Preparation of highly efficient monolithic silica capillary columns for the separations in weak cation-exchange and HILIC modes

Weak cation-exchange (WCX) and HILIC modes columns were prepared by on-column polymerization of acrylic acid on monolithic silica capillary columns modified with N-(3-triethoxysilylpropyl)methacrylamide anchor groups. The polymer-coated columns could be used for HILIC mode separation of pyridylamino (PA)-sugars and peptides including a tryptic digest of BSA, while for weak cation-exchange mode for the separation of proteins and nucleosides even at high linear velocity. The poly(acrylic acid) coated monolithic silica capillary columns showed greater retention toward PA-sugars than a polyacrylamide coated monolithic silica capillary columns prepared in the same manner. Proteins and nucleosides were separated effectively at pH 6.9 using the same column. The column provided fair permeability after the polymer-coating step. High-speed separation of proteins at u = 4.66 mm/s with high efficiency was shown to be possible, while high-speed separation of nucleosides has achieved within one minute using the column at u = 8.67 mm/s, suggesting that the column will be suitable for the second dimension separation of multidimensional HPLC systems.     

The covalently bonded cellulose tris(3,5-dimethylphenylcarbamate) on a silica monolithic capillary column for enantioseparation in capillary electrochromatography

A chiral capillary monolithic column for capillary electrochromatography (CEC) was prepared by covalent bonding of cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) on the silica monolithic matrix within the confine of a 50-microm i.d. bare fused silica capillary. Several pairs of enantiomers including neutral and basic analytes were baseline resolved on the newly prepared chiral capillary monolithic column in CEC with aqueous mobile phases. Fast enantioseparation was achieved due to the favorable dynamic properties of silica monolith. The covalent bonding of CDMPC as the chiral stationary phase for CEC also enabled the use of THF in mobile phase for enantioseparation of prazquantel by overcoming the incompatibility of THF and the physically coated CDMPC on a column.     

Hydroxymethyl methacrylate-based monolithic columns designed for separation of oligonucleotides in hydrophilic-interaction capillary liquid chromatography

Hydroxymethyl methacrylate-based monolithic columns for separation of oligonucleotides by capillary liquid chromatography (CLC) were prepared. We optimized composition of the polymerization mixture, which contained the monomer mixture consisting of N-(hydroxymethyl) methacrylamide (HMMAA) and ethylene dimethacrylate (EDMA), and the porogenic system composed of propane-1-ol, butane-1,4-diol and alpha, alpha'-azoisobutyronitrile (AIBN) as initiator. Separations of oligonucleotides were performed in HILIC (hydrophilic-interaction) mode using 100 mM triethylamine acetate (TEAA) in acetonitrile and in water as eluents. The influence of steepness of the mobile phase gradient on separation of the oligonucleotides was evaluated as well as the reproducibility of HMMAA monolith preparation.     

Octadecylated silica monolith capillary column with integrated nanoelectrospray ionization emitter for highly efficient proteome analysis

An improved strategy for the preparation of octadecylated silica monolith capillary column with high homogeneity was proposed. Column performance was evaluated by nanoscale HPLC. The design for constructing an integrated nanoelectrospray emitter on the octadecylated silica monolith capillary column was first introduced. In comparison with the separated configuration where the emitter is connected to monolithic capillary column by the aid of a zero dead volume union, the integrated capillary column has the inherent advantage of the minimized extracolumn volume thus providing improved separation quality. The performance of the integrated monolithic capillary column was evaluated by separation of BSA tryptic digest, and peak capacity of 313 with a 30-cm column was obtained. The high separation performance allowed highly confident identification of 662 distinct proteins through assignment of 1933 unique peptides by analysis of tryptic digest of 0.5 mug of Saccharomyces cerevisiae proteins. The higher separation efficiency by a 60-cm monolithic capillary column increased the proteome coverage with identification of 1323 proteins through assignment of 5501 unique peptides over 400-min gradient elution.     

