Solution structure of drosomycin, the first inducible antifungal protein from insects.

Drosomycin is the first antifungal protein characterized recently among the broad family of inducible peptides and proteins produced by insects to respond to bacterial or septic injuries. It is a small protein of 44 amino acid residues extracted from Drosophila melanogaster that exhibits a potent activity against filamentous fungi. Its three-dimensional structure in aqueous solution was determined using 1H 2D NMR. This structure, involving an alpha-helix and a twisted three-stranded beta-sheet, is stabilized by three disulfide bridges. The corresponding Cysteine Stabilized alpha beta (CS alpha beta) motif, which was found in other defense proteins such as the antibacterial insect defensin A, short- and long-chain scorpion toxins, as well as in plant thionins and potent antifungal plant defensins, appears as remarkably persistent along evolution.     

Effect of mutations of N- and C-terminal charged residues on the activity of LCAT

On the basis of structural homology calculations, we previously showed that lecithin:cholesterol acyltransferase (LCAT), like lipases, belongs to the alpha/beta hydrolase fold family. As there is higher sequence conservation in the N-terminal region of LCAT, we investigated the contribution of the N- and C-terminal conserved basic residues to the catalytic activity of this enzyme. Most basic, and some acidic residues, conserved among LCAT proteins from different species, were mutated in the N-terminal (residues 1;-210) and C-terminal (residues 211;-416) regions of LCAT. Measurements of LCAT-specific activity on a monomeric substrate, on low density lipoprotein (LDL), and on reconstituted high density lipoprotein (rHDL) showed that mutations of N-terminal conserved basic residues affect LCAT activity more than those in the C-terminal region. This agrees with the highest conservation of the alpha/beta hydrolase fold and structural homology with pancreatic lipase observed for the N-terminal region, and with the location of most of the natural mutants reported for human LCAT. The structural homology between LCAT and pancreatic lipase further suggests that residues R80, R147, and D145 of LCAT might correspond to residues R37, K107, and D105 of pancreatic lipase, which form the salt bridges D105-K107 and D105-R37. Natural and engineered mutations at residues R80, D145, and R147 of LCAT are accompanied by a substantial decrease or loss of activity, suggesting that salt bridges between these residues might contribute to the structural stability of the enzyme.     

Buckwheat trypsin inhibitor with helical hairpin structure belongs to a new family of plant defence peptides

A new peptide trypsin inhibitor named BWI-2c was obtained from buckwheat (Fagopyrum esculentum) seeds by sequential affinity, ion exchange and reversed-phase chromatography. The peptide was sequenced and found to contain 41 amino acid residues, with four cysteine residues involved in two intramolecular disulfide bonds. Recombinant BWI-2c identical to the natural peptide was produced in Escherichia coli in a form of a cleavable fusion with thioredoxin. The 3D (three-dimensional) structure of the peptide in solution was determined by NMR spectroscopy, revealing two antiparallel α-helices stapled by disulfide bonds. Together with VhTI, a trypsin inhibitor from veronica (Veronica hederifolia), BWI-2c represents a new family of protease inhibitors with an unusual α-helical hairpin fold. The linker sequence between the helices represents the so-called trypsin inhibitory loop responsible for direct binding to the active site of the enzyme that cleaves BWI-2c at the functionally important residue Arg(19). The inhibition constant was determined for BWI-2c against trypsin (1.7×10(-1)0 M), and the peptide was tested on other enzymes, including those from various insect digestive systems, revealing high selectivity to trypsin-like proteases. Structural similarity shared by BWI-2c, VhTI and several other plant defence peptides leads to the acknowledgement of a new widespread family of plant peptides termed α-hairpinins.     

Novel Thionins from Black Seed (<Emphasis Type="Italic">Nigella sativa</Emphasis> L.) Demonstrate Antimicrobial Activity

Black seed (Nigella sativa) is known as a good source of various biologically active compounds which possess antimicrobial properties. One of our objectives was to elaborate methods of obtaining and extracting peptides from plants. In the current study, we discovered some biological effects of thionins from black seed, such as bactericidal and fungicidal effects. Isolation of thionins performed by combining acidic extraction and fractionation with various liquid chromatography methods. The N-terminal amino acid sequences were revealed using automated Edman degradation. The antimicrobial activity of thionins were evaluated by a microdilution broth assay. A fluorescent spectroscopy and an atomic force microscopy allow to investigate the features of mode of action of the thionins. The two novel peptides from black seed (N. sativa L.), a plant endemic to Central Asia. These peptides, named NsW1 and NsW2, have a high affinity with heparin, a polysaccharide glycosaminoglycan. These molecules were indentified as thionins, a well-known family of plant antimicrobial peptides. These thionins effectively inhibit viability of Bacillus subtilus, Staphylococcus aureus and Candida albicans that has been confirmed using a bacteriological and some biophysical techniques. Obtained data indicate that black seed thionins are biologically active molecules that may be considered to be perspective antibacterial agents.     

