Controlling light absorption and photoelectric properties of coumarin-triphenylaminedye by different acceptor functional groups

The ground state and excited state properties of three coumarin dyes, ZCJ1, ZCJ2 and ZCJ3, including ground state structures, energy levels, absorption spectra and driving forces of electron injection, were investigated via density functional theory (DFT) and time-dependent density functional theory (TD-DFT). In addition, five new molecules ZCJ3-1, ZCJ3-2, ZCJ3-3, ZCJ3-4 and ZCJ3-5 were designed through the introduction of a –CN group into molecule ZCJ3. The ground state and excited state properties of the five designed molecules were also calculated and compared with that of the original molecule, aiming to investigate the effect of different position of –CN groups on the optical and electrical properties of dye molecules. Moreover, the external electric field was taken into account. The results indicated that all three original molecules have better absorption within the visible-light range, and the molecule with a thiophene–thiophene conjugated bridge enables a red shift of the absorption spectrum. The molecule with a thiophene–benzene ring conjugated bridge enables the increase of driving force of electron injection. The energy levels, spectra and driving force of electron injection for the designed molecules are discussed in terms of studying their potential utility in dye-sensitized solar cells.     

Photophysical study of photoinduced electron transfer in a bis-thiophene substituted peryleneimide.

Based on femtosecond time-resolved spectroscopy and single photon timing experiments, intramolecular photoinduced charge transfer has been investigated in two systems containing a peryleneimide chromophore (P) and thiophene (T) groups. The first compound bearing a single thiophene ring (PT1) is used as model and shows a behavior similar to P, studied previously, while in the compound with two thiophene rings attached (PT2) electron transfer from the thiophene donor to the peryleneimide acceptor is observed in benzonitrile. Femtosecond fluorescence upconversion and femtosecond transient absorption experiments in benzonitrile indicate that this ion-pair state formation occurs in 19 ps. This ion-pair state then decays with two time constants of 1400 and 820 ps, probably corresponding to different conformations of the thiophene rings.     

DFT study of linear and nonlinear optical properties of donor-acceptor substituted stilbenes, azobenzenes and benzilideneanilines

A theoretical analysis of the linear and nonlinear optical properties of six push–pull π-conjugated molecules with stilbene, azobenzene and benzilideneaniline as a backbone is presented. The photophysical properties of the investigated systems were determined by using response functions combined with density functional theory (DFT). Several different exchange-correlation potentials were applied in order to determine parameters describing the one- and two-photon spectra of the studied molecules. In particular, the recently proposed Coulomb-attenuated model (CAM-B3LYP) was used to describe charge-transfer (CT) excited states. In order to compare theoretical predictions with available experimental data, calculations with inclusion of solvent effects were performed. The BLYP and the CAM-B3LYP functionals were found to yield values of two-photon absorption (TPA) probabilities closer to experimental values than the B3LYP functional or the HF wavefunction. Moreover, molecular static hyperpolarisabilities were determined using both DFT and second-order Møller-Plesset perturbation (MP2) theory. Likewise, the CAM-B3LYP functional was found to outperform other applied exchange-correlation potentials in determining first hyperpolarisability (β). Moreover, it was confirmed on a purely theoretical basis that the presence of a –C=C– bridge between the phenyl rings leads to a much larger nonlinear optical response in comparison with a –N=N– bridge.     

The symmetric and asymmetric thiophene-fused benzocarborane: structures and first hyperpolarizabilities

