Characterization and purification of acidocin CH5, a bacteriocin produced by Lactobacillus acidophilus CH5

AIMS: To characterize and to purify a bacteriocin produced by Lactobacillus acidophilus strain with its activity restricted to Gram-positive bacteria. METHODS AND RESULTS: Native acidocin CH5, a bacteriocin produced by L. acidophilus CH5 an isolate from a dairy starter culture forms in MRS (Oxoid, Basingstoke, UK) broth high-molecular weight aggregates which can dissociate into smaller units (retained by 5 kDa membrane) with higher activity. Acidocin CH5 was purified using combinations of chromatographic methods based on hydrophobic and cation exchange principles and the N-terminal region was sequenced. CONCLUSIONS: Based on our results it is evident that acidocin CH5 belongs, according to bacteriocin classification, to the class II bacteriocins with identical N-terminal amino acid sequence described in the literature previously. SIGNIFICANCE AND IMPACT OF THE STUDY: The study has provided further data on bacteriocin acidocin CH5 from class II with wide spectrum of antimicrobial activity atypical for bacteriocins produced by L. acidophilus sharing the same homology.     

Mode of action of acidocin 8912, a bacteriocin produced by Lactobacillus acidophilus TK8912

K.A. HOEKSTRA AND R.J.L. PAULTON. 1996. Disc agar diffusion testing was performed on 547 isolates (two common pathogens) to determine if the site of isolation influenced the antimicrobial susceptibility results for a given bacterium. The most statistically significant results ( P < 0.05) included cephalothin (ear) against Staphylococcus aureus and cephalothin (ear), lincomycin (ear), trimethoprim sulpha (ear), and amoxycilin and clavulanic acid (nose) against Staph. intermedius. Although the impact of these results (empirical treatment) is unknown, it is hypothesized that the site of isolation of Staph. aureus and Staph. intermedius may influence the choice of antimicrobial therapy in the dog and cat.     

Purification and characterisation of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079

Bacteriocins are natural antimicrobial agents produced by food fermentative bacteria. Lactobacillus acidophilus DSM 20079 produces a small bacteriocin, with a molecular mass of 6.6 kDa, designated acidocin D20079. This antimicrobial peptide was extremely heat-stable (30 min at 121 degrees C) and was active over a wide pH range. It was found to be sensitive to proteolytic enzymes (trypsin, ficin, pepsin, papain, and proteinase K). Acidocin D20079 has a narrow inhibitory spectrum restricted to the genus Lactobacillus which includes L. sakei NCDO 2714, an organism known to cause anaerobic spoilage of vacuum-packaged meat. Maximum production of acidocin D20079 in MRS broth was detected at pH 6.0, and the peptide was purified by ammonium sulphate precipitation followed by sequential cation exchange and hydrophobic interaction chromatography. Purified acidocin D20079 spontaneously formed spherulite crystals during dialysis. As the N-terminus was found to be blocked for sequencing, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry was used to determine a partial sequence, and the molecular mass of the bacteriocin in the formed crystals (6.6 kDa). Estimates of the molecular weight of the partially purified peptide, using tricine-SDS-PAGE, in which bacteriocin activity was confirmed by overlayer techniques were in accordance with this value.     

Production and physicochemical characterization of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079

