Equilibrium, solid state behavior and reactions of four and five co-ordinate carbonyl stibine complexes of rhodium. Crystal Structures of trans-[Rh(Cl)(CO)(SbPh3)2], trans-[Rh(Cl)(CO)(SbPh3)3] and trans-[Rh(I)2(CH3)(CO)(SbPh3)2]

The crystal structures of the four-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₂] (1) and the five-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₃] (2) are reported, as well as the unexpected oxidative addition product, trans-[Rh(I)₂(CH₃)(CO)(SbPh₃)₂] (3), obtained from the reaction of 2 with CH₃I. The formation constants of the five-coordinate complex were determined in dichloromethane, benzene, diethyl ether, acetone and ethyl acetate as 163±8, 363±10, 744±34, 1043±95 and 1261±96 M⁻¹, respectively. While coordinating solvents facilitate the formation of the five-coordinate complex, the four-coordinate complex could be obtained from diethyl ether due to the favorable low crystallization energy. The tendency of stibine ligands to form five-coordinate rhodium(I) complexes is attributed mainly to electron deficient metal centers in these systems, with smaller contributions by the steric effects. The average effective cone angle for the SbPh₃ ligand in the three crystallographic studies was determined as 139° with individual values ranging from 133 to 145°.     

New rhodium complexes of the tetradentate ligand bis(diacetylmonoxime-imino)propane 1,3 (H2dopn): synthesis and crystal structure of trans-[Rh(Hdopn)Cl]2 and trans-[Rh(Hdopn)(I)2]

The reaction between [Rh(H₂O)₆](ClO₄)₃ and the monoanion Hdopn⁻ (H₂dopn=bis(diacetylmonoxime-imino)propane 1,3=3,9-dimethyl-4,8-diazaundeca-3,8-diene-2,10-dione dioxime) afforded a new dimeric rhodium(II) compound of formula [Rh(Hdopn)(H₂O)]₂(ClO₄)₂ · H₂O (1). Treatment of methanolic solution of 1 with NaX (X=Cl⁻, Br⁻, I⁻) results in the replacement of water with halides in 1, leading to the formation of [Rh(Hdopn)X]₂ rhodium(II) dimers. The X-ray crystal structure of [Rh(Hdopn)Cl]₂ · 0.5H₂O (2) was determined showing a [Rh(II)-Rh(II)] core. Upon the reaction of 1 with NaI carried out in air, [Rh(Hdopn)(I)₂] (3) was isolated and characterized by a single-crystal X-ray diffraction analysis.     

Five-coordinate rhenium(III)-thiolato complexes: the structure of [Re(SCH2PhOCH3)3(PPh3)2]

A novel five-coordinate rhenium(III)-thiolato complex, Re(SCH₂C₆H₄OCH₃-p)₃(PPh₃)₂ has been isolated during the reaction of trans-ReOCl₃(PPh₃)₂ with p-methoxybenzyl mercaptan. In the unexpected structure that was acquired, the central metal has undergone a reduction from Re(V) to Re(III). The five-coordinate Re(III) complex has been characterized by spectroscopic methods, elemental analysis and X-ray crystallography. X-ray crystallographic studies showed the coordination geometry around rhenium to be that of a trigonal bipyramid. The basal plane is defined by three sulfur atoms of the monodentate ligand, while the two apical positions are occupied by two phosphines of the precursor.     

Serendipitous syntheses of Rh(H)2Cl(PRPh2)3 complexes, and their crystal structures, where R = Me, Cy (cyclohexyl)

Reactions of RhCl(cod)(THP) (cod = 1,5-cyclooctadiene; THP = P(CH₂OH)₃) with PMePh₂ or PCyPh₂ (Cy = cyclohexyl) in acetone/MeOH solution under H₂ surprisingly form the complexes cis, mer-Rh(H)₂Cl(PRPh₂)₃ (R = Me or Cy); both complexes are characterized by crystallography (the first structures in which the hydride ligands of such dihydrido-chloro-trisphosphine complexes have been located), and by detailed ¹H and ³¹P NMR spectroscopy. The key role of the THP in the observed chemistry is discussed.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Thermal and photochemical substitution reactions of CpRe(PPh3)2H2 and CpRe(PPh3)H4. Catalytic insertion of ethylene into the C-H bond of benzene

