Structure of Fab fragment of malaria transmission blocking antibody 2A8 against P. vivax P25 protein

Understanding the structural basis of recognition between antigen and antibody requires the structural comparison of free and complexed components. Previously, we have reported the crystal structure of the complex between Fab fragment of murine monoclonal antibody 2A8 (Fab2A8) and Plasmodium vivax P25 protein (Pvs25) at 3.2 Å resolution. We report here the crystallization and X-ray structure of native Fab2A8 at 4.0 Å resolution. The 2A8 antibody generated against Pvs25 prevents the formation of P. vivax oocysts in the mosquito, when assayed in membrane feeding experiment.Comparison of native Fab2A8 structure with antigen bound Fab2A8 structure indicates the significant conformational changes in CDR-H1 and CDR-H3 regions of V_H domain and CDR-L3 region of V_L domain of Fab2A8. Upon complex formation, the relative orientation between V_L and V_H domains of Fab2A8 is conserved, while significant differences are observed in elbow angles of heavy and light chains. The combing site residues of complexed Fab2A8 exhibited the reduced temperature factor compared to native Fab2A8, suggesting a loss of conformational entropy upon antigen binding.     

Affinity maturation increases the stability and plasticity of the Fv domain of anti-protein antibodies

The somatic mutations accumulated in variable and framework regions of antibodies produce structural changes that increase the affinity towards the antigen. This implies conformational and non covalent bonding changes at the paratope, as well as possible quaternary structure changes and rearrangements at the V_H-V_L interface. The consequences of the affinity maturation on the stability of the Fv domain were studied in a system composed of two closely related antibodies, F10.6.6 and D44.1, which recognize the same hen egg-white lysozyme (HEL) epitope. The mAb F10.6.6 has an affinity constant 700 times higher than D44.1, due to a higher surface complementarity to HEL. The structure of the free form of the Fab F10.6.6 presented here allows a comparative study of the conformational changes produced upon binding to antigen. By means of structural comparison, kinetics and thermodynamics of binding and stability studies on Fab and Fv fragments of both antibodies, we have determined that the affinity maturation process of anti-protein antibodies affects the shape of the combining site and the secondary structure content of the variable domain, stabilizes the V_H-V_L interaction, and consequently produces an increase of the Fv domain stability, improving the binding to antigen.     

Crystal structures of the pro-inflammatory cytokine interleukin-23 and its complex with a high-affinity neutralizing antibody

Interleukin (IL)-23 is a pro-inflammatory cytokine playing a key role in the pathogenesis of several autoimmune and inflammatory diseases. We have determined the crystal structures of the heterodimeric p19-p40 IL-23 and its complex with the Fab (antigen-binding fragment) of a neutralizing antibody at 2.9 and 1.9 Å, respectively. The IL-23 structure closely resembles that of IL-12. They share the common p40 subunit, and IL-23 p19 overlaps well with IL-12 p35. Along the hydrophilic heterodimeric interface, fewer charged residues are involved for IL-23 compared with IL-12. The binding site of the Fab is located exclusively on the p19 subunit, and comparison with published cytokine-receptor structures suggests that it overlaps with the IL-23 receptor binding site.     

Specific recognition of a DNA immunogen by its elicited antibody

DNA recognition by antibodies is a key feature of autoimmune diseases, yet model systems with structural information are very limited. The monoclonal antibody ED-10 recognizes one of the strands of the DNA duplex used in the immunogenic complex. Modifications of the 5' end decrease the binding affinity and short oligonucleotides retain high binding affinity. We determined crystal structures for the Fab bound to a 6-mer oligonucleotide containing the specific sequence that raised the antibody and compared it with the unliganded Fab. Only the first two bases from the 5' end (dTdC) display electron density and we observe four key hydrogen bonds at the interface. The thymine ring is stacked between TrpH50 and TrpH95, and the cytosine ring is packed against TyrL32. Upon DNA binding, TyrH97 and TrpH95 rearrange to allow subnanomolar binding affinity, five orders of magnitude higher than other reported complexes, possibly because of having gone through affinity maturation. This structure represents the first bona fide antibody DNA immunogen complex described in atomic detail.     