Lactobacillus acidophilus DSM 20079 is the producer of a novel bacteriocin termed acidocin D20079. In this paper, a partial sequence of this peptide is determined, together with data on its secondary structure. A modification of the MRS-growth medium (replacing the detergent Tween 80 with oleic acid), was shown to improve the production level of the peptide by one order of magnitude, as well as to stabilize the activity level. Addition of a detergent (Tween 20, less interfering in mass spectrometric analysis), was however necessary for solubilization of the purified acidocin D20079. Digestion of the peptide followed by de-novo sequencing of generated fragments, allowed determination of a partial sequence consisting of 39 of the totally estimated 65 residues. Acidocin D20079 has a high content of glycine residues, hydrophobic residues, and acidic residues. No modified amino acids were found. Edman degradation, and C-terminal sequencing failed, suggesting that the peptide may be cyclic, and a novel member of class IIc bacteriocins. Circular dichroism spectroscopy and secondary structure prediction showed random coil conformation in aqueous solution, but secondary structure was induced in the presence of sodium-dodecyl sulfate. The data could be fitted assuming 2–13% of the residues to be in α-helix and 23–27% of the residues to be in β-strand conformation. This indicates that a membrane/membrane-mimicking hydrocarbon–water interface induces an active conformation.     

Purification and some properties of acidocin 8912, a novel bacteriocin produced by Lactobacillus acidophilus TK8912.

Acidocin 8912, a bacteriocin produced by Lactobacillus acidophilus TK8912, was purified by ammonium sulfate fractionation and successive chromatographies on CM-cellulose, Sephadex G-50, Sephadex G-25, and reversed-phase HPLC on Aquapore RP-300. The purified acidocin 8912 migrated as a single band on SDS-PAGE. The molecular weight was estimated to be 5200 by SDS-PAGE, and 5400 by HPLC gel filtration on TSKgel G3000PWXL. Both the amino acid composition and the N-terminal amino acid sequence analysis indicated that acidocin 8912 was a peptide composed of presumably 50 amino acids containing a Lys residue at the N-terminus. The purified acidocin 8912 showed a bactericidal effect on sensitive cells but not a bacteriolytic effect.     

Detection and activity of lactacin B, a bacteriocin produced by Lactobacillus acidophilus

A total of 52 strains of Lactobacillus acidophilus were examined for production of bacteriocins. A majority (63%) demonstrated inhibitory activity against all members of a four-species grouping of Lactobacillus leichmannii, Lactobacillus bulgaricus, Lactobacillus helveticus, and Lactobacillus lactis. Four L. acidophilus strains with this activity also inhibited Streptococcus faecalis and Lactobacillus fermentum, suggesting a second system of antagonism. Under conditions eliminating the effects of organic acids and hydrogen peroxide, no inhibition of other gram-positive or -negative genera was demonstrated by L. acidophilus. The agent produced by L. acidophilus N2 and responsible for inhibition of L. leichmannii, L. bulgaricus, L. helveticus, and L. lactis was investigated. Ultrafiltration studies indicated a molecular weight of approximately 100,000 for the crude inhibitor. The agent was sensitive to proteolytic enzymes and retained full activity after 60 min at 100 degrees C (pH 5). Activity against sensitive cells was bactericidal but not bacteriolytic. These characteristics identified the inhibitory agent as a bacteriocin, designated lactacin B. Examination of strains of L. acidophilus within the six homology groupings of Johnson et al. (Int. J. Syst. Bacteriol. 30:53-68, 1980) demonstrated that production of the bacteriocin lactacin B could not be used in classification of neotype L. acidophilus strains. However, the usefulness of employing sensitivity to lactacin B in classification of dairy lactobacilli is suggested.     

Isolation, partial characterization and mode of action of acidocin J1229, a bacteriocin produced by Lactobacillus acidophilus JCM 1229

Lactobacillus acidophilus JCM 1229 produces a heat-stable bacteriocin, designated as acidocin J1229, that has a narrow inhibitory spectrum. Production of acidocin J1229 in MRS broth was pH dependent, with maximum activity detected in broth culture maintained at pH 5:0. Acidocin J1229 was purified by ammonium sulphate precipitation and sequential cation exchange and reversed-phase chromatographies. The sequence of the first 24 amino acid residues of the N terminus of acidocin J1229 was determined. The molecular mass of acidocin J1229 as determined by mass spectrometry was 6301 Da. Acidocin J1229 showed a bactericidal effect but not a bacteriolytic effect on sensitive cells. Acidocin J1229 dissipated the membrane potential and the pH gradient in sensitive cells, which affected such proton motive force-dependent processes as amino acid transport. Acidocin J1229 also caused an efflux of glutamate, previously taken up via a unidirectional ATP-driven transport system. Secondary structure prediction revealed the presence of an amphiphilic a-helix region that could form hydrophilic pores. These results suggest that acidocin J1229 is a pore-forming peptide that creates cell membrane channels through the 'barrel-stave'mechanism.     

