL) emission of luminol oxidized by sodium persulphate in alkaline solution. The calibration graph was linear over the range 1.0 × 10^–9–5.0 × 10^–7 mol/L (r² = 0.9992), with relative standard deviations (RSDs) in the range 1.1–2.3% (n = 4). The limit of detection (3σ blank) was 5.0 × 10^–10 mol/L with a sample throughput of 120/h. The method was applied to pharmaceuticals and the results obtained were in reasonable agreement with the amount labelled. The proposed method was also applied to cysteine in synthetic amino acid mixtures. Calibration graphs of N‐acetylcysteine and glutathione over the range 1.0–50 × 10^–8 and 0.5–7.5 × 10^–7 mol/L were also established (r² = 0.998 and 0.9986) with RSDs in the range 1.0–2.0% (n = 4), and the limits of detection (3σ blank) were 5.0 × 10^–9 and 1.0 × 10^–8 mol/L, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Chemiluminescence behaviour of CdTe–potassium permanganate enhanced by sodium hexametaphosphate and sensitized sensing of l‐ascorbic acid

A highly sensitive flow‐injection chemiluminescence (FIA‐CL) method based on the CdTe nanocrystals and potassium permanganate chemiluminescence system was developed for the determination of l ‐ascorbic acid. It was found that sodium hexametaphosphate (SP), as an enhancer, could increase the chemiluminescence (CL) emission from the redox reaction of CdTe quantum dots with potassium permanganate in near‐neutral pH conditions. l ‐Ascorbic acid is suggested as a sensitive enhancer for use in the above energy‐transfer excitation process. Under optimal conditions, the calibration graph of emission intensity against logarithmic l ‐ascorbic acid concentration was linear in the range 1.0 × 10^?9–5.0 × 10^?6 mol/L, with a correlation coefficient of 0.9969 and relative standard deviation (RSD) of 2.3% (n = 7) at 5.0 × 10^?7 mol/L. The method was successfully used to determine l ‐ascorbic acid in vitamin C tablets. The possible mechanism of the chemiluminescence in the system is also discussed. Copyright © 2012 John Wiley & Sons, Ltd.