Crystal structure of maltooligosyltrehalose trehalohydrolase from Deinococcus radiodurans in complex with disaccharides

Trehalose (alpha-D-glucopyranosyl-1,1-alpha-D-glucopyranose) is a non-reducing diglucoside found in various organisms that serves as a carbohydrate reserve and as an agent that protects against a variety of physical and chemical stresses. Deinococcus radiodurans possesses an alternative biosynthesis pathway for the synthesis of trehalose from maltooligosaccharides. This reaction is mediated by two enzymes: maltooligosyltrehalose synthase (MTSase) and maltooligosyltrehalose trehalohydrolase (MTHase). Here, we present the 1.1A resolution crystal structure of MTHase. It consists of three major domains: two beta-sheet domains and a conserved glycosidase (beta/alpha)8 barrel catalytic domain. Three subdomains consisting of short insertions were identified within the catalytic domain. Subsequently, structures of MTHase in complex with maltose and trehalose were obtained at 1.2 A and 1.5 A resolution, respectively. These structures reveal the importance of the three inserted subdomains in providing the key residues required for substrate recognition. Trehalose is recognised specifically in the +1 and +2 binding subsites by an extensive hydrogen-bonding network and a strong hydrophobic stacking interaction in between two aromatic residues. Moreover, upon binding to maltose, which mimics the substrate sugar chain, a major concerted conformational change traps the sugar chain in the active site. The presence of magnesium in the active site of the MTHase-maltose complex suggests that MTHase activity may be regulated by divalent cations.     

Structure of IL-17A in Complex with a Potent, Fully Human Neutralizing Antibody

IL-17A is a pro-inflammatory cytokine produced by the newly identified Th17 subset of T-cells. We have isolated a human monoclonal antibody to IL-17A (CAT-2200) that can potently neutralize the effects of recombinant and native human IL-17A. We determined the crystal structure of IL-17A in complex with the CAT-2200 Fab at 2.6 Å resolution in order to provide a definitive characterization of the epitope and paratope regions. Approximately a third of the IL-17A dimer is disordered in this crystal structure. The disorder occurs in both independent copies of the complex in the asymmetric unit and does not appear to be influenced by crystal packing. The complex contains one IL-17A dimer sandwiched between two CAT-2200 Fab fragments. The IL-17A is a disulfide-linked homodimer that is similar in structure to IL-17F, adopting a cystine-knot fold. The structure is not inconsistent with the previous prediction of a receptor binding cavity on IL-17 family members. The epitope recognized by CAT-2200 is shown to involve 12 amino acid residues from the quaternary structure of IL-17A, with each Fab contacting both monomers in the dimer. All complementarity-determining regions (CDRs) in the Fab contribute to a total of 16 amino acid residues in the antibody paratope. In vitro affinity optimization was used to generate CAT-2200 from a parental lead antibody using random mutagenesis of CDR3 loops. This resulted in seven amino acid changes (three in VL-CDR3 and four in VH-CDR3) and gave an approximate 30-fold increase in potency in a cell-based neutralization assay. Two of the seven amino acids form part of the CAT-2200 paratope. The observed interaction site between CAT-2200 and IL-17A is consistent with data from hydrogen/deuterium exchange mass spectrometry and mutagenesis approaches.     

Improvement of an antibody neutralizing the anthrax toxin by simultaneous mutagenesis of its six hypervariable loops

The enhancement of antibody affinity by mutagenesis targeting only complementarity determining regions has the advantage of respecting the framework regions, which are important for tolerance if clinical use is envisaged. Here, starting from a Fab (antigen-binding fragment; 35PA₈₃) capable of neutralizing the lethal toxin of anthrax and having an affinity of 3.4 nM for its antigen, a phage-displayed library of variants where all six complementarity determining regions (73 positions) were targeted for mutagenesis was built. This library contained 5 × 10⁸ variants, and each variant carried four mutations on average. The library was first panned with adsorbed antigen and washes of increasing stringency. It was then screened in parallel with either small concentrations of soluble biotinylated antigen or adsorbed antigen and long elution times in the presence of soluble antigen. The stringencies of both selections were pushed as far as possible. Compared with 35PA₈₃, the best selected clone had an affinity enhanced 19-fold, to 180 pM, and its 50% inhibitory concentration was decreased by 40%. The results of the two selection methods were compared, and the generality of these methods was considered.     