The unusual properties of thiophene-fused benzocarborane have attracted a lot of interest in recent years due to their wide applications in photonics and optoelectronics. In the present work, nine molecules [M, N] (M, N are labeled as the number of thiophene rings on the left and right part, respectively) on the basis of thiophene-fused benzocarborane were considered. The first hyperpolarizability (β _tot) values of three synthesized symmetric molecules [1, 1], [2, 2], [3, 3] (M=N, Chem. Eur. J 2012. 18, 11251–11257) and six asymmetric molecules [1, 2], [1, 3], [1, 4], [1, 5], [2, 3], [2, 4] (M≠N) were investigated, β _tot values of symmetric molecules show the order: 39 of [1, 1]< 800 of [2, 2]< 903 au of [3, 3], which indicate that β _tot value increases with increasing the number of thiophene ring for symmetric molecules. The other order of β _tot values can be observed: 39 of [1, 1]< 800 of [1, 2]< 3553 of [1, 3]< 7998 of [1, 4]< 13049 au of [1, 5] and 66 of [2, 2]< 3240 of [2, 3]< 8029 au of [2, 4]. Interestingly, when sum of M and N is constant, larger difference between M and N is, larger β _tot value is: 800 au of [2, 2]< 3553 au of [1, 3]; 3240 au of [2, 3] < 7998 au of [1, 4]; 903 au of [3, 3]< 8029 au of [2, 4]< 13049 au of [1, 5]. Significantly, [1, 5] with six thiophene rings has the largest β _tot value (13049 au) which is greatly larger than 903 au of [3, 3] with six thiophene rings. Furthermore, the natural bond orbital (NBO) charge populations, the nucleus-independent chemical shift (NICS), the bond length alternation (BLA) of the nine molecules and crucial transition were studied in our work. We hope that the present work will be beneficial for future theoretical and experimental studies on the electro-optical properties of thiophene-fused benzocarborane molecules.

TD-DFT investigation of D–π–A organic dyes with thiophene moieties as π-spacers for use as sensitizers in DSSCs

The geometrical, conformational, and electronic properties of a series of D–π–A metal-free dyes designed for use as sensitizers in DSSCs were studied using DFT and TD-DFT methods. A substituted triphenylamine moiety was used as the donor group and 2-cyanoacrylic acid as the acceptor group in these dyes. They also contained conjugated bridging π-linker groups containing two or more thiophene rings to enhance the intramolecular charge transfer. The B3LYP, M06-HF, ωB97XD and CAM-B3LYP functionals were utilized in combination with the 6-31G(d,p) basis set for the calculations. The dye solvation process was taken into account via the polarizable continuum model. To rationalize the relationships between dye structure and the photochemical properties of the dyes when used as sensitizers in DSSCs, the vertical excitation energies, the light-harvesting efficiencies, the free-energy changes during the process of injecting an electron into the surface of a TiO₂ nanocrystalline semiconductor, and the open-circuit potentials were calculated for all of the dyes in the solvent THF using the above methods. The results of these computations are discussed and compared with the available corresponding experimental data.     

Theoretical investigation of auxiliary electronic acceptors in modifying D-D-π-A sensitizers for dye-sensitized solar cells

In light of the performance of the SD2 pigments in DSSC, in order to expand the absorption spectral scope, decrease the energy difference between the highest occupied and the lowest unoccupied molecular orbitals, with SD2 dye molecular electron donor and electron acceptor as the fundamental framework, the indole fragment and thiophene derivative in the prototype dye molecule were replaced by the two π-bridges (labeled PA, PB, respectively) and the four auxiliary electron acceptors (labeled A1, A2, A3, A4, respectively). For the sake of characterizing dye molecules as thoroughly as possible in DSSC, the frontier orbital energy levels, ultraviolet absorption spectra, natural bond orbital analysis, intramolecular charge transfer, charge and hole reorganization energies, parameters influencing the short-circuit current density and the open-circuit photovoltage for these eight individual dye molecules are carried out to try to fully characterize the properties of these dye molecules. According to these computational results of physical quantities and based on the performance of these dye molecules in the above aspects, in this paper, six free molecular models were picked out to combine with titanium dioxide cluster to calculate their geometrical structures, frontier orbital distributions, electron excitation energies, ultraviolet absorption spectra and the composition of the electronic transitions in chloroform solvent with polarizable continuum model. The results of these calculations show that the PA-A2 and PB-A4 dye molecule has better properties in electron transfer and spectral absorption range before and after the adsorption on the titanium dioxide.     