Monolithic capillary columns for liquid chromatography-electrospray ionization mass spectrometry in proteomic and genomic research

Peptides, proteins, single-stranded oligonucleotides, and double-stranded DNA fragments were separated with high resolution in micropellicular, monolithic capillary columns prepared by in situ radical copolymerization of styrene and divinylbenzene. Miniaturized chromatography both in the reversed-phase and the ion-pair reversed-phase mode could be realized in the same capillary column because of the nonpolar character of the poly-(styrene/divinylbenzene) stationary phase. The high chromatographic performance of the monolithic stationary phase facilitated the generation of peak capacities for the biopolymers in the range of 50-140 within 10 min under gradient elution conditions. Employing volatile mobile phase components, separations in the two chromatographic separation modes were on-line hyphenated to electrospray ionization (tandem) mass spectrometry, which yielded intact accurate molecular masses as well as sequence information derived from collision-induced fragmentation. The inaccuracy of mass determination in a quadrupole ion trap mass spectrometer was in the range of 0.01-0.02% for proteins up to a molecular mass of 20000, and 0.02-0.12% for DNA fragments up to a molecular mass of 310000. High-performance liquid chromatography-electrospray ionization mass spectrometry utilizing monolithic capillary columns was applied to the identification of proteins by peptide mass fingerprinting, tandem mass spectrometric sequencing, or intact molecular mass determination, as well as to the accurate sizing of double-stranded DNA fragments ranging in size from 50 to 500 base pairs, and to the detection of sequence variations in DNA fragments amplified by the polymerase chain reaction.     

Hydroxymethyl methacrylate-based monolithic columns designed for separation of oligonucleotides in hydrophilic-interaction capillary liquid chromatography

Hydroxymethyl methacrylate-based monolithic columns for separation of oligonucleotides by capillary liquid chromatography (CLC) were prepared. We optimized composition of the polymerization mixture, which contained the monomer mixture consisting of N-(hydroxymethyl) methacrylamide (HMMAA) and ethylene dimethacrylate (EDMA), and the porogenic system composed of propane-1-ol, butane-1,4-diol and α, α′-azoisobutyronitrile (AIBN) as initiator. Separations of oligonucleotides were performed in HILIC (hydrophilic-interaction) mode using 100 mM triethylamine acetate (TEAA) in acetonitrile and in water as eluents. The influence of steepness of the mobile phase gradient on separation of the oligonucleotides was evaluated as well as the reproducibility of HMMAA monolith preparation.     

A simple and efficient frit preparation method for one‐end tapered‐fused silica‐packed capillary columns in nano‐LC‐ESI MS

A novel frit preparation method for one‐end tapered‐fused silica‐packed capillary columns in nano‐LC‐ESI MS was developed. A hollow‐fused silica capillary column with a tapered tip as nano‐spray emitter was filled with 5 μm C₁₈ beads, and then a sintered frit about 0.25 mm in length was prepared at the tip by butane flame. A stainless steel protection tube with 0.5 mm id was used to control the length of the frit and to protect the packed C₁₈ beads behind the sintered frit during the sintering. C₁₈ sintered frits were evaluated by BSA tryptic digests with nano‐LC‐LTQ. The sintered frits did not produce post‐column band broadening due to very small volume (about 0.2 nL) and did not produce adsorption to sample. The sintered frit columns had good separation reproducibility and separation performance compared with self‐assembled particles frit columns and commercial columns.     

Separation of polyprenol and dolichol by monolithic silica capillary column chromatography

We attempted an analysis of naturally occurring polyprenol and dolichol using a monolithic silica capillary column in HPLC. First, the separation of the polyprenol mixture alone was performed using a 250 x 0.2 mm inner diameter (ID) octadecylsilyl (ODS)-monolithic silica capillary column. The resolution of the separation between octadecaprenol (prenol 18) and nonadecaprenol (prenol 19) exceeded by >or=2-fold the level recorded when using a conventional ODS-silica particle-packed column (250 x 4.6 mm ID) under the same elution conditions. Next, the mixture of the prenol type (polyprenol) and dolichol type (dihydropolyprenol) was subjected to this capillary HPLC system, and the separation of each homolog was successfully achieved. During the analysis of polyprenol fraction derived from Eucommia ulmoides leaves, dolichols were found as a single peak, including all-trans-polyprenol and cis-polyprenol previously identified. This sensitive high-resolution system is very useful for the analysis of compounds that are structurally close to polyprenols and dolichols and that have a low content.     