Complex of a protective antibody with its Ebola virus GP peptide epitope: unusual features of a V lambda x light chain

13F6-1-2 is a murine monoclonal antibody that recognizes the heavily glycosylated mucin-like domain of the Ebola virus virion-attached glycoprotein (GP) and protects animals against lethal viral challenge. Here we present the crystal structure, at 2.0 Å, of 13F6-1-2 in complex with its Ebola virus GP peptide epitope. The GP peptide binds in an extended conformation, anchored primarily by interactions with the heavy chain. Two GP residues, Gln P406 and Arg P409, make extensive side-chain hydrogen bond and electrostatic interactions with the antibody and are likely critical for recognition and affinity. The 13F6-1-2 antibody utilizes a rare Vλ_x light chain. The three light-chain complementarity-determining regions do not adopt canonical conformations and represent new classes of structures distinct from Vκ and other Vλ light chains. In addition, although Vλ_x had been thought to confer specificity, all light-chain contacts are mediated through germ-line-encoded residues. This structure of an antibody that protects against the Ebola virus now provides a framework for humanization and development of a postexposure immunotherapeutic.     

Coevolution of Antibody Stability and Vκ CDR-L3 Canonical Structure

Antibodies recognize antigens through six hypervariable loops, five of which have a limited set of conformations known as canonical structures. For κ light chains, the majority of CDR-L3 [the third hypervariable loop of the light chain variable domain (V_L)] adopts the type 1 canonical structure (CS1), with a cis-proline at position 95. Here, we present the design and structural studies of the monoclonal antibody mAb15 and related mutants that contained a series of progressively germline mutations only in the heavy chain variable domain (V_H) that ultimately led to an increase of more than 11 °C in the melting temperature (T_m) of the antigen-binding fragment (Fab). The all-trans CDR-L3 structure in the wild type is significantly different from any known CDR-L3 canonical structures. In the thermally stable mutants, the L94^L-S95^L peptide bond adopts an energetically unfavorable non-X-proline cis conformation, but the overall CDR-L3 loop converted to CS1. The stabilized V_H appears to function as a specific molecular chaperone that facilitated the trans-cis isomerization of S95^L. Thus, it is plausible that proline is the evolutionary choice to maintain overall structure and stability for V_L. These results provide new insights into the evolution of CS1 and suggest a potential molecular switch mechanism at position 95 that links CDR-L3 structural diversity and antibody stability and will have implications for antibody engineering.     

Identification by surface plasmon resonance of the mycobacterial lipomannan and lipoarabinomannan domains involved in binding to CD14 and LPS-binding protein

The mycobacterial lipoglycans, lipomannan (LM) and lipoarabinomannan (LAM), regulate host defence mechanisms through their interaction with pattern recognition receptors such as Toll-like receptors (TLRs). We have developed a surface plasmon resonance assay to analyse the molecular basis for the recognition of Mycobacterium kansasii LM or LAM, by immobilized CD14 and LPS-binding protein (LBP) both being capable to promote presentation of bacterial glycolipids to TLRs. The affinity of either LM/LAM was higher to CD14 than to LBP. Kinetic and Scatchard analyses were consistent with a model involving a single class of binding sites. These interactions required the lipidic anchor, but not the carbohydrate domains, of LM or LAM. We also provide evidence that addition of recombinant LBP enhanced the stimulatory effect of LM or LAM on matrix metalloproteinase-9 expression and secretion in macrophages, through a TLR1/TLR2-dependent mechanism.     

Crystal structure of the middle domain of human poly(A)-binding protein-interacting protein 1

This communication describes SAXS data based global structures of tetravalent antibody CD4–IgG2 and its dimeric to pentameric complexes with gp120s. Comparison of models brought forth that while the two CD4s grafted on each arm remain tightly packed in the unliganded antibody, they enable binding of first two gp120s preferentially to the same Fab arm in an asymmetric manner. Retention of residues in the CD4–Fab linker earlier reasoned to enable bi-fold collapse of gp120-bound soluble CD4, and observed asymmetry of the (CD4–IgG2)/(gp120)₂ complex suggest that encoded flexibility in CD4–Fab linker is a critical structure–function factor for this broad spectrum neutralizing antibody.     

