Modes of ontogenetic allometric shifts in crocodylian vertebrae

During postnatal ontogeny of vertebrates, allometric trends in certain morphological units or dimensions can shift drastically among isometry, positive allometry, and negative allometry. However, detailed patterns of allometric transitions in certain timings have not been explored well. Identifying the presence and nature of allometric shifts is essential for understanding the patterns of changes in relative size and shape and the proximal factors that are controlling these changes mechanistically. Allometric trends in 10 selected vertebrae (cervical 2–caudal 2) from hatchlings to very mature individuals of Alligator mississippiensis (Archosauria, Crocodylia) are reported in the present study. Allometric coefficients in 12 vertebral dimensions are calculated and compared relative to total body length, including centrum, neural spine, transverse process, zygapophysis, and neural pedicle. During the postnatal growth, positive allometry is the most common type of relative change (10 of the 12 dimensions), although the diameter of the neural canal shows a negative allometric trend. However, when using spurious breaks (i.e. allometric trends subdivided into growth stages using certain growth events, and key body sizes and/or ages), vertebral parts exhibit various pathways of allometric shifts. Based on allometric trends in three spurious breaks, separated by the end of endochondral ossification (body length: approximnately 0.9 m), sexual maturity (1.8 m), and the stoppage of body size increase (2.8 m), six types of ontogenetic allometric shifts are established. Allometric shifts exhibit a wide range from positive allometry restricted only in the early postnatal stage (Type I) to life‐long positive allometry (Type VI). This model of ontogenetic allometric shifts is then applied to interpret potential mechanisms (causes) of allometric changes, such as (1) growth itself (when allometric trend gradually decreases to isometric or negative allometric change: Type II–IV allometric shift); (2) developmental constraint (when positive allometry is limited only in the early growth stage: Type I allometric shift); and (3) functional or biomechanical drive (when positive allometry continues throughout ontogeny: Type VI allometric shift).     

Ontogenetic allometry and body composition of the common bottlenose dolphin (Tursiops truncatus) from the U.S. mid‐Atlantic

Growth in common bottlenose dolphins (Tursiops truncatus) was investigated through examination of sex‐specific, ontogenetic changes in the mass of 38 discrete body compartments, utilizing stranded dolphins in good body condition (n = 145). Ontogenetic allometry and the body composition technique were used to quantitatively describe growth patterns. Although adult males were significantly larger than adult females in total body mass (TBM) and total length, overall patterns of growth were remarkably similar between sexes. The integument, locomotor muscle, and vertebral column together represented 50%–58% of TBM across all life history categories, although their relative contributions varied ontogenetically. Young dolphins invested the greatest percentage of TBM in integument, while locomotor muscle was the single largest body component in adults. In both sexes (1) most muscle groups displayed positive allometry, (2) most skeletal elements displayed negative allometric or isometric growth, (3) most abdominal viscera associated with digestion displayed positive allometry, and (4) the brain displayed negative allometric growth. Reproductive tissues exhibited the highest rates of growth in both sexes, and increased as a percentage of TBM with maturity. This study provides an integrated view of bottlenose dolphin growth and a quantitative baseline of body composition for future monitoring of this sentinel species of ecosystem health.     

Genital and body allometry in two species of noctuid moths (Lepidoptera: Noctuidae)