Applications of monolithic silica capillary columns in proteomics

The use and applicability of silica based capillary monolithic reversed-phase columns in proteomic analysis has been evaluated by liquid chromatography-mass spectrometry (LC-MS). Chromatographic performance of the monolithic capillaries was evaluated with a tryptic digest of cytochrome C showing very good resolution and reproducibility in addition to the known advantages of a low pressure drop over a time period of 6 months. Monoliths were subsequently tested for their suitability to separate proteins and peptides from samples typically encountered in proteomic research such as in-gel digested tryptic peptide mixtures or fractions of proteolytically digested human serum. The monolithic capillaries also proved useful in the analysis of phospholipid species in bronchoalveolar lavage fluid. Compared to particle-filled conventional capillary columns, rapid and highly efficient separation of peptides and proteins was achieved using these bimodal pore size distribution columns, and good quality collision induced dissociation (CID) mass spectra were obtained on an ion trap mass spectrometer. These novel monolithic separation media are thus a promising addition to the methodological toolbox of proteomics research.     

Polystyrene/Divinylbenzene Based Monolithic and Encapsulated Capillary Columns for the Analysis of Nucleic Acids by High‐Performance Liquid Chromatography‐Electrospray Ionisation Mass Spectrometry

Monolithic capillary columns are prepared by copolymerization of styrene and divinylbenzene, encapsulated capillary columns by immobilizing silica particles with different pore sizes inside a 200 μm i.d. fused silica capillary by encapsulation of the derivatized silica sorbent in a poly(styrene/divinylbenzene) (PS/DVB) matrix. Both allow the rapid and highly efficient separation of single‐ and double‐stranded DNA by ion‐pair reversed‐phase high‐performance liquid chromatography (IP‐RP‐HPLC). The high resolving power of monolithic and encapsulated capillary columns can be utilized for mutation screening in polymerase chain reaction (PCR) amplified polymorphic loci by denaturing HPLC (DHPLC). Recognition of mutations is based on the separation of homo‐ and heteroduplex species by IP‐RP‐HPLC under denaturing conditions, resulting in characteristic peak patterns both for homozygous and heterozygous samples. Separations can be readily hyphenated to electrospray ionization‐mass spectrometry.     

HPLC separation of some purine and pyrimidine derivatives on Chromolith Performance Si monolithic column

The chromatographic behavior of some purines and pyrimidines on a monolithic Chromolith Performance Si column under normal-phase high-performance liquid chromatography mode has been studied. Column pressure, column efficiency and selectivity of Chromolith Performance Si column were compared to those of conventional spherical 5 microm silica packed columns Econosphere Silica and Zorbax Rx-SIL. The investigation has shown that application of Chromolith Performance Si column for analysis of polar solutes can reduce the separation time without sacrificing column efficiency and selectivity. Improvement of the monolithic silica column efficiency for polar solutes is observed when ternary mobile phases (mixtures of hexane-isopropanol with ethylene glycol, water or acetonitrile) are applied.     

Polydopamine assisted fabrication of titanium oxide nanoparticles modified column for proteins separation by capillary electrochromatography

Development of a simple method for preparation of stable open tubular (OT) columns for proteins separation by capillary electrochromatography is still challenging. In this work, the titanium oxide (TiO₂) nanoparticles coated OT column was successfully prepared for separation of proteins by capillary electrochromatography. The polydopamine (PDA) film was first formed in the inner surface of a fused-silica capillary by the self-polymerization of dopamine under alkaline conditions. Then the TiO₂ coating was deposited onto the surface of pre-modified capillary with PDA by a liquid phase deposition process. The plentifully active hydroxyl groups in PDA coating can chelate with Ti⁴⁺ to boost the nucleation and growth of TiO₂ film. The as-prepared TiO₂ coated OT column was characterized by scanning electron microscopy and measurement of electroosmotic flow. Furthermore, the influence of liquid phase deposition time on the TiO₂ coating was investigated. The TiO₂ coated OT column was used for successful separation of two variants of β-lactoglobulin and eight glycoisoforms of ovalbumin. The column demonstrated good repeatability and stability. The relative standard deviations of migration times of proteins representing run-to-run, day-to-day, and column-to-column were less than 3.7%. Moreover, the application of the column was verified by successful separation of acidic proteins in egg white.     