Structure-based stability engineering of the mouse IgG1 Fab fragment by modifying constant domains

A semi-rational approach based on structural data was exploited in a search for CH1 and CL domains with improved intrinsic thermodynamic stabilities. Structural and amino acid level comparisons were carried out against known biophysically well-behaving and thermodynamically beneficial scFv and Fab fragments. A number of mutant Fab fragments were constructed by site-directed mutagenesis of regions in the CH1 and CL domains expected to be most sensitive under physical stress conditions. These mutations were located on three sites in the Fab constant domains; a mobile loop in the CH1 domain, residues surrounding the two largest solvated hydrophobic cavities located in the interface of the CH1 and CL domains and the hydrophobic core regions of both CH1 and CL. Expression levels of functional Fab fragments, denaturant-induced unfolding equilibria and circular dichroism spectroscopy were used to evaluate the relative stabilities of the wild-type and the mutant Fab fragments. The highest thermodynamic stability was reached through the mutation strategy, where the hydrophobicity and the packing density of the solvated hydrophobic cavity in the CH1/CL interface was increased by the replacement of the hydrophilic Thr178 in the CL domain by a more hydrophobic residue, valine or isoleucine. The midpoint of the transition curve from native to unfolded states of the protein, measured by fluorescence emission, occurred at concentrations of guanidine hydrochloride of 2.4 M and 2.6 M for the wild-type Fab and the most stable mutants, respectively. Our results illustrate that point mutations targeted to the CH1/CL interface were advantageous for the overall thermodynamic stability of the Fab fragment.     

A structural perspective of the sequence variability within botulinum neurotoxin subtypes A1-A4

Botulinum neurotoxin (BoNT) is a category A toxin that has been classified within seven serotypes, designated A-G. Recently, it has been discovered that sequence variability occurs in BoNTs produced by serotype A (BoNT/A) variant strains, designated as subtypes A1 and A2, which have significantly different antibody-binding properties. We have therefore made efforts to understand at the molecular level the diversity and its effects on the biological actions of the toxin, including receptor binding, substrate recognition, and catalysis. We provide the results of these studies, including the analysis of two newly sequenced BoNT/A variants, Loch Maree (A3) and 657Ba (A4), and their comparison to A1 and A2. Using sequence analysis, available functional data, molecular modeling, and comparison of models with the crystal structures of BoNT/A1 and the light chain of BoNT/A2, we conclude that these sequence differences within subtypes will impact development of broad-spectrum antibody and small ligand therapeutics, and suggest dissimilarities in binding affinity and cleavage efficiency of the SNAP-25 substrate. In particular, sequence variation in subtypes BoNT/A3 and BoNT/A4 will likely effect alpha-exosite and S1' subsite recognition, respectively.     

Fab1p Is Essential for PtdIns(3)P 5-Kinase Activity and the Maintenance of Vacuolar Size and Membrane Homeostasis

The Saccharomyces cerevisiae FAB1 gene encodes a 257-kD protein that contains a cysteine-rich RING-FYVE domain at its NH₂-terminus and a kinase domain at its COOH terminus. Based on its sequence, Fab1p was initially proposed to function as a phosphatidylinositol 4-phosphate (PtdIns(4)P) 5-kinase (Yamamoto et al., 1995). Additional sequence analysis of the Fab1p kinase domain, reveals that Fab1p defines a subfamily of putative PtdInsP kinases that is distinct from the kinases that synthesize PtdIns(4,5)P₂. Consistent with this, we find that unlike wild-type cells, fab1Δ, fab1^tsf, and fab1 kinase domain point mutants lack detectable levels of PtdIns(3,5)P₂, a phosphoinositide recently identified both in yeast and mammalian cells. PtdIns(4,5)P₂ synthesis, on the other hand, is only moderately affected even in fab1Δ mutants. The presence of PtdIns(3)P in fab1 mutants, combined with previous data, indicate that PtdIns(3,5)P₂ synthesis is a two step process, requiring the production of PtdIns(3)P by the Vps34p PtdIns 3-kinase and the subsequent Fab1p- dependent phosphorylation of PtdIns(3)P yielding PtdIns(3,5)P₂. Although Vps34p-mediated synthesis of PtdIns(3)P is required for the proper sorting of hydrolases from the Golgi to the vacuole, the production of PtdIns(3,5)P₂ by Fab1p does not directly affect Golgi to vacuole trafficking, suggesting that PtdIns(3,5)P₂ has a distinct function. The major phenotypes resulting from Fab1p kinase inactivation include temperature-sensitive growth, vacuolar acidification defects, and dramatic increases in vacuolar size. Based on our studies, we hypothesize that whereas Vps34p is essential for anterograde trafficking of membrane and protein cargoes to the vacuole, Fab1p may play an important compensatory role in the recycling/turnover of membranes deposited at the vacuole. Interestingly, deletion of VAC7 also results in an enlarged vacuole morphology and has no detectable PtdIns(3,5)P₂, suggesting that Vac7p functions as an upstream regulator, perhaps in a complex with Fab1p. We propose that Fab1p and Vac7p are components of a signal transduction pathway which functions to regulate the efflux or turnover of vacuolar membranes through the regulated production of PtdIns(3,5)P₂.     