Dichroism and polarized fluorescence of chlorophyll a, chlorophyll c and bacteriochlorophyll a dissolved in liquid crystals

Three photosynthetic pigments were studied: chlorophyll a, chlorophyll c and bacteriochlorcphyll a in nematic liquid crystal matrixes. The polarized absorption and fluorescence spectra as a function of the electric field have been measured. From the polarized components of the absorption A( parallel) and A( perpendicular) of the pigments in liquid crystals two reduced components A(x) and A(y) are calculated (x and y are the direction of the axis which is going through the second, fourth pyrrol rings, and the first, third rings, respectively). From these results the orientation of chlorophylls in liquid crystals and the configuration of the transition moments in the skeleton of the pigment molecules were determined.     

Structure-function relationships in the phototoxicity of acetylenes from the Asteraceae

Structure-function relationships of a series of polyacetylenes and thiophene derivatives from the plant family Asteraceae were examined in relation to their photosensitizing activity to E. coli and S. cerevisiae cultures. The thiophenes were generally found to be more phototoxic than the polyacetylenes, with increasing activity with increasing number of thiophene rings. With the polyacetylenes there was a general trend of increasing toxicity with increasing acetylene bonds in the molecule. An assessment of the relative phototoxicities of the test compounds revealed a positive correlation between phototoxicity and water-octanol partition coefficients with yeast and to a lesser extent with E. coli. Thiophenes were found to have a higher relative light absorption than acetylenes, but considering all the compounds together there was little correlation between phototoxicity and photon absorption. These results are discussed in relation to modes of action and ecological significance of these phototoxic protective agents.     

Electronic structure study using density functional theory in organic dendrimers

The electronic and structural properties of pyrrolic ring derivatives were studied using density functional theory (DFT) in terms of their application as organic semiconductor materials in photovoltaic devices. The B3LYP hybrid functional in combination with Pople type 6-31G(d) basis set with a polarization function was used in order to determine the optimized geometries and the electronic properties of the ground state, while transition energies and excited state properties were obtained from time-dependent (TD)-DFT with B3LYP/6-31G(d) calculation. The investigation of pyrrolic derivatives formed by the arrangement of several monomeric units revealed that three-dimensional (3D) conjugated architectures in which the combination of a triphenylamine (TPA) core with π-conjugated rings attached to the core, present the best geometric and electronic characteristics for use as an organic semiconductor material. The highest occupied molecular orbital (HOMO) − lowest unoccupied molecular orbital (LUMO) energy gap was decreased in 3D-structures that extend the absorption spectrum toward longer wavelengths, revealing a feasible intramolecular charge transfer process in these systems. All calculations in this work were performed using the Gaussian 03 W software package.     

A study of the aromaticity of heteroannelated cyclooctatetraene derivatives

The aromaticity of the rings of thiophene, pyrrole, furan, and benzene annelated cyclooctatetraene (COT) derivatives and of their double charged ions was studied using the graph-theoretical theory of aromaticity. On the basis of topological resonance energy, it was found that the global aromaticity is dependent upon on the arrangement of heteroatoms in the given molecule. Relative stability of these molecules when in different charged states can been explained in terms of the topological charge stabilization rule. We expect that fusing the COT ring with an increasing number of aromatic rings will lead to an increase in the aromaticity of the molecule. According to the bond resonance energy (BRE) and circuit resonance energy (CRE) indices, local antiaromaticity of the COT ring is weakened as the number of fused rings increases, and these changes play a significant role in the global aromaticity of the molecule. For some compounds, our BRE and CRE indices do not predict the same order of magnitude of the local aromatic character of certain rings that the nucleus independent chemical shift (NICS(0) and (NICS(1)) methods predict. Finally, for the available compounds, correlations between the diatropic and paratropic chemical shifts of the protons and our ring current results were analyzed and good agreement was found.     