Identification and structural analysis of the antimicrobial domain in hipposin, a 51-mer antimicrobial peptide isolated from Atlantic halibut

Hipposin is a potent 51-mer antimicrobial peptide (AMP) from Atlantic halibut with sequence similarity to parasin (19-mer catfish AMP), buforin I (39-mer toad AMP), and buforin II (an active 21-mer fragment of buforin I), suggesting that the antimicrobial activity of these peptides might all be due to a common antimicrobial sequence motif. In order to identify the putative sequence motif, the antimicrobial activity of hipposin fragments against 20 different bacteria was compared to the activity of hipposin, parasin and buforin II. Neither parasin nor the 19-mer parasin-like fragment HIP(1-19) (differs from parasin in only three residues) that is derived from the N-terminal part (residues 1-19) of hipposin had marked antimicrobial activity. In contrast, the fragment HIP(16-36) (identical to buforin II) that is derived from the middle part of hipposin (residues 16-36) had such activity, indicating that this part of hipposin contained an antimicrobial sequence motif. The activity was enhanced when the parasin-like N-terminal sequence was also present, as the fragment HIP(1-36) which consists of residues 1-36 in hipposin was more potent than HIP(16-36). Extending HIP(1-36) with three C-terminal residues-thereby constructing the buforin I-like peptide HIP(1-39) (differs from buforin I in only three residues)-increased the activity further. Also, the presence of the C-terminal part of hipposin (residues 40-51) increased the activity, as hipposin was clearly the most potent of all the peptides that were tested. Circular dichroism structural analysis of the peptides revealed that they were all non-structured in aqueous solution. However, trifluoroethanol and the membrane-mimicking entities dodecylphosphocholine micelles and negatively charged liposomes induced (amphiphilic) alpha-helical structuring in hipposin. Judging from the structuring of the individual fragments, the tendency for alpha-helical structuring appeared to be greater in the C-terminal and the buforin II-like middle region of hipposin than in the parasin-like N-terminal region.     

The crystal structure of aminoglycoside-3'-phosphotransferase-IIa,an enzyme responsible for antibiotic resistance

A major factor in the emergence of antibiotic resistance is the existence of enzymes that chemically modify common antibiotics. The genes for these enzymes are commonly carried on mobile genetic elements, facilitating their spread. One such class of enzymes is the aminoglycoside phosphotransferase (APH) family, which uses ATP-mediated phosphate transfer to chemically modify and inactivate aminoglycoside antibiotics such as streptomycin and kanamycin. As part of a program to define the molecular basis for aminoglycoside recognition and inactivation by such enzymes, we have determined the high resolution (2.1A) crystal structure of aminoglycoside-3'-phosphotransferase-IIa (APH(3')-IIa) in complex with kanamycin. The structure was solved by molecular replacement using multiple models derived from the related aminoglycoside-3'-phosphotransferase-III enzyme (APH(3')-III), and refined to an R factor of 0.206 (R(free) 0.238). The bound kanamycin molecule is very well defined and occupies a highly negatively charged cleft formed by the C-terminal domain of the enzyme. Adjacent to this is the binding site for ATP, which can be modeled on the basis of nucleotide complexes of APH(3')-III; only one change is apparent with a loop, residues 28-34, in a position where it could fold over an incoming nucleotide. The three rings of the kanamycin occupy distinct sub-pockets in which a highly acidic loop, residues 151-166, and the C-terminal residues 260-264 play important parts in recognition. The A ring, the site of phosphoryl transfer, is adjacent to the catalytic base Asp190. These results give new information on the basis of aminoglycoside recognition, and on the relationship between this phosphotransferase family and the protein kinases.     