The thermal and photochemical reactions of CpRe(PPh₃)₂H₄ and CpRe(PPh₃)H₄ (Cp = η⁵-C₅H₅) with PMe₃, P(p-tolyl)₃, PMe₂Ph, DMPE, DPPE, DPPM, CO, 2,6-xylylisocyanide and ethylene have been examined. While CpRe(PPh₃)₂H₂ is thermally inert, it will undergo photochemical substitution of one or two PPh₃ ligands. With ethylene, substitution is followed by insertion of the olefin into the C-H bond of benzene, giving ethylbenzene. CpRe(PPh₃)H₄ undergoes thermal loss of PPh₃, which leads to substituted products of the type CpRe(L) H₄. Photochemically, reductive elimination of dihydrogen occurs preferentially. The complex trans-CpRe(DMPE)H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 6.249(6), b = 16.671(8), c = 13.867(7) Å, β = 92.11(6)°, V = 1443.7(2.9) Å and Z = 4. The complex trans-CpRe(PMe₂Ph)₂H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 7.467(3), b = 23.874(14), c = 11.798(6) Å, β = 100.16(4)°, V = 2070.2(3.4) ų and Z = 4.     

The rhodium(III) trisacetonitrile complexes: a re-investigation of the synthesis of fac- and mer- [RhCl3(CH3CN)3], their characterization by 2D NMR spectroscopy and the X-ray crystal structure of mer-[RhCl3(CH3CN)3] · CH3CN

It is shown that the reaction of RhCl₃·3H₂O with acetonitrile normally produces mixtures of mer- and fac-[RhCl₃(CH₃CN)₃] (1a and 1b, respectively). The IR and ¹H NMR spectra of these isomers were re-investigated. Their two-dimensional (¹⁰³Rh,¹H) NMR spectra were also recorded. Equilibrium and exchange studies of 1a and 1b in CD₃C were performed. It was found that in 1a the exchange rate of the nitrile molecule trans to Cl is much faster than those of mutually trans nitriles. Also the nitrile molecules in 1b underwent fast exchange in CD₃CN; however, their rate was slightly faster than that of the more labile CH₃CN in 1a. The X-ray crystal structure of mer-[RhCl₃(CH₃CN)₃]·CH₃CN (1c) was determined. Crystal data: triclinic space group

Full-size image

.     

Cyano-bridged cluster-metal coordination compound: synthesis and crystal structure of [Cu(NH3)3][Cu(NH3)4][Cu(NH3)5][W4Te4(CN)12]·5H2O

Dark-brown single crystals of the title compound 1 were obtained in high yield by layering a CuCl₂ solution in 25% aqueous ammonia on a glycerol solution of K₆[W₄Te₄(CN)₁₂]·5H₂O. The complex 1 was characterized by single crystal X-ray diffraction analysis and IR spectroscopy. The X-ray structure of 1 reveals a polymeric chain cyano-bridged cluster-metal coordination compound. The [W₄Te₄(CN)₁₂]⁶⁻ cluster anions are linked one to another by Cu²⁺ cations through coordination by nitrogen atoms of the CN groups.     

Electrochemical synthesis and crystal structure of (3-trimethylsilylpyridine-2-thiolato) copper(I), [Cu4(3-Me3Sipyt)4]

(3-Trimethylsilyl-pyridine-2-thiolato-S,N)copper(I), [Cu(3-Me₃Sipyt)], was obtained by electrochemical oxidation of copper metal in an acetonitrile solution of the neutral ligand. The compound is tetrameric and the four copper atoms are arranged with distorted tetrahedral geometry, each copper atom being trigonally coordinated to one nitrogen and two sulfur atoms of three different ligands. Crystal data: 14₁/a, a=14.608(2), C=19.366(4) Å, V=4133(2), Å, Z=4, D_calc=1.581 g cm⁻³, R=0.0397 for 848 reflections.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Coordination chemistry of the metalloligand [Pt2(μ-S)2(PPh3)4] with nickel(II) complexes - an electrospray mass spectrometry directed synthetic study

The reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of nickel(II) complexes has been probed using electrospray ionisation mass spectrometry coupled with synthesis and characterisation in selected systems. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with [Ni(NCS)₂(PPh₃)₂] gives [Pt₂(μ-S)₂(PPh₃)₄Ni(NCS)(PPh₃)]⁺, isolated as its BPh₄ ⁻ salt; the same product is obtained in the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with [NiBr₂(PPh₃)₂] and KNCS. An X-ray structure determination reveals the expected sulfide-bridged structure, with an N-bonded thiocyanate ligand and a square-planar coordination geometry about nickel. A range of nickel(II) complexes NiL₂, containing β-diketonate, 8-hydroxyquinolinate, or salicylaldehyde oximate ligands react similarly, giving [Pt₂(μ-S)₂(PPh₃)₄NiL]⁺ cations.     