One‐size‐fits‐all and related hypotheses predict that static allometry slopes for male genitalia will be consistently lower than 1.0 and lower than the slopes for most other body parts (somatic traits). We examined the allometry of genitalic and somatic morphological traits in males and females of two species of noctuid moths, Spodoptera exigua (Hübner, [1808]) and Helicoverpa armigera (Hübner, [1808]). The relationship between genitalic traits and body size was generally strongly negative‐allometric in males but with no significant differences from 1.00 in females of the two species examined. However, in females, the slope of genital traits was also lower than the slopes for somatic traits. The relationship between somatic traits and the body size indicator was approximately isometric in most cases in males, except in four traits in S. exigua, in which the slopes showed slight negative allometry, and the hind tibia in H. armigera, in which the slope had positive allometry. However, in females, some somatic traits showed isometric and some other showed negative allometry in both species. The coefficients of variation (CV) for all structures in the males were low, not exceeding 10%. Genitalic traits showed significantly lower CV than somatic traits in males. In females, somatic traits showed lower CV than genitalic traits but with no significant difference in the H. armigera. Our observations of strongly negative allometry for genitalic traits in males are consistent with stabilizing selection on genital size and we suggest that male performance in interactions with females is the source of selection on male genital allometry. The difference in the degree of phenotypic variation between genitalic and somatic traits in the two studied species is attributed to the different developmental‐genetic architectures of these traits. Female genitalia showed a similar trend to the males, although the difference between genital and somatic traits was not significant in females. This finding suggests that selection is acting differently on male and female genitalia. Positive allometry of hind tibia in H. armigera may be a result of secondary sexual function.     

Allometry of the baculum and sexual size dimorphism in American martens and fishers (Mammalia: Mustelidae)

Genitalia are among the most variable of morphological traits, and recent research suggests that this variability may be the result of sexual selection. For example, large bacula may undergo post‐copulatory selection by females as a signal of male size and age. This should lead to positive allometry in baculum size. In addition to hyperallometry, sexually selected traits that undergo strong directional selection should exhibit high phenotypic variation. Nonetheless, in species in which pre‐copulatory selection predominates over post‐copulatory selection (such as those with male‐biased sexual size dimorphism), baculum allometry may be isometric or exhibit negative allometry. We tested this hypothesis using data collected from two highly dimorphic species of the Mustelidae, the American marten (Martes americana) and the fisher (Martes pennanti). Allometric relationships were weak, with only 4.5–10.1% of the variation in baculum length explained by body length. Because of this weak relationship, there was a large discrepancy in slope estimates derived from ordinary least squares and reduced major axis regression models. We conclude that stabilizing selection rather than sexual selection is the evolutionary force shaping variation in baculum length because allometric slopes were less than one (using the ordinary least squares regression model), a very low proportion of variance in baculum length was explained by body length, and there was low phenotypic variability in baculum length relative to other traits. We hypothesize that this pattern occurs because post‐copulatory selection plays a smaller role than pre‐copulatory selection (manifested as male‐biased sexual size dimorphism). We suggest a broader analysis of baculum allometry and sexual size dimorphism in the Mustelidae, and other taxonomic groups, coupled with a comparative analysis and with phylogenetic contrasts to test our hypothesis. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 104 , 955–963.     

Patterns of growth in the presacral vertebral column of the leopard gecko (Eublepharis macularius)

Postnatal growth patterns within the vertebral column may be informative about body proportions and regionalization. We measured femur length, lengths of all pre‐sacral vertebrae, and lengths of intervertebral spaces, from radiographs of a series of 21 Eublepharis macularius, raised under standard conditions and covering most of the ontogenetic body size range. Vertebrae were grouped into cervical, sternal, and dorsal compartments, and lengths of adjacent pairs of vertebrae were summed before analysis. Femur length was included as an index of body size. Principal component analysis of the variance‐covariance matrix of these data was used to investigate scaling among them. PC1 explained 94.19% of total variance, interpreted as the variance due to body size. PC1 differed significantly from the hypothetical isometric vector, indicating overall allometry. The atlas and axis vertebrae displayed strong negative allometry; the remainder of the vertebral pairs exhibited weak negative allometry, isometry or positive allometry. PC1 explained a markedly smaller amount of variance for the vertebral pairs of the cervical compartment than for the remainder of the vertebral pairs, with the exception of the final pair. The relative standard deviations of the eigenvalues from the PCAs of the three vertebral compartments indicated that the vertebrae of the cervical compartment were less strongly integrated by scaling than were the sternal or dorsal vertebrae, which did not differ greatly between themselves in their strong integration, suggesting that the growth of the cervical vertebrae is constrained by the mechanical requirements of the head. Regionalization of the remainder of the vertebral column is less clearly defined but may be associated with wave form propagation incident upon locomotion, and by locomotory changes occasioned by tail autotomy and regeneration. Femur length exhibits negative allometry relative to individual vertebral pairs and to vertebral column length, suggesting a change in locomotor requirements over the ontogenetic size range.     