Antimicrobial activity of lactobacilli: preliminary characterization and optimization of production of acidocin B, a novel bacteriocin produced by Lactobacillus acidophilus M46

Approximately 1000 lactobacillus strains were isolated and screened for the production of antimicrobial activity, using a target panel of spoilage organisms and pathogens. Only eight positive strains were found; two of these were studied in more detail. Lactobacillus salivarius M7 produces the new broad spectrum bacteriocin salivaricin B which inhibits the growth of Listeria monocytogenes, Bacillus cereus, Brochothrix thermosphacta, Enterococcus faecalis and many lactobacilli. A new atypical bacteriocin produced by Lact. acidophilus M46, acidocin B, combines the inhibition of Clostridium sporogenes with a very narrow activity spectrum within the genus Lactobacillus and was selected for further characterization. Acidocin B is sensitive to trypsin, heat-stable (80°C for 20 min) and can be extracted from the culture supernatant fluid with butanol. Native acidocin B occurs as a large molecular weight complex (100 kDa), while with SDS-PAGE the partly purified activity migrates as a peptide of 2·4 kDa. Optimization of the cultivation conditions resulted in an eightfold increase of the amount of acidocin B produced during growth. Growth is not necessary for acidocin B production; washed producer cells can synthesize the bacteriocin in a chemically defined production medium. The application potential of acidocin B is discussed.     

Partial purification and characterization of the bacteriocin produced by Lactobacillus acidophilus YIT 0154

One strain of Lactobacillus acidophilus was found to produce a bacteriocin-like substance in the culture filtrate. The substance was produced in a growth-associated manner, showed heat stability at neutral and acidic pH and exhibited antibacterial activity against various species of Lactobacillus including L. acidophilus itself. The molecular weight of the substance was in the range of 6.2-95 kDa. N-terminal amino acid sequence analysis suggests that the substance may belong to class IIb bacteriocin.     

Purification and characterization of a bacteriocin produced by Lactobacillus acidophilus IBB 801

Lactobacillus acidophilus IBB 801 produces a small bacteriocin, designated acidophilin 801, with an estimated molecular mass of less than 6.5 kDa. It displays a narrow inhibitory spectrum (only related lactobacilli but including the Gram-negative pathogenic bacteria Escherichia coli Row and Salmonella panama 1467) with a bactericidal activity. The antimicrobial activity of cell-free culture supernatant fluid was insensitive to catalase but sensitive to proteolytic enzymes such as trypsin, proteinase K and pronase, heat-stable (30 min at 121 degrees C), and maintained in a wide pH range. The proteinaceous compound was isolated from cell-free culture supernatant fluid and purified. Crude bacteriocin was isolated as a floating pellicle after ammonium sulphate precipitation (40% saturation) and partially purified by extraction/precipitation with chloroform/methanol (2/1, v/v). Further purification to homogeneity was performed by reversed phase Fast Performance Liquid Chromatography. The amino acid composition was determined. Amino acid sequencing revealed that the N-terminal end was blocked.     

Acidophilucin A, a new heat-labile bacteriocin produced by Lactobacillus acidophilus LAPT 1060

Lactobacillus acidophilus LAPT 1060, isolated from infant faeces, produced an antimicrobial agent active against six strains of Lactobacillus delbrueckii subsp. bulgaricus and six strains of Lactobacillus helveticus . The agent was sensitive to proteolytic enzymes and heat (10 min at 60°C) and is a bacteriocin and designated acidophilucin A.     

