Analysis of protein interactions on protein arrays by a wavelength interrogation-based surface plasmon resonance biosensor

We have investigated whether surface plasmon resonance (SPR) sensors based on the wavelength interrogation are able to analyze protein interactions on protein arrays. The spectral SPR sensor was self-constructed and its detection limit, expressed as the minimal refractive index variation, was calculated to be 6.6x10(-5) with the signal fluctuation of 1.0x10(-5). The protein array surface was modified by a mixed thiol monolayer to immobilize proteins. Protein arrays were analyzed by the line-scanning mode of the SPR sensor, which scanned every 100 microm along the central line of array spots and the scanned results were presented by color spectra from blue to red. Glutathione S-transferase (GST)-rac1 caused a concentration-dependent increase of SPR wavelength shift on protein arrays. The surface structure of the protein arrays was analyzed by atomic force microscopy. Specific interactions of antigens with antibodies were analyzed on the protein arrays by using three antibodies and eight proteins. These results suggest that the wavelength interrogation-based SPR sensor can be used as the biosensor for the high-throughput analysis of protein interactions on protein arrays.     

High-throughput analysis of GST-fusion protein expression and activity-dependent protein interactions on GST-fusion protein arrays with a spectral surface plasmon resonance biosensor

We modified gold arrays with a glutathione (GSH) surface, and investigated high-throughput protein interactions with a spectral surface plasmon resonance (SPR) biosensor. We fabricated the GSH exterior on gold surfaces by successive modification with aminoethanethiol, 4-maleimidobutyric acid N-hydroxysuccinimide ester and GSH. We immobilized GST-Rac1, GST-RhoA, the GST-Rho-binding domain of rhotekin and the GST-p21-binding domain of PAK1 onto the GSH surface, and observed specific antigen-antibody interactions on the GST-fusion protein arrays. We determined the expression of GST-fusion proteins in Escherichia coli on the GSH surface with the SPR biosensor. We then analyzed the interactions of tissue transglutaminase (tTGase), a Ca2+-dependent enzyme, with RhoA and Rac1 on the GST-fusion protein arrays with the SPR biosensor. We found that tTGase interacted with RhoA and Rac1 in a Ca2+-dependent manner, indicating that the interactions were dependent on tTGase activity. In addition, transamidation of Rac1 by tTGase was dependent on Ca2+ concentration. We obtained similar results with GST pull-down assays. Thus, protein arrays prepared on the GSH surface provide a useful system for the high-throughput analysis of GST-fusion protein expression and activity-dependent protein interactions with the spectral SPR biosensors.     

Real-time protein biosensor arrays based on surface plasmon resonance differential phase imaging

This paper reports the application of differential phase surface plasmon resonance (SPR) imaging in two-dimensional (2D) protein biosensor arrays. Our phase imaging approach offers a distinct advantage over the conventional angular SPR technique in terms of utilization efficiency of optical sensor elements in the imaging device. In the angular approach, each biosensor site in the biosensor array requires a linear array of optical detector elements to locate the SPR angular dip. The maximum biosensor density that a two-dimensional imaging device can offer is a one-dimensional SPR biosensor array. On the other hand, the phase-sensitive SPR approach captures data in the time domain instead of the spatial domain. It is possible that each pixel in the captured interferogram represents one sensor site, thus offering high-density two-dimensional biosensor arrays. In addition, our differential phase approach improves detection resolution through removing common-mode disturbances. Experimental results demonstrate a system resolution of 8.8 x 10(-7)RIU (refractive index unit). Real-time monitoring of bovine serum albumin (BSA)/anti-BSA binding interactions at various concentration levels was achieved using a biosensor array. The detection limit was 0.77 microg/ml. The reported two-dimensional SPR biosensor array offers a real-time and non-labeling detection tool for high-throughput protein array analysis. It may find promising applications in protein therapeutics, drug screening and clinical diagnostics.     

Sensitivity enhancement of spectral surface plasmon resonance biosensors for the analysis of protein arrays

A novel method for sensitivity enhancement of spectral surface plasmon resonance (SPR) biosensors was presented by reducing the refractive index of the sensing prism in the analysis of protein arrays. Sensitivity of spectral SPR biosensors with two different prisms (BK-7, fused silica) was analyzed by net shifts of resonance wavelength for specific interactions of GST–GTPase binding domain of p21-activated kinase-1 and anti-GST on a mixed thiol surface. Sensitivity was modulated by the refractive index of the sensing prism of the spectral SPR biosensors with the same incidence angle. The sensitivity of a spectral SPR biosensor with a fused silica prism was 1.6 times higher than that with a BK-7 prism at the same incidence angle of 46.2°. This result was interpreted by increment of the penetration depth correlated with evanescent field intensity at the metal/dielectric interface. Therefore, it is suggested that sensitivity enhancement is readily achieved by reducing the refractive index of the sensing prism of spectral SPR biosensors to be operated at long wavelength ranges for the analysis of protein arrays.     