Cyclomorphosis in Daphnia: an adaptation to avoid invertebrate predation

Seasonal morphological changes in three Daphnia species were followed over a two-year period in two lakes that differ in invertebrate and fish pressure. Whereas the morphology of D. hyalina, the biggest of the three species, varied little from season to season, D. cucullata, the smallest, exhibited the most pronounced seasonal changes in head height/carapace length ratio. The pattern of seasonal changes of body proportions was similar in all size classes and isometric growth of the head was reported for D. cucullata. Unlike the head, tail spine length/carapace length ratio almost did not vary seasonally. Strong negative allometry of tail spine growth was observed. These results are consistent with the hypothesis that helmets and tail spines provide protection against invertebrates in the two smallest, thus most endangered species.     

Development of secondary sexual characters in the seabob shrimp Xiphopenaeus kroyeri (Heller 1862) (Crustacea,Decapoda, Penaeidae): a scanning electron microscope study

The development of secondary sexual characters, the petasma, and thelycum growth were studied in Xiphopenaeus kroyeri. In adult females, the thelycum is a single plate and its anterolateral portion is characterized by a reduced hood. The aperture resembles a transverse ridge. In immature stages, the ridge has a space between the plates, which becomes narrower as it reaches the end of development. The female gonopore is ‘comma’ shaped. In adult males, the endopods of the petasma are linked at the dorsomedial margin by a large quantity of cincinnuli. In juveniles, cincinnuli gradually increase in number until they join both endopods. At the end of development the petasma is T-shaped. The male gonopore is C-shaped. The relative growth of the petasma total length versus juvenile body length showed a highly positive allometry, whereas in adults the growth was isometric. For the relationship carapace length versus thelycum width, the juvenile phase of females is characterized by an isometry and the adult phase by a negative allometry.     

Heritability of male mandible length in the stag beetle Cyclommatus metallifer

Numerous coleopteran species express male‐specific “weapon traits” that often show size variations among males, even within a single population. Many empirical studies have demonstrated that environmental conditions during development affect absolute weapon size. However, relatively few studies in horned beetles support the hypothesis that the relationship between weapon size and body size, also referred to as a “scaling relationship” or “static allometry”, is largely determined by genetic factors. In this study, the heritability of absolute mandible length and static allometry between mandible length and body size were estimated in the stag beetle Cyclommatus metallifer. While no significant heritable variation was observed in absolute mandible length, high heritability (h² = 0.57 ± 0.25) was detected in the static allometry between mandible length and body size. This is the first report on the genetic effect on male mandible size in Lucanidae, suggesting that absolute mandible size is largely determined by environmental conditions while the static allometry between weapon size and body size is primarily determined by genetic factors.     