Cloning and nucleotide sequence of the gene for acidocin 8912, a bacteriocin from Lactobacillus acidophilus TK8912

K. KANATANI, T. TAHARA, M. OSHIMURA, K. SANO AND C. UMEZAWA. 1995. Acidocin 8912 is a bacteriocin produced by Lactobacillus acidophilus TK8912. The acidocin 8912 structural gene, acdT , was cloned and determined. It was located on the 14–kb plasmid pLA103 and encoded a 46 amino acid precursor including a 20 amino acid N-terminal extension. The precursor sequence of the acdT gene shows a conservation of the general structural characteristics of the bacteriocin precursors from some lactic acid bacteria.     

Production kinetics of acidophilin 801, a bacteriocin produced by Lactobacillus acidophilus IBB 801

Lactobacillus acidophilus IBB 801 produces a small bacteriocin, designated acidophilin 801. Studying the relationship between growth and bacteriocin biosynthesis revealed primary metabolite kinetics of bacteriocin production with a peak activity at the end of the exponential growth phase followed by a decrease during the stationary phase. Both microbial growth and bacteriocin production was inhibited by lactic acid. Whereas volumetric bacteriocin production (activity units (AU) ml(-1)) was favoured under pH-controlled conditions, bacteriocin titres rapidly decreased because of strong adsorption of the bacteriocin molecules to the producing cells under less acidic conditions.     

Purification and partial characterization of lactacin F, a bacteriocin produced by Lactobacillus acidophilus 11088

Lactacin F, a bacteriocin produced by Lactobacillus acidophilus 11088 (NCK88), was purified and characterized. Lactacin F is heat stable, proteinaceous, and inhibitory to other lactobacilli as well as Enterococcus faecalis. The bacteriocin was isolated as a floating pellet from culture supernatants brought to 35 to 40% saturation with ammonium sulfate. Native lactacin F was sized at approximately 180 kDa by gel filtration. Column fractions having lactacin F activity were examined by electron microscopy and contained micelle-like globular particles. Purification by ammonium sulfate precipitation, gel filtration, and high-performance liquid chromatography resulted in a 474-fold increase in specific activity of lactacin F. The purified bacteriocin was identified as a 2.5-kDa peptide by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The lactacin F peptide retained activity after extraction from SDS-PAGE gel slices, confirming the identity of the 2.5-kDa peptide. Variants of NCK88 that failed to exhibit lactacin F activity did not produce the 2.5-kDa band. Sequence analysis of purified lactacin F identified 25 N-terminal amino acids containing an arginine residue at the N terminus. Composition analysis indicates that lactacin F may contain as many as 56 amino acid residues.     

Characterization and partial purification of plantaricin LC74, a bacteriocin produced by Lactobacillus plantarum LC74

Summary Plantaricin LC74, a bacteriocin produced during the growth of Lactobacillus plantarum LC74 isolated from crude goat's milk, inhibited some other mesophilic lactobacilli. It was sensitive to high temperature (95°C) but was relatively stable at 30°C in acidic conditions, and also in the presence of various organic solvents, several detergents, urea or -mercaptoethanol. It was destroyed by proteases. By ultrafiltration plantaricin LC74 showed an apparent molecular mass smaller than 5 kDa. Plantaricin LC74 bounded non specifically to both sensitive and resistant Gram-positive bacteria and displayed a bacteriostatic effect. Its partial purification was obtained by ammonium sulphate precipitation followed by cationic exchange chromatography and hydrophobic interaction chromatography.     

Isolation and characterization of acidocin A and cloning of the bacteriocin gene from Lactobacillus acidophilus.

