Construction and analysis of in vivo activity of E. coli promoter hybrids and promoter mutants that alter the -35 to -10 spacing

A series of promoter hybrids has been constructed by exchanging the ? 35 and ? 10 regions of lacUV5, tet, and trp promoters. These three promoters and the six hybrid promoters constructed from them have been inserted into a pKO plasmid which places galactokinase expression under the control of the inserted promoter. Additionally, promoter mutants were prepared which had altered the spacing between the ? 35 and ? 10 regions of the promoter. Derivatives of the tet promoter with one or two extra base pairs in this spacer region and constructions of the lac:: tet hybrid promoter with two different spacings have been inserted into the galactokinase expression plasmid. Measurements of galactokinase levels in strains harboring these plasmids permited the comparison of in vivo activities of the promoters. The strongest of the hybrid promoters (order: ? 35, ? 10) were trp:: lac and trp:: tet suggesting a high efficiency for the ? 35 region of the trp promoter. The weakest promoters were tet:: trp, lac:: trp and lac::tet indicating a weak ? 10 region for the trp promoter and the importance of ? 35 to ? 10 spacing. Analysis of activity of related promoters with differences in spacing indicated that a distance of 19 bp yields a very weak promoter, and that 18 bp is less active than the 17-bp spacing, which is the most frequently found spacing in promoters.     

The nucleotide sequence of IS5 from Escherichia coli

A 3-kb fragment of Haemophilus haemolyticus DNA which carries the HhaII restriction (r) and modification (m) genes has been cloned into the PstI site of pBR322 (Mann et al., 1978). When propagated in Escherichia coli, it was observed that spontaneous insertions of IS5 inactivated the restriction gene, producing r- mutants at a frequency of 10(-6). Electron microscopy, restriction-site mapping and sequence analysis of two r- plasmids have demonstrated the presence of IS5 at a single target site in both possible orientations. The complete nucleotide sequence of IS5 has been determined. It is 1195 bp long and has inverted terminal repeats of 16 bp. The target site for IS5 in this plasmid is 5'-CTAG. Approx. ten copies of IS5 were found to be present at about the same locations on the E. coli chromosome in various K-12 strains, using Southern hybridization analysis.     

A novel deletion found during cloning of a synthetic palindromic DNA

A 212-bp palindromic DNA comprising two copies of the left end of bacteriophage Mu was assembled from chemically synthesized oligonucleotides and inserted into plasmid pUC9. When cloned and propagated in Escherichia coli, the palindrome was found to be unstable and was generally lost. However, in a few cases, a precise, asymmetric deletion of one half of the insert was observed. This pattern of deletion suggests that the symmetry axis region of the palindrome was involved as recognition site in the deletion process.     

Cloning of small DNA fragments containing the Escherichia coli tryptophan operon promoter and operator

A41-bp AluI restriction fragment from the trp promoter-operator region has been cloned into the PvuII site of pBR322, regenerating PvuII sites. Transformants were selected on media that allowed the selection of trp-operator-bearing plasmids. The cloned 41-bp fragment can be released from the vector by PvuII digestion, and it possesses a functional promoter and operator as demonstrated by in vivo tests. The 41-bp fragment contains several restriction sites: HincII, TaqI, RsaI, and a HpaI site that is located at the center of the operator sequence. Two new operator derivatives, symmetrical about the HpaI site, were prepared from the 41-bp fragment by joining two right-side, or two left-side PvuII-HpaI pieces together at the HpaI site. These derivatives showed in vivo operator activity. Plasmids containing up to five copies of the 41-bp trp-promoter-operator fragment have been constructed. These plasmids should be useful in preparing large amounts of the 41-bp fragment.     

Physical and genetic characterization of cloned enterobactin genomic sequences from Escherichia coli K-12

We have cloned genes responsible for enterobactin synthesis (entD) and transport (fepA,fes) from Escherichia coli K-12. Relevant recombinant plasmids enabled EntD- and transport-defective mutants to grow on iron-limiting medium. Subcloning and deletion analysis demonstrated that the gene order is entD-fepA-fes. Protein synthesis studies in minicells suggest that FepA is first translated as an Mr 84 000 precursor, which is subsequently cleaved to the active Mr 81 000 receptor; the fes gene product is an Mr 44 000 protein; no polypeptide has been identified as the entD gene product.     

Analysis of plasmid genome evolution based on nucleotide-sequence comparison of two related plasmids of Escherichia coli

Plasmid Rsc13, a small derivative of the plasmid R1, contains a region necessary for replication as well as a complete copy (4957 bp) of the ampicillin resistance transposon, Tn3. We determined the nucleotide sequence of the replication region of Rsc13 to be 2937 bp and then compared this region (designated the 2.9-kb region) to the analogous region of pSM1, a small derivative of the plasmid R100 which has common ancestry with R1. Rsc13 and pSM1 were 96% homologous in this 2.9-kb region except for a discrete region of about 250 bp which showed only 44% homology. The sequence and distribution of nucleotide substitutions between Rsc13 and pSM1 supported a map of possible genes and sites which have previously been seen in the replication region of Rsc13 and pSM1 which showed only 44% homology. Analysis of the amino acid sequence and predicted conformation of the two RepA2 polypeptides, however, suggested that they were very similar. We proposed that the repA2 region of R1 and R100 was replaced by a substitution of a short DNA segment from another plasmid which was evolutionarily related to R1 and R100 but had more divergence. This event may have been mediated by a mechanism similar to that of gene conversion as described in eukaryotic systems.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.     