Skull allometry in the marine toad,Bufo marinus

Scaling predictions pioneered by A.V. Hill state that isometric changes in kinematics result from isometric changes in size. These predictions have been difficult to support because few animals display truly isometric growth. An exception to this rule is said to be the toads in the genus Bufo, which can grow over three orders of magnitude. To determine whether skull shape increases isometrically, I used linear measurements and geometric morphometrics to quantify shape variation in a size series of 69 skulls from the marine toad, B. marinus. Toads ranged in body mass from 1.8 gm to a calculated 1,558.9 gm. Of all linear measurements (S/V length, skull width, skull length, levator mass, depressor mass, adductor foramen area), only the area of the adductor foramen increased faster than body mass; the remaining variables increased more slowly. In addition, modeling the lower jaw as a lever‐arm system showed that the lengths of the closing in‐ and out‐levers scaled isometrically with body mass despite the fact that the skull itself is changing allometrically. Geometric morphometrics discerned areas of greatest variability with increasing body mass at the rear of the skull in the area of the squamosal bone and the adductor foramen. This increase in area of the adductor foramen may allow more muscle to move the relatively greater mass of the lower jaw in larger toads, although adductor mass scales with body mass. If B. marinus feeds in a similar manner to other Bufo, these results imply that morphological allometry may still result in kinematic isometry. J. Morphol. 241:115–126, 1999. © 1999 Wiley‐Liss, Inc.     

Sharing morphospaces: early ontogenetic shape changes in two clingfish larvae (Pisces: Gobiesocidae) from the south‐east Pacific Ocean

Larval body shape changes and developmental timing were examined in two clingfish species from the south‐east Pacific Ocean, Gobiesox marmoratus and Sicyases sanguineus. Ontogenetic allometry showed no interspecific variation and <7 mm standard length (L_S) larvae of both species occupied similar morphospace, but larger G. marmoratus showed increased body depth while larvae of S. sanguineus developed a flattened head and maintained a hydrodynamic body. Estimated developmental timing suggests that larval body shape changes were faster in G. marmoratus than in S. sanguineus prior to settlement.     

Musculoskeletal determinants of pelvic sucker function in hawaiian stream gobiid fishes: Interspecific comparisons and allometric scaling

Gobiid fishes possess a distinctive ventral sucker, formed from fusion of the pelvic fins. This sucker is used to adhere to a wide range of substrates including, in some species, the vertical cliffs of waterfalls that are climbed during upstream migrations. Previous studies of waterfall‐climbing goby species have found that pressure differentials and adhesive forces generated by the sucker increase with positive allometry as fish grow in size, despite isometry or negative allometry of sucker area. To produce such scaling patterns for pressure differential and adhesive force, waterfall‐climbing gobies might exhibit allometry for other muscular or skeletal components of the pelvic sucker that contribute to its adhesive function. In this study, we used anatomical dissections and modeling to evaluate the potential for allometric growth in the cross‐sectional area, effective mechanical advantage (EMA), and force generating capacity of major protractor and retractor muscles of the pelvic sucker (m. protractor ischii and m. retractor ischii) that help to expand the sealed volume of the sucker to produce pressure differentials and adhesive force. We compared patterns for three Hawaiian gobiid species: a nonclimber (Stenogobius hawaiiensis), an ontogenetically limited climber (Awaous guamensis), and a proficient climber (Sicyopterus stimpsoni). Scaling patterns were relatively similar for all three species, typically exhibiting isometric or negatively allometric scaling for the muscles and lever systems examined. Although these scaling patterns do not help to explain the positive allometry of pressure differentials and adhesive force as climbing gobies grow, the best climber among the species we compared, S. stimpsoni, does exhibit the highest calculated estimates of EMA, muscular input force, and output force for pelvic sucker retraction at any body size, potentially facilitating its adhesive ability. J. Morphol. 2013. © 2013 Wiley Periodicals, Inc.     

Allometry between leg and body length of insects: lack of support for the size–grain hypothesis