Carbohydrate-lectin interactions assessed by surface plasmon resonance

The specificity, the strength, the kinetics and some thermodynamic parameters of sugar-protein interactions are easily assessed by surface plasmon resonance (SPR). This paper intends to present both theoretical and practical considerations. This includes: the principle of SPR, the analysis according to Langmuir and Scatchard, the problems linked either to mass transport limitation, to the heterogeneity of the immobilized ligand density or to the non-linearity due to cluster effects. The non-linearity may be taken into account by either one of two ways: the fractal or the Sips approaches that have been developed with the aim of linearizing the data. In addition, selected data obtained by using either immobilized carbohydrates or immobilized lectins are summarized. The SPR has also been found useful to collect information concerning oligosaccharide structure as well as lectin-sugar specificity and to develop new tools with medical applications. Finally, a series of practical considerations are gathered in the hope of avoiding some of the common pitfalls arising in sugar-lectin interaction studies based on the use of SPR.     

Sensitivity of ex situ and in situ spectral surface plasmon resonance sensors in the analysis of protein arrays

We have investigated the sensitivity of ex situ (analysis under air condition) and in situ (analysis under liquid condition) spectral SPR sensors, which were self-constructed with fiber optic spectrometers. The sensitivity of SPR sensors was analyzed in the wavelength range of 550-780 nm by the interactions of streptavidin and biotinylated IgG, and the sensitivity was dependent on the wavelength of measurements. The sensitivity of an ex situ SPR sensor operated at the long wavelength range from 712 nm was approximately 2.6 times higher than that at the short wavelength range from 571 nm. In addition, the sensitivity of an ex situ spectral SPR sensor was about twice as high as that of an in situ spectral SPR sensor for the same resonance wavelength range. This was interpreted in that the difference in sensitivity between two SPR sensors was significantly caused by the evanescent field intensity at the metal/dielectric interface. Thus, it was suggested that ex situ spectral SPR sensors operated at the long wavelength range are sensitive biosensors for the high-throughput analysis of protein interactions on protein arrays.     

A fusion protein expression analysis using surface plasmon resonance imaging

A surface plasmon resonance (SPR) imaging system was constructed and used to detect the affinity-tagged recombinant proteins expressed in Escherichia coli. With regards to model proteins, the hexahistidine-ubiquitin-tagged human growth hormone (His(6)-Ub-hGH), glutathione S-transferase-tagged human interleukin-6 (GST-hIL6), and maltose-binding protein-tagged human interleukin-6 (MBP-hIL6) expressed in E. coli were analyzed. The cell lysates were spotted on gold thin films coated with 11-mercaptoundecanol (MUOH)/dextran derivatized with Ni(II)-iminodiacetic acid (IDA-Ni(II)), glutathione, or cyclodextrin. After a brief washing of the gold chip, SPR imaging measurements were carried out in order to detect the bound affinity-tagged fusion proteins. Using this new approach, rapid high-throughput expression analysis of the affinity-tagged proteins were obtained. The SPR imaging protein chip system used to measure the expression of affinity-tagged proteins in a high-throughput manner is expected to be an attractive alternative to traditional laborious and time-consuming methods, such as SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blots.     

Surface plasmon resonance imaging analysis of protein-protein interactions using on-chip-expressed capture protein

A surface plasmon resonance (SPR) imaging system, combined with a microwell gold chip for on-chip cell cultivation, was used to monitor protein-protein interactions. In particular, we developed an on-chip microscale cell cultivation system that integrates cell culture and on-chip analysis of protein-protein interactions on a single microwell chip in a time- and labor-saving manner. To assess the performance of this system in the analysis of protein-protein interactions, we conducted a series of protein-protein interaction analyses by measuring the binding of the yeast GAL4 dimerization domain (GAL4DD) to the GAL11 protein (GAL11P). Our system was found to enable the simple and rapid analysis of protein-protein interactions, requiring no special cell culturing equipment or recombinant protein expression prior to the immobilization of the purified proteins onto the chip. Our results demonstrate that the combination of an on-chip cell cultivation system and an SPR imaging system can be a useful tool to study protein-protein interactions without the need for time-consuming and labor-intensive protein preparation steps as well as fluorescent or other labeling of the interactants.     