Acidocin A, a bacteriocin produced by Lactobacillus acidophilus TK9201, is active against closely related lactic acid bacteria and food-borne pathogens including Listeria monocytogenes. The bacteriocin was purified to homogeneity by ammonium sulfate precipitation and sequential ion-exchange and reversed-phase chromatographies. The molecular mass was determined by high-performance liquid chromatography gel filtration to be 6,500 Da. The sequence of the first 16 amino acids of the N terminus was determined, and oligonucleotide probes based on this sequence were constructed to detect the acidocin A structural gene acdA. The probes hybridized to the 4.5-kb EcoRI fragment of a 45-kb plasmid, pLA9201, present in L. acidophilus TK9201, and the hybridizing region was further localized to the 0.9-kb KpnI-XbaI fragment. Analysis of the nucleotide sequence of this fragment revealed that acidocin A was synthesized as an 81-amino-acid precursor including a 23-amino-acid N-terminal extension. An additional open reading frame (ORF2) encoding a 55-amino-acid polypeptide was found downstream of and in the same operon as acdA. Transformants containing this ORF2 became resistant to acidocin A, suggesting that ORF2 encodes an immunity function for acidocin A. The 7.2-kb SacI-XbaI fragment containing the upstream region of acdA of pLA9201 was necessary for acidocin A expression in the acidocin A-deficient mutant, L. acidophilus TK9201-1, and other Lactobacillus strains.     

Purification and partial characterization of lactacin F, a bacteriocin produced by Lactobacillus acidophilus 11088.

Lactacin F, a bacteriocin produced by Lactobacillus acidophilus 11088 (NCK88), was purified and characterized. Lactacin F is heat stable, proteinaceous, and inhibitory to other lactobacilli as well as Enterococcus faecalis. The bacteriocin was isolated as a floating pellet from culture supernatants brought to 35 to 40% saturation with ammonium sulfate. Native lactacin F was sized at approximately 180 kDa by gel filtration. Column fractions having lactacin F activity were examined by electron microscopy and contained micelle-like globular particles. Purification by ammonium sulfate precipitation, gel filtration, and high-performance liquid chromatography resulted in a 474-fold increase in specific activity of lactacin F. The purified bacteriocin was identified as a 2.5-kDa peptide by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The lactacin F peptide retained activity after extraction from SDS-PAGE gel slices, confirming the identity of the 2.5-kDa peptide. Variants of NCK88 that failed to exhibit lactacin F activity did not produce the 2.5-kDa band. Sequence analysis of purified lactacin F identified 25 N-terminal amino acids containing an arginine residue at the N terminus. Composition analysis indicates that lactacin F may contain as many as 56 amino acid residues.     

Plantacin B, a bacteriocin produced by Lactobacillus plantarum NCDO 1193

Abstract Strains of Lactobacillus plantarum and Leuconostoc mesenteroides were tested for bacteriocin production against each other and a range of closely related bacteria. L. plantarum 1193 was found to produce an inhibitory substance active against L. plantarum 340 and 1752, L. mesenteroides 8015 and Pediococcus damnosus 1832. This substance is a potential bacteriocin and has been named plantacin B.     

Characterization of plantaricin KW30, a bacteriocin produced by Lactobacillus plantarum

A protease-sensitive antibacterial substance, produced by a strain of Lactobacillus plantarum isolated from fermented corn, was classified as a bacteriocin and designated plantaricin KW30. The bacteriocin was stable to heat, pH and treatment with surfactants, and unaffected by α-amylase, lipase or lysozyme. Plantaricin KW30 exhibited a bactericidal and non-bacteriolytic mode of action against indicator cells, and inhibitory activity was limited to other lactobacilli. Maximum production was in MRS broth, and coincided with the onset of stationary phase under conditions of low pH and high cell numbers. In a complex medium bacteriocin production was enhanced by the presence of sodium acetate and Tween 80. Curing experiments gave derivatives that no longer produced the bacteriocin but retained immunity to it. These Bac derivatives showed the same plasmid pattern as the parent strain suggesting a chromosomal location for the genes for bacteriocin production.