• 1 The size–grain hypothesis ( Kaspari & Weiser, 1999 ) states that (1) as organisms decrease in size, they perceive their environment as being more rugose; (2) long legs allow organisms to step over obstacles but hinder them from entering small gaps; and (3) as the size of an organism decreases, the benefits of long legs begin to be outweighed by the costs of construction. Natural selection should therefore favour proportionally longer legs in larger organisms, thereby leading to a positive allometry between leg and body length (scaling exponent b > 1).
• 2 Here we compare the scaling exponent of leg‐to‐body length relationships among insects that walk, walk and fly, and predominantly fly. We measured the lengths of the hind tibia, hind femur, and body length of each species.
• 3 The taxa varied considerably in the scaling exponent b. In seven out of ten groups (Formicidae, Isoptera, Carabidae, Pentatomidae, Apidae, Lepidoptera, Odonata adult), b was significantly greater than one. However, there was no gradual decrease in b from walking to walking/flying to flying insects.
• 4 The results of the present study provide no support for the size–grain hypothesis. We propose that leg length is not only affected by the rugosity of the environment, but also by (1) functional adaptations, (2) phylogeny, (3) lifestyle, (4) the type of insect development (hemimetabolism or holometabolism), and (5) constraints of gas exchange.

     

Postnatal long bone growth in terrestrial placental mammals: Allometry,life history,and organismal traits

The ontogenetic allometry of long bone proportions is poorly understood in Mammalia. It has previously been suggested that during mammalian ontogeny long bone proportions grow more slender (positive allometry; length ∝ circumference^>1.0), although this conclusion was based upon data from a few small‐bodied taxa. It remains unknown how ontogenetic long bone allometry varies across Mammalia in terms of both taxonomy and body size. We collected long bone length and circumference data for ontogenetic samples of 22 species of mammals spanning six major clades and three orders of magnitude in body mass. Using reduced major axis bivariate regressions to compare bone length to circumference, we found that isometry and positive allometry are the most widespread patterns of growth across mammals. Negative allometry (i.e., bones growing more robust during ontogeny) occurs in mammals but is largely restricted to cetartiodactyls. Using regression slope as a proxy for long bone allometry, we compared long bone allometry to life history and organismal traits. Neonatal body mass, adult body mass, and growth rate have a negative relationship with long bone allometry. At an adult mass of roughly 15–20 kg, long bone growth shifts from positive allometry to mainly isometry and negative allometry. There were no significant relationships between ontogenetic long bone allometry and either cursoriality or basal metabolic rate. J. Morphol. © 2012 Wiley Periodicals, Inc.     

Relative growth of the limbs and trunk in the African apes

Examination of relative growth and allometry is important for our understanding of the African apes, as they represent a closely related group of species of increasing body size. This study presents a comparison of ontogenetic relative growth patterns of some postcranial dimensions in Pan paniscus, Pantroglodytes, and Gorilla gorilla. Interspecific proportion differences among the three species are also analyzed. It is stressed that reliable ontogenetic information can only be obtained if subadults are examined-growth data cannot be inferred from static adult scaling. Results indicate that some postcranial relative growth patterns are very similar in the three species, suggesting differential extrapolation of a common growth pattern, whereas for other proportion comparisons the growth trends differ markedly among the species, producing distinct shape differences in the adults Interspecific shape changes among the three species are characterized by positive allometry of chest girth and negative allometry of body height and leg length. It is suggested that relative decrease of leg length with increasing body size among the African pongids might be expected on biomechanical grounds, in order to maintain similar locomotor abilities of climbing arborealism and quadrupedal terrestrialism. Relative to body weight or trunk length, the limbs of the bonobo (Pan paniscus) are longer than in the common chimpanzee or the gorilla, with a lower intermembral index. This may most closely resemble the primitive condition for the African apes.     

Variation in the ontogenetic allometry of horn length in bovids along a body mass continuum

Allometric relationships describe the proportional covariation between morphological, physiological, or life‐history traits and the size of the organisms. Evolutionary allometries estimated among species are expected to result from species differences in ontogenetic allometry, but it remains uncertain whether ontogenetic allometric parameters and particularly the ontogenetic slope can evolve. In bovids, the nonlinear evolutionary allometry between horn length and body mass in males suggests systematic changes in ontogenetic allometry with increasing species body mass. To test this hypothesis, we estimated ontogenetic allometry between horn length and body mass in males and females of 19 bovid species ranging from ca. 5 to 700 kg. Ontogenetic allometry changed systematically with species body mass from steep ontogenetic allometries over a short period of horn growth in small species to shallow allometry with the growth period of horns matching the period of body mass increase in the largest species. Intermediate species displayed steep allometry over long period of horn growth. Females tended to display shallower ontogenetic allometry with longer horn growth compared to males, but these differences were weak and highly variable. These findings show that ontogenetic allometric slope evolved across species possibly as a response to size‐related changes in the selection pressures acting on horn length and body mass.     