Linearization of a naturally occurring circular protein maintains structure but eliminates hemolytic activity

Cyclotides are a recently discovered family of disulfide rich proteins from plants that contain a circular protein backbone. They are exceptionally stable, as exemplified by their use in native medicine of the prototypic cyclotide kalata B1. The peptide retains uterotonic activity after the plant from which it is derived is boiled to make a medicinal tea. The circular backbone is thought to be in part responsible for the stability of the cyclotides, and to investigate its role in determining structure and biological activity, an acyclic derivative, des-(24-28)-kalata B1, was chemically synthesized and purified. This derivative has five residues removed from the 29-amino acid circular backbone of kalata B1 in a loop region corresponding to a processing site in the biosynthetic precursor protein. Two-dimensional NMR spectra of the peptide were recorded, assigned, and used to identify a series of distance, angle, and hydrogen bonding restraints. These were in turn used to determine a representative family of solution structures. Of particular interest was a determination of the structural similarities and differences between des-(24-28)-kalata B1 and native kalata B1. Although the overall three-dimensional fold remains very similar to that of the native circular protein, removal of residues 24-28 of kalata B1 causes disruption of some structural features that are important to the overall stability. Furthermore, loss of hemolytic activity is associated with backbone truncation and linearization.     

Probing the nucleotide-binding site of Escherichia coli succinyl-CoA synthetase.

Succinyl-CoA synthetase (SCS) catalyzes the reversible interchange of purine nucleoside diphosphate, succinyl-CoA, and Pi with purine nucleoside triphosphate, succinate, and CoA via a phosphorylated histidine (H246alpha) intermediate. Two potential nucleotide-binding sites were predicted in the beta-subunit, and have been differentiated by photoaffinity labeling with 8-N3-ATP and by site-directed mutagenesis. It was demonstrated that 8-N3-ATP is a suitable analogue for probing the nucleotide-binding site of SCS. Two tryptic peptides from the N-terminal domain of the beta-subunit were labeled with 8-N3-ATP. These corresponded to residues 107-119beta and 121-146beta, two regions lying along one side of an ATP-grasp fold. A mutant protein with changes on the opposite side of the fold (G53betaV/R54betaE) was unable to be phosphorylated using ATP or GTP, but could be phosphorylated by succinyl-CoA and Pi. A mutant protein designed to probe nucleotide specificity (P20betaQ) had a Km(app) for GTP that was more than 5 times lower than that of wild-type SCS, whereas parameters for the other substrates remained unchanged. Mutations of residues in the C-terminal domain of the beta-subunit designed to distrupt one loop of the Rossmann fold (I322betaA, and R324betaN/D326betaA) had the greatest effect on the binding of succinate and CoA. They did not disrupt the phosphorylation of SCS with nucleotides. It was concluded that the nucleotide-binding site is located in the N-terminal domain of the beta-subunit. This implies that there are two active sites approximately 35 A apart, and that the H246alpha loop moves between them during catalysis.     

Characterization of the active site and a unique uncompetitive inhibitor of the PPM1-type protein phosphatase PPM1D

Protein phosphatase magnesium-dependent 1, delta (PPM1D) is a member of the PPM1 (formerly PP2C) protein phosphatase family, and is induced in response to DNA damage. The overexpression of PPM1D is thought to exert oncogenic effects through the inhibition of tumor suppressor proteins. PPM1D shows high selectivity for the primary sequence in its substrates when compared with other phosphatases, but the mechanisms underlying substrate recognition by this enzyme is not clearly known. In our present study we wished to identify the active center and further elucidate the substrate preference of PPM1D, and to this end performed sequence alignments among the human PPM1 type phosphatases. The results of this analysis clearly showed that the putative active site residues of PPM1D are highly conserved among the PPM1 family members. Phosphatase analyses using PPM1D mutants further identified the metal-chelating residues and a phosphate binding residue. In kinetic analyses using a series of phosphorylated p53 peptide analogs, the introduction of acidic residues into the region flanking the sites of dephosphorylation enhanced their affinity with PPM1D. Homology modeling of PPM1D also revealed that PPM1D contains two characteristic loops, a Pro-residue rich loop on the opposite side of the active site and a basic-residue rich loop in the vicinity of the active site in the catalytic domain. Interestingly, nonhydrolyzable AP4-3E peptides derived from the acidic p53 peptide analogs very effectively blocked PPM1D activity in an uncompetitive manner, suggesting that AP4-3E peptides may be useful lead compounds in the development of novel inhibitors of PPM1D.     

Amino-acid sequence of toxin III of Naja haje.