HPLC separation of some purine and pyrimidine derivatives on Chromolith Performance Si monolithic column

The chromatographic behavior of some purines and pyrimidines on a monolithic Chromolith Performance Si column under normal-phase high-performance liquid chromatography mode has been studied. Column pressure, column efficiency and selectivity of Chromolith Performance Si column were compared to those of conventional spherical 5 μm silica packed columns Econosphere Silica and Zorbax Rx-SIL. The investigation has shown that application of Chromolith Performance Si column for analysis of polar solutes can reduce the separation time without sacrificing column efficiency and selectivity. Improvement of the monolithic silica column efficiency for polar solutes is observed when ternary mobile phases (mixtures of hexane–isopropanol with ethylene glycol, water or acetonitrile) are applied.     

Peptide separation by Hydrophilic-Interaction Chromatography: a review

Recent developments in the separation of peptides by high-performance liquid chromatography (HPLC) using polar sorbents with less polar eluents are summarized in this review. This separation mode is now commonly referred to as Hydrophilic-Interaction Chromatography (HILIC). The retention mechanism and chromatographic behavior of polar solutes under HILIC conditions are studied on TSKgel Amide-80 columns, which consist of carbamoyl groups bonded to a silica gel matrix, using a mixture of acetonitrile (MeCN)–water containing 0.1% trifluoroacetic acid (TFA). Some applications are given in peptide field using Hydrophilic-Interaction Chromatography.     

An open tubular capillary electrochromatography column with porous inner surface for protein separation

An open tubular capillary electrochromatography (OTCEC) column using sole porogen to form porous inner surface has been developed. The porous layer was coated on the capillary inner wall by in situ polymerization in the presence of porogen. The results show that the columns using 1-propanol as sole porogen are appropriate for protein separation. It has higher separation efficiency than the column with the usual coporogen due to much more micropores and mesopores on the porous surface and a higher specific surface area. In addition, the sensitivity of the prepared OTCEC column was improved greatly compared with the dynamically coated capillary with polyvinylpyrrolidone.     

Analysis of bile acids in serum and bile by capillary gas-liquid chromatography

Various liquid phases for glass capillary columns have been evaluated for gas-liquid chromatographic analysis of methyl ester trimethylsilylether derivatives of bile acids from serum and bile. Bile acid analysis is rapid and exhibits high separation efficiency with a 20 X 0.3 mm glass capillary column whose internal surface is covered with a crystal layer of barium carbonate and coated with polyethyleneglycol 20000 as liquid phase according to Grob et al.     

Monoliths for microfluidic devices in proteomics

We report here on the preparation of monolithic capillary columns in view to their integration in a microsystem for on-chip sample preparation before their on-line analysis by electrospray and mass spectrometry (ESI-MS). These monolithic columns are based on polymer materials and consist of reverse phases for peptide separation and/or desalting. They were prepared using lauryl methacrylate (LMA), ethylene dimethacrylate (EDMA) as well as a suitable porogenic mixture composed of cyclohexanol and ethylene glycol. The resulting stationary phases present thus a C12-functionality. The LMA-based columns were first prepared in a capillary format using capillary tubing of 75 microm i.d. and tested in nanoLC-MS experiments for the separation of a commercial Cytochrome C digest composed of 12 peptidic fragments whose isoelectric point values and hydrophobic character cover a wide range. The LMA-based columns were capable of separating the peptidic fragments and their performances were seen to be similar as those of standard commercial columns dedicated to proteomic purposes with calculated separation efficiencies up to 145 x 10(3) plates/m. Monolithic LMA-based phases were then successfully polymerized in microchannels fabricated using the negative photoresist SU-8. After the polymerization, the systems were seen to withstand the pressures applied during the nanoLC-MS separation tests that were carried out in the same conditions as for the monolithic capillary columns. The pressure drop during these tests of the in-microchannel monoliths was as high as 50 bar; however, the separation was not as good as for a capillary format which could be accounted for by the monolith dimensions.     