Do exaggerated chelicerae function as weapons or genitalia in a long‐jawed spider? Functional allometric analysis yields an answer

From the elongated neck of the giraffe to the elaborate train of the peacock, extreme traits can result from natural or sexual selection (or both). The extreme chelicerae of the long‐jawed spiders (Tetragnatha) present a puzzle: do these exaggerated chelicerae function as weapons or genitalia? Bristowe first proposed that Tetragnatha chelicerae function as a holdfast because these spiders embrace chelicerae during mating. This hypothesis has remained untested until now. Here, we use functional allometry to examine how extreme chelicerae develop and perform in the long‐jawed spider Tetragnatha elongata. Similar to other Tetragnatha species, chelicerae were longer in adult males than in adult females. Overall, we confirm Bristowe's hypothesis: elongation only occurred in the adult stage. However, we propose that chelicerae function as more than a holdfast in T. elongata. Male chelicerae exhibited positive allometry, which suggests scaling as weapons rather than genitalia. However, fieldwork revealed that the operational sex ratio is female‐biased and both adult male–male competition and sexual cannibalism were rarely observed. Consequently, we propose that the positive allometry of male chelicerae may result from sexual selection to mechanically mesh with larger and more fecund females. Evidence for mechanical mesh includes multiple traits ranging from apophyses and grooves to guide teeth on the basal portion of the chelicerae. In contrast, we propose that chelicerae of females are analogous to the female peacock's tail: shortened by natural selection limiting the exaggeration of sexually selected traits. Indeed, females had increased foraging efficiency compared to males and exhibited negative cheliceral allometry. We discuss the implications for the evolution of elongated chelicerae in Tetragnatha.     

Postnatal growth allometry of the extremities in Cebus albifrons and Cebus apella: A longitudinal and comparative study

Cebus albifrons and Cebus apella, partially sympatric capuchin monkeys from South America, are known to differ substantially in adult body mass and bodily proportions. C. apella possesses a robust, stocky build in contrast to the more gracile, relatively longer limbed body design of C. albifrons. Average birth weights and adult body lengths of these two congeners, however, are remarkably similar and do not serve to distinguish them. This study examines longitudinal growth rates and patterns of ontogenetic scaling in the extremities (humerus, radius, hand, femur, tibia, foot) in order to document the nature and magnitude of skeletal changes associated with increasing age and body mass. Our data indicate that the growth rates of the six skeletal components of the limbs differ only slightly and somewhat inconsistently between the two species. Body mass, however, increases at a consistently faster rate in C. apella. Relative to body mass, therefore, the extremities of C. albifrons scale much faster than those of C. apella. This implies that at any given postnatal body mass, C. albifrons is longer limbed than C. apella. Conversely, C. apella is heavier than C. albifrons at any given limb length or age. We suggest that such differences in body mass distribution are causally related to differences in locomotor behavior and foraging strategies. Specifically, the relatively long-limbed C. albifrons is probably more cursorial and tends to travel longer distances each day than C. apella. C. apella is a much more deliberate quadruped and is also characterized by especially vigorous and powerful foraging and feeding behaviors. We also compare our results to other (mostly cross-sectional) studies of skeletal growth allometry in nonhuman primates.     