The complete amino acid sequence of toxin III of Naja haje (72 residues) has been established mainly by use of a protein sequenator (identification of 70 residues). The two C-terminal residues have been determined by digestion with carboxypeptidases A and B. Addition of succinylated protein or peptide greatly improved the performance of the sequenator for the Edman degradation of peptides: on one peptide (39 residues) degradation went to step 34 with a protein program and on two peptides (10 and 13 residues) degradation reached the last amino acid with a peptide program (use of dimethylbenzylamine). Amino acid analysis of tryptic peptides obtained by digestion of the C-terminal cyanogen bromide peptide are in full agreement with the sequence established by automatic degradation. The sequence of toxin III of Naja haje is unique and is very similar to that of Naja nivea alpha (although there are 9 differences), of Naja melanoleuca b (11 differences) and also to that of Naja naja A (18 differences).     

Sequence-specific 1H NMR assignments and solution structure of bovine pancreatic polypeptide.

Sequence-specific 1H NMR assignments for the 36 residue bovine pancreatic polypeptide (bPP) have been completed. The secondary and tertiary structure of bPP in solution has been determined from experimental NMR data. It is shown that bPP has a very well-defined C-terminal alpha-helix involving residues 15-32. Although regular secondary structure cannot be clearly defined in the N-terminal region, residues 4-8 maintain a rather ordered conformation in solution. This is attributed primarily to the hydrophobic interactions between this region and the C-terminal helix. The two segments of the structure are joined by a turn which is poorly defined. The four end residues both at the N-terminus and the C-terminus are highly disordered in solution. The overall fold of the bPP molecule is very closely similar to that found in the crystal structure of avian pancreatic polypeptide (aPP). The RMS deviation for backbone atoms of residues 4-8 and 15-32 between the bPP mean structure and the aPP crystal structure is 0.65 A, although there is only 39% identity of the residues. Furthermore, the average conformations of some (mostly from the alpha-helix) side chains of bPP in solution are closely similar to those of aPP in the crystal structure. A large number of side chains of bPP, however, show significant conformational averaging in solution.     

Protein folding determinants: structural features determining alternative disulfide pairing in alpha- and chi/lambda-conotoxins

Alpha-conotoxins isolated from Conus venoms contain 11-19 residues and preferentially fold into the globular conformation that possesses a specific disulfide pairing pattern (C1-3, C2-4). We and others isolated a new family of chi-conotoxins (also called lambda conotoxins) with the conserved cysteine framework of alpha-conotoxins but with alternative disulfide pairing (C1-4, C2-3) resulting in the ribbon conformation. In both families, disulfide pairing and hence folding are important for their biological potency. By comparing the structural differences, we identified potential structural determinants responsible for the folding tendencies of these conotoxins. We examined the role of conserved proline in the first intercysteine loop and the conserved C-terminal amide on folding patterns of synthetic analogues of ImI conotoxin by comparing the isoforms with the regiospecifically synthesized conformers. Deamidation at the C-terminus and substitution of proline in the first intercysteine loop switch the folding pattern from the globular form of alpha-conotoxins to the ribbon form of chi/lambda-conotoxins. The findings are corroborated by reciprocal folding of CMrVIA chi/lambda-conotoxins. Substitution of Lys-6 from the first intercysteine loop of CMrVIA conotoxin with proline, as well as the inclusion of an amidated C-terminal shifted the folding preference of CMrVIA conotoxin from its native ribbon conformation toward the globular conformation. Binding assays of ImI conotoxin analogues with Aplysia and Bulinus acetylcholine binding protein indicate that both these substitutions and their consequent conformational change substantially impact the binding affinity of ImI conotoxin. These results strongly indicate that the first intercysteine loop proline and C-terminal amidation act as conformational switches in alpha- and chi/lambda-conotoxins.     

Leaf-specific thionins of barley-a novel class of cell wall proteins toxic to plant-pathogenic fungi and possibly involved in the defence mechanism of plants

A novel class of highly abundant polypeptides with antifungal activity has been detected in cell walls of barley leaves. Similar polypeptides known as thionins occur not only in monocotyledonous but also in various dictoyledonous plants. The leaf-specific thionins of barley are encoded by a complex multigene family, which consists of at least 50-100 members per haploid genome. All of these genes are confined to chromosome 6. The toxicity of these thionins for plant pathogenic fungi and the fact that their synthesis can also be triggered by pathogens strongly suggest that thionins are a naturally occurring, inducible plant protein possibly involved in the mechanism of plant defence against microbial infections.     

Solution structure of a lipid transfer protein extracted from rice seeds. Comparison with homologous proteins.