Investigation of pH-dependent DNA-metal ion interactions by surface plasmon resonance

Ni(II) and Zn(II) M-DNA formation and denaturation of double-stranded DNA (dsDNA) by Cd(2+) were monitored by surface plasmon resonance (SPR). When exposed to immobilized 30 bp 50% GC dsDNA, Zn(2+) and Ni(2+) were found to give signals indicative of a conformational change at pH 8.5 but not 7.5, while Mg(2+) and Ca(2+) caused small changes at both pHs. The concentrations that gave 50% of the maximum responses were 0.06 and 0.50 mM for Zn(2+) and Ni(2+), respectively. At pH 8.5, Cd(2+) denatured over 40% of the dsDNA, while other metals denatured less than 5% of the DNA. Smaller pH-dependent signals were induced by Zn(2+), Ni(2+) or Cd(2+) with 50% GC single-stranded DNA (ssDNA), and with a homopolymer of d(T)30. Homopolymers d(A)30 and d(C)30 showed small signals that were largely independent of pH in the presence of Zn(2+) or Ni(2+).     

Characterization of Ca and phosphocholine interactions with C-reactive protein using a surface plasmon resonance biosensor

The interactions between Ca²⁺ and C-reactive protein (CRP) have been characterized using a surface plasmon resonance (SPR) biosensor. The protein was immobilized on a sensor chip, and increasing concentrations of Ca²⁺ or phosphocholine were injected. Binding of Ca²⁺ induced a 10-fold higher signal than expected from the molecular weight of Ca²⁺. It was interpreted to result from the conformational change that occurs on binding of Ca²⁺. Two sites with different characteristics were distinguished: a high-affinity site with K_D = 0.03 mM and a low-affinity site with K_D = 5.45 mM. The pH dependencies of the two Ca²⁺ interactions were different and enabled the assignment of the different sites in the three-dimensional structure of CRP. There was no evidence for cooperativity in the phosphocholine interaction, which had K_D = 5 μM at 10 mM Ca²⁺. SPR biosensors can clearly detect and quantify the binding of very small molecules or ions to immobilized proteins despite the theoretically very low signals expected on binding, provided that significant conformational changes are involved. Both the interactions and the conformational changes can be characterized. The data have important implications for the understanding of the function of CRP and suggest that Ca²⁺ is an efficient regulator under physiological conditions.     

Determination of organophosphorous pesticides by a novel biosensor based on localized surface plasmon resonance

Liquid and gas chromatography are commonly used to measure organophosphorus pesticides. However, these methods are relatively time consuming and require a tedious sample pretreatment. Here, we applied the localized surface plasmon resonance (LSPR) of gold nanoparticles covalently coupled with acetylcholinesterase (AChE) to create a biosensor for detecting an example of serial signals responding to paraoxon in the range of 1-100 ppb by an AChE modified LSPR sensor immersing in a 0.05 mM ACh solution. The underlying mechanism is that paraoxon prevents acetylcholine chloride (ACh) reacting with AChE by destroying the OH bond of serine in AChE. We found that the AChE modified LSPR sensors prepared by incubation with 12.5 mU/mL of AChE in phosphate buffer solution at pH 8.5 room temperature for 14 h have the best linear inhibition response with a 0.234 ppb limit of paraoxon detection. A 14% of inhibition on the sensor corresponds to the change of paraoxon concentration from 1 to 100 ppb. The sensor remained 94% of its original activity after six cycles of inhibition with 500 ppb paraoxon followed with reactivation of AChE by 0.5 mM 2-pyriding-aldoxime methoiodide (2-PAM). In addition, the sensor retains activity and gives reproducible results after storage in dry state at 4 degrees C for 60 days. In conclusion, we demonstrated that the AChE modified LSPR sensors can be used to determine the concentration of paraoxon biosensor with high sensitive and stable characteristics.     

Evaluation of alpha-D-mannopyranoside glycolipid micelles-lectin interactions by surface plasmon resonance method

It is established that achieving higher binding affinities in carbohydrate-protein interactions requires multivalent presentations of the sugar ligands at the receptor binding site. Several inhibition, calorimetric, mass balance, and other studies have reiterated the beneficial effects of molecular level clustering of the sugar ligands for tight binding to the receptors. We have undertaken an effort to study the multivalent effects involving larger assemblies, represented by micelles, and their lectin interactions. The micelles were constituted with monomer bearing one- or two-sugar moieties at the monomolecular level and with varying the distances between the sugar moieties. Micellar aggregation studies and dynamic light scattering (DLS) studies afforded details of the aggregation numbers and the hydrodynamic diameters of various glycolipid (GL) micelles. The GL micelles were used as analytes of surface plasmon resonance (SPR) experiments on a lectin concanavalin A (Con A)-immobilized surface. SPR studies of the micelle-lectin interactions demonstrate that the ligand-receptor binding can be fit into the bivalent analyte model of interaction. Furthermore, micelles formed from two-sugar containing GLs are able to elicit favorable kinetic association rate constants in comparison to the micelles constituted with one-sugar containing GLs. The kinetic rate constants across the micelles and the effect of the sugar valencies in the GLs are discussed.     