Catalytic and electrochemical properties of new manganese(III) compounds of 2-(2′-hydroxyphenyl)-oxazoline (Hphox or HClphox). Molecular structures of [Mn(Clphox)2(MeOH)2](ClO4) and [Mn(phox)2(MeOH)2][Mn(phox)2(ClO4)2](H2O)2

New manganese(III) complexes of Hphox (2-(2′-hydroxyphenyl)-oxazoline) and HClphox (2-(5′-chloro-2′-hydroxyphenyl)-oxazoline) have been synthesised. The X-ray structures of [Mn(phox)₂(MeOH)₂][Mn(phox)₂(ClO₄)₂](H₂O)₂ and [Mn(Clphox)₂(MeOH)₂](ClO₄) show the manganese(III) ions to be octahedrally coordinated with methanol or perchlorate at the axial coordination sites. The cyclic voltammograms of the complexes, with the exception of [Mn(phox)₂(acac)] (Hacac=2,4-pentanedione), show an irreversible reduction wave of manganese(III) to manganese(II). After addition of an excess of 1-methylimidazole (1-Meim), the reduction process shifts towards lower potentials and becomes (quasi-) reversible, indicating that the presence of 1-Meim affects the catalytic efficiency of the complexes. The complexes catalyse the epoxidation of styrene by dihydrogen peroxide. The cumulative turnover numbers towards styrene oxide obtained after 15 min. vary from 16 for [Mn(Clphox)₂(MeOH)₂](ClO₄) to 26 for [Mn(phox)₂(acac)]. Ligand degradation appears to be the limiting factor for obtaining higher turnover numbers.     

Oxidative addition of methyl iodide to [Rh(CH3COCHCOCH3)(CO)(P(OCH2)3CCH3)]

The reaction rate of the oxidative addition and the following CO insertion step of methyl iodide with [Rh(acac)(CO)(P(OCH₂)₃CCH₃)] is determined. The key finding is that while [Rh(acac)(CO)(P(OCH₂)₃CCH₃)] oxidatively adds methyl iodide ca 300 times faster than the Monsanto catalyst, the CO insertion step is much slower. However, the rate-determining step of the oxidative addition reaction of the phosphorus-containing acetylacetonato-rhodium(I) complex, the carbonyl insertion step, is still in the same order or faster than the rate-determining oxidative addition step of iodomethane to [Rh(CO)₂I₂]⁻.     

Synthesis and crystal structure of tetranuclear copper(I) and silver(I) complexes bridged by 2-amino-1,3,4-thiadiazole (atdz): [Cu4(atdz)6](ClO4)4·2CH3OH and [Ag4(atdz)6](ClO4)4

Two novel tetracopper(I) and tetrasilver(I) complexes [Cu₄(atdz)₆](ClO₄)₄·2CH₃OH (1) and [Ag₄(atdz)₆](ClO₄)₄ (2), have been prepared using 2-amino-1,3,4-thiadiazole (atdz), and their crystal structures and properties have been determined. On each tetranuclear complex, two Cu or Ag atoms (M) are bridged by two atdz ligands to form a six-membered N₂M₂N₂ framework. The two N₂M₂N₂ frameworks are in parallel linked by another atdz ligand to provide the tetranuclear structure with a rectangular M₄ core. The four Cu or Ag atoms possess a trigonal-square geometry. The two adjacent MM separations are (3.096(1) and 3.412(1) Å) and (3.316(2) and 3.658(2) Å) for 1 and 2, respectively. On both tetranuclear complexes there are two species of hydrogen bonds between the ClO₄ ⁻ anions and the NH₂ group of atdz ligands. It is proposed that the hydrogen bonds are related to the stabilization of the tetranuclear structure during the crystallization process.     