Nuclear magnetic resonance (NMR) spectroscopy was used to determine the three dimensional structure of rice nonspecific lipid transfer protein (ns-LTP), a 91 amino acid residue protein belonging to the broad family of plant ns-LTP. Sequence specific assignment was obtained for all but three HN backbone 1H resonances and for more than 95% of the 1H side-chain resonances using a combination of 1H 2D NOESY; TOCSY and COSY experiments at 293 K. The structure was calculated on the basis of four disulfide bridge restraints, 1259 distance constraints derived from 1H-1H Overhauser effects, 72 phi angle restraints and 32 hydrogen-bond restraints. The final solution structure involves four helices (H1: Cys3-Arg18, H2: Ala25-Ala37, H3: Thr41-Ala54 and H4: Ala66-Cys73) followed by a long C-terminal tail (T) with no observable regular structure. N-capping residues (Thr2, Ser24, Thr40), whose side-chain oxygen atoms are involved in hydrogen bonds with i + 3 amide proton additionally stabilize the N termini of the first three helices. The fourth helix involving Pro residues display a mixture of alpha and 3(10) conformation. The rms deviation of 14 final structures with respect to the average structure is 1.14 +/- 0.16 A for all heavy atoms (C, N, O and S) and 0.72 +/- 0.01 A for the backbone atoms. The global fold of rice ns-LTP is close to the previously published structures of wheat, barley and maize ns-LTPs exhibiting nearly identical pattern of the numerous sequence specific interactions. As reported previously for different four-helix topology proteins, hydrophobic, hydrogen bonding and electrostatic mechanisms of fold stabilization were found for the rice ns-LTP. The sequential alignment of 36 ns-LTP primary structures strongly suggests that there is a uniform pattern of specific long-range interactions (in terms of sequence), which stabilize the fold of all plant ns-LTPs.     

Synthesis, activity, and preliminary structure of the fourth EGF-like domain of thrombomodulin.

The fourth EGF-like domain of thrombomodulin (TM4), residues E346-F389 in the TM sequence, has been synthesized. Refolding of the synthetic product under redox conditions gave a single major product. The disulfide bonding pattern of the folded, oxidized domain was (1-3, 2-4, 5-6), which is the same as that found in EGF protein. TM4 was tested for TM anticoagulant activity because deletion and substitution mutagenesis experiments have shown that the fourth EGF-like domain of TM is essential for TM cofactor activity. TM4 showed no TM-like activity in two assay systems, both for inhibition of fibrin clot formation, and for cofactor activity in thrombin activation of protein C. A preliminary structure of TM4 was determined by 2D 1H NMR from 519 NOE-derived distance constraints. Distance geometry calculations yielded a single convergent structure. The structure resembles the structure of EGF and other known EGF-like domains but has some key differences. The central two-stranded beta-sheet is conserved despite the differences in the number of amino acids in the loops. The C-terminal loop formed by the disulfide bond between C372 and C386 in TM4 is five amino acids longer than the analogous loop between C33 and C42 of EGF protein. This loop appears to have a different fold in TM4 than in EGF protein. The loop forms the two outside strands of a broken, irregular tri-stranded beta-sheet, and amino acids H384-F389 lie between the two strands forming the middle strand of the sheet. Thus, although the C-terminus of EGF protein forms one of the outside strands of a tri-stranded antiparallel sheet, the C-terminus of TM4 forms the inside strand of an irregular tri-stranded parallel-anti-parallel sheet. The residues D349, E357, and E374, which were shown to be critical for cofactor activity by alanine scanning mutagenesis, all lie in a patch near the C-terminal loop, and are solvent accessible. The other critical residues, Y358 and F376, are largely buried and appear to play essential structural rather than functional roles.     

Defense peptides of plant immune system

Antimicrobial peptides (AMPs) are natural antibiotics produced by all living organisms to combat pathogens. They are important effector molecules of the immune system both in animals and plants. AMPs are diverse in structure and mode of action. Based on homology of amino acid sequences and 3D structures several AMP families have been distinguished. They are defensins, thionins, lipid transfer proteins, hevein- and knottin-like peptides, and cyclotides. AMPs display broad-spectrum antimicrobial activity and thus show promise for the development of disease- resistant crops by genetic engineering and for the production of new-generation drugs. In this paper, the properties of the main AMP families (defensins and hevein-like peptides) and of a new 4-Cys plant AMP family are reviewed.     