Production of authentic SARS-CoV M(pro) with enhanced activity: application as a novel tag-cleavage endopeptidase for protein overproduction

The viral proteases have proven to be the most selective and useful for removing the fusion tags in fusion protein expression systems. As a key enzyme in the viral life-cycle, the main protease (M(pro)) is most attractive for drug design targeting the SARS coronavirus (SARS-CoV), the etiological agent responsible for the outbreak of severe acute respiratory syndrome (SARS) in 2003. In this study, SARS-CoV M(pro) was used to specifically remove the GST tag in a new fusion protein expression system. We report a new method to produce wild-type (WT) SARS-CoV M(pro) with authentic N and C termini, and compare the activity of WT protease with those of three different types of SARS-CoV M(pro) with additional residues at the N or C terminus. Our results show that additional residues at the N terminus, but not at the C terminus, of M(pro) are detrimental to enzyme activity. To explain this, the crystal structures of WT SARS-CoV M(pro) and its complex with a Michael acceptor inhibitor were determined to 1.6 Angstroms and 1.95 Angstroms resolution respectively. These crystal structures reveal that the first residue of this protease is important for sustaining the substrate-binding pocket and inhibitor binding. This study suggests that SARS-CoV M(pro) could serve as a new tag-cleavage endopeptidase for protein overproduction, and the WT SARS-CoV M(pro) is more appropriate for mechanistic characterization and inhibitor design.     

Molecular modeling of the complex between Torpedo acetylcholine receptor and anti-MIR Fab198

Myasthenia gravis is a neuromuscular disorder caused by an antibody-mediated autoimmune response to the muscle-type nicotinic acetylcholine receptor (AChR). The majority of monoclonal antibodies (mAbs) produced in rats immunized with intact AChR compete with each other for binding to an area of the alpha-subunit called the main immunogenic region (MIR). The availability of a complex between the AChR and Fab198 (Fab fragment of the anti-MIR mAb198) would help understand how the antigen and antibody interact and in designing improved antibody fragments that protect against the destructive activity of myasthenic antibodies. In the present study, we modeled the Torpedo AChR/Fab198 complex, based primarily on the recent 4A resolution structure of the Torpedo AChR. In order to computationally dock the two structures, we used the ZDOCK software. The total accessible surface area change of the complex compared to those of experimentally determined antigen-antibody complexes indicates an intermediate size contact surface. CDRs H3 and L3 seem to contribute most to the binding, while L2 seems to contribute least. These data suggest mutagenesis experiments aimed at validating the model and improving the binding affinity of Fab198 for the AChR.     

Modulating the binding properties of an anti-17beta-estradiol antibody by systematic mutation combinations

The anti-17beta-estradiol antibody 57-2 has been a subject for several protein engineering studies that have produced a number of mutants with improved binding properties. Here, we generated a set of 16 antibody 57-2 variants by systematically combining mutations previously identified from phage display-derived improved antibody mutants. These mutations included three point mutations in the variable domain of the light-chain and a heavy-chain variant containing a four-residue random insertion in complementarity determining region CDR-H2. The antibody variants were expressed as Fab fragments, and they were characterized for affinity toward estradiol, for cross-reactivity toward three related steroids, and for dissociation rate of the Fab/estradiol complex by using time-resolved fluorescence based immunoassays. The double-mutant cycle method was used to address the cooperativity effects between the mutations. The experimental data were correlated with structural information by using molecular modeling and visual analysis of the previously solved antibody 57-2 crystal structures. These analyses provided information about the steroid-binding mode of the antibody, the potential mechanisms of individual mutations, and their mutual interactions. Furthermore, several combinatorial mutants with improved affinity and specificity were obtained. The capacity of one of these mutants to detect estradiol concentrations at a clinically relevant range was proved by establishing a time-resolved fluorescence based immunoassay.     