Label-free detection of 16S ribosomal RNA hybridization on reusable DNA arrays using surface plasmon resonance imaging

In this paper, we describe the detection of bacterial cell-extracted 16S ribosomal RNA (rRNA) using an emerging technology, surface plasmon resonance (SPR) imaging of DNA arrays. Surface plasmon resonance enables detection of molecular interactions on surfaces in response to changes in the index of refraction, therefore eliminating the need for a fluorescent or radioactive label. A variation of the more common SPR techniques, SPR imaging enables detection from multiple probes in a reusable array format. The arrays developed here contain DNA probes (15-21 bases) designed to be complementary to 16S rRNA gene sequences of Escherichia coli and Bacillus subtilis as well as to a highly conserved sequence found in rRNAs from most members of the domain Bacteria. We report species-specific hybridization of cell-extracted total RNA and in vitro transcribed 16S rRNA to oligonucleotide probes on SPR arrays. We tested multiple probe sequences for each species, and found that success or failure of hybridization was dependent upon probe position in the 16S rRNA molecule. It was also determined that one of the probes intended to bind 16S rRNA also bound an unknown protein. The amount of binding to these probes was quantified with SPR imaging. A detection limit of 2 micro g ml-1 was determined for fragmented E. coli total cellular RNA under the experimental conditions used. These results indicate the feasibility of using SPR imaging for 16S rRNA identification and encourage further development of this method for direct detection of other RNA molecules.     

Kinetic studies of RNA-protein interactions using surface plasmon resonance

Although structural, biochemical, and genetic studies have provided much insight into the determinants of specificity and affinity of proteins for RNA, little is currently known about the kinetics that underlie RNA-protein interactions. Protein-RNA complexes are dynamic, and the kinetics of binding and release could influence many processes, such as the ability of RNA-binding proteins to compete for binding sites, the sequential assembly of ribonucleoprotein complexes, and the ability of bound RNA to move between cellular compartments. Therefore, to attain a complete and biologically relevant understanding of RNA-protein interactions, complex formation must be studied not only in equilibrated reactions, but also as a dynamic process. BIACORE, a surface plasmon resonance-based biosensor technology, allows intermolecular interactions to be measured in real time, and can provide both equilibrium and kinetic information about complex formation. This technology is a powerful tool with which to study the dynamics of RNA-protein interactions. We have used BIACORE extensively to obtain detailed insight into the interaction between RNA and proteins carrying RNA recognition motif domains. Here we discuss the physical principles on which BIACORE is based, and the required instrumentation. We describe how to design well-controlled RNA-protein interaction experiments aimed at yielding high-quality data, and outline the steps required for data analysis. In addition, we present examples to illustrate how kinetic studies have provided us with unique insights into the interaction of the spliceosomal U1A protein and the neuronal HuD protein with their respective RNA targets.     

A surface plasmon resonance probe with a novel integrated reference sensor surface

A surface plasmon resonance (SPR) sensor probe with integrated reference surface is described. In order to fabricate the integrated reference surface, two dielectric layers with different thickness were deposited on the single gold SPR sensor surface via plasma polymerization of hexamethyldisiloxane. The working sensor surface was a 34 nm dielectric layer with immobilized bovine serum albumin (BSA) antigen and an adjacent thin 1 nm dielectric layer without BSA provided reference surface. A specific immunoreaction of anti-BSA antibody was detected after immersion of the SPR probe into sample solution. Simultaneous observation of reference and working surface response enabled determination of the immunoreaction without the need for the baseline measurement. Moreover, compensation of nonspecific adsorption could be confirmed using anti-human serum albumin antibody.     