Allometry of a sexual trait in relation to diet experience and alternative mating tactics in two rubyspot damselflies (Calopterygidae: Hetaerina)

Several arguments have been put forward to explain how sexual selection drives the evolution of sexual trait allometry, especially hyperallometry. The ‘positive allometry theory’ suggests that hyperallometry is a rule in all‐secondary sexual traits, whereas the ‘display hypothesis’ suggests that only males in good condition will exhibit hyperallometric sexual display traits. In the present study, we investigated: (1) the condition‐dependence nature (by using two diet treatments that varied in the amount of food provided to the larvae) of a sexually selected trait (wing pigmentation; WP) in recently‐emerged adults of the American rubyspot damselfly, Hetaerina americana, and (2) the scaling relationship between WP and body size (wing and body length) in the rubyspot damselflies H. americana and Hetaerina vulnerata, according to alternative reproductive tactics (ARTs; territorial and nonterritorial males). First, we found support that indicated that diet positively affected WP length, although there was no significant WP allometric pattern in relation to diet regimes. Second, WP was hyperallometric in both Hetaerina species. WP size was similar between ARTs and, in H. americana (but not H. vulnerata), nonterritorial males showed steeper slopes than territorial males when wing length was used. The results obtained support the notion that sexual traits are hyperallometric, although there is no clear pattern in relation to ARTs. © 2013 The Linnean Society of London     

Sex‐specific differences in gonopore and gonadal growth trajectories in the brooding sea urchin,Abatus cavernosus (Spatangoida)

The heart urchin Abatus cavernosus shows sexual dimorphism characterized by the development of external brood pouches and the enlargement of gonopores in brooding females. Relationships between body size, gonopore size, and gonadal maturation in each sex were examined for inflection points using piecewise regression models (PRM). Opening of the gonopore occurred at 15.5 mm test length. Inflection points in the gonadal growth and gonopore diameter trajectories were clustered at smaller sizes in males (23 and 24.2 mm, respectively) than in females (25.1 and 25.9 mm), indicating sex‐specific differences in sexual maturation. Gonopore growth showed positive allometry at pre‐adult stages of development in both sexes, but isometry and negative allometry in adult females and males, respectively. Gonadal growth was initiated at smaller sizes and proceeded at a higher rate with increasing body size in males than in females. Identification of inflection points in gonopore and gonadal growth trajectories, using objective PRM, allows the determination of life stages and sexual maturation for individuals, thus providing a complementary tool for population studies.     

BACULAR AND TESTICULAR GROWTH AND ALLOMETRY IN THE CAPE FUR SEAL ARCTOCEPHALUS P. PUSILLUS (OTARIIDAE)

The baculum in Arctocephalus p. pusillus reaches up to 14.1 cm in length, 13.5 g in mass, and 1.3 g/cm in density (= mass/length). A pubertal growth spurt occurs between 2 and 3 yr of age, when bacular length increases by 28%, mass by 124%, and density by 77%; concurrently, body length increases by 14%. A second, weaker spurt occurs at social maturity (9-10 yr of age). Testes grow most rapidly between 1 and 2 yr of age, when testicular length increases by 29%. After 3 yr of age, growth in bacular and testicular length slows, and bacular mass continues to increase approximately linearly. Bacular and testicular lengths average 6.8% and 3.4% (respectively) of body length in adults, compared with 9.9% and 5.7% in the promiscuous harp seal ( Pagophilus groenlandicus ). Bacular length, mass, and density, and testicular length, are positively allometric to body length over growth; bacular length is isometric to testicular length. Among animals of the same age, bacular length and mass are positively allometric to body length in young animals, with negative allometry or isometry thereafter; testicular length is isometric to body length in young animals and negatively allometric thereafter. Patterns of early growth and allometry of the baculum and testes are interpreted as adaptations for mating opportunities, years before territoriality is possible. The baculum and testes of adult Cape fur seals and other otariids are small compared with those of most phocids, because sperm competition among male otariids is weak.