Reductive thiocyanolysis of tetraoxorhenate (VII): Synthesis, crystal structure, catalytic oxidation and kinetic studies of (PPh4)2[Re(NCS)6] and (PPh4)2[ReO(NCS)5]

Thiocyanate ions reduce perrhenate in aqueous acidic solution, and on addition of a suitable countercation (PPh₄Cl) afford (PPh₄)₂[Re(NCS)₆] (1) and (PPh₄)₂[ReO(NCS)₅] (2), which have been confirmed by X-ray crystallography. The kinetics of the above reaction has been studied. Both the complexes exhibit efficient and highly selective catalytic epoxidation ability in the presence of NaHCO₃ as a co-catalyst and competent catalytic properties in the selective oxidation of alcohols to the corresponding aldehydes or ketones in the presence of pyrazole as an additive and sulfides to sulfoxides and sulfones. H₂O₂ was used as the terminal oxidant in all the above-mentioned oxidation reactions.     

Intermolecular Re---H·H---X hydrogen bonding (X = N, C) involving ReH5(PPh3)3

Ab initio (B3LYP) calculations show that PD·H---ReH₄(PH₃)₃ (PD = Proton donor) interactions follow the order PD = pyrrole > NH₃ > HCCH > C₂H₄ > CH₃---H 0 and decrease with the pK_a of the PD. For equivalent pK_a's, NH interacts more strongly than CH. However, intermolecular hydrogen-bonding of the M---H·H---C type is too weak to be detected experimentally in FTIR or UV-vis studies between ReH₅(PPh₃)₃ and PhCCH, C₆F₅H or PhCHCl₂.     

The synthesis of the tripodal phosphine CH3C{CH2P(m-CF3C6H4)2}3 and its rhodium coordination chemistry

The new tripodal phosphine CH₃C{CH₂P(m-CF₃C₆H₄)₂}₃, CF₃PPP, was prepared by reacting CH₃C(CH₂Br)₃ with Li⁺P(m-CF₃C₆H₄)₂⁻, the latter being best obtained by adding Li⁺NⁱPr₂⁻ to PH(m-CF₃C₆H₄)₂. The rhodium complexes [RhCl(CO)(CF₃PPP)], [Rh(LL)(CF₃PPP)](CF₃SO₃) (LL = 2 CO or NBD), [RhX₃(CF₃PPP)], [RhX(MeCN)₃(CF₃PPP)](CF₃SO₃)₂ (X = H and Cl), [RhCl₂(MeCN)(CF₃PPP)](CF₃SO₃) and [Rh(MeCN)₃(CF₃PPP)](CF₃SO₃)₃ were prepared and characterized. The X-ray crystal structure of [Rh(NBD)(CF₃PPP)](CF₃SO₃) is reported. The lower oxygen sensitivity of the CF₃PPP rhodium(I) complexes, relative to the corresponding species with the parent ligand CH₃C(CH₂PPh₂)₃, is attributed to the higher effective nuclear charge on the metal centers caused by the presence of the six CF₃ substituents on the terdentate phosphine. A similar effect may be responsible for the easier hydrolysis of the CF₃PPP-containing, cationic rhodium(III) complexes relative to the corresponding compounds of the parent ligand.     

Synthesis and problematic crystal structures of [Al(CH3CN)6][MCl6]3(CH3CN)3 (M=Ta, Nb or Sb)

Compounds of formula [Al(CH₃CN)₆][MCl₆]₃(CH₃CN)₃ (M=Ta (1); Nb (2); Sb (3)) have been synthesized from the reactions of MCl₅ and AlCl₃ in acetonitrile and characterized by X-ray crystallography. Complex 1 crystallizes in the tetragonal space group P4/mbm with a = B = 10.408(2), C = 7.670(3) Å, V = 830.9(4) ų and Z = 2/3. Complex 2 crystallizes in the tetragonal space group P4/mnc with a = B = 330(a), C = 15.320(3) ų V = 1634.8(4) ų and Z = 4/3. Complex 3 also crystallizes in the tetragonal space group P4/mnc with a = B = 10.313(1), C = 15.238(2) Å, V = 1621.0(1) ų and Z = 4/3. The non-integer Z values for complexes 1–3 result unusual problems of disorder and/or twinning in these crystal structures due to their high symmetry. The M---Cl distances range from 2.329(3) Å in the Ta complex to 2.355(1) Å in the Sb complex, while the Al---N distances are similar in all three complexes, ranging from 1.92(1) to 1.97(1) Å, respectively. Complexes 1–3 are the first structurally characterized complexes that contain a (hexaacetonitrile)aluminum(III) cation.