The nucleotide sequence of the yeast ARG4 gene

The complete nucleotide sequence of a 2296-bp DNA fragment containing the yeast (Saccharomyces cerevisiae) ARG4 gene has been determined. This gene specifies the synthesis of the arginine biosynthetic enzyme, argininosuccinate lyase (EC 4.3.2.1). The sequence contains one major open reading frame of 463 codons, giving a calculated M_r of 52010 for the protein, in good agreement with the experimentally determined value of 53 000. The sequence upstream from the ARG4 gene shares structural features in common with other yeast genes subject to general amino acid control.     

Stable integration of foreign DNA into the chromosome of the cyanobacterium Synechococcus R2

The blue-green alga, Synechococcus R2, is transformed to antibiotic resistance by chimeric DNA molecules consisting of Synechococcus R2 chromosomal DNA linked to antibiotic-resistance genes from Escherichia coli. Chimeric DNA integrates into the Synechococcus R2 chromosome by homologous recombination. The efficiency of transformation, as well as the stability of integrated foreign DNA, depends on the position of the foreign genes relative to Synechococcus R2 DNA in the chimeric molecule. When the Synechococcus R2 DNA fragment is interrupted by foreign DNA, integration occurs through replacement of chromosomal DNA by homologous chimeric DNA containing the foreign insert; transformation is efficient and the foreign gene is stable. Mutagenesis in some cases attends integration, depending on the site of insertion. Foreign DNA linked to the ends of Synechococcus R2 DNA in a circular molecule, however, integrates less efficiently. Integration results in duplicate copies of Synechococcus R2 DNA flanking the foreign gene and the foreign DNA is unstable. Transformation in Synechococcus R2 can be exploited to modify precisely and extensively the genome of this photosynthetic microorganism.     

Isolation and characterization of the dut gene of Escherichia coli. II. Restriction enzyme mapping and analysis of polypeptide products

Restriction endonuclease mapping of previously constructed dut plasmids has been carried out using the enzymes PvuI, PvuII and SacI. Various dut plasmids were also tested in the "maxicell" protein-synthesizing system. They all show two protein bands in common, one of Mr 16000 in agreement with the size previously reported for the purified dUTPase subunit (Shlomai and Kornberg, 1978). With the information obtained the structural gene for dUTPase can be assigned to a 950-bp SacI-PvuII fragment of the E. coli genome. Studies, described in the preceding paper, on the overproduction of dUTPase by bacterial strains carrying different dut plasmids strongly suggest that the dut gene is transcribed in the direction from the SacI site towards the PvuII site and that the SacI site is located within the dut control region. The second protein band observed in the "maxicell" experiments has an Mr of 23500. Its identity is unknown but it may represent a precursor of dUTPase or the product of a separate gene located between dut and pyrE.     

An in vitro method generating base substitutions in preselected regions of plasmid DNA: application to structural analysis of the replication origin of the Escherichia coli K-12 chromosome

A method for introducing base substitutions in defined regions of plasmid DNA has been developed. In principle, a circular heteroduplex DNA containing a gap is constructed by annealing of two kinds of linear molecules derived from the same plasmid: One is the molecule shortened either by exonucleolytic digestion from the termini generated at a restriction site or by removal of a region flanked by two restriction sites, and the other the full-length molecule linearized at a different site. The deleted region in the shorter linear molecule becomes a single-stranded gap in the circular heteroduplex DNA. The heteroduplex is then treated with sodium bisulfite that converts specifically cytosine residues to uracil residues in single-stranded regions. After filling in the gap by repair synthesis, transformation is carried out to isolate mutant plasmids. Since two kinds of circular heteroduplexes are formed by annealing in which the sequences in the gaps are complementary to each other, mutagenesis of both strands can be accomplished in one experiment. This method was applied to construction of mutants with base substitutions in the replication origin region (oriC) of the Escherichia coli K-12 chromosome which had previously been cloned in colicin E1 plasmid vectors, and various mutants in defined regions of oriC were successfully isolated at high efficiencies. Analysis of these mutants provided evidence that oriC contains special regions, designated spacers, which separate neighboring important sequences specifying interactions with initiation factors for DNA replication at precise distances.     

Expression plasmid vectors containing Escherichia coli tryptophan promoter transcriptional units lacking the attenuator

Two DNA fragments which contain the Escherichia coli tryptophan promoter-operator region but lack the attenuator have been used in the construction of a series of pAT153 based plasmids suitable for the regulated expression of foreign genes in E. coli. The first, a 139-bp HhaI fragment includes 59 bp of the trp leader sequence, ending within the “attenuator peptide” coding sequence, eleven codons from the N-terminus. A fusion-type expression plasmid incorporating this fragment has been constructed. The second, a 99-bp HaeIII-TaqI fragment contains no coding sequence but includes the “attenuator peptide” SD site situated 4 bp upstream of the TaqI site. This fragment has been incorporated in expression vectors which result in the direct expression of cloned gene sequences. To further maximise expression, plasmids with directly repeating trp promoter HaeIII-TaqI units have been constructed.     

Recombination following transformation of Escherichia coli by heteroduplex plasmid DNA molecules

Circular heteroduplex DNA molecules introduced into Escherichia coli-competent cells are converted to new recombinant plasmids as a result of enzymatic actions in vivo. A pair of plasmids with partial sequence homology were each linearized at a different position with restriction enzymes, and the termini were made flush with the single-strand-specific S1 nuclease. Duplex molecules were then formed by melting and annealing these plasmid DNAs together. In contrast to linear homoduplex molecules, heteroduplexes circularize and therefore transform E. coli efficiently. Unique DNA sequences on each of the parental strands in the transforming heteroduplexes can be selectively incorporated or deleted as a result of in vivo enzymatic activities in transformed cells. This method permits the generation of new recombinant sequences in vivo without relying solely on the presence of convenient restriction sites for manipulation of DNA fragments in vitro.