Screening protein refolding using surface plasmon resonance

Surface plasmon resonance (SPR) measurements were used to screen refolding conditions to identify a physicochemical environment which gives an acceptable refolding yield for samples of glutathione-S-transferase (GST) denatured in 6 M guanidine hydrochloride and 32 mM dithiothreitol. The SPR measurements were performed on carboxymethylcellulose coated chips that could accommodate two separate flow paths. One side of the chip was derivatized with immobilized glutathione and the other with goat anti-GST antibody. This created a dual-derivatized chip capable of showing both the presence of GST and providing a measure of enzyme activity. The dual-derivatized chip could be regenerated using a two-step washing procedure and reused to analyze multiple samples from a screening study of protein refolding conditions. SPR measurements have been shown to be suitable for screening protein refolding conditions due to the high sensitivity, ease of chip regeneration and the ability to incorporate a control in the experimental design. The combination of such advantages with the high-throughput automated SPR systems currently available may be a valuable approach to determine conditions suitable for protein refolding following insoluble expression in a bacterial host.     

Quantitative serum proteomics from surface plasmon resonance imaging

The detection and quantification of specific proteins in complex mixtures is a major challenge for proteomics. For example, the development of disease-related biomarker panels will require fast and efficient methods for obtaining multiparameter protein profiles. We established a high throughput, label-free method for analyzing serum using surface plasmon resonance imaging of antibody microarrays. Microarrays were fabricated using standard pin spotting on bare gold substrates, and samples were applied for binding analysis using a camera-based surface plasmon resonance system. We validated the system by measuring the concentrations of four serum proteins using part of a 792-feature microarray. Transferrin concentrations were measured to be 2.1 mg/ml in human serum and 1.2 mg/ml in murine serum, which closely matched ELISA determinations of 2.6 and 1.2 mg/ml, respectively. In agreement with expected values, human and mouse albumin levels were measured to be 24.3 and 23.6 mg/ml, respectively. The lower limits of detection for the four measurements ranged from 14 to 58 ng/ml or 175 to 755 pm. Where purified target proteins are not available for calibration, the microarrays can be used for relative protein quantification. We used the antibody microarray to compare the serum protein profiles from three liver cancer patients and three non-liver cancer patients. Hierarchical clustering of the serum protein levels clearly distinguished two distinct profiles. Thirty-nine significant protein changes were detected (p < 0.05), 10 of which have been observed previously in serum. alpha-Fetoprotein, a known liver cancer marker, was observed to increase. These results demonstrate the feasibility of this high throughput approach for both absolute and relative protein expression profiling.     

Surface plasmon resonance imaging protein arrays for analysis of triple protein interactions of HPV, E6, E6AP, and p53

We have developed a surface plasmon resonance (SPR)-based protein microarray to study protein-protein interactions in a high-throughput mode. As a model system, triple protein interactions have been explored with human papillomaviral E6 protein, tumor suppressor p53, and ubiquitin ligase E6AP. Human papillomavirus (HPV) is known to be a causative agent of cervical cancer. Upon infection, the viral E6 protein forms a heterotrimeric protein complex with p53 and E6AP. The formation of the complex eventually results in the degradation of p53. In the present study, a GST-fused E6AP protein was layered onto a glutathione (GSH)-modified gold chip surface. The specific binding of GST-E6AP protein onto the gold chip surface was facilitated through the affinity of GST to its specific ligand GSH. The interacting proteins (E6 and/or p53) were then spotted. Detection of the interaction was performed using a SPR imaging (SPRI) technique. The resulting SPRI intensity data showed that the protein-protein interactions of E6AP, E6, and p53 were detected in a concentration-dependent manner, suggesting that the SPRI-based microarray system can be an effective tool to study protein-protein interactions where multiple proteins are involved.     

A surface plasmon resonance array biosensor based on spectroscopic imaging

We have developed a multi-element transduction system which combines conventional SPR spectroscopy with one-dimensional SPR microscopy to create an effective platform for monitoring binding events on macro- or micro-patterned receptor arrays created on disposable sensor chips. This creates an effective platform for monitoring simultaneous binding events on each of the regions patterned with the receptors. This system has been specifically designed with commercially available components to allow relatively easy duplication. Furthermore, this system can use a proven, simple method to compensate for changes in the bulk index of refraction of the solution containing the analytes due to changes in temperature or solute concentration with simple modifications to the sensor chips alone. Preliminary results demonstrate how this system can be used to monitor several independent biospecific binding events simultaneously.     

Real-time monitoring of cell-free protein synthesis on a surface plasmon resonance chip

Taking advantage of the "open" nature of cell-free protein synthesis, this study investigated the direct analysis of protein expression using a surface plasmon resonance sensor. During the on-chip incubation of the reaction mixture for cell-free protein synthesis, the expressed protein molecules were immobilized onto the surface of the chip, giving rise to a sensorgram signal, which enabled on-line monitoring of protein expression. In addition, we found that the expression of the aggregation-prone proteins could be effectively monitored. The ability to monitor these proteins was most likely through the instant isolation of the expressed protein molecules onto the solid surface of the chip.