Structural and electronic properties of 4H-cyclopenta[2,1-b,3;4-b′]dithiophene S-oxide (BTO) derivatives with an S, S=O, O, SiH2, or BH2 bridge: semi-empirical and DFT study

In this paper, we theoretically studied the geometries, stabilities, and the electronic and thermodynamic properties of 4H-cyclopenta[2,1-b,3;4-b']dithiopene S-oxide derivatives (BTO-X, with X = BH(2), SiH(2), S, S=O, or O) using semi-empirical methods, ab initio methods, and density functional theory. The geometries and thermodynamic parameters calculated by PM3 were in good agreement with those calculated with B3LYP/6-31 G*. The band gap calculated using B3LYP/6-31 G* ranged from 3.94 eV (BTO-O) to 3.16 eV (BTO-B). The absorption λ(max) calculated using B3LYP/6-31 G* was shifted to longer wavelengths when X = BH(2), SiH(2), or S=O (due to their electron-withdrawing effects) and to shorter wavelengths for BTO-S and BTO-O as compared to the λ(max) for the thiophene S-oxide (2TO) dimer. The changes in ΔH°, ΔS°, and ΔG° calculated using both semi-empirical and DFT methods were quite similar.     

Donor-substituted phenyl-pi-chromones: electrochemiluminescence and intriguing electronic properties.

Phenylethynylchromones bearing different donor groups at the phenyl moiety have been prepared and their photophysical and electrogenerated chemiluminescence (ECL) properties have been studied with respect to their structural features. Intriguingly, the presence and variation of donor groups do not much influence the absorption spectra, which can be compared with the spectrum of unsubstituted chromone, whereas the photoluminescence (PL) spectra show pronounced changes. Density functional theory (DFT) calculations indicate enhancement of HOMO energy levels upon increasing the donor strength. The photophysical properties have also been studied in various solvents, and the PL spectra in particular show the anticipated trend. The introduction of pi-extension imparts ECL to the new molecules and the electronic coupling between the donor and the acceptor moieties through C-C triple bond influences ECL emission maxima. Weaker donors impart excimer ECL while stronger donors impart monomeric intramolecular charge transfer (ICT) ECL.     

Inhibition of bacterial growth and galactosyltransferase activity of WbwC by α, ω-bis(3-alkyl-1H-imidazolium)alkane salts: Effect of varying carbon content

A series of compounds was designed and synthesized having two imidazolium rings separated by a polymethylene spacer and having alkyl substituents on each of the imidazolium rings. The compounds were assayed for their effects on the activity of galactosyltransferase WbwC, and also on the growth of Gram-negative and Gram-positive bacteria, as well as human cells. The inhibition observed on enzyme activities and cell growth was dependent on the total number of carbons in the spacer and the alkyl substituents on the imidazolium rings. These readily synthesized, achiral compounds have potential as antimicrobial and antiseptic agents.     

Design syntheses and mitochondrial complex I inhibitory activity of novel acetogenin mimics.

Some natural acetogenins are the most potent inhibitors of mitochondrial complex I. These compounds are characterized by two functional units [i.e. hydroxylated tetrahydrofuran (THF) and alpha, beta-unsaturated gamma-lactone ring moieties] separated by a long alkyl spacer. To elucidate which structural factors of acetogenins, including their active conformation, are crucial for the potent inhibitory activity we synthesized a novel bis-acetogenin and its analogues possessing two gamma-lactone rings connected to bis-THF rings by flexible alkyl spacers. The inhibitory potency of the bis-acetogenin with bovine heart mitochondrial complex I was identical to that of bullatacin, one of the most potent natural acetogenins. This result indicated that one molecule of the bis-acetogenin does not work as two reactive inhibitors, suggesting that a gamma-lactone and the THF ring moieties act in a cooperative manner on the enzyme. In support of this, either of the two ring moieties synthesized individually showed no or very weak inhibitory effects. Moreover, combined use of the two ring moieties at various molar ratios exhibited no synergistic enhancement of the inhibitory potency. These observations indicate that both functional units work efficiently only when they are directly linked by a flexible alkyl spacer. Therefore, some specific conformation of the spacer must be important for optimal positioning of the two units in the enzyme. Furthermore, the alpha,beta-unsaturated gamma-lactone, the 4-OH group in the spacer region, the long alkyl tail attached to the THF unit and the stereochemistry surrounding the hydroxylated bis-THF rings were not crucial for the activity, although these are the most common structural features of natural acetogenins. The present study provided useful guiding principles not only for simplification of complicated acetogenin structure, but also for further wide structural modifications of these molecules.     