Interaction between the antigen and antibody is controlled by the constant domains: normal mode dynamics of the HEL-HyHEL-10 complex

The antigen binding fragment (Fab) of a monoclonal antibody (HyHEL-10) consists of variable domains (Fv) and constant domains (CL-CH1). Normal modes have been calculated from the three-dimensional structures of hen egg lysozyme (HEL) with Fab, those of HEL with Fv, and so on. Only a small structural change was found between HEL-Fab and HEL-Fv complexes. However, HEL-Fv had a one order of magnitude lower dissociation constant than HEL-Fab. The Calpha fluctuations of HEL-Fab differed from those of HEL-Fv with normal mode calculation, and the dynamics can be thought to be related to the protein-protein interactions. CL-CH1 may have influence not only around local interfaces between CL-CH1 and Fv, but also around the interacting regions between HEL and Fv, which are longitudinally distant. Eighteen water molecules were found in HEL-Fv around the interface between HEL and Fv compared with one water molecule in HEL-Fab. These solvent molecules may occupy the holes and channels, which may occur due to imperfect complementarity of the complex. Therefore, the suppression of atomic vibration around the interface between Fv and HEL can be thought to be related to favorable and compact interface formation by complete desolvation. It is suggested that the ability to control the antigen-antibody affinity is obtained from modifying the CL-CH1. The second upper loop in the constant domain of the light chain (UL2-CL), which is a conserved gene in several light chains, showed the most remarkable fluctuation changes. UL2-CL could play an important role and could be attractive for modification in protein engineering.     

Construction of a large phage-displayed human antibody domain library with a scaffold based on a newly identified highly soluble, stable heavy chain variable domain

Currently, almost all U.S. Food and Drug Administration-approved therapeutic antibodies and the vast majority of those in clinical trials are full-size antibodies mostly in an immunoglobulin G1 format of about 150 kDa in size. Two fundamental problems for such large molecules are their poor penetration into tissues (e.g., solid tumors) and poor or absent binding to regions on the surface of some molecules [e.g., on the human immunodeficiency virus envelope glycoprotein (Env)] that are accessible by molecules of smaller size. We have identified a phage-displayed heavy chain-only antibody by panning of a large (size, ∼ 1.5 × 10¹⁰) human naive Fab (antigen-binding fragment) library against an Env and found that the heavy chain variable domain (V_H) of this antibody, designated as m0, was independently folded, stable, highly soluble, monomeric, and expressed at high levels in bacteria. m0 was used as a scaffold to construct a large (size, ∼ 2.5 × 10¹⁰), highly diversified phage-displayed human V_H library by grafting naturally occurring complementarity-determining regions (CDRs) 2 and 3 of heavy chains from five human antibody Fab libraries and by randomly mutating four putative solvent-accessible residues in CDR1 to A, D, S, or Y. The sequence diversity of all CDRs was determined from 143 randomly selected clones. Most of these V_Hs were with different CDR2 origins (six of seven groups of V_H germlines) or CDR3 lengths (ranging from 7 to 24 residues) and could be purified directly from the soluble fraction of the Escherichia coli periplasm. The quality of the library was also validated by successful selection of high-affinity V_Hs against viral and cancer-related antigens; all selected V_Hs were monomeric, easily expressed, and purified with high solubility and yield. This library could be a valuable source of antibodies targeting size-restricted epitopes and antigens in obstructed locations where efficient penetration could be critical for successful treatment.     

Lipoarabinomannan of Mycobacterium tuberculosis. Capping with mannosyl residues in some strains.

Previously we had demonstrated that the termini of the arabinan component of mycobacterial cell wall arabinogalactan, the site of mycolic acid location, consists mostly of clusters of a pentaarabinofuranoside, [beta-D-Araf-(1----2)-alpha-D-Araf-(1----]2----(3 and 5)-alpha-D-Araf. Subsequently, the same arrangement was shown to dominate the non-reducing ends of lipoarabinomannan (LAM), a key component in the interaction of mycobacteria with host cell. Accordingly, we had proposed that mycobacteria universally elaborate the same Araf-containing motifs in two settings for different pathophysiological purposes. However, we now report that the termini of LAM from the virulent, Erdman, strain of Mycobacterium tuberculosis, unlike those from the attenuated H37Ra strain, are extensively capped with mannosyl (Manp) residues, either a single alpha-D-Manp, a dimannoside (alpha-D-Manp-(1----2)-alpha-D-Manp), or a trimannoside (alpha-D-Manp-(1----2)-alpha-D-Manp-(1----2)-alpha-D-Manp ). The use of monoclonal antibodies demonstrates a clear difference in the antigenicity of the basic and mannose-capped LAM. The possibility that these structures are a factor in the virulence of some strains of M. tuberculosis and represent an example of carbohydrate mimicry in mycobacterial infections is discussed.