The crystal structure of DR2241 from Deinococcus radiodurans at 1.9 A resolution reveals a multi-domain protein with structural similarity to chelatases but also with two additional novel domains

A unique family of proteins have been identified in the Deinococcus genus with an N-terminal cobalamin (vitamin B(12)) chelatase domain denoted CbiX and an additional unique C-terminal domain with unknown function. Here we report the first crystal structure from this new family of proteins with the structure of Deinococcus radiodurans protein DR2241. The structure reveals a multi-domain protein where domains A (residues 1-132) has the same fold as the small CbiX (CbiX(S)), domains A and B (residues 1-272) follow the chelatase super-family fold and the two additional unique domains C and D have no structural homologues. Domain D harbours the sequence motifs CxxC and CxxxC, in which DR2241 gives the first evidence that these motifs bind a [4Fe-4S] iron-sulphur cluster. In solution there are indications of multimeric forms, and in the crystallographic asymmetric unit a tetramer is found where domains C and D are involved in stabilising the tetrameric assembly.     

NMR solution structure of viscotoxin C1 from Viscum album species Coloratum ohwi: toward a structure-function analysis of viscotoxins

The high resolution three-dimensional structure of the newly discovered plant viscotoxin C1, from the Asiatic Viscum album ssp. Coloratum ohwi, has been determined in solution by (1)H NMR spectroscopy at pH 3.6 and 285 K. The viscotoxin C1-fold, consisting of a helix-turn-helix motif and a short stretch of an antiparralel beta-sheet is very similar to that found for the highly similar viscotoxins A2 and A3 and for other related thionins. Different functional properties of members of the thionin family are discussed here in light of the structural and electrostatic properties. Among the very homologous family of alpha- and beta-thionins, known for their antimicrobial activity, the viscotoxin subfamily differs from the other members because of its high toxicity against tumoral cells. Key residues for the modulation of viscotoxin cytotoxicity have been identified on the basis of sequence and structural alignment.     

Three-dimensional structure in lipid micelles of the pediocin-like antimicrobial peptide curvacin A

The 3D structure of the membrane-permeabilizing 41-mer pediocin-like antimicrobial peptide curvacin A produced by lactic acid bacteria has been studied by NMR spectroscopy. In DPC micelles, the cationic and hydrophilic N-terminal half of the peptide forms an S-shaped beta-sheet-like domain stabilized by a disulfide bridge and a few hydrogen bonds. This domain is followed by two alpha-helices: a hydrophilic 6-mer helix between residues 19 and 24 and an amphiphilic/hydrophobic 11-mer helix between residues 29 and 39. There are two hinges in the peptide, one at residues 16-18 between the N-terminal S-shaped beta-sheet-like structure and the central 6-mer helix and one at residues 26-28 between the central helix and the 11-mer C-terminal helix. The latter helix is the only amphiphilic/hydrophobic part of the peptide and is thus presumably the part that penetrates into the hydrophobic phase of target-cell membranes. The hinge between the two helices may introduce the flexibility that allows the helix to dip into membranes. The helix-hinge-helix structure in the C-terminal half of curvacin A clearly distinguishes this peptide from the other pediocin-like peptides whose structures have been analyzed and suggests that curvacin A along with the structural homologues enterocin P and carnobacteriocin BM1 belong to a subgroup of the pediocin-like family of antimicrobial peptides.     

Motif refinement of the peroxisomal targeting signal 1 and evaluation of taxon-specific differences

Eukaryote peroxisomes, plant glyoxysomes and trypanosomal glycosomes belong to the microbody family of organelles that compartmentalise a variety of biochemical processes. The interaction between the PTS1 signal and its cognate receptor Pex5 initiates the major import mechanism for proteins into the matrix of these organelles. Relying on the analysis of amino acid sequence variability of known PTS1-targeted proteins and PTS1-containing peptides that interact with Pex5 in the yeast two-hybrid assay, on binding site studies of the Pex5-ligand complex crystal structure, 3D models and sequences of Pex5 proteins from various taxa, we derived the requirements for a C-terminal amino acid sequence to interact productively with Pex5. We found evidence that, at least the 12 C-terminal residues of a given substrate protein are implicated in PTS1 signal recognition. This motif can be structurally and functionally divided into three regions: (i) the C-terminal tripeptide, (ii) a region interacting with the surface of Pex5 (about four residues further upstream), and (iii) a polar, solvent-accessible and unstructured region with linker function (the remaining five residues). Specificity differences are confined to taxonomic subgroups (metazoa and fungi) and are connected with amino acid type preferences in region 1 and deviating hydrophobicity patterns in region 2.