Fe3+ immobilized metal affinity chromatography with silica monolithic capillary column for phosphoproteome analysis

Immobilized metal affinity chromatography (IMAC) is a commonly used technique for phosphoproteome analysis due to its high affinity for adsorption of phosphopeptides. Miniaturization of IMAC column is essential for the analysis of a small amount of sample. Nanoscale IMAC column was prepared by chemical modification of silica monolith with iminodiacetic acid (IDA) followed by the immobilization of Fe3+ ion inside the capillary. It was demonstrated that Fe3+-IDA silica monolithic IMAC capillary column could specifically capture the phosphopeptides from tryptic digest of alpha-casein with analysis by MALDI-TOF MS. The silica monolithic IMAC capillary column was manually coupled with nanoflow RPLC/nanospray ESI mass spectrometer (muRPLC-nanoESI MS) for phosphoproteome analysis. The system was validated by analysis of standard phosphoproteins and then it was applied to the analysis of protein phosphorylation in mouse liver lysate. Besides MS/MS spectra, MS/MS/MS spectra were also collected for neutral loss peak. After database search and manual validation with conservative criteria, 29 singly phosphorylated peptides were identified by analyzing a tryptic digest of only 12 mug mouse liver lysate. The results demonstrated that the silica monolithic IMAC capillary column coupled with muRPLC-nanoESI MS was very suitable for the phosphoproteome analysis of minute sample.     

Isolation and quantification of dinucleoside polyphosphates by using monolithic reversed phase chromatography columns

In former studies, dinucleoside polyphosphates were quantified using ion-pair reversed-phase perfusion chromatography columns, which allows a detection limit in the micromolar range. The aim of this study was both to describe a chromatographic assay with an increased efficiency of the dinucleoside separation, which enables the reduction of analytical run times, and to establish a chromatographic assay using conditions, which allow MALDI-mass spectrometric analysis of the resulting fractions. We compared the performance of conventional silica reversed phase chromatography columns, a perfusion chromatography column and a monolithic reversed-phase C18 chromatography column. The effects of different ion-pair reagents, flow-rates and gradients on the separation of synthetic diadenosine polyphosphates as well as of diadenosine polyphosphates isolated from human platelets were analysed. Sensitivity and resolution of the monolithic reversed-phase chromatography column were both higher than that of the perfusion chromatography and the conventional reversed phase chromatography columns. Using a monolithic reversed-phase C18 chromatography column, diadenosine polyphosphates were separable baseline not only in the presence of tetrabutylammonium hydrogensulfate (TBA) but also in the presence of triethylammonium acetate (TEAA) as ion-pair reagent. The later reagent is useful because, in contrast to TBA, it is compatible with MALDI mass-spectrometric methods. This makes TEAA particularly suitable for identification of unknown nucleoside polyphosphates. Furthermore, because of the lower backpressure of monolithic reversed-phase chromatography columns, we were able to significantly increase the flow rate, decreasing the amount of time for the analysis close to 50%, especially using TBA as ion-pair reagent. In summary, monolithic reversed phase C18 columns markedly increase the sensitivity and resolution of dinucleoside polyphosphate analysis in a time-efficient manner compared to reversed-phase perfusion chromatography columns or conventional reversed-phase columns. Therefore, further dinucleoside polyphosphate analytic assays should be based on monolithic silica C18 columns instead of perfusion chromatography or conventional silica reversed phase chromatography columns. In conclusion, the use of monolithic silica C18 columns will lead to isolation and quantification of up to now unknown dinucleoside polyphosphates. These chromatography columns may facilitate further research on the biological roles of dinucleoside polyphosphates.     

Preparation and evaluation of bovine serum albumin immobilized chiral monolithic column for affinity capillary electrochromatography

A system of capillary silica monolith with bovine serum albumin (BSA) functionalized through two approaches for affinity monolithic capillary electrochromatography (AMCEC) was developed. Covalent immobilization conditions for two different Schiff base methods, which employed 3-glycidopropyl trimethoxysilane (GPTS) and 3-aminopropyl trimethoxysilane (APTS) as starting materials, respectively, were investigated to obtain good and stable chiral separation. The BSA immobilized silica monoliths were evaluated in terms of morphology, electroosmotic flow, retention time, column efficiency and resolution of model compound (±)-tryptophan. The columns exhibited satisfactory run-to-run, column-to-column repeatability and maintained their enantioselectivity for more than 3 months. Both developed methods can baseline separate tryptophan enantiomers, whereas shorter retention time, better column efficiency, and enantiomeric recognition between two pairs of drug enantiomers (pantoprazole and atenolol) were obtained by the GPTS method.