Donor functionalized quinoline based organic sensitizers for dye sensitized solar cell (DSSC) applications: DFT and TD-DFT investigations

The influence of different donor groups in quinoline based novel sensitizers for dye sensitized solar cell (DSSC) applications is analyzed by using density functional theory (DFT) and time dependent density functional theory (TD-DFT). Quinoline and donor functionalized quinoline based novel organic sensitizers have been designed with different π-spacers for DSSC applications. The ground state molecular structure of novel organic sensitizers is fully optimized by DFT calculation in both gas and chloroform phases. Electronic absorption characteristics are predicted by the TD-DFT calculation in both gas and chloroform phases. The polarizable continuum model is used for solvent phase optimization. The net electron transfer from the donor to acceptor is calculated from natural bond orbital (NBO) analysis. The injection energy and dye regeneration energy values are also calculated. Different donor groups are substituted in quinoline, and these substituted quinoline donors are used as the donor group. Cyanovinyl and thiophene groups act as π-spacers and cyanoacrylic acid acts as an acceptor. DFT and TD-DFT studies of the quinoline and donor functionalized quinoline sensitizers show that the coumarin based and N-hexyltetrahydroquinoline donors are more efficient for DSSC application.     

Molecular modeling of two-photon absorption and third-order nonlinearities of polymethine dyes for all-optical switching

Stimulated by a recent experimental report [Hales JM et al. (2010) Science 327:1485-1488], two-photon absorption and third-order optical nonlinearities of selenopyrylium- and bis(dioxaborine)-terminated polymethine dyes (called SE-7C and DOB-9C) used for all-optical switching were investigated theoretically with time-dependent DFT (TD-DFT) and response theory as well as visualized real-space analysis. The calculated results for the first hyperpolarizability and second hyperpolarizability demonstrated that the two molecules both have large third-order optical nonlinearities. Using real-space analysis, we were able to visually determine that in the one-photon absorption (OPA) process, the first singlet excited state of SE-7C and DOB-9C is an intramolecular charge transfer (ICT) excited state with strong absorption, while the second excited state of these dyes (also termed the "ICT state") shows weak absorption. However, in the two-photon absorption (TPA) process, a larger TPA absorption cross-section was predicted for the second excited state. In this paper, we describe the properties of the S2 excited state, incorporating charge transfer and the transition moment, via real-space analysis, which was very important for understanding the TPA characteristics of the S(2) state.     

DFT calculations on nitrodiborane compounds as new potential high energy materials

We have used DFT methods to determine the structures and thermochemistry of several nitro-substituted diborane molecules in an attempt to rate their potential as high energy materials. The properties of nitrodiborane, three isomers of dinitrodiborane, trinitrodiborane, and tetranitrodiborane were calculated using the B3LYP density functional method. Our results indicate that the absolute enthalpy of combustion decreases with increasing nitro content, in contrast with other nitro-substituted systems that have been studied previously.     

Benzo[b]thiophene-based histone deacetylase inhibitors

Benzo[b]thienyl hydroxamic acids, a novel class of histone deacetylase (HDAC) inhibitors, were identified via a targeted screen of small molecule hydroxamic acids. Various substitutions were explored in the C5- and C6-positions of the benzo[b]thiophene core to characterize SAR and develop optimal inhibitors. It was determined that substitution at the C6-position of the benzo[b]thiophene core with a three-atom spacer yielded optimal HDAC1 inhibition and anti-proliferative activity in murine erythroleukemia (SC-9) cells.     

The photochemistry of thiophene S-oxides.

Thiophene S-oxides have been prepared and their photoreactivity has been studied. In many cases, the sulfur moiety of the thiophene S-oxides is deoxygenated. Here, the corresponding thiophenes or hydroxylated thiophenes are isolated. In the case of the photoirradiation of tert-butyl substituted thiophene S-oxides, the oxygen of the sulfoxy unit is incorporated into the heterocyclic ring system and the corresponding furans have been isolated. Also, structures with two thiophene cores have been oxidized to the respective thiophene S-oxides. These molecules undergo photodeoxygenation, a reaction, which is catalysed by (non-oxidized) thiophenes.